RhCo双金属催化剂的研究 I. RhCo双金属催化剂的金属-金属及金属-载体相互作用

利用XPS对以金属盐共浸渍制备的Rh+Co/Al2O3和Rh2Co2(CO)12为前体制备的Rh2Co2/Al2O3催化剂的金属-金属及金属-载体相互作用进行了详细研究。发现Rh+Co/Al2O3经400℃H2还原后, Rh的结合能与Rh^0的结合能接近, Co基本上以CoAl2O4状态存在, Co^0的谱峰很弱; 而Rh2Co2/Al2O3经400℃H2还原后, Rh的结合能与Rh^0接近, Co除以CoAl2O4状态存在外, 还有相当一部分以Co^0状态存在。上述结果揭示出两个样品的Rh-Al2O3的相互作用弱, Co-Al2O3的相互作用强。Rh+Co/Al2O3上Rh-Co相互作用弱, 而Rh2Co2/Al2O3在H2还原后仍保持RhCo簇合物的强的Rh-Co相互作用, 导致显著量的Co^0存在。     

用不同前驱体制备的Co/SiO2催化剂的结构及其CO2/CH4重整反应性能

 分别采用硝酸钴、醋酸钴、硫酸钴和氯化钴为前驱体制备了Co／SiO2催化剂,用XRD,TPR,SEM和H2－TPD等实验技术考察了钴盐前驱体对催化剂结构和二氧化碳重整甲烷反应性能的影响,重点考察了硝酸钴和醋酸钴的作用．结果表明,由醋酸钴制备的Co／SiO2催化剂有最佳的催化活性和稳定性,它在钴物种的存在状态、金属－载体相互作用、钴金属晶粒度及抗烧结、抗积炭能力等方面,均与由硝酸钴制备的Co／SiO2催化剂存在显著的差别．Co／SiO2催化剂的反应活性和稳定性分别与其金属分散度和抗烧结、抗积炭能力密切相关．     

N‐Doped Sub‐3 nm Co Nanoparticles as Highly Efficient and Durable Aerobic Oxidative Coupling Catalysts

A nano‐coating associated with sulfuric acid leaching protocol was developed to prepare N‐doped sub‐3 nm Co‐based nanoparticle catalyst (Co?N/C) using melamine–formaldehyde resin as the N‐containing precursor, active carbon as the support, and Co(NO₃)₂ as the Co‐containing precursor. By thermal treatment under nitrogen atmosphere at 800 °C and leached with sulfuric acid solution, a stable and highly dispersive Co?N coordination structure was uniformly dispersed on the formed Co?N/C catalyst with a Co loading of 0.47 wt % and Co nanoparticle size of 2.55 nm. The Co?N/C catalyst was characterized with XRD, XPS, Raman, SEM, TEM, ICP, and elemental analysis. The Co?N/C catalyst showed extremely high catalytic efficiency with a TON of 257 for the aerobic oxidative coupling of aldehydes with methanol to directly synthesize methyl esters with molecular oxygen as the final oxidant. The Co?N/C catalyst also showed broad substrate range and stable recyclability. After recycling for 7 times, no obvious deactivation was detected. It was confirmed that the sub‐3 nm Co?N coordination structure formed between metallic Co nanoparticles and pyridinic nitrogen doping into graphitic layers functions as the active site to activate molecular oxygen for the β‐H elimination from generated hemiacetal intermediates to produce methyl esters. The nano‐coating associated with acid leaching protocol provides a novel strategy to prepare highly efficient non‐precious metal‐based catalysts.     

Evaluation of [Co(gly)3]- as a 35Cl- NMR shift reagent for cellular studies

We studied the efficacy of the tris-glycinatocobaltate(II) complex ([Co(gly)(3)](-)) as a shift reagent (SR) for chloride by (35)Cl NMR spectroscopy and compared to that of Co(2+)((aq)). Due to the relatively low thermodynamic stability of [Co(gly)(3)](-), a 1:3 Co(II)/gly stoichiometric solution at physiological pH is approximately a 2:1 mixture of [Co(gly)(2)(H(2)O)(2)] and [Co(gly)(H(2)O)(4)](+). This SR was found to be stable up to higher pH values than Co(2+)((aq)), better preventing Co(OH)(2) formation at alkaline pH. No significant differences in the (35)Cl(-) NMR chemical shift induced by Co(II)/gly or Co(2+)((aq)) were observed in the presence of physiological concentrations of either Ca(2+) or Mg(2+), or of either Na(+) or K(+). Although Co(2+)((aq)) was almost twice as effective as Co(II)/gly in shifting the (35)Cl(-) NMR resonance at the same high rho ([SR]/[Cl(-)]) value and low ionic strength, Co(2+)((aq)) showed a significant decrease (p < 0.05) in the (35)Cl(-) chemical shift at higher ionic strength. Line widths at half-height were significantly (p < 0.05) less for Co(II)/gly than for Co(2+)((aq)) at rho values in the range 0.066-0.40. Intracellular chloride was clearly detectable by (35)Cl NMR spectroscopy in human skin fibroblast cells suspended in medium containing 40 mM Co(II)/gly SR. We determined that, although Co(2+)((aq)) provides a larger shift than Co(II)/gly at the same rho value, there are significant advantages for using Co(II)/gly, such as pH stability, ionic strength independent chemical shifts, narrow (35)Cl(-) NMR resonances, and reduced cellular toxicity, as a SR in biological systems.     

