Complexation of Sc(III), Ga(III), In(III) and Ln(III) with Eriochrome Red B

Cyclic linear-sweep voltammetry was used to study the complexation of Sc(III), Ga(III), In(III) and Ln(III) with eriochrome red B (ERB). It was established that all metal ions investigated form complex compounds with azodye having a mole ratio, M(III):ERB = 1:2. The hydroxo forms of M(III) ions, which take part in interaction with ERB, were determined by the Nazarenko method. The stability constants for the formation of these chelates are nearly the same. It was shown that the reduction of the ligand in the complex does not only depend on the peculiarities of complexation, but the processes occurring in pre-electrode layer also influence it.     

The Interaction of Arsenazo III with Nd(III)—A Chemometric and Metrological Analysis

Interactions of Arsenazo III with Nd(III) in aqueous solutions (pH range 3 to 4) were studied using a spectrophotometric method. Some discrepancies are present in literature concerning the concentrations of the prevailing species and their composition. Threshold bootstrap computer-assisted target factor analysis (TB CAT) was applied to the evaluation of UV-VIS spectra of Arsenazo III in aqueous solutions containing varying amounts of neodymium(III) ions. The thus obtained experimental data are interpreted with consideration of the measurement uncertainties affecting this system. Within the limits of resolution of the experimental method, two complexes NdAazo and Nd(Aazo)₂ were indicated in the studied pH range. The values of formation constants for log ₁₀ β ₁₁ fall in the range 4.9 to 6.3 and for log ₁₀ β ₁₂ fall between 10.5 and 12.1.     

Densities and Viscosities of Tris(acetylacetonato)cobalt(III) Complex Solutions in Various Solvents

The densities and the viscosities of tris(acetylacetonato)cobalt(III) solutions in acetonitrile, dichloromethane, chloroform, tetrachloromethane, benzene, toluene, ethylbenzene, and p-xylene were measured in the dilute concentration regions at several temperatures ranging from 278 to 313 K under ambient pressure. The partial molar volumes of the solvents and solute were calculated. They are independent of concentration and increase slightly as the temperature increases. The viscosity A- and B-coefficients of the Jones-Dole equation were obtained. The A-coefficients were found to be zero within experimental error. The B-coefficients are positive and decrease as the temperature increases. Thermodynamic quantities of activation for viscous flow were calculated on the basis of Eyring’s viscosity equation. From the quantities obtained in this study, along with some information from the literature, it is suggested that structure-making interactions occur between the segments of the complex and the solvent molecules. These interactions include electrostatic interactions between the local charge on the complex and the dipole moment of the solvent in solutions of acetonitrile and dichloromethane, interlocking packing interactions along C ₃-axis of the complex with solvent in solutions of chloroform and tetrachloromethane, and π-electron interactions between the chelate ring of the complex and the solvent in solutions of benzene, toluene, ethylbenzene, and p-xylene.     

Complexation of Eu(III), Am(III) and Cm(III) with Dicarboxylates: Thermodynamics and Structural Aspects of the Binary and Ternary Complexes

The complexation of Eu(III), Am(III) and Cm(III) with dicarboxylate anions with O, N or S donor groups was measured in I=6.60 mol⋅kg⁻¹ (NaClO₄) at temperatures of 0–60 °C by potentiometry and solvent extraction. The complexation thermodynamics of these complexes show that their stability is due to highly favorable complexation entropies because the complexation enthalpies are endothermic. Luminescence studies with Eu(III) and Cm(III) were used to measure the hydration numbers of the complexes. NMR spectra of ¹H and ¹³C were used to determine the binding modes of La(III) with the ligands. The formation of 1:1:1 ternary complexes of M(EDTA)⁻ with the dicarboxylate ligands was studied to determine changes in coordination of the metal cation with formation of the ternary species. The complexation of ternary complexes changes from bidentate to monodentate as the chain length between the binding sites of the dicarboxylates increases from 1 (malonate) to 4 (adipate). DFT computations were used to confirm the structural aspects of the interaction of these complexes.     

