Aqueous solution chemistry of [Mo3CuSe4]n+ (n = 4, 5) and [W3CuQ4]5+ (Q = S, Se) clusters

The triangular cluster [Mo3Se4(H2O)9]4+ reacts with Cu turnings to give a new heterometallic cuboidal cluster [Mo3CuSe4(H2O)10]4+(purple; UV/Vis lambda(epsilon): 352(3907), 509(2613)). The reaction of [Mo3Se4(H2O)9]4+ with CuCl afforded the 5+ cube [Mo3CuSe4(H2O)10]5+(red; UV/Vis lambda(epsilon): 356(5406), 500(3477)). In contrast, [W3Se4(H2O)9]4+ both with Cu and CuCl gives the 5+ cube, [W3CuSe4(H2O)10]5+(yellow-green; UV/Vis lambda(epsilon): 312(5327), 419(3256) and 628(680)). Cyclic voltammetry of [M3CuQ4(H2O)10]5+ in 2 M HCl (M = Mo, W; Q = S, Se) shows a reversible one-electron reduction wave for the Mo clusters, but no reduction occurs for the W clusters prior to H+ reduction. In HCl solutions, Cl is coordinated to the Cu site of the clusters, alongside some less extensive coordination to Mo and W, and for [W3(CuCl)S4(H2O)6Cl3]+, isolated as the supramolecular adduct with cucurbit[6]uril, [W3(CuCl)S4(H2O)6Cl3]2Cl2 x C36H36N24O12 x 12H2O, the crystal structure was determined (Cu-W 2.856(4) angstroms, W-W 2.7432(15) angstroms, Cu-Cl 2.167(13) angstroms).     

Synthesis and structure of nickel-containing cuboidal clusters derived from [W3Se4(H2O)9]4+. Site-differentiated substitution at the nickel site in the series [W3NiQ4(H2O)10]4+ (Q = S, Se)

New Ni-containing heterometallic cuboidal cluster aqua complex [W3(NiCl)Se4(H2O)9]3+, the missing link in the family of the M3NiQ4 clusters (M = Mo, W; Q = S, Se), has been prepared by the reaction of [W3Se4(H2O)9]4+ with Ni in 2 M HCl. Single crystals of edge-linked double-cuboidal cluster [{W3NiSe4(H2O)9}2](pts)8.18H2O (pts = p-toluenesulfonate) were grown from the solution of the aqua complex in 3 M Hpts, and their structures were determined. The Ni site in the clusters [W3(NiCl)Q4(H2O)9]3+ selectively coordinates typical pi-acceptor ligands such as CO, olefins, acetylenes, phosphines, arsines, or SnCl3-. This allows stabilization by coordination of such elusive species as HP(OH)2 and As(OH)3. The stability constants for coordination of HP(OH)2, As(OH)3, and SnCl3- were determined. The Se for S substitution increases the stability by 1-2 orders of magnitude. Supramolecular adducts with cucurbit[6]uril (Cuc), [W3(Ni(HP(OH)2))Q4(H2O)9]Cl4.Cuc.11H2O and [W3(NiAs(OH)3)S4(H2O)8Cl]Cl3.Cuc.13H2O, were isolated and structurally characterized.     

Heterometallic cuboidal clusters M(3)M'Q(4) (M = Mo, W; M'= Sn, Pb, As, Sb; Q = S, Se): from coordination compounds to supramolecular adducts

Reactions of the incomplete cuboidal clusters [M3Q4(acac)3(py)3]+ (M = Mo, W; Q = S, Se) with group 14 and 15 metal complexes with the s2p0 electronic configuration (AsPh3, SbPh3, SbCl3, SbI3, PbI3-, SnCl3-) led to heterometal incorporation with the formation of cuboidal clusters of the type [M3(EX3)Q4(acac)3(py)3]n+ (n = 0 for Sn, Pb; n = 1 for As, Sb), whose structures were determined by X-ray diffraction. The cuboidal clusters can be described as complexes of the cluster tridentate ligand [M3Q4(acac)3(py)3]+ (mu2-chalcogen atoms as donors) with the EX3, where the E atom attains a distorted octahedral coordination. Analysis based on the bond distances E-Q gives the following sequence of affinity: As < Sb; Pb < Sn approximately Sb; SbPh3 < SbI3 approximately SbCl3; W3S4 < W3Se4. Interaction energies at the gas phase between [W3Q4(acac)3(py)3]+ (Q = S, Se) and SbX3 (X = I, Ph) were computed at the DFT level (BP86/TZP). The magnitude of the interaction depends strongly on the substituents at Sb, and the replacement of iodine by the phenyl group decreases the interaction energy from -9.21 to -2.70 kcal/mol and from -12.73 to -3.85 kcal/mol for the W3SbS4 and W3SbSe4 cores, respectively.     

