New N,N-amino-diphosphonate-containing methacrylic derivatives, their syntheses and radical copolymerizations with MMA

Hydroxy-amino-diphosphonates HO-C_n-NH₂, with 2 ? n ? 11, have been successfully synthesized via the Kabachnick-Field reaction at 70 °C with high yields. These hydroxy compounds are then reacted with methacryloyl chloride to lead to novel amino-diphosphonate methacrylates MAC_nNP₂ (with 2 ? n ? 11). These highly pure methacrylate monomers were obtained with yields higher than 75%. Radical copolymerizations of MAC_nNP₂ (with 2 ? n ? 11) with MMA have been conducted and the r₁ values (related to MAC_nNP₂) are in the range of 1.1-1.3, and r₂ values (related to MMA) about 0.8; this shows that the diphosphonate groups are statistically bonded to the methacrylic backbone.     

Synthesis, structure, and bridge-terminal alkyl exchange kinetics of pyrazolate-bridged dialuminum complexes containing bridging n-alkyl groups

Treatment of triethylaluminum with 3,5-diphenylpyrazole in a 2:1 stoichiometry afforded the ethyl-bridged complex Et₂Al(μ-Ph₂pz)(μ-Et)AlEt₂ (79%) as a colorless crystalline solid. Treatment of tri-n-propylaluminum with 3,5-di-tert-butylpyrazole in a 2:1 stoichiometry afforded the n-propyl-bridged complex (nPr)₂Al(μ-tBu₂pz)(μ-nPr)Al(nPr)₂ (63%) and the dimeric complex [(nPr)₂Al(μ-tBu₂pz)]₂ (3%), respectively, as colorless crystalline solids. Treatment of tri-n-propylaluminum (1 equiv.) or triisobutylaluminum (1 or 2 equiv.) with 3,5-di-tert-butylpyrazole afforded exclusively the dimeric complexes [(nPr)₂Al(μ-tBu₂pz)]₂ (68%) or [(iBu)₂Al(μ-tBu₂pz)]₂ (96%), respectively, as colorless crystalline solids. The solid state structures of Et₂Al(μ-Ph₂pz)(μ-Et)AlEt₂ and (nPr)₂Al(μ-tBu₂pz)(μ-nPr)Al(nPr)₂ consist of 3,5-disubstituted pyrazolato ligands with a di-n-alkylalumino group bonded to each nitrogen atom. An ethyl or n-propyl group acts as a bridge between the two aluminum atoms. The kinetics of the bridge-terminal exchange was determined for the bridging n-alkyl complexes by ¹³C NMR spectroscopy, and afforded ΔH^‡ = 1.5 ± 0.1 kcal/mol, ΔS^‡ = −46.8 ± 39.0 cal/K mol, and for Et₂Al(μ-Ph₂pz)(μ-Et)AlEt₂ and ΔH^‡ = 1.7 ± 0.1 kcal/mol, ΔS^‡ = −46.6 ± 43.4 cal/K mol, and for (nPr)₂Al(μ-tBu₂pz)(μ-nPr)Al(nPr)₂. The negative values of ΔS^‡ imply ordered transition states relative to the ground states, and rotation along the N-AlR₃ vector without aluminum-nitrogen bond cleavage is proposed.     

Vapour pressure and excess Gibbs free energy of binary mixtures of hydrogen sulphide with ethane, propane, and n-butane at temperature of 182.33 K

The vapour pressure of binary mixtures of hydrogen sulphide with ethane, propane, and n-butane was measured at T = 182.33 K covering most of the composition range. The excess Gibbs free energy of these mixtures has been derived from the measurements made. For the equimolar mixtures for (H₂S + C₂H₆), (820.1 ± 2.4) J · mol⁻¹ for (H₂S + C₃H₈), and (818.6 ± 0.9) J · mol⁻¹ for (H₂S + n-C₄H₁₀). The binary mixtures of H₂S with ethane and with propane exhibit azeotropes, but that with n-butane does not.     