Spectral and Mechanistic Investigation of the Osmium(VIII) Catalyzed Oxidation of Diclofenac Sodium by the Copper(III) Periodate Complex in Aqueous Alkaline Medium

The kinetics of the osmium(VIII) (Os(VIII)) catalyzed oxidation of diclofenac sodium (DFS) by diperiodatocuprate(III) (DPC) in aqueous alkaline medium has been studied spectrophotometrically at a constant ionic strength of 1.0 mol⋅dm⁻³. The reaction showed first order kinetics in [Os(VIII)] and [DPC] and less than unit order with respect to [DFS] and [alkali]. The rate decreased with increase in [periodate]. The reaction between DFS and DPC in alkaline medium exhibits 1:2 [DFS]:[DPC] stoichiometry. However, the order in [DFS] and [OH⁻] changes from first order to zero order as their concentration increases. Changes in the ionic strength and dielectric constant did not affect the rate of reaction. The oxidation products were identified by LC-ESI-MS, NMR, and IR spectroscopic studies. A possible mechanism is proposed. The reaction constants involved in the different steps of the mechanism were calculated. The catalytic constant (K _C) was also calculated for Os(VIII) catalysis at the studied temperatures. From plots of log ₁₀ K _C versus 1/T, values of activation parameters have been evaluated with respect to the catalytic reaction. The activation parameters with respect to the slow step of the mechanism were computed and discussed, and thermodynamic quantities were also determined. The active osmium(VIII) and copper(III) periodate species have been identified.     

Extraction chromatographic study of aluminium(III) and mutual separation of aluminium(III), gallium(III), indium(III) and thallium(III) with N-n-octylaniline

A selective method has been developed for extraction chromatographic studies of aluminium(III) and its separation from several metal ions with a chromatographic column containing N-n-octylaniline (liquid anion exchanger) coated on silanized silica gel as a stationary phase. The aluminium(III) was quantitatively extracted with the 0.065 mol/L N-n-octylaninine from 0.013 to 0.05 mol/L sodium succinate at a flow rate of 1.0 mL/min. The extracted metal ion has been recovered by eluting with 25.0 mL of 0.05 mol/L hydrochloric acid and estimated spectrophotometrically with aurintricarboxylic acid. The effects of the acid concentration, the reagent concentration, the flow rate and the eluting agents have been investigated. The log-log plots of distribution coefficient (KdAl(III)) versus N-n-octylaniline concentrationin 0.005 and 0.007 mol/L sodium succinate gave theslopes 0.5 and 0.7 respectively and showed theprobable composition of theextracted species was 1:1 (metal to amine ratio) and the nature of extracted species is [RR''NH2+ Al succinate2-] org. .The extraction of aluminium(III) was carried out in the presence of various ions to ascertain the tolerance limit of individual ions. Aluminium(III) has been separated from multicomponent mixtures, pharmaceutical samples and synthetic mixtures corresponding to alloys. A scheme for mutual separation of aluminium(III), indium(III), gallium(III) and thallium(III) has been developed by using suitable masking agents. The method is fast, accurate and precise.     

Transport behaviour of the lanthanide 152Eu(III), 153Gd(III) and 170Tm(III) and transplutonium element 254Es(III), 244Cm(III), 241Am(III), 249Cf(III) and 249Bk(III) ions in aqueous solutions at 298 K

Ionic self-diffusion coefficients (D) for trivalent radiotracers, lanthanide and actinide ions have been determined in concentrated aqueous solutions of supporting electrolytes of Gd(NO₃)₃–HNO₃ or Nd(ClO₃)₄–HClO₄ up to 1.5 mol L^?1 at 298.15 K and pH 2.50 by the open-end capillary method. The data obtained in large range of concentrations, allow to derive the limiting value D°, the validity of the Onsager limiting law and a more extended law. This study contributes to demonstrate similarities in transport and structure properties between 4f and 5f trivalent ions explained by a similar electronic configuration, ionic radius and hydration number. An empirical equation is suggested for predicting ionic hydration number with a good precision.     

Ruthenium(III) Catalyzed Oxidative Degradation of Amitriptyline-A Tricyclic Antidepressant Drug by Permanganate in Aqueous Acidic Medium

The oxidation of amitriptyline by potassium permanganate has been investigated spectrophotometrically in the presence of ruthenium(III) as catalyst in aqueous acidic medium at a constant ionic strength of 0.20 mol⋅dm⁻³. The stoichiometry was found to be 1:1 in terms of the mole ratio of amitriptyline and permanganate ions consumed. The order of the reaction with respect to manganese(VII) and ruthenium(III) concentration was unity while the order with respect to amitriptyline was less than unity over the concentration range studied. The rate increased with an increase in acid concentration. The reaction rates revealed that the Ru(III) catalyzed reaction was about eight-fold faster than the uncatalyzed reaction. The oxidation products were identified by spectral analysis. A tentative mechanism consistent with the kinetics has been proposed. The reaction constants involved in the different steps of the reaction mechanism were calculated. Kinetic experiments suggest that HMnO₄ is the reactive permanganate species and [Ru(H₂O)₆]³⁺ is the reactive Ru(III) species.     