Cluster oxalate complexes [M3(mu3-Q)(mu2-Q2)3(C2O4)3]2- and [Mo3(mu3-Q)(mu2-Q)3(C2O4)3(H2O)3]2- (M = Mo, W; Q = S, Se): mechanochemical synthesis and crystal structure

Mechanochemical reaction of cluster coordination polymers 1infinity[M3Q7Br4] (M = Mo, W; Q = S, Se) with solid K2C2O4 leads to cluster core excision with the formation of anionic complexes [M3Q7(C2O4)3]2-. Extraction of the reaction mixture with water followed by crystallization gives crystalline K2[M3Q7(C2O4)3].0.5KBr.nH2O (M = Mo, Q = S, n = 3 (1); M = Mo, Q = Se, n = 4 (2); M = W, Q = S, n = 5 (3)). Cs2[Mo3S7(C2O4)3].0.5CsCl.3.5H2O (4) and (Et4N)1.5H0.5K{[Mo3S7(C2O4)3]Br}.2H2O (5) were also prepared. Close Q...Br contacts result in the formation of ionic triples {[M3Q7(C2O4)3](2)Br}5- in 1-4 and the 1:1 adduct {[Mo3S7(C2O4)3]Br}3- in 5. Treatment of 1 or 2 with PPh(3) leads to chalcogen abstraction with the formation of [Mo3(mu3-Q)(mu2-Q)3(C2O4)3(H2O)3]2-, isolated as (Ph4P)2[Mo3(mu3-S)(mu2-S)3(C2O4)3(H2O)3].11H2O (6) and (Ph4P2[Mo3(mu3-Se)(mu2-Se)3(C2O4)3(H2O)3].8.5H2O.0.5C2H5OH (7). All compounds were characterized by X-ray structure analysis. IR, Raman, electronic, and 77Se NMR spectra are also reported. Thermal decomposition of 1-3 was studied by thermogravimetry.     

A family of oxo-chalcogenide molybdenum and tungsten complexes, (n-Bu4N)2[M2O2(mu-Q)2(1,3-dithiole-2-thione-4,5-dithiolate)2] (M = Mo, W; Q = S, Se): new synthetic entries, structure, and gas-phase behavior

A new series of complexes with the general formula (n-Bu4N)2[M2O2(micro-Q)2(dmit)2] (where M = Mo, W; Q = S, Se; dmit = 1,3-dithiole-2-thione-4,5-dithiolate) have been prepared. Fragmentation of the trinuclear cluster (n-Bu4N)2[Mo3(micro3-S)(micro-S2)3(dmit)3] in the presence of triphenylphosphine (PPh3) gives the dinuclear compound (n-Bu4N)2[Mo2O2(micro-S)2(dmit)2] [(n-Bu4N)2[2]], which is formed via oxidation in air from the intermediate (n-Bu4N)2[Mo3(micro3-S)(micro-S)3(dmit)3] [(n-Bu4N)2[1]] complex. Ligand substitution of the molybdenum sulfur bridged [Mo2O2(micro-S)2(dimethylformamide)6]2+ dimer with the sodium salt of the dmit dithiolate also affords the dianionic compound (n-Bu4N)2[2]. The whole series, (n-Bu4N)2[Mo2O2(micro-Se)2(dmit)2] [(n-Bu4N)2[3]], (n-Bu4N)2[W2O2(micro-S)2(dmit)2] [(n-Bu4N)2[4]], (n-Bu4N)2[W2O2(micro-Se)2(dmit)2] [(n-Bu4N)2[5]], and (n-Bu4N)2[Mo2O2(micro-S)2(dmid)2] [(n-Bu4N)2[6]; dmid = 1,3-dithiole-2-one-4,5-dithiolate], has been synthesized by the excision of the polymeric (Mo3Q7Br4)x phases with PPh3 or 1,2-bis(diphenylphosphanyl)ethane in acetonitrile followed by the dithiolene incorporation and further degradation in air. Direct evidence of the presence of the intermediates with the formula [M3Q4(dmit)3]2- (M = Mo, W; Q = S, Se) has been obtained by electrospray ionization mass spectrometry. The crystal structures of (n-Bu4N)2[1], (PPh4)2[Mo2O2(micro-S)2(dmit)2] [(PPh4)2[2]; PPh4 = tetraphenylphosphonium], (n-Bu4N)2[2], (n-Bu4N)2[4], (PPh4)2[W2O2(micro-Se)2(dmit)2] [(PPh4)2[5]], and (n-Bu4N)2[6] have been determined. A detailed study of the gas-phase behavior for compounds (n-Bu4N)2[2-6] shows an identical fragmentation pathway for the whole family that consists of a partial breaking of the two dithiolene ligands followed by the dissociation of the dinuclear cluster.     

