Zn(II) and Cu(II) unsymmetrical formamidine complexes as effective initiators for ring‐opening polymerization of cyclic esters

A series of Zn(II) and Cu(II) complexes were synthesized using unsymmetrical N,N′‐ diarylformamidine ligands, i.e. N‐(2‐methoxyphenyl)‐N′‐2,6‐dichorophenyl)‐formamidine ( L1 ), N‐(2‐methoxyphenyl)‐N′‐phenyl)‐formamidine ( L2 ), N‐(2‐methoxyphenyl)‐N′‐(2,6‐dimethylphenyl)‐formamidine ( L3 ) and N‐(2‐methoxyphenyl)‐N′‐(2,6‐diisopropylphenyl)‐formamidine ( L4 ). The complexes, [Zn₂( L1 )₂(OAc)₄] ( 1) , [Zn₂( L2 )₂(OAc)₄] ( 2 ), [Zn₂( L3 )₂(OAc)₄] ( 3 ), [Zn₂( L4 )₂(OAc)₄] ( 4 ), [Cu₂( L1 )₂(OAc)₄] ( 5 ), [Cu₂( L2 )₂(OAc)₄] ( 6 ), [Cu₂( L3 )₂(OAc)₄] ( 7 ) and [Cu₂( L4 )₂(OAc)₄] ( 8 ), were prepared via a mechanochemical method with excellent yields between 95 ‐ 98% by reacting the metal acetates and corresponding ligands. Structural studies showed that both complexes are dimeric with a paddlewheel core structure in which the separation between the two metal centres are 2.9898 (8) and 2.6653 (7) Å in complexes 3 and 7 , respectively. Complexes 1 – 8 were used in ring‐opening polymerization of ε‐caprolactone (ε‐CL) and rac‐lactide (rac‐LA). Zn(II) complexes were more active than Cu(II) complexes, with complex 1 bearing electron withdrawing chloro groups being the most active (k_app = 0.0803 h^‐1). Low molecular weight poly‐(ε‐CL) and poly‐(rac‐LA) ranging from 1720 to 6042 g mol^‐1, with broad molecular weight distribution (PDIs, 1.78 – 1.87) were obtained. Complex 2 gave reaction orders of 0.56 and 1.52 with respect to ε‐CL and rac‐LA, respectively.     

Complexes of diorganotin(IV) dihalides with N,N′-dimethyl-2, 2′-bisimidazole

Adducts of N, N′ -dimethyl-2, 2′-bisimidazole (DMBIm) with diethyl- and dibutyl-tin(IV) dihalides (Cl, Br) have been isolated and characterized. IR data for [SnR₂X₂(DMBIm)] compounds are in keeping with a six-coordinate tin atom with DMBIm acting as a bidentate ligand, whereas in [(SnR₂X₂)₂(DMBIm)] the tin is five-coordinate and DMBIm acts as a bridging ligand. Measurements of conductivity in acetonitrile show the adducts to behave as non-ionogens in this solvent. NMR data show them to undergo dissociation in CDCl₃.     

Structural Characterization of (Arylimido)vanadium(V) Compounds with 2,6‐Difluorophenoxide Ligand

The (arylimido)vanadium(V) compound, [(p‐MeOC₆H₄N)V(OiPr)₃] was demonstrated to undergo ligand exchange reaction with one or two equivalents of 2,6‐difluorophenol, affording the (arylimido)vanadium(V) compounds, [(p‐MeOC₆H₄N)V(OiPr)₂(O‐2,6‐F₂Ph)] and [(p‐MeOC₆H₄N)V(OiPr)(O‐2,6‐F₂Ph)₂]. Their X‐ray crystallographic analyses elucidated the μ‐isopropoxido‐bridged dimeric structures, wherein each vanadium atom has a trigonal‐bipyramidal arrangement with the imido and bridging isopropoxide ligands in the apical positions. The isopropoxide ligand was selectively employed as a bridging ligand between two central vanadium atoms. On the other hand, the reaction of the (arylimido)vanadium(V) compound, [(p‐MeOC₆H₄N)VCl₃] and three equivalents of lithium 2,6‐difluorophenoxide gave the (arylimido)vanadium(V) compound, [(p‐MeOC₆H₄N)V(O‐2,6‐F₂Ph)₃]. In the crystal packing, the thus‐obtained compound showed a distorted trigonal‐bipyramidal environment at the vanadium atoms with the μ‐phenoxido‐bridged dimeric structure, wherein the 2,6‐difluorophenoxide ligand was found to serve as a bridging ligand.     

