Are novel aryl phosphates competitors for bisphenol A bis(diphenyl phosphate) in halogen-free flame-retarded polycarbonate/acrylonitrile–butadiene–styrene blends?

The reactivity of the flame retardant and its decomposition temperature control the condensed-phase action in bisphenol A polycarbonate/acrylonitrile–butadiene–styrene/polytetrafluoroethylene (PC/ABS_PTFE) blends. Thus, to increase charring in the condensed phase of PC/ABS_PTFE + aryl phosphate, two halogen-free flame retardants were synthesized: 3,3,5-trimethylcyclohexylbisphenol bis(diphenyl phosphate) (TMC-BDP) and bisphenol A bis(diethyl phosphate) (BEP). Their performance is compared to bisphenol A bis(diphenyl phosphate) (BDP) in PC/ABS_PTFE blend. The comprehensive study was carried out using thermogravimetry (TG); TG coupled with Fourier transform infrared spectrometer (TG-FTIR); the Underwriters Laboratory burning chamber (UL 94); limiting oxygen index (LOI); cone calorimeter at different irradiations; tensile, bending and heat distortion temperature tests; as well as rheological studies and differential scanning calorimeter (DSC). With respect to pyrolysis, TMC-BDP works as well as BDP in the PC/ABS_PTFE blend by enhancing the cross-linking of PC, whereas BEP shows worse performance because it prefers cross-linking with itself rather than with PC. As to its fire behavior, PC/ABS_PTFE + TMC-BDP presents results very similar to PC/ABS_PTFE + BDP; the blend PC/ABS_PTFE + BEP shows lower flame inhibition and higher total heat evolved (THE). The UL 94 for the materials with TMC-BDP and BDP improved from HB to V0 for specimens of 3.2 mm thickness compared to PC/ABS_PTFE and PC/ABS_PTFE + BEP; the LOI increased from around 24% up to around 28%, respectively. BEP works as the strongest plasticizer in PC/ABS_PTFE, whereas the blends with TMC-BDP and BDP present the same rheological properties. PC/ABS_PTFE + TMC-BDP exhibits the best mechanical properties among all flame-retarded blends.     

Fire retardant synergism between melamine and triphenyl phosphate in poly(butylene terephthalate)

The fire retardant efficiency of melamine (MA) and triphenyl phosphate (TPP) in poly(butylene terephthalate) (PBT) was studied by the limiting oxygen index (LOI) and the UL94 test. On adding 10 wt. % MA and 20 wt. % TPP, LOI increased from 20.9 to 26.6 and the UL94 V-0 rating was achieved. SEM and DSC analyses show that the fire retardants are compatible with PBT and facilitate crystallization of PBT. The occurrence of an interaction between MA + TPP and PBT was elucidated by TGA, dynamic FTIR, and pyrolysis/GC/MS. MA + TPP changes the degradation path of PBT and modifies the compositions of the gas and condensed-phase products.     

Fire retardancy mechanisms of arylphosphates in polycarbonate (PC) and PC/acrylonitrile-butadiene-styrene

The pyrolysis of polycarbonate (PC) and PC/acrylonitrile-butadiene-styrene (PC/ABS) with and without arylphosphates (triphenylphosphate TPP, resorcinol-bis(diphenyl phosphate) RDP and bisphenol A bis(diphenyl phosphate) BDP) is investigated by thermal analysis as key to understanding the flame retardancy mechanisms and corresponding structure–property relationships. The correspondence between the decomposition temperature range of arylphosphates and PC is pointed out as prerequisite for the occurrence of the reaction between arylphosphate and structures that are typical for the beginning of PC decomposition. Resulting cross-linking enhances charring in the condensed phase and competes with the alternative release of phosphate in the gas phase and thus flame inhibition. Flame inhibition was identified as the main flame retardancy mechanism. The additional condensed phase mechanisms optimise the performance.     