Geometry and chemical bonding in polyhedral boranes, metallaboranes, and dimetallaboranes: From closo to isocloso to oblatocloso polyhedra

The geometry and chemical bonding in the closo metal-free boranes and the isoelectronic carboranes and C₂B_n−2H_n with 2n + 2 skeletal electrons are based on the most spherical deltahedra with a preference for degree 5 vertices, particularly for the boron atoms. Such deltahedral boranes can be considered to be three-dimensional aromatic systems, as indicated by strongly diatropic nucleus independent chemical shift values for (n = 6, 8, 9, 12). Metallaborane structures, particularly those with 9-11 vertices and only 2n rather than 2n + 2 apparent skeletal electrons, are often based on isocloso deltahedra with the metal atom at a degree 6 vertex. Dimetallaborane structures, particularly the rhenium derivatives Cp₂Re₂B_n−2H_n−2 (8 ? n ? 12), are based on highly non-spherical and very oblate deltahedra with the metal atoms typically at degree 6 or 7 vertices, which are the lowest curvature sites of the deltahedra. A viable model for the skeletal bonding in such dimetallaboranes can be developed if each of the two metal vertices is assumed to contribute five internal orbitals to the skeletal bonding. This leads to 2n + 4 skeletal electrons, which are partitioned into n surface bonds and a formal metal-metal double bond inside the oblate deltahedron.     

Are closed clusters expected from the (n + 1) skeletal electron pairs rule in alanes and gallanes? A DFT structural study of AnHn + 2 (A = Al, Ga, and n = 4-6)

It has been suggested recently that the alanes Al_nH_n + 2 can be treated by the polyhedral skeletal electron pair theory (PSEPT) of Wade and Mingos (W-M) as it was successful for their borane congeners such as B_nH_n + 2, well known as the deprotonated B_nH_n²⁻. To do so, the neutral Al_nH_n + 2 have been considered as Al_nH_n²⁻ + 2H⁺. The additional hydrogens donate their electrons to the Al_nH_n polyhedral framework and according to the n + 1 electron pairs rule; these clusters should have closo-polyhedral structures. In this work the homologous gallanes, the structures and stabilities of Ga_nH_n + 2 are studied at high levels of calculational theory and we investigated the applicability of the W-M rule to the alanes and gallanes A_nH_n + 2 (n = 4-6; A = Al, Ga). It will be shown that the presence of bridging hydrogen atoms reduces the compactness of the corresponding polyhedron and so these species do not have the closed structures. The computations were performed at B3LYP/6-311+G(d,p), BPW91/6-311G(d,p) and B3LYP/6-311+G(3df,2p) levels of theory. Our interest in these compounds includes their potential use as hydrogen storage species and future clean sources of energy.     

Synthesis, characterization and intercalation property of layered zirconium benzylamino-N,N-dimethylphosphonate phosphate materials

Layered zirconium benzylamino-N,N-dimethylphosphonate phosphate (ZBMPA) was prepared by the reaction of zirconyl chloride with benzylamino-N,N-dimethylphosphonic acid (H₂BMPA) and phosphoric acid in the presence of hydrofluoric acid. The intercalation of n-alkylamines (n-butylamine, n-heptylamine and n-decylamine) into ZBMPA was primarily investigated at room temperature. These materials were characterized by elemental analysis, ICP, XRD, SEM, FT-IR, Raman spectra, TG and DSC. The composition of ZBMPA is Zr(HPO₄)(C₆H₅CH₂N(CH₂PO₃)₂)_0.5 · 2.0H₂O. The interlayer distance of ZBMPA, n-butylamine, n-heptylamine and n-decylamine intercalation compounds is 2.03, 2.58, 2.52 and 3.17 nm, respectively. ZBMPA and the n-alkylamine intercalation compounds are different in the morphology and vibration spectra. Thermogravimetries of all materials obtained reveal three step mass losses at temperatures of up to 1000 °C. These results indicate that n-alkylamines are intercalated into the galleries of host ZBMPA.     