Halide‐Free Diarylcalcium Complexes—Syntheses,Structures, and Stability

A general procedure was developed for the synthesis of diarylcalcium complexes by addition of KOtBu to arylcalcium iodides in THF. Intermediate arylcalcium tert‐butanolate dismutates immediately leading to insoluble tert‐butanolate precipitates of calcium. Depending on the steric demand and denticity of additional neutral aliphatic azabases, mononuclear or dinuclear complexes trans‐[Ca(α‐Naph)₂(thf)₄] ( 1 ), [Ca(β‐Naph)₂(thf)₄] ( 2 ), [Ca(Tol)₂(tmeda)]₂ ( 3 ), [Ca(Ph)₂(tmeda)]₂ ( 4 ), [Ca(Ph)₂(pmdta)(thf)] ( 5 ), [Ca(hmteta)(Ph)₂] ( 6 ), and [Ca([18]C‐6)(Ph)₂] ( 7 ) were isolated (Naph=naphthyl; meda=N,N,N′,N′‐tetramethylethylenediamine; pmdta= N,N,N′,N′′,N′′‐pentamethyldiethylenetriamine; hmteta=N,N,N′,N′′,N′′′,N′′′‐hexamethyltriethylenetetramine). The Ca?C bond lengths vary between 250.8 and 263.5 pm, the ipso‐carbon atoms show low‐field‐shifted resonances in the ¹³C NMR spectra.     

Vanadium(III) complexes containing phenoxy–imine–thiophene ligands: Synthesis,characterization and application to homo‐ and copolymerization of ethylene

A set of vanadium(III) complexes, namely {SNO}VCl₂(THF)₂ ( 2a , SNO = thiophene‐(N═CH)‐phenol; 2b , SNO = 5‐phenylthiophene‐(N═CH)‐phenol; 2c , SNO = 5‐phenylthiophene‐(N═CH)‐4‐tert ‐butylphenol; 2d , SNO = 5‐methylthiophene‐(N═CH)‐phenol; 2e , SNO = 5‐methylthiophene‐(N═CH)‐4‐tert ‐butylphenol; 2f , SNO = 5‐methylthiophene‐(N═CH)‐2‐methylphenol; 2g , SNO = 5‐methylthiophene‐(N═CH)‐4‐fluorophenol), were synthesized by reaction of VCl₃(THF)₃ with phenoxy–imine–thiophene proligands ( 1a – g ). All vanadium(III) complexes were characterized using elemental analysis and infrared and electron paramagnetic resonance spectroscopies. Upon activation with methylaluminoxane (MAO), vanadium precatalysts 2a – g proved active in the polymerization of ethylene (213.6–887.2 kg polyethylene (mol[V])⁻¹⋅h⁻¹), yielding high‐density polyethylenes with melting temperatures in the range 133–136 °C and crystallinities varying from 28 to 41%. The 2e/ MAO catalyst system was able to copolymerize ethylene with 1‐hexene affording poly(ethylene‐co ‐1‐hexene)s with melting temperatures varying from 126 to 102 °C and co‐monomer incorporation in the range 3.60–4.00%.     