Study on flame-retardant mechanism of polycarbonate containing sulfonate-silsesquioxane-fluoro retardants by TGA and FTIR

The flame retardancy of bisphenol A polycarbonate (PC) containing potassium diphenylsulfone sulfonate (KSS), poly(aminopropyl/phenylsilsesquioxane) (PAPSQ) and poly(vinylidenefluoride) (PVDF) was measured by limited oxygen index (LOI) and examined according to UL94. A high LOI and UL94 V-0 rating for 1.6 mm thickness samples were obtained by a combined use of equivalent KSS, PAPSQ and PVDF at 0.1-0.3 wt% loading, respectively. The improvement in flame retardancy of PC compositions arose from the synergistic interaction of three additives. Thermogravimetric analysis (TGA) indicated that the combination decreased the activation energy (E) of PC degradation and elevated the thermal degradation rate of PC to ensure the formation of an insulating carbon layer. FTIR analysis showed that the LOI char of PC containing the three additives took on a highly cross-linking aromatic ester and ether structure.     

The effect of different impact modifiers in halogen-free flame retarded polycarbonate blends - II. Fire behaviour

In this second of a series of two papers, the fire behaviour of halogen-free flame retarded polycarbonate (PC) blends with different impact modifiers was studied. The impact modifiers were acrylonitrile-butadiene-styrene (ABS), a poly(n-butyl acrylate) rubber (PBA) with a poly(methyl methacrylate) (PMMA) shell and two silicone-acrylate rubbers consisting of PBA with different amounts of polydimethylsiloxane (PDMS) and different shell materials (PMMA and styrene-acrylonitrile, SAN). The flame retardant was bisphenol A bis(diphenyl phosphate) (BDP). Flammability was determined by LOI and UL 94. The burning behaviour under forced flaming conditions was studied by cone calorimeter under different external irradiations and by pyrolysis combustion flow calorimeter measurements. The exchange of ABS with the pure acrylate rubber worsened flammability, while similar results were obtained in cone calorimeter measurements. The exchange of ABS with the silicone-acrylate rubbers is promising, particularly with higher amounts of PDMS. In flammability tests strongly enhanced LOI values were obtained and therefore silicone-acrylate rubbers look like promising alternatives for ABS.     

The impact of resorcinol bis(diphenyl phosphate) and poly(phenylene ether) on flame retardancy of PC/PBT blends

Flame retardancy of bisphenol A polycarbonate (PC)/poly(butylene terephthalate) (PBT) blends was improved by the addition of resorcinol bis(diphenyl phosphate) (RDP) and poly(phenylene ether) (PPO). A PC/PBT blend at 70/30 weight ratio obtained a V‐0 rating by the addition of 10 wt% RDP and 10 wt% PPO. The combination of 5 wt% methyl methacrylate‐butadiene‐styrene tercopolymer (MBS) with 3 wt% ethylene‐butylacrylate‐glycidyl methacrylate tercopolymer (PTW) causes a remarkable increase in toughness of the PC/PBT/RDP blend while maintaining a high rigidity. A detailed investigation of the flame‐retardant action of PC/PBT/RDP and PC/PBT/RDP/PPO blends was performed using thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), TGA‐FTIR, temperature‐programmed pyrolysis/gas chromatography/mass spectrometry (TPPy/GC/MS), and scanning electron microscopy/energy dispersive spectrometer (SEM/EDS). The results demonstrate that RDP induces a higher char yield at ca. 450 °C and synchronously increases the thermal stability of the blend with PPO. The flame‐retardant role of RDP in the condensed phase was discerned from TGA, FTIR, and SEM/EDS of the residues. Copyright © 2010 John Wiley & Sons, Ltd.     