Synthesis and structural characterization of silver(I) complexes with moon-shaped benzo[1,2-b;4,3-b′]dithiophene phosphine derivative ligands

New silver complexes of general formula [Ag(O₃SCF₃)(PPh₂{bzt})_n] (n = 1–3, bzt = benzo[1,2-b;4,3-b′]dithiophene) have been synthesized and characterized. Spectroscopic studies shown neutral ligand fluxionallity, typical of silver(I) complexes. The solid state structure of the complexes was determined by X-ray crystallographic studies, showing a decrease in structure complexity with increasing number of neutral ligands in silver coordination sphere: [Ag(O₃SCF₃)(PPh₂{bzt})] is a dimer with two bridging triflate anions, further linked into polymeric bidimensional chains along bc plane, through Ag?Ph close contacts; Ag(O₃SCF₃)(PPh₂{bzt})₂] is also a dimmer with two bridging triflate anions, displaying an interesting packing feature, with zig-zag alignment of bzt groups along direction b; [Ag(O₃SCF₃)(PPh₂{bzt})₃] is a monomer.     

Interaction of polyhedral boron hydride anions [B10H10] and [B12H12] with cyclic copper and silver 3,5-bis(trifluoromethyl)pyrazolate complexes

The interactions of cyclic trinuclear copper {[3,5-(CF₃)₂Pz]Cu}₃ and silver {[3,5-(CF₃)₂Pz]Ag}₃ complexes with polyhedral borate anions [B₁₀H₁₀]²⁻ and [B₁₂H₁₂]²⁻ in solvents of low-polarity were studied using IR spectroscopy (190-290 K). Two types of complexes were found in solution: {[((3,5-CF₃)₂PzM)₃][B_nH_n]}²⁻ and {[((3,5-CF₃)₂PzM)₃]₂[B_nH_n]}²⁻ (M = Ag, Cu; n = 10, 12). The stability constants of these complexes were determined from IR-spectra.     

Complex formation equilibria between Ag(I) and thioureas in n-propanol

Complex formation equilibria between Ag(I) and thiourea or N-alkyl-substituted thioureas have been investigated in n-propanol by potentiometry at 10 °C intervals from 5 to 50 °C. Stepwise formation of tris-coordinated AgL_n (n = 1-3) complexes has been found for the majority of the ligands. ΔH and ΔS values for the complex formation reactions have been evaluated from the dependence of ln β_n on temperature. The alkyl-substituents affect the ligand affinities in different ways in relation with the coordination level n.The reactions are exothermic with few exceptions. Enthalpy favoured complex formation with negative dependence of ΔG on temperature (ΔS > 0) have been found.The enthalpy and entropy changes for the stepwise complex formation equilibria are correlated by two linear compensative relationships with the same isoequilibrium temperature 50-51 °C.     

New effective reagent [Cp2ZrH2 · ClAlEt2]2 for alkene hydrometallation

New bimetallic complex [Cp₂ZrH₂ · ClAlEt₂]₂ (1) was synthesized, and its reactivity in hydrometallation reaction with the following alkenes was studied: hept-1-ene, okt-1-ene, α-methylstyrene, (1S)-β-pinene, (+)-camphene. Complex 1 shows the highest reactivity among the other known Al,Zr-bimetallic complexes: [Cp₂ZrH₂ · ClAlBuⁱ₂]₂ (2), [Cp₂ZrH₂ · AlEt₃]₂ (3), [Cp₂ZrH₂ · AlBuⁱ₃]₂ (4) and [Cp₂ZrH₂ · HAlBuⁱ₂] (5) as well as organoaluminium compounds (OAC): ⁱBu₂AlH, ⁱBu₃Al and ⁱBu₂AlCl in presence of Zr catalysts. Chlorine containing complexes 1 and 2 appear to be more effective in alkene hydrometallation, and relative hydrometallation rates are (1S)-β-pinene ? (+)-camphene < α-methylstyrene < oct-1-ene < hept-1-ene. Hydrometallation of (1S)-β-pinene and its subsequent oxidation with I₂ run with high diastereoselectivity and yield trans-myrtanol. However, the diastereoselectivity of (+)-camphene hydrometallation is less than that for (1S)-β-pinene, and the reaction gives predominately endo-camphanol.     