Zur Reaktion der Alkin-Kupfer(I)-Komplexe [CuX(S-Alkin)] (X = Cl,Br, I; S-Alkin = 3,3,6,6-Tetramethyl-1-thia-4-cycloheptin) mit dem Chelat-Liganden N,N,N′,N′-Tetramethylethylendiamin (tmeda)

Organometallic Compounds of Copper. XVII. On the Reaction of the Alkyne-Copper(I) Complexes [CuX(S-Alkyne)] (X = Cl, Br, I; S-Alkyne = 3,3,6,6-Tetramethyl-1-thiacyclohept-4-yne) with the Chelate Ligand N,N,N′,N′-Tetramethylethylendiamine (tmeda) The alkyne copper(I) chloride complex [CuCl(S-Alkyne)]_n ( 2 a ) (S-Alkyne = 3,3,6,6–tetramethyl-1-thiacyclohept-4-yne) adds tetramethylethylene diamine (tmeda) to form the mononuclear compound [CuCl(S-Alkyne)(tmeda)] ( 4 ). The alkyne copper halide complexes [CuBr(S-Alkyne)]_n ( 2 b ) and [CuI(S-Alkyne)]_n ( 2 c ) react with tmeda to yield the complex salts [Cu(S-Alkyne)(tmeda)]⁺ [CuX₂(S-Alkyne)]^– (X = Br ( 5 a ), X = I ( 5 b )). X-ray diffraction studies on all new compounds 4 and 5 reveal distorted tetrahedral coordination of the copper atom in complex 4 and trigonal-planar coordinated copper atoms in the cations and anions of the ionic compounds 5 .     

Copper(II) Complexes with N‐(9‐anthracenyl)‐N′‐(3‐pyridyl)urea (L) and a Derivative of L: Synthesis,Structure, and Fluorescent Properties

Three copper(II) complexes, [Cu₂(OAc)₄L₂] · 2CH₃OH ( 1 ), [CuBr₂L′₂(CH₃OH)] · CH₃OH ( 2a ), and [CuBr₂L′₂(DMSO)] · 0.5CH₃OH ( 2b ) {L = N‐(9‐anthracenyl)‐N′‐(3‐pyridyl)urea and L′ = N‐[10‐(10‐methoxy‐anthronyl)]‐N′‐(3‐pyridyl)urea} have been synthesized by the reaction of L with the corresponding copper(II) salts. Complex 1 shows a dinuclear structure with a conventional “paddlewheel” motif, in which four acetate units bridge the two Cu^II ions. In complexes 2a and 2b , the anthracenyl ligand L has been converted to an anthronyl derivative L′, and the central metal ion exhibits a distorted square pyramidal arrangement, with two pyridyl nitrogen atoms and two bromide ions defining the basal plane and the apical position is occupied by a solvent molecule (CH₃OH in 2a and DMSO in 2b ).     

Synthesis and Characterization of a New Energetic Salt based on Dinitramide

The development of new ionic salt as green propellants is one of intense investigations to replace toxic N, N′‐dimethylhydrazine. A new energetic salt N, N′,N′′‐tri(propan‐2‐ylidene)methanetriamium dinitramide (NTAGDN) based on dinitramide was synthesized by reacting silver dinitramide with triaminoguanidinium chloride. The structure of this new energetic salt was confirmed by single‐crystal X‐ray diffraction, elemental analysis, Fourier transform infrared spectrometry, ultraviolet‐visible spectrophotometry, and nuclear magnetic resonance spectroscopy. NTAGDN crystallizes in the orthorhombic space group R$\bar{3}$ . Thermal decomposition was studied by differential scanning calorimetry, differential thermal analysis, and thermogravimetric tandem infrared spectrometry. Results indicated that NTAGDN exhibited excellent resistance to thermal decompositions of up to 470 K and incurred an 80.54 % mass loss between 450 and 523 K via exothermic decomposition. The kinetic parameters of NTAGDN thermal decomposition were also obtained from the differential thermal analysis data by Kissinger's method with E_a = 125.46 kJ · mol^–1. Moreover, based on the Kamlet‐Jacobs formula, the detonation velocity and detonation pressure of NTAGDN were calculated as 6.3 km · s^–1 and 15 GPa, respectively.     