含季戊四醇磷酸酯阻燃剂的合成与表征

采用1-氧代-4-羟甲基-2,6,7-三氧杂-1-磷杂双环[2.2.2]辛烷(PEPA)、三氯氧磷、双酚A和双酚S为反应物,合成了两个新型添加型阻燃剂:双酚A双[二(1-氧代-1-磷杂-2,6,7-三氧杂双环辛烷-4-亚甲基)]磷酸酯(BAPP)和双酚S双[二(1-氧代-1-磷杂-2,6,7-三氧杂双环辛烷-4-亚甲基)]磷酸酯(BSPP),通过元素分析、FT-IR和1H NMR等表征了标题化合物的结构,结果表明,所合成的标题化合物的结构与预期一致。热失重分析结果证明,BAPP和BSPP质量损失5%(wt)时的温度分别为343.6℃和352.3℃,600℃残余量分别达46.6%和55.5%,具有较高的热稳定性和结炭性能。阻燃性能实验证明,E-51环氧树脂中分别添加质量分数为18.2%(wt)的BAPP和BSPP时,极限氧指数分别为32.2%和31.8%,均能达到UL 94 V-0级。     

Flame-retarded mechanism of SEBS/PPO composites modified with mica and resorcinol bis(diphenyl phosphate)

The flame retardancy of styrene-b-ethylene/butylene-b-styrene triblock polymer (SEBS)/poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) blends was greatly improved by the combined use of mica and resorcinol bis(diphenyl phosphate) (RDP). The limiting oxygen index (LOI), vertical burning and cone calorimeter test were performed to evaluate the flame-retarded effect. The composite of SEBS/PPO/maleic anhydride grafted SEBS (SEBS-g-MAH) with a mass ratio of 11/11/3 passed a V-0 rating in the UL94 test by the addition of 10–15 wt% mica and 15–10 wt% RDP with total amount of 25 wt%. The synergism was confirmed by the mathematical evaluation of the synergistic effect index (SE) in LOI, the residue, the peak heat release rate (PHRR) and the total heat evolved (THE) per mass loss (THE/ML). The flame-retarded mechanism of the composite was also proposed on the results of cone calorimeter test, TGA-FTIR, SEM micrographs and SEM/EDS analysis of the residues. It was found that the degradation rate of SEBS/PPO/SEBS-g-MAH matrix was slowed down, a more consolidated char layer with higher residue was promoted by the combination of RDP and mica. The flame-retardancy of RDP with mica in SEBS/PPO/SEBS-g-MAH matrix was synergistic through gas and condensed phase action.     

Thermal behavior of poly(bisphenol A carbonate) in the presence of phosphorus compounds

To clarify the interaction between poly(bisphenol A carbonate) (PBAC) and phosphorus compounds such as triphenylphosphine oxide (TPPO), triphenyl phosphate (TPP), and resorcinol bis(diphenyl phosphate) (RDP), PBAC was heated in the presence of these phosphorus compounds at 240 °C for 2 h, and the resulting polymers were analyzed by ¹H NMR spectroscopy and gel permeation chromatography. When heated in the presence of TPPO, the PBAC sample decomposed extensively, resulting in a substantial decrease in molecular weight. On the other hand, thermal treatment in the presence of the phosphates increased the molecular weight. In both cases the molecular weight distribution became narrower. Thermal treatment of PBAC in the presence of both TPPO and TPP allowed us to control the molecular weight with a narrower distribution. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1069–1074, 2004     

Effect of temperature on the performance of proton batteries based on chitosan–NH4NO3–EC membrane

Membranes of chitosan-based proton conductor polymer electrolyte were prepared by dissolving chitosan powder, ammonium nitrate (NH₄NO₃) salt and ethylene carbonate (EC) plasticizer in acetic acid solution. The temperature dependence of the chitosan-based membrane system was found to obey the Arrhenius relationship. The sample with the highest conductance, 18 wt.% CA + 12 wt.% NH₄NO₃ + 70 wt.% EC (CA40N70E), also possesses the lowest activation energy. From linear sweep voltammetry (LSV) results, the membrane is electrochemically stable at a potential of 1.6–1.8 V and a temperature of 298–353 K. The cells were fabricated using zinc powder (Zn) + zinc sulfate heptahydrate (ZnSO₄·7H₂O) + acetylene black (AB) + polytetrafluoroethylene (PTFE)|CA40N70E|manganese (IV) oxide (MnO₂) + AB + PTFE. The open circuit voltages of the cells are decreases as temperature increases, the same trend as that obtained by LSV. The cell performance is excellent at 333 K, with discharge capacity of 42.7 mAh, internal resistance of 16.8 Ω, maximum power density of 14.6 mW cm⁻² and a short-circuit current density of 31.0 mA cm⁻². However, at temperatures above 333 K, decomposition of the membrane degraded the electrochemical properties of the cells.     