Preparation and properties of the aqua ions [W(4)S(4)(H(2)O)(12)](n+) (n = 5, 6) and crystal structure of (Me(2)NH(2))(6)[W(4)S(4)(NCS)(12)].0.5H(2)O

The [3 + 1] reaction of [W(3)S(4)(H(2)O)(9)](4+) with [W(CO)(6)] in 2 M HCl under hydrothermal conditions (130 degrees C) gives the [W(4)S(4)(H(2)O)(12)](6+) cuboidal cluster, reduction potential 35 mV vs NHE (6+/5+ couple). The reduced form is obtained by controlled potential electrolysis. X-ray crystal structure was determined for (Me(2)NH(2))(6)[W(4)S(4)(NCS)(12)].0.5H(2)O. The W-W and W-S bond lengths are 2.840 and 2.379 A, respectively.     

Stabilization of the previously unknown tautomer HP(OH)2 of hypophosphorous acid as ligand; preparation of [W3(Ni(HP(OH)2))Q4(H2O)9]4+ (Q = S,Se) complexes

Bis(hydroxy)phosphine, the isomer of hypophosphorous acid which remained elusive for a long time, coordinates to the Ni site of heterometallic clusters with a W3NiQ4 core (Q = S, Se) to give [W3(Ni(HP(OH)2))Q4(H2O)9]4+ (Q = S, Se).     

Interplay of cubic building blocks in (et6-arene)ruthenium-containing tungsten and molybdenum oxides

A series of molybdenum and tungsten organometallic oxides containing [Ru(arene)]2+ units (arene =p-cymene, C6Me6) was obtained by condensation of [[Ru(arene)Cl2]2] with oxomolybdates and oxotungstates in aqueous or nonaqueous solvents. The crystal structures of [[Ru(eta6-C6Me6]]4W4O16], [[Ru(eta6-p-MeC6H4iPr]]4W2O10], [[[Ru-(eta6-p-MeC6H4iPr)]2(mu-OH)3]2][[Ru(eta6-p-MeC6H4iPr)]2W8O28(OH)2[Ru(eta6-p-MeC6H4iPr)(H2O)]2], and [[Ru(eta6-C6Me6)]2M5O18[Ru(eta6-C6Me6)(H2O)]] (M = Mo, W) have been determined. While the windmill-type clusters [[Ru(eta6-arene)]4(MO3)4(mu3-O)4] (M = Mo, W; arene =p-MeC6H4iPr, C6Me6), the face-sharing double cubane-type cluster [[Ru(eta6-p-MeC6H4iPr)]4(WO2)2(mu3-O)4(mu4-O)2], and the dimeric cluster [[Ru(eta6-p-MeC6H4iPr)(WO3)3(mu3-O)3(mu3-OH)Ru(eta6-pMeC6H4iPr)(H2O)]2(mu-WO2)2]2- are based on cubane-like units, [(Ru(eta6-C6Me6)]2M5O18[Ru(eta6-C6Me6)(H2O)]] (M = Mo, W) are more properly described as lacunary Lindqvist-type polyoxoanions supporting three ruthenium centers. Precubane clusters [[Ru(eta6-arene)](MO3)2(mu-O)3(mu3-O)]6- are possible intermediates in the formation of these clusters. The cluster structures are retained in solution, except for [[Ru(eta6-p-MeC6H4iPr)]4Mo4O16], which isomerizes to the triple-cubane form.     