Ferrocene-containing ligands in the self-assembly of trinuclear μ3-oxocentered carboxylate complexes of chromium(III, III, III)carboxylate complexes of chromium(III, III, III)

New trinuclear μ₃-oxocentered chromium(III, III, III) complexes were obtained by the self-assembly of ferrocenecarboxylate ligands and the Cr₃O fragment. The complexes were investigated by fast-atom bombardment (FAB) mass spectrometry, cyclic voltammetry, and electronic and IR spectroscopy. V. I. Vernadskii Institute of General and Inorganic Chemistry, National Academy of Sciences of Ukraine, 32/34 Prospekt Akademika Vernadskogo, Kiev 03142, Ukraine. Translated from Teoreticheskaya i éksperimental'naya Khimiya, Vol. 36, No. 4, pp. 233–237, July–August, 2000.     

Kinetic and Dynamic Aspects of Arsenic Adsorption by Fe(III)-Loaded Sponge

Nowadays there is a great concern about new adsorbent materials for either the removal or fixation of arsenic species because of their high toxicity and the health problems associated with such species. In this paper the kinetics of absorption of As(V) on Fe(III)-loaded sponge have been studied and the results are compared with those of other natural and synthetic adsorbents. Arsenate was adsorbed very rapidly by Fe(III)-loaded sponge with saturation being reached in less than ten minutes. Arsenate was also adsorbed by Fe(III)-loaded Lewatit-TP-207 and non-loaded Purolite A100S ion-exchange resins but the times required to reach total saturation of the adsorbent were more than 100 minutes. The experimental data followed first-order kinetics. The extraordinarily superior kinetics are postulated to be related to the open-celled internal structure of the sponge material. The effect of flow rate on the dynamic removal of As(V) was studied in a fixed-bed column reactor for Fe(III)-loaded sponge and Fe(III)-loaded resin. The adsorption of As(V) on fixed-bed columns of adsorbent also indicated better kinetic properties for the sponge. Column studies showed a good correlation between the experimental data and the calculated breakthrough curves obtained by the Wolborska and Clark models. Application of the Wolborska model to the data at low C/C ₀ ratios enabled the determination of the kinetic coefficient of mass transfer for the sponge and resin materials at the different flow rates used and gave a good prediction of the 5% breakthrough times. Furthermore, the breakthrough curves were well described by the Clark model at the ratios of concentration of effluent to influent up to 0.5 for the sponge and 0.3 for the Fe(III)-loaded resin. Above these levels, a large deviation occurred for the resin adsorption. Thus, the sponge was found to be kinetically effective and favored for As(V) adsorption from solution over the conventional adsorbents used and for most of the adsorbents reported in the bibliography.     

Liquid secondary ion mass spectrometry of several β-diketonates of cobalt(III) and chromium(III)

The positive, liquid secondary ion (LSI) mass spectra of six cobalt(III) and three chromium(III) (β-diketonates ligand = L^?) were examined in a 3-nitrobenzyl alcohol matrix. The complexes of both metals yield clean, matrix-free mass spectra, but there are important differences between them. The cobalt compounds show prominent peaks assignable to the molecular ion, CoL ₃ ⁺ , of the monomeric chelates, together with abundant dimeric ions, such as Co₂L ₄ ⁺ and Co₂L ₃ ⁺ ; in contrast, chromium complexes show protonated monomers, CrL₃H⁺, in addition to ionized monomers, CrL ₃ ⁺ , and only minor formation of dimeric ions. The collisionally-activated dissociation (CAD) mass spectrum of Co₂L ₄ ⁺ shows fragmentation to CoL ₂ ⁺ and Co₂L ₃ ⁺ . That of Co₂L ₃ ⁺ shows fragmentation only to dimeric ions, including Co₂L ₂ ⁺ and, for thienyl or phenyl substituted ligands, to Co₂L₂Ar⁺ or Co₂LAr⁺ (Ar = thienyl or phenyl). Neither Co₂L ₄ ⁺ nor Co₂L ₃ ⁺ dissociates to the CoL ₃ ⁺ ion. The LSI mass spectrum of a mixture of two different cobalt chelates shows dimeric ions containing both types of ligand, which can be explained by ion-molecule reactions in the selvedge region. The differing behaviors of the cobalt and chromium complexes is attributed to the relatively greater stability of the +2 oxidation state for cobalt than for chromium.     