Thermal stability and flame retardancy of novel phloroglucinol based organo phosphorus compound

A series of organo phosphorus flame retardants (FR) based on cyclic phosphates were synthesized in an attempt to find an efficient FR for polycarbonate (PC) and acrylonitrile-butadiene-styrene copolymer (ABS). The success of synthesis was confirmed by FT-IR and ¹H and ³¹P NMR. Their thermal stability and flame-retarding efficiency as a single component additive were investigated and compared with those of aromatic based phosphate, resorcinol bis(diphenyl phosphate) (RDP). Thermogravimetric analysis (TGA) results reveal that cyclic phosphates synthesized in this study show more than one-step degradation and act in the condensed phase mechanism rather than in the vapor phase mechanism. Flame-retarding efficiency was evaluated by UL-94 test method. V-0 rating was achieved at 3-5 wt% of FR loading for PC, which is better than the FR performance of RDP. The high P-OH generation tendency is responsible for the better FR performances of these compounds. The degradation path is also discussed.     

磷酸酯阻燃剂HDP的合成工艺及其在ABS中的阻燃作用

采用新工艺路线合成高熔点磷酸酯阻燃剂———对苯二酚双(二苯基磷酸酯)(HDP).首先采用对苯二酚和三氯氧磷合成中间产物,再将中间产物与苯酚反应,经分离纯化得到产品HDP,收率达到90%以上,常温下为白色固体.采用傅里叶红外光谱、氢谱、磷谱和质谱测试确定了其结构.同时,研究了HDP的阻燃性,并与间苯二酚双(二苯基磷酸酯)(RDP)进行了比较,研究发现当HDP和RDP分别与成炭剂酚醛树脂(NP)按20/10比例添加到丙烯腈-丁二烯-苯乙烯(ABS)树脂中,增强了复合材料凝聚相阻燃作用,极限氧指数(LOI)有所提高.通过热重及锥形量热分析两种复合材料以及各种组分的热降解过程,阻燃剂的添加对ABS树脂的热稳定性和残炭量明显提高,而且ABS/HDP/NP复合材料的抑烟性更好;同时采用扫描电镜(SEM)和X射线能量色散谱(EDS),发现ABS/HDP/NP复合材料燃烧后成炭空隙均匀,其残炭中磷分布比ABS/RDP/NP复合材料残炭中的磷分布更加均匀.研究表明,HDP与NP互配添加到ABS中,在凝聚相阻燃作用优于RDP.     

Flame retardancy mechanisms of poly(1,4‐butylene terephthalate) containing microencapsulated ammonium polyphosphate and melamine cyanurate

The flame retardancy mechanisms of poly(1,4‐butylene terephthalate) (PBT) containing microencapsulated ammonium polyphosphate (MAPP) and melamine cyanurate (MC) were investigated via pyrolysis analysis (thermogravimetric analysis (TGA), real‐time Fourier transform infrared (FTIR), TG‐IR), cone calorimeter test, combustion tests (limited oxygen index (LOI), UL‐94), and residue analysis (scanning electron microscopy (SEM)). A loading of 20 wt% MC to PBT gave the PBT composites an LOI of 26%, V‐2 classification in UL‐94 test and a high peak heat release rate (HRR) in cone calorimeter test. Adding APP to PBT/MC composites did not improve their flame retardancy. In comparison with the addition of ammonium polyphosphate (APP) to PBT, MAPP with silica gel shell and MAPP with polyurethane shell both promoted the intumescent char‐forming and improved the flame retardancy of PBT through different mechanisms in the presence of MC. These two halogen‐free PBT composites with V‐0 classification according to UL‐94 test were obtained; their LOI were 32 and 33%, respectively. Copyright © 2010 John Wiley & Sons, Ltd.     