Synthesis, structure and reactivity of cuboidal-type cluster aqua complexes with W3PdS4 4+ core

The reaction of PdCl(2) with [W3S4(H2O)9]4+ in the presence of hypophosphorous acid in 2 M HCl gives cuboidal cluster [W3(PdCl)S4(H2O)9]3+ (1) which undergoes condensation and crystallises from Hpts solutions as edge-linked double cubane cluster [{W3PdS4(H2O)9}2](pts)(8).19H2O (pts = p-toluenesulfonate) (1'). The substitution of Cl- in (1) by different ligands was explored. The Pd atom in the cluster shows an exceptionally high reactivity in the isomerisation of the hydrophosphoryl H2P(O)(OH), HP(O)(OH)2, HPPh(O)(OH) and HPPh2(O) molecules into the corresponding hydroxo tautomers HP(OH)2, P(OH)3, PhP(OH)2 and Ph2P(OH) stabilised by coordination at Pd. The reactions were followed by UV-Vis spectrophotometry and 31P NMR. Formation constants of the 1 : 1 coordination of [M3(PdCl)S4(H2O)9]3+ (M = Mo, W) with HP(OH)2 and As(OH)3 were obtained. The structures of cucurbit[6]uril (C36H36N24O12, CUC[6]) adducts [W3(PdP(OH)3)S4(H2O)8Cl]-(C36H36N24O12)Cl3.12.5H2O (2), and [W3Pd(PhP(OH)2)S4(H2O)7Cl2]2(C36H36N24O12)Cl4.9H2O (3) were determined by single-crystal X-ray diffraction.     

Cations M2(O2CtBu)4+, where M = Mo and W, and MoW(O2CtBu)4+. Theoretical, spectroscopic, and structural investigations

With the aid of density function theory, the molecular and electronic structures of the molecules Mo2(O2CMe)4, MoW(O2CMe)4, and W2(O2CMe)4 and their single-electron oxidized radical cations have been determined; this includes calculated observables such as v(MM) and the delta --> delta* electronic transition energies. The calculated properties are compared with those for the corresponding pivalates, M2(O2CtBu)4 (M = Mo or W) and MoW(O2CtBu)4 and their radical cations prepared in situ by oxidation with Cp2FePF6. The EPR spectra of the radical cations are also reported. The EPR spectrum of the MoW(O2CtBu)4+ cation reveals that the unpaired electron is in a polarized MM delta orbital having 70% Mo and 30% W character. The MM stretching frequencies show good correlation with the MM bond lengths obtained from single-crystal X-ray diffraction studies of MoW(O2CtBu)4, W2(O2CtBu)4, and W2(O2CtBu)4+PF6- compounds, along with previously reported structures. These data provide benchmark parameters for valence trapped dicarboxylate bridged radical cations of the type [(tBuCO2)3M2]2(micro-O2C-X-CO2)+ (X = conjugated spacer).     

Redox chemistry of the acetato-bridged clusters [M3(mu3-O)n(mu-O2CCH3)6(H2O)3]2+ (M = Mo, W, n = 1, 2): reversible redox between mono-micro3-oxo d8 M(III)2M(IV) and d9 M(III)3 forms