Kinetic Determination of Nanogram Amounts of Mo(VI) in Solution

A new inhibitory reaction is proposed and a kinteic method developed for the determination of ultra‐micro amounts of Mo(VI) on the basis of its inhibitory activity in oxidation of trimethylenediamine ‐N,N,N′,N′‐tetraacetic acid (TDTA) by KMnO₄ in the presence of hydrochloric acid. Under optimal conditions the sensitivity of the method is 0.5 ng/cm³. The probable relative error is 2.9–3.5% for the concentration range 7.5–2.0 ng/cm³ of Mo(VI). The effect of certain foreign ions upon the reaction rate were determined for the assessment of the selectivity of the method. The selectivity of the method is relatively good. Kinetic equations were proposed for the investigated process. A method has been applied for determination of Mo(VI) in a certain kind of steel.     

N,N,N′,N′‐Tetraalkylaminoazoxybenzene Derivatives; Convenient Synthesis and Mechanistic Study

N,N,N′,N′‐tetraalkyaminoazoxybenzene derivatives were conveniently prepared by the coupling of N,N‐dialkylnitrosoaniline in the presence of acetone and KOH. The reaction mechanism was proposed and investigated, and the structure of compound 3b was also confirmed by single crystal X‐ray diffractometry.     

Pyrrole Denitrogenation and Fragmentation of Tetramethylethylenediamine Promoted by a NbII Cluster

A nitrogen center was abstracted from a pyrrolyl ring to form the dinuclear nitrido- and dienyl-bridged complex 1 during the reaction of [{(tmeda)Nb^IICl}₂(μ-Cl)₃Li(tmeda)] with the lithium salt of 2,5-dimethylpyrrole (tmeda=N,N,N′,N′-tetramethylethylenediamine). A second product from this reaction is the amido-carbene-hydride niobium complex 2 , which likewise forms under C−N bond cleavage.     

Two New Cadmium(II) Compounds based on Distinct Second Building Subunits: Solvothermal Syntheses,Crystal Structures,and Luminescent Properties

Two cadmium(II) coordination polymers, namely [Cd₃(bpt)₂(DMA)₂]_n ( 1 ) and [Cd₂(bpt)(btz)(DMF)]_n ( 2 ) (H₃bpt = biphenyl‐3,4′,5‐tricarboxylic acid, Hbtz = 1H‐benzotriazole, DMA = N,N‐dimethylacetamide; DMF = N,N‐dimethylformamide), were solvothermally synthesized and structurally characterized by single‐crystal X‐ray diffraction. Compound 1 displays a 3D framework based on trinuclear {Cd₃(COO)₄} subunits and can be simplified into a (4,8)‐connected topological network by viewing bpt^3– ligands and trinuclear {Cd₃(COO)₄} units as 4‐, 8‐connected nodes, respectively. Compound 2 also displays a 3D framework but based on 1D chain subunits controlled by carboxylate groups and btz^– ligands. In addition, the thermal stabilities and luminescent properties of compounds 1 and 2 were also investigated.     

Komplexbildung des tert-Butyliminovanadium(V)-trichlorids mit O-Donor-Liganden

Coordination Compounds of tert-Butyliminovanadium(V) Trichloride with O-Donor-Ligands The reaction of tert-butyliminovanadium(V)trichloride ( 1 ) with cyclic and acyclic ethers, ethylene carbonate and thietane has been studied. The 1:1-complexes have a different stability; reversible and irreversible cleavage of ether in the coordination sphere of the vanadium atom rearranging in ω-chloroalkanolato ligands are observed. The reaction of 1 with 2-chloroethanol, 3-chloropropanol and 5-chloropentanol yields the complexes ^tC₄H₉N = V(OR)Cl₂ (R = CH₂CH₂CH₂CH₂CH₂Cl) and [^tC₄H₉N = V(OR)Cl₂ · ROH]; in the presence of triethylamine the disubstituted compounds ^tC₄H₉N = V(OR)₂Cl are formed. The ⁵¹V NMR spectra are discussed. The crystal structure of [^tC₄H₉N = VCl₃ · DME] ( 12 ) and [^tC₄H₉N = V(OCH₂CH₂Cl)Cl₂ · HOCH₂CH₂Cl] ( 13 ) has been determined. The vanadium atoms in 13 have a distorted octahedral coordination and are linked by the oxygen atoms of the 2-chloroethanolato ligands forming a binuclear complex. In solution molecular weight measurement and ⁵¹V NMR data indicate the equilibrium between a mononuclear complex 13 and its isomer [^tC₄H₉N = V(OCH₂CH₂Cl)₂Cl · HCl].     