Electrochemistry of vitamin B12: Part IX. The Co(III)/Co(II) couple in non-aqueous solvents

The thermodynamic and kinetic characteristics of the Co(III)/Co(II) couple are investigated as a function of the solvent and thesixth axial ligand. With solvatocobalamins the thermodynamics of the Co(III)/Co(II) oxido-reduction reaction essentially reflect the strength of the Co(III)-solvent interaction. The order of the solvents in this connection appears to beH₂O>DMSO>ROH. The kinetics of the reaction parallels and amplifies the thermodynamic effects: the stronger the Co(III)-solvent interaction, the slower the reaction. While chloride and acetate ions appear as very weak ligands in water, they are much stronger in aliphatic alcohols and DMSO. The variations of the thermodynamic factors observed as a function of the solvents and the ligands are rationalized in terms of interaction of the solvent with Co(II) and with the anionic ligand and of the affinity of the ligand with Co(III). The kinetics of the Co(III)/Co(II) oxido-reduction reaction, involving both electron transfer and bond-breaking, again parallels and amplifies the thermodynamic effect. The stretching of the Co-ligand bond and the solvation of the anionicligands appear as the main kinetic factors.     

基于ZIFs合成的中空双金属(Zn,Co)S纳米晶及其赝电容性质研究

通过两步法设计合成了具有中空结构的双金属硫化物（Zn,Co）S纳米晶,并研究了其电化学性质.首先在室温下,以水为溶剂,十六烷基三甲基溴化铵为表面活性剂,利用Zn²⁺,Co²⁺与2-甲基咪唑的配位作用形成了ZIF-Zn,Co.然后以ZIF-Zn,Co为自牺牲模板剂,加入硫代乙酰胺,在微波辐射下快速合成了具有中空结构的（Zn,Co）S纳米晶.电化学测试结果表明,在电流密度为3 mA/cm²时,（Zn,Co）S纳米晶比电容为423.3 F/g,在电流密度为10 mA/cm²时,充放电2000次,仍能保持59%的初始电容.所制备的中空纳米结构具有较高的比表面积和较好的电化学性能,可作为超级电容器的电极材料.     

Unexpected change in charge transfer behavior in a cobalt(II) porphyrin-fullerene conjugate that stabilizes radical ion pair states

Two cobalt(II) porphyrin-C(60) malonate-linked conjugates, the mono-connected Co1 and the bis-connected trans-2 isomer Co3, have been synthesized for the first time either by direct cyclopropanation with the precursor malonate Co4 or by metalation of the bisadduct H(2)3. For the investigation of the interaction between the porphyrin donor and fullerene acceptor within these dyads, electrochemical and photophysical investigations have been carried out. Compared to Zn3 and trans-2 bisadduct 7, the first reduction of the fullerene moiety within Co3 becomes easier (40 mV in dichloromethane and 20 mV in benzonitrile), indicating significant interactions between the pi-system of the fullerene and the d-orbitals of the central Co atom. Compared to the Co complexes 9, Co4, and Co1, the first oxidation of Co3 is considerably shifted to more positive potentials, if benzonitrile instead of dichloromethane is used as solvent. At the same time, the oxidation is no longer centered on the Co(II) center but on the porphyrin macrocycle, as corroborated by spectroelectrochemistry. A similar solvent dependence was observed in transient absorption spectroscopic measurements. In toluene, benzonitrile and anisole photoinduced electron transfer within Co3 leads to the formation of a charge-separated state Co(II)P.+ -C(60).- with a lifetime of 560 +/- 20 ns in benzonitrile, whereas in other solvents such as THF, nitrobenzene, ortho-diclorobenzene, and tert-butylbenzene the formation of a Co(III)P-C(60).- as transient was detected, which is, however, short-lived (860 +/- 40 ps in THF) and exhibits charge recombination dynamics that are in the Marcus inverted region. Particularly important is the fact that the electronic coupling (V) in Co(III)P-C(60).- is 18 cm(-1) substantially smaller than the V value of 313 cm(-1) in ZnP.+ -C(60).- .     