A cyclic voltammogram of aqueous 0.1 mol dm(-3) triflic acid solutions of the d6 bioxo-capped M-M bonded cluster [Mo3(mu3-O)2(O2CCH3)6(H2O)3]2+ at a glassy carbon electrode at 25 degrees C gives rise to an irreversible 3e- cathodic wave to a d9 Mo(III)3 species at -0.8 V vs. SCE which on the return scan gives rise to two anodic waves at +0.05 V vs. SCE (E(1/2), 1e- reversible to d8 Mo(III)2Mo(IV)) and +0.48 V vs. SCE (2e- irreversible back to d6 Mo(IV)3). The number of electrons passed at each redox wave has been confirmed by redox titration and controlled potential electrolysis which resulted in 90% recovery of [Mo3(mu3-O)2(O2CCH3)6(H2O)3]2+ following electrochemical re-oxidation at +0.8 V. A corresponding CV study of the d8 monoxo-capped W(III)2W(IV) cluster [W3(mu3-O)(O2CCH3)6(H2O)3]2+ gives rise to a reversible 1e- cathodic process at -0.92 V vs. SCE to give the d9 W(III)3 species [W3(mu3-O)(O2CCH3)6(H2O)3]+; the first authentic example of a W(III) complex with coordinated water ligands. However the cluster is too unstable (O2/water sensitive) to allow isolation. Comparisons with the cv study on [Mo3(mu3-O)2(O2CCH3)6(H2O)3]2+ suggest irreversible reduction of this complex to monoxo-capped [Mo(III)3(mu3-O)(O2CCH3)6(H2O)3]+ followed by reversible oxidation to its d8 counterpart [Mo3(mu3-O)(O2CCH3)6(H2O)3]2+ (Mo(III)2Mo(IV)) and finally irreversible oxidation back to the starting bioxo-capped cluster. Exposing the d9 Mo(III)3 cluster to air (O2) however gives a different final product with evidence of break up of the acetate bridged framework. Corresponding redox processes on d6 [W3(mu3-O)2(O2CCH3)6(H2O)3]2+ are too cathodic to allow similar generation of the monoxo-capped W(III)3 and W(III)2W(IV) clusters at the electrode surface.     

Preparation and substitution chemistry of [Bu4N]2[W6Cl8(p-OSO2C6H4CH3)6]. A useful precursor for pseudohalide, acetate, and organometallic complexes containing the [W6Cl8](4+) core

The tosylate (p-toluenesulfonate) cluster [Bu4N]2[W6Cl8(p-OSO2C6H4CH3)6] (1) has been prepared and characterized by IR and NMR spectroscopy, elemental analysis, and an X-ray crystal structure. This cluster complex is shown to be a useful starting material for the preparation of pseudohalide clusters, [Bu4N]2[W6Cl8(NCQ)6] (Q = O (2), S (3), and Se (4)), in high yields. Cluster 1 also serves as a precursor to the new cluster compounds: [Bu4N]2[W6Cl8(O2CCH3)6] (5), [Bu4N]2[W6Cl8((mu-NC)Mn(CO)2(C5H5))6] (6), [W6Cl8((mu-NC)Ru(PPh3)2(C5H5))6][ p-OSO2C6H4CH3]4 (7), and [W6Cl8((mu-NC)Os(PPh3)2(C5H5))6][ p-OSO2C6H4CH3]4 (8). X-ray crystal structures are reported for 1, 4, and 5.     

Preparation and crystal structures of formato complexes of the [MIV3O4]4+ and [MIV3S4]4+ (M = Mo,W) clusters. Convenient precursors to the corresponding aqua complexes

In the aqueous chemistry of molybdenum(IV) and tungsten(IV), trinuclear, incomplete cubane-like, oxo and sulfido clusters of the type [M3E4]4+ (M = Mo, W; E = O, S) play a central role. We here describe how formato complexes of all these cluster cores can be prepared in high yields by crystallization from methanol-water or ethanol-water mixtures. Since potassium and ammonium formate are very soluble in these alcohol-water mixtures, high formate concentrations could be accomplished in the solutions from which the corresponding salts of cluster formato complexes crystallized. The [Mo3O4]4+ compounds could be synthesized without requiring the use of noncomplexing acids in the process. Some [M3E4]4+ compounds were characterized by single-crystal structure determinations. [NH4]3.20[K]0.80[H3O][Mo3O4(HCO2)8][HCO2].H2O was triclinic, space group P1 (No. 2) with a = 11.011(2) A, b = 13.310(2) A, c = 9.993(1) A, alpha = 106.817(7) degrees, beta = 91.651(9) degrees, gamma = 88.340(9) degrees, and two formula units per cell. [K]6[W3S4(HCO2)9][HCO2].2.27H2O.0.73CH3OH was monoclinic, space group C2/m (No. 12) with a = 19.605(6) A, b = 14.458(7) A, c = 13.627(5) A, beta = 118.94(2) degrees, and four formula units per cell. Generally, the nine coordination sites of [M3E4]4+ were occupied either by a mixture of monodentate and mu 2-bridging formato ligands or by monodentate formato ligands only. By dissolution in noncomplexing strong acid, all the formato complexes immediately hydrolyzed to form [M3E4(H2O)9]4+ aqua complexes. This allows, for example, high concentrations of [Mo3S4(H2O)9]4+ in CF3SO3H to be obtained and these solutions to be used for the synthesis of bimetallic clusters containing the cubane-like motif Mo3M'S4.     