Alkyl and dialkylammonium tetrafluoroborate catalyzed cis-trans isomerization of 1,3,5-trimethyl-1,3,5-triphenylcyclotrisiloxane

Alkyl and dialkylammonium tetrafluoroborate promoted cis-trans isomerization of 1,3,5-trimethyl-1,3,5-triphenylcyclotrisiloxane (1) in DMSO-d₆ were studied. The isomerization equilibrium constant K are within the range of 3.74-3.30 from 22 to 47 °C. Thermodynamic parameters of ΔH° and ΔS° for the isomerization were −0.95 kcal/mol and −0.59 cal/mol-K respectively. The isomerization rate is first order in [cis-1] and second order in [R_nNH_4−nBF₄]. Both components of R_nNH_4−n⁺ and BF₄⁻ are essential for the catalytic cis-trans isomerization. The catalytic strength follows the decreasing order of ⁺H₃N(CH₂)₆NH₃⁺>n-C₈H₁₇NH₃⁺>n-C₁₆H₃₃NH₃⁺>Me₃CNH₃⁺>PhCH₂NH₃⁺>Et₂NH₂⁺?Ph₂CHNH₃⁺, Et₃NH⁺. Inversion region was observed in the plot of ln(k_f/T) versus (1/T) with the ceiling located at around 38 °C. The positive activation enthalpy of 9 kcal/mol was estimated at 22-32 °C. The activation enthalpy turns to be slightly negative at T>38 °C.     

Synthesis,spectral characterization,electrochemical properties and antimicrobial screening of sulfur containing acylferrocenes

Several known and eight new sulfur containing acylferrocenes of the general formula FcCO(CH₂)_nSR (where Fc = ferrocenyl, n = 1 or 2 and R = alkyl, 4-bromobenzyl or 2,6-dichlorobenzyl group) were synthesized in order to test their in vitro antimicrobial activity against 11 bacterial and three fungal/yeast strains. It has been shown that only four of the 14 ketones are completely inactive at the tested dose, while the activities of the other ones were noteworthy. All new compounds were well characterized by IR and NMR spectral data, and their electrochemical properties were investigated by cyclic voltammetry. The X-ray crystal structures of two representative ketones are also presented.     

Dioxomolybdenum(VI) complexes containing N-heterocyclic carbenes

Compound MoO₂Cl₂(THF)₂ reacts with two equivalents of 1,3-dialkyl substituted 4,5-dimethylimidazol-2-ylidenes to give the dioxomolybdenum(VI) complexes MoO₂Cl₂(L^R)₂ [R = Me (1), i-Pr (2)]. Treatment of MoO₂Cl₂(THF)₂ with one equivalent of the N-heterocyclic carbenes L^Me, L^i-Pr and ^C1L^n-Bu (L^Me = 1,3,4,5-tetramethylimidazol-2-ylidene, L^i-Pr = 1,3-diisopropyl-4,5-dimethylimidazol-2-ylidene, and ^C1L^n-Bu = 1,3-dibutyl-4,5-dichloroimidazol-2-ylidene) affords the monocarbene adducts MoO₂Cl₂(L^R) [R = Me (3), i-Pr (4)] and MoO₂Cl₂(^C1L^n-Bu) (5), respectively. Decomposition of complexes 1-5 affords a molybdenum oxychloride anion [Mo₂O₅Cl₄]²⁻ as an imidazolium salt.     