Sulfur‐Assisted Intermolecular Triphenylphosphine Dissociation of Thiocarbamoyl Ligand in Platinum(II). X‐ray Structure of Complex [Pt(PPh3)2(η1‐SCNMe2)(Cl)]

Treatment of Pt(PPh₃)₄ with N,N‐dimethylthiocarbamoyl chloride, Me₂NC(=S)Cl, in dichloromethane at ?20 °C processes the oxidative addition reaction to produce platinum complex [Pt(PPh₃)₂(η¹‐SCNMe₂)(Cl)], 2 with releasing two triphenylphosphine molecules. The ³¹P{¹H} NMR spectra of complex 2 shows the dissociation of the triphenylphosphine ligand to form diplatinum complex [Pt(PPh₃)Cl]₂(μ,η²‐SCNMe₂)₂, 3 in which the two SCNMe₂ ligands coordinated through carbon to one metal center and bridging the other metal through sulfur. Complex 2 is characterized by X‐ray diffraction analysis.     

Komplexe mit N,N,N′,N′-Tetrakis(2-hydroxybenzyl)ethylendiamin (H4tben). Kristallstruktur von Ti(tben)

Complexes with N,N,N′,N′-Tetrakis(2-hydroxybenzyl)ethylenediamine (H₄tben). Crystal Structure of Ti(tben) The complexes of N,N,N′,N′-tetrakis(2-hydroxybenzyl)-ethylenediamine with titanium(IV), vanadium(IV), manganese(IV), and tin(IV) were synthesized and characterized by mass spectrometry. The Mössbauer date were evaluated for the tin compound. The molecular structure of the titanium(IV) complex was determined by X-ray structural analysis, crystallographic data see “Inhaltsübersicht”.     

Synthesis of N,N′,X‐tridentate 2‐iminomethylpyrrole‐coordinated palladium(II) complexes via N─H bond activation of pyrrole moiety

The reaction of [Pd(CH₃CN)₂Cl₂] with N ‐functional group‐substituted 2‐iminomethylpyrrole‐based ligands, namely N ¹‐((1H‐pyrrol‐2‐yl)methylene)‐N ³,N ³‐dimethylpropane‐1,3‐diamine (L_A), N ¹‐((1H‐pyrrol‐2‐yl)methylene)‐N ³‐methyl‐N ³‐phenylpropane‐1,3‐diamine (L_B), N ‐((1H‐pyrrol‐2‐yl)methylene)‐3‐(methylthio)propan‐1‐amine (L_C) and N ‐((1H‐pyrrol‐2‐yl)methylene)‐3‐methoxypropan‐1‐amine (L_D), resulted in [L_n PdCl] (L_n  = L_A–L_D) complexes in high yield via N─H bond activation of pyrrole moiety without use of base. [L_n PdCl] existed as monomeric four‐coordinated complexes with slightly distorted square planar geometries around the palladium metal center. The ligands show N ,N ′,X ‐tridentate binding mode to the palladium metal center to give two fused ring metallacycles. [L_BPdCl] gave the highest activity (3.29 × 10⁵ g PMMA (mol Pd)⁻¹ h⁻¹) for a methyl methacrylate (MMA) polymerization in the presence of modified methylaluminoxane at 60 °C compared to the other Pd(II) analogues, and resulted in PMMA with higher molecular weight (M _w = 7.16 × 10⁵ g mol⁻¹) and narrower polydispersity index. Syndiotactic‐enriched PMMA resulted in all cases.     