Synthesis, crystal structure, aqueous speciation, and kinetics of substitution reactions in a water-soluble Mo3S4 cluster bearing hydroxymethyl diphosphine ligands

The [Mo3S4Cl3(dhmpe)3]Cl ([1]Cl) cluster has been prepared from [Mo3S7Cl6]2- and the water-soluble 1,2-bis(bis(hydroxymethyl)-phosphino)ethane (dhmpe, L) ligand. The crystal structure has been determined by X-ray diffraction methods and shows the incomplete cuboidal structure typical of the M3Q4 clusters (M=Mo, W; Q=S, Se), with a capping sulfide ligand to the three metal centers and the other three sulfides acting as bridges between two Mo atoms. The octahedral coordination around each metal center is completed with a chlorine and two phosphorus atoms of one L ligand. The chemistry of aqueous solutions of [1]Cl is dominated by the formation of the [Mo3S4L(L-H)2(H2O)]2+ complex ([2]2+), where the three chlorides have been replaced by one water molecule and two alkoxo groups of two different dhmpe ligands, thus leading to a solution structure where the three metal centers are not equivalent. A detailed study based on stopped-flow, 31P{1H} NMR, and electrospray ionization mass spectrometry techniques has been carried out to understand the behavior of [2]2+ in aqueous solution. In this way, it has been established that the addition of an excess of X- (Cl-, SCN-) leads to [Mo3S4X3(dhmpe)3]+ complexes in three resolved kinetic steps that correspond to the sequential coordination of X- at the three metal centers. However, whereas the first two steps involve the opening of the chelate rings formed with the alkoxo groups of the dhmpe ligands, the third one corresponds to the substitution of the coordinated water molecule. These results demonstrate that the asymmetry introduced by the closure of chelate rings at only two of the three Mo centers makes the kinetics of the reaction deviate significantly from the statistical behavior typically associated with M3Q4 clusters. The results obtained for the reaction of [2]2+ with acid and base are also described, and they complete the picture of the aqueous speciation of this cluster.     

Synthesis and reactivity of W3Te74+ clusters and chalcogen exchange in the M3Q7 (M = Mo, W; Q = S, Se, Te) cluster family

Heating WTe(2), Te, and Br(2) at 390 degrees C followed by extraction with KCN gives [W(3)Te(7)(CN)(6)](2-). Crystal structures of double salts Cs(3.5)K{[W(3)Te(7)(CN)(6)]Br}Br(1.5).4.5H(2)O (1), Cs(2)K(4){[W(3)Te(7)(CN)(6)](2)Cl}Cl.5H(2)O (2), and (Ph(4)P)(3){[W(3)Te(7)(CN)(6)]Br}.H(2)O (3) reveal short Te(2)...X (X = Cl, Br) contacts. Reaction of polymeric Mo(3)Se(7)Br(4) with KNCSe melt gives [Mo(3)Se(7)(CN)(6)](2-). Reactions of polymeric Mo(3)S(7)Br(4) and Mo(3)Te(7)I(4) with KNCSe melt (200-220 degrees C) all give as final product [Mo(3)Se(7)(CN)(6)](2)(-) via intermediate formation of [Mo(3)S(4)Se(3)(CN)(6)](2-)/[Mo(3)SSe(6)(CN)(6)](2-) and of [Mo(3)Te(4)Se(3)(CN)(6)](2-), respectively, as was shown by ESI-MS. (NH(4))(1.5)K(3){[Mo(3)Se(7)(CN)(6)]I}I(1.5).4.5H(2)O (4) was isolated and structurally characterized. Reactions of W(3)Q(7)Br(4) (Q = S, Se) with KNCSe lead to [W(3)Q(4)(CN)(9)](5-). Heating W(3)Te(7)Br(4) in KCNSe melt gives a complicated mixture of W(3)Q(7) and W(3)Q(4) derivatives, as was shown by ESI-MS, from which E(3)[W(3)(mu(3)-Te)(mu-TeSe)(3)(CN)(6)]Br.6H(2)O (5) and K(5)[W(3)(mu(3)-Te)(mu-Se)(3)(CN)(9)] (6) were isolated. X-ray analysis of 5 reveals the presence of a new TeSe(2-) ligand. The complexes were characterized by IR, Raman, electronic, and (77)Se and (125)Te NMR spectra and by ESI mass spectrometry.     