Two-stage formation of chloro (N-o-chlorobenzamido-meso-tetraphenylporphyrinato) zinc(II) methylene chloride solvate: Zn(N-NHCO(o-Cl)C6H4-tpp)Cl · CH2Cl2

The coordinating properties of N-o-chlorobenzamido-meso-tetraphenylporphyrin (N-NHCO(o-Cl)C₆H₄-Htpp; 11) have been investigated for the Zn²⁺ ion. Insertion of Zn results in the formation of the zinc complex Zn(N-NCO(o-Cl)C₆H₄-tpp)(MeOH) · MeOH (12 · MeOH). The diamagnetic 12 · MeOH can be transformed into the diamagnetic Zn(N-NHCO(o-Cl)C₆H₄-tpp)Cl · CH₂Cl₂ (13 · CH₂Cl₂) in a reaction with aqueous hydrogen chloride (2%). X-ray structures for 12 · MeOH and 13 · CH₂Cl₂ have been determined. The coordination sphere around the Zn²⁺ ion in 12 · MeOH is a distorted trigonal bipyramid with N(2), N(4) and O(2) lying in the equatorial plane, whereas for the Zn²⁺ ion in 13 · CH₂Cl₂, it is a square-based pyramid in which the apical site is occupied by the Cl(1) atom.     

Investigation of the chromatographic behaviour of some selenium species—Comparison with their octanol-water partitioning

The retention behaviour of selenites (Se(IV)), selenates (Se(VI)), seleno-dl-methionine (Se-Met), selenocystine (Se-Cyst), selenocystamine (Se-CM) and selenourea (Se-U) was investigated using a Discovery end-capped reversed-phase column as stationary phase and different mobile phase conditions. Extrapolated to 100% aqueous mobile phase retention factors (log k_w) of the investigated Se species, determined using different methanol fractions (φ) as organic modifier, were compared with the corresponding actual values. The proper operation of this column even at 100% aqueous phase proved to be valuable for the accurate determination of log k_w values of Se-CM and Se-Cyst, presenting a convex curvature log k = f(φ) at low MeOH fractions, often neglected in the extrapolation procedure. The effect of the presence of n-decylamine as well as saturation of the mobile phase with n-octanol was also studied. For ampholytic Se-Met and Se-Cyst the effect of n-decylamine in retention reflected the predominance of zwitterionic nature in the case of Se-Met in contrary to the non-zwitterionic species found in the case of Se-Cyst, in accordance with our previous findings concerning partitioning experiments in the n-octanol/water system. Finally, an attempt was made to correlate log k_w values with the logarithm of n-octanol/water distribution coefficient, log D, of the investigated Se species and an indicative log D value of Se-U was derived.     

Cl/Cl isotope effects in Rh NMR of [RhCln(H2O)6−n] complex anions in hydrochloric acid solution as a unique ‘NMR finger-print’ for unambiguous speciation

A detailed analysis of the ³⁵Cl/³⁷Cl isotope effects observed in the 19.11 MHz ¹⁰³Rh NMR resonances of [RhCl_n(H₂O)_6−n]³⁻ⁿ complexes (n = 3–6) in acidic solution at 292.1 K, shows that the ‘fine structure’ of each ¹⁰³Rh resonance can be understood in terms of the unique isotopologue and in certain instances the isotopomer distribution in each complex. These ³⁵Cl/³⁷Cl isotope effects in the ¹⁰³Rh NMR resonance of the [Rh^35/37Cl₆]³⁻ species manifest only as a result of the statistically expected ³⁵Cl/³⁷Cl isotopologues, whereas for the aquated species such as for example [Rh^35/37Cl₅(H₂O)]²⁻, cis-[Rh^35/37Cl₄(H₂O)₂]⁻ as well as the mer-[Rh^35/37Cl₃(H₂O)₃] complexes, additional fine-structure due to the various possible isotopomers within each class of isotopologues, is visible. Of interest is the possibility of the direct identification of stereoisomers cis-[RhCl₄(H₂O)₂]⁻, trans-[RhCl₄(H₂O)₂]⁻, fac-[RhCl₃(H₂O)₃] and mer-[RhCl₃(H₂O)₃] based on the ¹⁰³Rh NMR line shape, other than on the basis of their very similar δ(¹⁰³Rh) chemical shift. The ¹⁰³Rh NMR resonance structure thus serves as a novel and unique ‘NMR-fingerprint’ leading to the unambiguous assignment of [RhCl_n(H₂O)_6−n]³⁻ⁿ complexes (n = 3–6), without reliance on accurate δ(¹⁰³Rh) chemical shifts.     