Homo‐ and Copolymerization of Butadiene Catalyzed by an Bis(imino)pyridyl Vanadium Complex

Summary: The bis(imino)pyridyl vanadium(III ) complex [VCl₃{2,6‐bis[(2,6‐iPr₂C₆H₃)NC(Me)]₂(C₅H₃N)}] activated with different aluminium cocatalysts (AlEt₂Cl, Al₂Et₃Cl₃, MAO) promotes chemoselective 1,4‐polymerization of butadiene with activity values higher than classical vanadium‐chloride‐based catalysts. The polymer structure depends on the nature of the cocatalyst employed. The MAO‐activated complex was also found to be active in ethylene‐butadiene copolymerization, producing copolymers with up to 45 mol‐% of trans‐1,4‐butadiene. Crystalline polyethylene and trans‐1,4‐poly(butadiene) segments were detected in these copolymers by DSC and ¹³C NMR spectroscopy.

     

C74(BN)2的UV和IR 光谱研究

Equilibrium geometries of 16 possible isomers for C74（BN）2 were studied by INDO series of methods, to indicate that the most stable three geometries are those where boron and nitrogen atoms substitute carbon atoms located at the same hexagon near the longest axis of C78 （C2v） to form B-N-B-N unit. Electronic spectra of C74（BN）2 were investigated with INDO/CIS method. The reason for the red shift of UV absorptions for C74（BN）2 compared with those of C78 （C2v） was discussed. IR spectra for 9,8,28,29-C74（BN）2 and 28,29,30,31-C74（BN）2 were calculated on the basis of AM1 geometries.     

Synthese und Struktur von [(Me2PhP)3Cl2ReN]2NbCl4 und [Re3N3Cl5(PMe2Ph)6][NbCl6]

Synthesis and Structure of [(Me₂PhP)₃Cl₂ReN]₂NbCl₄ and [Re₃N₃Cl₅(PMe₂Ph)₆][NbCl₆] The reaction of ReNCl₂(PMe₂Ph)₃ with NbCl₅ in toluene yields the trinuclear complexes [(Me₂PhP)₃Cl₂ReN]₂‐ NbCl₄ (1) and [Re₃N₃Cl₅(PMe₂Ph)₆][NbCl₆] ( 2 ). 1 forms triclinic crystals with the composition 1 · 2 C₇H₈ (P 1, a = 1074.5(1), b = 1289.1(2), c = 1299.3(2) pm, α = 85.25(2)°, β = 81.04(2)°, γ = 86.02(1)°, Z = 1). In the centrosymmetric compound 1 two complexes ReNCl₂(PMe₂Ph)₃ coordinate with their nitrido ligands a square planar, central unit NbCl₄ to form an almost linear arrangement Re≡N–Nb–N≡Re. The length of the Re–N triple bonds is 172,2 pm, and the Nb–N distances of 216.0 pm correspond to coordinative single bonds. 2 forms orthorhombic crystals with the space group P2₁2₁2₁ and a = 1286.0(1), b = 2109.2(4), c = 2436.2(3) pm, Z = 4. The three Re atoms are located at the corners of a triangle. They are connected by two asymmetric nitrido bridges and two asymmetric chloro bridges. The weakly bent nitrido bridges (Re–N–Re = 152° and 157°) are characterized by Re–N distances of 169 und 207 pm as well as 171 and 207 pm. Re1, in addition, binds a terminal nitrido ligand with Re1–N1 = 166 pm.     

The Synthesis of (η3‐C3H5)Pd{Si[N(tBu)CH]2}Cl and the Catalytic Property for Heck Reaction

Treatment of N‐heterocyclic silylene Si[N(^tBu)CH]₂ ( 1 ) and [(η³‐C₃H₅)PdCl]₂ in toluene led to the formation of the mononuclear complex (η³‐C₃H₅)Pd{Si[N(^tBu)CH]₂}Cl ( 3 ), the silicon analogue to N‐heterocyclic carbene complex (η³‐C₃H₅)Pd{C[N(^tBu)CH]₂}Cl ( 2 ). Complex 3 was characterized with ¹H NMR and ¹³C NMR. Investigation shows that (η³‐C₃H₅)Pd{Si[N(^tBu)CH]₂}Cl is an active catalyst for Heck coupling reaction of styrene with aryl bromides.