Novel tetrapotassium azo diphosphonate (INAZO) as flame retardant for polyurethane adhesives

An inorganic azo diphosphonate (INAZO), (KO)₂(O)P-NN-P(O)(OK)₂·4H₂O, was synthesized and tested as a novel type of flame retardant additive for castor oil and oligomeric methylene diphenyl diisocyanate (PMDI) based two component polyurethane adhesive with or without using dolomite ((CaMg(CO₃)₂) as filler. Flammability according to UL 94 test and performance under forced-flaming conditions (cone calorimeter) were investigated at the additive loadings of 5, 10 and 20 wt %. It was shown that INAZO improves flame retardancy by significantly reducing heat release rate (HRR), maximum average rate of heat emission (MARHE) and total smoke release (TSR) values in comparison to CaMg(CO₃)₂ filled polyurethane adhesives. The macroscopic structure of the sample residues after cone calorimeter measurement was also analysed. The action mechanism of the developed INAZO flame retardant is suggested to be mainly in the condensed phase. UL 94 V-0 rating was achieved in the vertical burning test when 10 wt % loading of INAZO was used, whereas the reference flame retardant ammonium polyphosphate (APP) required a loading of 20 wt % to reach the V-0 classification.     

Flame retardancy and thermal degradation of intumescent flame retardant polypropylene with MP/TPMP

The performances of the novel intumescent flame retardant (IFR) polypropylene (PP) composites containing melamine phosphate (MP) and tris(1‐oxo‐2,6,7‐trioxa‐1‐phosphabicyclo[2,2,2]methylene‐4)phosphate (TPMP) were investigated. The flame retardancy of IFR‐PP system was characterized by limiting oxygen index (LOI) and UL 94 and cone calorimeter. The morphology of the char obtained after cone calorimeter testing was studied by scanning electron microscopy (SEM). The thermal oxidative degradation (TOD) of the composites was investigated by using thermogravimetric analysis (TGA) and real‐time Fourier transform infrared spectroscopy (RT‐FTIR). Compared with the PP/ TPMP or PP/ MP binary composite, at the same addition level, the LOI values of the PP/MP/TPMP ternary composites increase and reach V‐0 at the suitable MP/TPMP ratio. The results of TGA and RT‐FTIR showed the existence of the interaction between IFR and PP. Copyright © 2008 John Wiley & Sons, Ltd.     

Preparation and flammability of a novel intumescent flame-retardant poly(ethylene-co-vinyl acetate) system

A phosphorus-containing flame retardant, 4-(5,5-dimethyl-2-oxo-1,3,2-dioxaphosphorinan-2-yloxymethyl)-2,6,7-trioxa-1-phospha-bicyclo[2.2.2]octane-1-oxide (MOPO), was synthesized successfully and characterized. The flame retardancy and thermal behavior of a new intumescent flame-retardant (IFR) system for EVA, which was made of MOPO and ammonium polyphosphate (APP), were investigated by limiting oxygen index (LOI) test, vertical burning test (UL-94), cone calorimeter, and thermogravimetric analysis (TGA). An LOI value of 28.4 and UL-94 V-0 rating can be achieved when the total loading of MOPO and APP was 30 wt.%. The results from cone calorimeter indicate that both the heat release rate (HRR) and the total heat release (THR) of IFR-EVA decreased significantly compared with those of neat EVA. TG curves showed that the amount of residues increased significantly when intumescent additives were added; it also could be found that the LOI values increased with the increase in char residues. Meanwhile, morphology of the residues obtained from burning IFR-EVA in LOI test was studied through the SEM observations and rich compact char layers could explain the excellent flame retardance.     

双酚A双(二苯基)磷酸酯对环氧树脂的阻燃性能

采用双酚A双(二苯基)磷酸酯(BDP)、有机改性蒙脱土(OMMT)和环氧树脂(EP),分别制备了阻燃环氧树脂(BDP-EP)和阻燃纳米材料(BDP-OMMT-EP).利用氧指数、水平垂直燃烧、热重分析以及锥形量热等技术探讨了阻燃材料的阻燃性能和阻燃机理.实验结果证明,BDP-EP和BDP-OMMT-EP的最大热释放速率和平均热释放速率等参数都降低了,但是BDP的阻燃效果优于BDP-OMMT,即BDP和OMMT没有协同阻燃作用.     