Highly reduced, polyoxo(alkoxo)vanadium(III/IV) clusters

A family of high nuclearity oxo(alkoxo)vanadium clusters in unprecedentedly low oxidation states is reported, synthesised from simple vanadium diketonate precursors in alcohols under solvothermal conditions. Crystal structures of [V18(O)12(OH)2(H2O)4(EtO)22(O2CPh)6(acac)2] (1), [V16Na2(O)18(EtO)16(EtOH)2(O2CPh)6(HO2CPh)2]infinity (2), [V13(O)13(EtO)15(EtOH)(RCO2)3] in which R=adamantyl (3) or Ph3C (4), and [V11(O)12(EtO)13(EtOH)(Ph3CCO2)2(MePO3)] (5) are reported, revealing these to be {VIII 16VIV 2} (1), {VIII 9VIV 3VV} (3 and 4) and {VIII 3VIV 8} (5) clusters, while 2 consists of isolated {VIII 8VIV 8} clusters bridged into polymeric chains by {Na2(OEt)2} fragments. Solvothermal conditions are essential to the formation of these species, and the level of oxidation of the isolated clusters is in part controlled by the crystallisation time, with the lowest mean-oxidation-state species being isolated by direct crystallisation on controlled cooling of the reaction solutions.     

Rare-earth metal(III) oxide selenides M4O4Se[Se2] (M=La, Ce, Pr, Nd, Sm) with discrete diselenide units: crystal structures, magnetic frustration, and other properties

The rare-earth metal(III) oxide selenides of the formula La4O4Se[Se2], Ce4O4Se[Se2], Pr4O4Se[Se2], Nd4O4Se[Se2], and Sm4O4Se[Se2] were synthesized from a mixture of the elements with selenium dioxide as the oxygen source at 750 degrees C. Single crystal X-ray diffraction was used to determine their crystal structures. The isostructural compounds M4O4Se[Se2] (M=La, Ce, Pr, Nd, Sm) crystallize in the orthorhombic space group Amm2 with cell dimensions a=857.94(7), b=409.44(4), c=1316.49(8) pm for M=La; a=851.37(6), b=404.82(3), c=1296.83(9) pm for M=Ce; a=849.92(6), b=402.78(3), c=1292.57(9) pm for M=Pr; a=845.68(4), b=398.83(2), c=1282.45(7) pm for M=Nd; and a=840.08(5), b=394.04(3), c=1263.83(6) pm for M=Sm (Z=2). In their crystal structures, Se2- anions as well as [Se-Se]2- dumbbells interconnect {[M4O4]4+} infinity 2 layers. These layers are composed of three crystallographically different, distorted [OM4]10+ tetrahedra, which are linked via four common edges. The compounds exhibit strong Raman active modes at around 215 cm(-1), which can be assigned to the Se-Se stretching vibration. Optical band gaps for La4O4Se[Se2], Ce4O4Se[Se2], Pr4O4Se[Se2], Nd4O4Se[Se2], and Sm4O4Se[Se2] were derived from diffuse reflectance spectra. The energy values at which absorption takes place are typical for semiconducting materials. For the compounds M4O4Se[Se2] (M=La, Pr, Nd, Sm) the fundamental band gaps, caused by transitions from the valence band to the conduction band (VB-CB), lie around 1.9 eV, while for M=Ce an absorption edge occurs at around 1.7 eV, which can be assigned to f-d transitions of Ce3+. Magnetic susceptibility measurements of Ce4O4Se[Se2] and Nd4O4Se[Se2] show Curie-Weiss behavior above 150 K with derived experimental magnetic moments of 2.5 micro B/Ce and 3.7 micro B/Nd and Weiss constants of theta p=-64.9 K and theta p=-27.8 K for the cerium and neodymium compounds, respectively. Down to 1.8 K no long-range magnetic ordering could be detected. Thus, the large negative values for theta p indicate the presence of strong magnetic frustration within the compounds, which is due to the geometric arrangement of the magnetic sublattice in form of [OM4]10+ tetrahedra.     