Co-K-Mo/γ-Al2O3催化剂的合成低碳醇性能及其结构研究

氧化态Ｋ－ＭｏＯ３／γ－Ａｌ２Ｏ３催化剂中添加Ｃｏ（ＮＯ３）２后在空气中四个不同温度下焙烧再硫化,制得Ｃｏ－Ｋ－ＭｏＯ３／γＡｌ２Ｏ３催化剂,对其ＣＯ加氢合成低碳醇的催化反应性能进行了评价,运用ＸＲＤ,ＬＲＳ及ＥＸＡＦＳ等手段对催化剂及其氧化态前躯体的结构进行了表征,活性测试结果表明加Ｃｏ后于５００－６５０℃焙烧制得的催化剂活性较高,且使Ｃ２＋醇比例增加,结构分析结果显示加Ｃｏ后３５０℃焙烧时,Ｃ     

TPR/TPO characterization of cobalt–silicon mixed oxide nanocomposites prepared by sol–gel

Cobalt–silicon mixed oxides with Co/Si ratio of 10/90 (10Co), 20/80 (20Co) and 30/70 (30Co) were prepared by a modified sol–gel method. The materials treated in air at 400 and 600 °C were characterized by SEM and TPR/TPO techniques. TPR measurements showed that in all samples only a fraction of Co was present as Co₃O₄ and as amorphous silicate and was reducible by H₂ within 800 °C, while a part was not reducible under TPR conditions. The fraction of Co not reducible decreased with increasing Co content. A TPO/TPR cycle gave rise to an increase of the fraction of not reducible Co.     

Solution combustion synthesis of Co oxide-based catalysts for phenol degradation in aqueous solution

Solution combustion using urea as a fuel was employed to synthesise Co oxide and Al(2)O(3)-, SiO(2)- and TiO(2)-supported Co oxide catalysts. The catalysts were characterised using several techniques such as N(2) adsorption/desorption, XRD, FTIR, UV-vis diffuse reflectance and SEM-EDX, and their catalytic activity was evaluated in phenol degradation in aqueous solution with sulphate radicals. Solution combustion is a simple and effective method in preparation of supported Co catalysts. Co(3)O(4) was the major Co crystal phase in the samples prepared via the combustion synthesis. Bulk Co(3)O(4) particles were not effective in reaction, but supported Co oxides showed higher activity than unsupported Co oxide. The supports influenced Co dispersion and catalytic activity. Co/TiO(2) exhibited the highest activity, but it deactivated much faster than other two supported catalysts. Co/SiO(2) showed a comparable activity to Co/Al(2)O(3) and the best stability among the three Al(2)O(3)-, SiO(2)- and TiO(2)-supported Co catalysts.     

Sorption and desorption of Co(II) on montmorillonite in presence and absence of fulvic acid

Sorption and desorption of Co(II) on montmorillonite under ambient conditions as a function of pH, ionic strength and fulvic acid are studied by batch technique. The results indicate that the sorption of Co(II) is dependent on pH, and ionic strength. The sorption-desorption hysteresis is found in the desorption tests. Surface complexation is considered as the main sorption mechanism of Co(II) on montmorillonite. The presence of fulvic acid (FA) enhances the sorption of Co(II) on montmorillonite. Montmorillonite is considered as a promising candidate for the solidification and pre-concentration of Co(II) from large volume of solutions.     

Guided ion-beam studies of the kinetic-energy-dependent reactions of Co(n)+ (n = 2-16) with D2: cobalt cluster-deuteride bond energies

The kinetic-energy-dependent cross sections for the reactions of Co(n)+ (n = 2-16) with D2 are measured as a function of kinetic energy over a range of 0-8 eV in a guided ion-beam tandem mass spectrometer. The observed products are Co(n) D+ for all clusters and Co(n)D2+ for n = 4,5,9-16. Reactions for the formation of Co(n)D+ (n = 2-16) and Co9D2+ are observed to exhibit thresholds, whereas cross sections for the formation of Co(n)D2+ (n = 4,5,10-16) exhibit exothermic reaction behavior. The Co(n)+-D bond energies as a function of cluster size are derived from the threshold analysis of the kinetic-energy dependence of the endothermic reactions and are compared to previously determined metal-metal bond energies, D0(Co(n)+-Co). The bond energies of Co(n)+-D generally increase as the cluster size increases, and roughly parallel those for Co(n)+-Co for clusters n > or = 4. These trends are explained in terms of electronic and geometric structures for the Co(n)+ clusters. The bond energies of Co(n)+-D for larger clusters (n > or = 10) are found to be very close to the value for chemisorption of atomic hydrogen on bulk-phase cobalt. The rate constants for D2 chemisorption on the cationic clusters are compared with the results from previous work on cationic and neutral cobalt clusters.     