Synthesis,Spectra and Crystal Structure of Tetrakis(Triphenylarsine Oxide)Iron(III)-μ-Oxo-Tribromoiron(III) Tetrabromoferrate(III)-Acetonitrile

The oxidation of triphenylarsine with dioxygen in reaction systems containing some iron compound and Br^- anions in acetonitrile leads to the formation of a novel unsymmetrical oxo-bridged diiron(III) complex [(OAsPh₃)₄ Fe(μ-O)FeBr₃]⁺ [FeBr₄]^- ·CH₃CN, where OAsPh₃ is triphenylarsine oxide. The title complex is also formed by direct reaction of iron(III) bromide and OAsPh₃ with dioxygen in acetonitrile solution. The crystal structure of the complex was solved by X-ray diffraction techniques. The cation contains two unsymmetrical species with an Fe-O-Fe bond angle of 159.2(2)°; one iron atom is pentacoordinated by four OAsPh₃ ligands and a γ-oxo ligand which connects the tetracoordinated Fe atom with the FeBr₃O chromophore. Structural parameters and IR spectra of similar complexes are compared and discussed.     

Mechanism of the Deaquation of Aquopentaaminocobalt(III) Bromide

ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｓｏｌｉｄ ｐｈａｓｅｄｅａｑｕａｔｉｏｎ ａｎａｔｉｏｎｒｅａｃｔｉｏｎ[Ｍ(ＮＨ3 ) 5(Ｈ2 Ｏ) ]Ｘ3 → [Ｍ(ＮＨ3 ) 5Ｘ]Ｘ2 +Ｈ2 Ｏ(Ｍ =Ｃｏ3 + ,Ｃｒ3 + ｏｒＲｕ3 + ａｎｄＸ =Ｃｌ- ,Ｂｒ- ｏｒＮＣＳ- )ｈａｓｂｅｅｎｗｉｄｅｌｙｓｔｕｄｉｅｄｓｉｎｃｅｔｈｅｎｉｎｅｔｅｅｎｓｉｘｔｉｅｓ .Ｔｈｅｔｈｅｒｍａｌａｎｄｋｉｎｅｔｉｃｐａｒａｍｅｔｅｒｓｈａｖｅｂｅｅｎｃａｌｃｕｌａｔｅｄａｎｄｔｈｅｄｉｆｆｅｒｅｎｔｍｅｃｈａｎｉｓｍｈａｓｂｅｅｎｐｒｏｐｏｓｅｄａｎｄｄ…     

Interaction of Chromium(III) with Chrome Azurol S in Water–Glycerol Media

The interaction of Cr(III) with Chrome azurol S (CAS) in water–glycerol binary mixtures has been investigated by spectrophotometry. The absorption electronic spectra of Chrome azurol S and its complex with Cr(III) in water–glycerol media with glycerol contents from 10 to 50% by vol. have been measured. The stability constant of the complex in water–glycerol binary mixtures has been determined. It has been shown that the rate of reaction increases as the organic solvent content increases.     

Thermal analysis of rare-earth metal(III) hexa(isothiocyanato)chromate(III) complexes with ɛ-caprolactam

Thermal decomposition of the complexes [LnL₈][Cr(NCS)₆] (Ln = La³⁺, Ce³⁺, Pr³⁺, Nd³⁺, Sm³⁺, Eu³⁺, Gd³⁺, Tb³⁺, Dy³⁺, Ho³⁺, Er³⁺, Tm³⁺, Yb³⁺, Lu³⁺; L = ɛ-C₆H₁₁NO) in air and in inert atmosphere was studied by thermogravimetry, X-ray phase analysis, IR spectroscopy, and mass spectrometry. The compositions of gaseous and solid thermolysis products were established. A reversible thermochromic effect was found on heating to 200–210°C.     