About the Keggin isomers: crystal structure of [N(C4H9)4]-gamma-[SiMo2W10O40]n- (n= 4 or 6)

The tetrabutylammonium gamma-dodecatungstosilicate has been crystallized in a 6/1 acetonitrile/water solvent. An X-ray single-crystal analysis was carried out on [N(C4H9)4]4-gamma-[SiW12O40] which crystallizes in the orthorhombic system, space group P2(1)2(1)2(1), with a = 19.0881(3) A, b = 21.4435(3) A, c = 26.0799(1) A, V = 10674.9(2) A3, Z = 4, and rho(calcd) = 2.392 g/cm3. The idealized C2v arrangement of the anion results from the rotation of 60 degrees of two trigonal [W3O13] groups in the Keggin anion. Taking as reference the geometrical characteristics of the Keggin anion, it appears that the bond lengths and bonds angles within the four [W3O13] groups are not significantly modified while the mu-oxo junctions between the two rotated groups and those between the two unrotated groups involve more acute and opened W-O-W angles, respectively. The syntheses and 183W NMR characterizations of the mixed gamma-[SiW10Mo2O40]n- compounds corresponding to the oxidized (Mo(VI); n = 4) and to the two electron-reduced (Mo(V); n = 6) anions are reported. Structural analysis by 183W NMR has proved unambiguously that the C2v structure of the gamma-[SiW10O36]8- subunit is retained in both the compounds. The electronic behavior of the series gamma-[SiW10M2E2O36]6- (M = Mo or W; E = O or S) is examined, compared and related to 183W NMR data.     

A family of octahedral rhenium cluster complexes [Re6Q8(H2O)n(OH)6-n]n-4 (Q=S, Se; n=0-6): structural and pH-dependent spectroscopic studies

The conversions of hexahydroxo rhenium cluster complexes [Re6Q8(OH)6]4- (Q=S, Se) in aqueous solutions in a wide pH range were investigated by chemical methods and spectroscopic measurements. Dependences of the spectroscopic and excited-state properties of the solutions on pH have been studied in detail. It has been found that a pH decrease of aqueous solutions of the potassium salts K4[Re6Q8(OH)6].8H2O (Q=S, Se) results in the formation of aquahydroxo and hexaaqua cluster complexes with the general formula [Re6Q8(H2O)n(OH)6-n]n-4 that could be considered as a result of the protonation of the terminal OH- ligands in the hexahydroxo complexes. The compounds K2[Re6S8(H2O)2(OH)4].2H2O (1), [Re6S8(H2O)4(OH)2].12H2O (2), [Re6S8(H2O)6][Re6S6Br8].10H2O (3), and [Re6Se8(H2O)4(OH)2] (4) have been isolated and characterized by X-ray single-crystal diffraction and elemental analyses and infrared (IR) spectroscopy. In crystal structures of the aquahydroxo complexes, the cluster units are connected to each other by an extensive system of very strong hydrogen bonds between terminal ligands.     

An equilibrium analysis of the aqueous H+-MoO4(2-)-(HP)O(3)2- and H+-MoO4(2-)-(HP)O(3)2--HPO4(2-) systems

The speciation in the phosphitomolybdate system, H+-MoO4(2-)-(HP)O(3)2-, has been determined from combined potentiometric and 31P NMR measurements in 0.600 M Na(Cl) medium at 298(1) K. Potentiometric titration data were collected in the ranges 2.5<-log[H+]<6.2, 40.0相似文献