Thermodynamic study of the n-octane-1-pentanol-sodium dodecyl sulfate solutions in water

The thermodynamic properties, PVTx (T_S, P_S, ρ_S), (∂P/∂T)_VX, and C_VVTx, of three microemulsions (water + n-octane + sodium dodecylsulfate + 1-pentanol) with composition of solution-1: 0.0777 (H₂O):0.6997 (n-C₈H₁₈):0.0777 (SDS):0.1449 (1-C₅H₁₁OH) mass fraction; solution-2: 0.6220 (H₂O):0.1555 (n-C₈H₁₈):0.0777 (SDS):0.1448 (1-C₅H₁₁OH) mass fraction; and solution-3: 0.2720 (H₂O):0.5054 (n-C₈H₁₈):0.0777 (SDS):0.1449 (1-C₅H₁₁OH) mass fraction were measured. Sodium dodecylsulfate (SDS) was used as an ionic surfactant, 1-pentanol used as stabilizer (cosurfactant), and n-octane as oil component in aqueous solution. A high-temperature, high-pressure, adiabatic, and nearly constant-volume calorimeter supplemented by quasi-static thermogram technique was used for the measurements. Measurements were made at eight densities (isochores) between 475.87 and 919.03 kg m⁻³. The range of temperature was from 275 to 536 K and pressure range was up to 138 bar. Uncertainty of the pressure, density, derivative (∂P/∂T)_VX, and heat capacity measurements are estimated to be 0.25%, 0.02%, 0.12-1.5%, and 2.5%, respectively. Temperatures at liquid-gas phase transition curve, T_S(ρ), for each measured densities (isochores) were determined using a quasi-static thermogram technique. The uncertainty of the phase transition temperature measurements is about ±0.02 K. The effect of temperature, density, and concentration on the heat capacity of the microemulsions is discussed. Along the isochore of 438.40 kg m⁻³ at temperatures above 525.44 K for the first solution the precipitation of the solid phase (SDS) was found.     

Separation and quantification of [RhCln(H2O)6−n] (n = 0-6) complexes, including stereoisomers, by means of ion-pair HPLC-ICP-MS

A hyphenated ion-pair (tetrabutylammonium chloride—TBACl) reversed phase (C₁₈) HPLC-ICP-MS method (High Performance Liquid Chromatography Inductively Coupled Plasma Mass Spectroscopy) for anionic Rh(III) aqua chlorido-complexes present in an HCl matrix has been developed. Under optimum chromatographic conditions it was possible to separate and quantify cationic Rh(III) complexes (eluted as a single band), [RhCl₃(H₂O)₃], cis-[RhCl₄(H₂O)₂]⁻, trans-[RhCl₄(H₂O)₂]⁻ and [RhCl_n(H₂O)_6−n]³⁻ⁿ (n = 5, 6) species. The [RhCl_n(H₂O)_6−n]³⁻ⁿ (n = 5, 6) complex anions eluted as a single band due to the relatively fast aquation of [RhCl₆]³⁻ in a 0.1 mol L⁻¹ TBACl ionic strength mobile phase matrix. Moreover, the calculated t_1/2 of 1.3 min for [RhCl₆]³⁻ aquation at 0.1 mol kg⁻¹ HCl ionic strength is significantly lower than the reported t_1/2 of 6.3 min at 4.0 mol kg⁻¹ HClO₄ ionic strength. Ionic strength or the activity of water in this context is a key parameter that determines whether [RhCl_n(H₂O)_6−n]³⁻ⁿ (n = 5, 6) species can be chromatographically separated. In addition, aquation/anation rate constants were determined for [RhCl_n(H₂O)_6−n]³⁻ⁿ (n = 3-6) complexes at low ionic strength (0.1 mol kg⁻¹ HCl) by means of spectrophotometry and independently with the developed ion-pair HPLC-ICP-MS technique for species assignment validation. The Rh(III) samples that was equilibrated in differing HCl concentrations for 2.8 years at 298 K was analyzed with the ion-pair HPLC method. This analysis yielded a partial Rh(III) aqua chlorido-complex species distribution diagram as a function of HCl concentration. For the first time the distribution of the cis- and trans-[RhCl₄(H₂O)₂]⁻ stereoisomers have been obtained. Furthermore, it was found that relatively large amounts of ‘highly’ aquated [RhCl_n(H₂O)_6−n]³⁻ⁿ (n = 0-4) species persist in up to 2.8 mol L⁻¹ HCl and in 1.0 mol L⁻¹ HCl the abundance of the [RhCl₅(H₂O)]²⁻ species is only 8-10% of the total, far from the 70-80% as previously proposed. A 95% abundance of the [RhCl₆]³⁻ complex anion occurs only when the HCl concentration is above 6 mol L⁻¹. The detection limit for a Rh(III) species eluted from the column is below 0.147 mg L⁻¹.     