Der Chemische Transport ternärer intermetallischer Phasen in den Systemen Cr/Co/Ge und Co/Ta/Ge

Chemical Vapor Transport of Intermetallic Systems. 11 Chemical Vapor Transport of Ternary Intermetallic Phases in the Systems Cr/Co/Ge and Co/Ta/Ge By means of chemical vapor transport using iodine as transport agent it is possible to prepare a number of ternary intermetallic compounds in the system Co/Cr/Ge as single crystals. The transport behaviour in this ternary system is related to that in the binary systems. Some informations are given about transport phenomena in the systems Co/Cr and Co/Ta/Ge.     

超声辅助化学还原法制备高活性Co-B非晶态合金催化剂

采用超声辅助KBH4化学还原Co(OH)2胶体法制备了粒径均匀的Co-B非晶态合金.在乙腈液相选择性加氢制取乙胺反应中,与传统化学还原法制备的Co-B非晶态合金催化剂相比,该催化剂具有很高的催化活性.这归因于其Co活性位的高度分散、Co活性位对氢的强吸附,以及Co-B非晶态合金间强电子相互作用.     

Structural and magnetic studies of original tetranuclear CoII-LnIII complexes (LnIII = Gd, Tb, Y)

The syntheses, structural determinations and magnetic studies of tetranuclear Co(II)-Ln(III) complexes (Ln = Y, Gd, Tb) involving orthovanillin as main ligand are described. The structural studies demonstrate that centrosymmetric tetranuclear Co(2)-Ln(2) complex molecules with a defect-dicubane central core are obtained, with hexacoordinate Co ions in deformed octahedral environments and nine-coordinate lanthanide ions. The Co ions are linked by two hydroxo bridges and each Co ion is also involved in a double phenoxo-hydroxo bridge with the two Ln ions, so that each hydroxo group is triply linked to the two Co and one Gd ions. The four metal ions are coplanar. A ferromagnetic Co-Ln interaction operates in the Co(2)-Ln(2) complexes (Ln = Gd, Tb), along with a D zero-field splitting term for the cobalt ion and a weak ferromagnetic Co-Co interaction. The SMM behaviour of the Co(2)-Gd(2) complex is confirmed by observation of hysteresis loops, as a consequence of the slowing down of relaxation for this tetranuclear complex. The Co(2)-Tb(2) complex does not behave as a SMM, what could result from a subtractive combination of the Tb and Co anisotropies and an increased transverse anisotropy, leading to large tunnel splittings and quantum tunneling of magnetization.     

离子液体中电沉积制备钴纳米线阵列

Porous anodic alumina (PAA) was used as a template to prepare Co nanowires array from 1-ethyl-3-methylimidazolium chloride ionic liquid by direct current method. The surface morphology of porous anodic alumina template was observed by field emission-scanning tunneling microscopy (FE-SEM) before and after the electrodeposition of Co nanowires. The electrodeposition of Co nanowires was characterized by transmission electron microscopy (TEM) and X-ray powder diffraction (XRD). TEM results indicate that the Co nanowire surface is coarse and porous when aqueous solution was used as electrolyte， and the Co nanowire deposited from the ionic liquid is uniform and smooth. XRD results show that the electrodeposition of Co is a mixture of crystal and microcrystal phase.     

Mechanism of four-electron reduction of dioxygen to water by ferrocene derivatives in the presence of perchloric acid in benzonitrile, catalyzed by cofacial dicobalt porphyrins