Aluminum hypophosphite in combination with expandable graphite as a novel flame retardant system for rigid polyurethane foams

The main aim of this work was to investigate the synergistic effect of expandable graphite (EG) and aluminum hypophosphite (AHP) on the flame retardancy of rigid polyurethane foams (RPUFs). A series of flame retardant RPUF containing EG and AHP were prepared by one‐shot and free‐rise method. The flame retardant, thermal degradation, and combustion properties of RPUF hybrids were characterized through limiting oxygen index (LOI) test, vertical burning (UL‐94) test, thermogravimetric analysis and microscale combustion calorimeter. The LOI and UL‐94 results showed that the RPUF sample with 10 wt% EG and 5 wt% AHP passed UL‐94 V‐0 rating and reached a relatively high LOI value of 28.5%, which is superior over other EG/AHP ratios in RPUF at the equivalent filler loading. Microscale combustion calorimeter results revealed that the incorporation of EG and AHP into RPUF reduced the peak heat release rate and total heat release, thus decrease the fire risk of RPUF significantly. Incorporation of EG and AHP improved the thermal stability of RPUF as observed from the thermogravimetric analysis results and also enhanced the thermal resistance of char layer at high temperature from scanning electron microscopy and Raman spectroscopy. Moreover, it could be seen from thermogravimetric analysis/infrared spectrometry spectra that the addition of EG and AHP significantly decreased the combustible gaseous products such as hydrocarbons and ethers. Finally, the synergistic mechanism in flame retardancy was discussed and speculated. Copyright © 2014 John Wiley & Sons, Ltd.     

Flame retardancy and thermal properties of solid bisphenol A bis(diphenyl phosphate) combined with montmorillonite in polycarbonate

A series of flame retardant formulations of solid bisphenol A bis(diphenyl phosphate) (S-BDP) and organo-montmorillonite (OMMT) were prepared based on polycarbonate (PC) by a melt compounding procedure. OMMT was well dispersed into the matrix showing an intercalated-exfoliated morphology. S-BDP and OMMT exhibit a synergistic effect in the vertical burning test (UL-94) but an antagonistic effect in the limiting oxygen index (LOI) evaluation. Thermogravimetric analysis (TGA) of the flame retarded PC system both under nitrogen and air was performed. Migration of S-BDP and OMMT towards the surface occurs during combustion. The introduction of OMMT could especially enhance the thermal-oxidative stability of the material, which is further confirmed by the analysis of the char residues by scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS).     

A novel efficient halogen-free flame retardant system for polycarbonate

A novel silicon- and phosphorus-containing flame retardant, poly (9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide siloxane), P(DOPO-VTES) was synthesized from 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide(DOPO) and vinyltriethoxy silane(VTES). Its chemical structure was confirmed by FTIR. The thermal gravimetrical analysis (TGA) showed that P(DOPO-VTES) had good thermal stability and a high of char yield (86.31%) at 700 °C in nitrogen atmosphere. Its XRD patterns showed that this compound had a certain ordered structure. P(DOPO-VTES) was blended with polycarbonate (PC) together with montmorillonite(MMT) to prepare a series of organic-inorganic hybrids of flame retardant (PC)/P(DOPO-VTES)/MMT via melt blending. The thermal degradation behavior and flame retardancy of those hybrids were investigated with TGA, limiting oxygen index (LOI), vertical burning test (UL-94), and cone calorimeter. The LOI value of the flame-retardant PC systems could reach a maximal value of 32.8 when the content of P(DOPO-VTES) was 5 wt%. When 2 wt% MMT was added into the PC/5%P(DOPO-VTES) system, the UL-94 rating reached V-0. The possible flame retardant mode of MMT was studied via the dynamic rheological properties of the systems and the morphology of the chars remaining after the LOI test and the cone calorimeter test.