Speciation of the Vanadium(III) Complexes with 1,10-Phenanthroline, 2,2′-Bipyridine,and 8-Hydroxyquinoline

The complex species formed between vanadium(III) and 1,10-phenanthroline (phen), 2,2′-bipyridine (bipy), and 8-hydroxyquinoline (8hq) were studied in aqueous solution by means of electromotive forces measurements, emf(H), at 25 °C with 3.0 mol⋅dm⁻³ KCl as the ionic medium. The potentiometric data were analyzed using the least-squares computational program LETAGROP, taking into account the hydrolytic vanadium(III) species formed in solution. Analysis of the vanadium(III)–phen system data shows the formation of [VHL]⁴⁺, [V(OH)L]²⁺, [V₂OL₂]⁴⁺ and [V₂OL₄]⁴⁺ complexes. In the vanadium(III)–bipy system the [VHL]⁴⁺, [V(OH)L]²⁺, [V₂OL₂]⁴⁺ and [V₂OL₄]⁴⁺ complexes were observed, and in the vanadium(III)–8hq system the complexes [V(OH)L]⁺, [V(OH)₂L], [VL₂]⁺ and [VL₃] were detected.     

Spectrophotometric Studies of the Thermodynamics of Molecular Complexation between Free Base Meso-Tetraarylporphyrins and Iodine(III) Chloride

A spectrophotometric method was used for the molecular complexation of ICl₃ with para-substituted meso-tetraarylporphyrins (H₂t(4-X)pp; X: OCH₃, CH(CH₃)₂, CH₃, H and Cl) in methanol/chloroform (2.5% v/v) solution. The equilibrium constants and the thermodynamic parameters were measured spectrophotometrically at various temperatures for 1:1 molecular complex formation of meso-tetraarylporphyrins as electron donors with ICl₃ as the electron acceptor. The formation constants for the molecular complexes change according to the following trend: [ICl₃(H₂t(4-OCH₃)pp)]>[ICl₃(H₂t(4-CH(CH₃)₂)pp)]>[ICl₃(H₂t(4-CH₃)pp)]>[ICl₃(H₂tpp)]>([ICl₃(H₂t(4-Cl)pp)]. Further, the thermodynamic parameters, ΔG ^o,ΔH ^o and ΔS ^o, for formation of the complexes were obtained.     

Salen-Mn(III)-Complex-Catalyzed Oxidations of Secondary Alcohols

IntroductionCarbonylgroupsarethemostimportantfunctionalgroupsinorganicsynthesis ,andtheirintroductionbyoxi dationchemistrystartingfromalcoholsisaprocessofmajorimportance .1Earlyprotocolsforthistransformationreliedontheuseofstoichiometricoxidantssuchaschromium(VI)reagentsorMnO2 .2 Withthegoalofimprovingsyn theticefficiencyandavoidingpotentialenvironmentalhaz ards ,prominentsuccessinthisdirectionhasbeenrecentlyachievedbyutilizingmolecularoxygenwithanassistanceofpotenttransitionmetalcompounds.3…     

Synthesis,characterization, and biocide activity of new dithiocarbamate-based complexes of In(III), Ga(III), and Bi(III) – Part III

In this work, we describe the syntheses, characterization, and antifungal activity of [In{S₂CNR(R¹)}₃] (1), [Ga{S₂CNR(R¹)}₃] (2), [Bi{S₂CNR(R¹)}₃] (3), [In{S₂CNR(R²)}₃] (4), [Ga{S₂CNR(R²)}₃] (5), and [Bi{S₂CNR(R²)}₃] (6) {R?=?Me; R¹?=?CH₂CH(OMe)₂; and R²?=?2-methyl-1,3-dioxolane}. All complexes have been characterized using infrared and ¹H and ¹³C spectroscopy, and the structures of 1, 3, 4, and 6 have been authenticated by X-ray diffraction. The In(III)–dithiocarbamate bonding scheme depicts a distorted octahedral with asymmetric In(III)–S bonds and S–In–S angles. A pentagonal bipyramid is observed for the corresponding Bi(III) complexes with intermolecular Bi–S associations through the lone pair of electrons. The antifungal activities of 1–6 have been screened against Aspergillus niger, Aspergillus parasiticus, and Penicillium citrinum, and the results have been compared with those of nystatin and miconazole nitrate, as control drugs.