The selective two-electron reduction of dioxygen occurs in the case of a monocobalt porphyrin [Co(OEP)], whereas the selective four-electron reduction of dioxygen occurs in the case of a cofacial dicobalt porphyrin [Co(2)(DPX)]. The other cofacial dicobalt porphyrins [Co(2)(DPA), Co(2)(DPB), and Co(2)(DPD)] also catalyze the two-electron reduction of dioxygen, but the four-electron reduction is not as efficient as in the case of Co(2)(DPX). The micro-superoxo species of cofacial dicobalt porphyrins were produced by the reactions of cofacial dicobalt(II) porphyrins with dioxygen in the presence of a bulky base and the subsequent one-electron oxidation of the resulting micro-peroxo species by iodine. The superhyperfine structure due to two equivalent cobalt nuclei was observed at room temperature in the ESR spectra of the micro-superoxo species. The superhyperfine coupling constant of the micro-superoxo species of Co(2)(DPX) is the largest among those of cofacial dicobalt porphyrins. This indicates that the efficient catalysis by Co(2)(DPX) for the four-electron reduction of dioxygen by Fe(C(5)H(4)Me)(2) results from the strong binding of the reduced oxygen with Co(2)(DPX) which has a subtle distance between two cobalt nuclei for the oxygen binding. Mechanisms of the catalytic two-electron and four-electron reduction of dioxygen by ferrocene derivatives will be discussed on the basis of detailed kinetics studies on the overall catalytic reactions as well as on each redox reaction in the catalytic cycle. The turnover-determining step in the Co(OEP)-catalyzed two-electron reduction of dioxygen is an electron transfer from ferrocene derivatives to Co(OEP)(+), whereas the turnover-determining step in the Co(2)(DPX)-catalyzed four-electron reduction of dioxygen changes from the electron transfer to the O-O bond cleavage of the peroxo species of Co(2)(DPX), depending on the electron donor ability of ferrocene derivatives.     

Ni含量对Co_(1-x)Ni_xB催化水解放氢性能的影响(英文)

采用化学还原法以乙醇为溶剂在冰水浴中合成了一系列Co1-xNixB合金催化剂,研究了该系列合金不同Ni含量对NaBH4水解放氢性能的影响.X射线衍射(XRD),扫描电镜(SEM)和透射电镜(TEM)显示Co1-xNixB合金是纳米非晶态颗粒.放氢测试表明Co1-xNixB具有很高的催化活性.放氢速率先随着Ni含量的增加而增大,并在x=0.15时放氢速率达到最大值,然后随x值的增加而减小.298K时Co0.85Ni0.15B合金催化碱性硼氢化钠水解的最大放氢速率可达4228mL·min-1·g-1,CoB和Co0.85Ni0.15B合金催化放氢的活化能分别为34.25和31.87kJ·mol-1.因此以乙醇为溶剂合成的Co1-xNixB合金具有较高的催化活性.     

Co3O4/CeO2 CO氧化的原位红外光谱研究

采用沉淀氧化法制备了Co₃O₄/CeO₂催化剂。分别在干、湿条件下进行了一氧化碳氧化反应研究。运用FT-IR表征手段,在钴铈复合氧化物上进行了CO吸附及CO/O₂共吸附研究。结果表明,与纯的Co₃O₄样品相比,Co₃O₄/CeO₂具有明显的抗湿气能力。Co₃O₄/CeO₂催化剂在进行CO氧化时,表面形成了类碳酸盐物种。当环境温度低于453 K时,催化剂上类碳酸盐的生成与形成类碳酸盐物种后受热分解存在着动态平衡。当环境温度高于493 K,催化剂上生成的类碳酸盐物全部受热分解。氧化铈的加入提高了催化剂的抗湿气性能。较小粒径的Co₃O₄与CeO₂产生的强相互作用可使CeO₂向Co₃O₄提供氧,因而间接提供了CO氧化需要的氧。     

Synthesis, crystal structure, and electron paramagnetic resonance investigations of heteronuclear Co(II)/Zn(II) and Co(II)/Cd(II) coordination polymers

The crystal structures of five new Co(II), Zn(II), and Cd(II) coordination polymers based on pyridine-substituted triazolyl carboxylates are reported. The two isomorphous compounds (∞)3[M(Me-3py-pba)?] (M = Zn, Co) possess {6?} topology (dia). In order to obtain heteronuclear compounds, we synthesized Co(II)-substituted Zn(II) and Cd(II) coordination polymers. At T = 5 K, the powder samples of the diamagnetically diluted Co(II)/Zn(II) and Co(II)/Cd(II) systems [Co/(Zn,Cd) ≈ 0.01] show intense electron paramagnetic resonance spectra, which were analyzed with an effective spin of S' = ?. The g tensor as well as the ??Co hyperfine tensor A(Co) are strongly anisotropic. The g tensor components are used to gain information about the symmetry of the Co(II) coordination sphere and covalency effects. Differential thermal analysis/thermogravimetry-mass spectrometry and temperature-dependent powder X-ray diffraction studies reveal high thermal stability of the three-dimensional coordination polymers up to 390 °C.