A computational study of SbnF5n (n = 1-4): Implications for the fluoride ion affinity of nSbF5

This contributions shows with a series of ab initio MP2 and DFT (BP86 and B3-LYP) computations with large basis sets up to cc-pVQZ quality that the literature value of the standard enthalpy of depolymerization of Sb₄F_20(g) to give SbF_5(g) (+18.5 kJ mol⁻¹) [J. Fawcett, J.H. Holloway, R.D. Peacock, D.R. Russell, J. Fluorine Chem. 20 (1982) 9] is by about 50 kJ mol⁻¹ in error and that the correct value of (Sb₄F_20(g)) is +68 ± 10 kJ mol⁻¹. We assign , , and values for Sb_nF_5n with n = 2-4 and compare the results to available experimental gas phase data. Especially the MP2/TZVPP values obtained in an indirect procedure that rely on isodesmic reactions or the highly accurate compound methods G2 and CBS-Q are in excellent agreement with the experimental data, and reproduce also the fine experimental details at temperatures of 423 and 498 K. With these data and the additional calculation of [Sb_nF_5n+1]⁻ (n = 1-4), we then assessed the fluoride ion affinities (FIAs) of Sb_nF_5n(g), nSbF_5(g), nSbF_5(l) and the standard enthalpies of formation of Sb_nF_5n(g) and [Sb_nF_5n+1]⁻_(g): FIA(Sb_nF_5n(g)) = 514 (n = 1), 559 (n = 2), 572 (n = 3) and 580 (n = 4) kJ mol⁻¹; FIA(nSbF_5(g)) = 667 (n = 2), 767 (n = 3) and 855 (n = 4) kJ mol⁻¹; FIA(nSbF_5(l)) = 434 (n = 1), 506 (n = 2), 528 (n = 3) and 534 (n = 4) kJ mol⁻¹. Error bars are approximately ±10 kJ mol⁻¹. Also the related Gibbs energies were derived. Δ_fH°([Sb_nF_5n+1]⁻_(g)) = −2064 ± 18 (n = 1), −3516 ± 25 (n = 2), −4919 ± 31 (n = 3) and −6305 ± 36 (n = 4) kJ mol⁻¹.     

Formation of γ-Fe2O3 nanoparticles and vacancy ordering: An in situ X-ray powder diffraction study

The formation of maghemite, γ-Fe₂O₃ nanoparticles has been studied by in situ X-ray powder diffraction. The maghemite was formed by thermal decomposition of an amorphous precursor compound made by reacting lauric acid, CH₃(CH₂)₁₀COOH with Fe(NO₃)₃·9H₂O. It has been shown that cubic γ-Fe₂O₃ was formed directly from the amorphous precursor and that vacancy ordering starts about 45 min later at 305 °C resulting in a tripled unit cell along the c-axis. The kinetics of grain growth was found to obey a power law with growth exponents n equal to 0.136(6) and 0.103(5) at 305 and 340 °C, respectively. Particles with average sizes of 12 and 13 nm were obtained in 86 and 76 min at 305 and 340 °C, respectively. The structure of cubic and vacancy ordered phases of γ-Fe₂O₃ was studied at 305 °C by Rietveld refinements.