Supramolecular hydrogels induced rapidly by inclusion complexation of poly(epsilon-caprolactone)-poly(ethylene glycol)-poly(epsilon-caprolactone) block copolymers with alpha-cyclodextrin in aqueous solutions

On the basis of the synthesis of water-soluble poly(epsilon-caprolactone)-poly(ethylene glycol)-poly(epsilon-caprolactone) (PCL-PEG-PCL) block copolymers, the supramolecular hydrogels were fabricated rapidly in aqueous solutions by their inclusion complexation with alpha-cyclodextrin. X-ray diffraction (XRD) analyses confirmed the supramolecular self-assemblies of alpha-cyclodextrin threaded onto amphiphilic PCL-PEG-PCL block copolymers. The resulting hydrogels display a high degree of elasticity, with the storage modulus (G') greater than the loss modulus (G') over the entire range of frequency. Moreover, their viscosity greatly diminished as they were sheared. By controlling the molecular weight of the PEG component in the block copolymers and the content of the block copolymer, their rheological properties could be modulated. Such hydrogel materials have the potential to be used as tissue engineered scaffolds, biosensors in the human body, and carriers for controlled drug delivery.     

Macroporous Poly(Acrylamide) Hydrogels: Swelling and Shrinking Behaviors

Macroporous poly(acrylamide) hydrogels have been synthesized by using poly(ethylene glycol) (PEG) with three different molecular weights as the pore‐forming agent. Scanning electron microscope graphs reveal that the macroporous network structure of the hydrogels can be adjusted by applying different molecular weights of PEG during the polymerization reaction. The swelling ratios of the PEG‐modified hydrogels were much higher than those for the same type of hydrogel prepared via conventional method. However, the swelling/deswelling ratios of the PEG‐modified hydrogels were affected slightly by the change in the amount of the PEG. Scanning electron microscopy experiments, together with swelling ratio studies, reveal that the PEG‐modified hydrogels are characterized by an open structure with more pores and higher swelling ratio, but lower mechanical strength, compared the conventional hydrogel. PAAm has potential applications in controlled release of macromolecular active agents.     

Mussel-inspired chemistry in producing mechanically robust and bioactive hydrogels as skin dressings

The development of hydrogels as skin dressings demonstrates a great potential in real life applications. To achieve this, the hydrogel has to conquer its natural poor mechanical strength, and to prolong its lifetime, antifatigue and self-healing properties originating from dynamic interactions are also required. As skin dressings, the hydrogel needs to maintain its ductility while pursuing the above mentioned properties. In this work, poly(ethylene glycol) diacrylate is used to produce skin dressings by reinforcing poly(ethylene glycol) diacrylate/alginate double network hydrogels with a crosslinker from mussel-inspired chemistry, which is 3,4-dihydroxy-l-phenylalanine. This crosslinking methodology significantly improved mechanical strength of the hydrogel, with 11,200% increase in compressive failure strength; it endowed the hydrogel with outstanding antifatigue and training strengthening properties that makes its mechanical strength increasing in a 50 cycles compressive test; the hydrogel showed excellent self-healing properties that in rheological characterization; it also displayed enhanced storage modulus after withstanding a shear strain up to 1100%; meanwhile, the hydrogel exhibited extreme ductility with an elastic modulus of only 10.90–16.53 kPa. 3,4-dihydroxy-l-phenylalanine also renders the hydrogel its inherent antioxidant activity, conductivity, and bioadhesiveness. Together with the highly transparent appearance, the hydrogels possess a great potential and practibility in the fields of skin dressings.     

Photopolymerized injectable RGD-modified fumarated poly(ethylene glycol) diglycidyl ether hydrogels for cell growth

In this study, photopolymerized hydrogels of fumarated poly(ethylene glycol) diglycidyl-co- poly(ethylene glycol) diacrylate have been synthesized and modified with cell adhesion peptide, Arg-Gly-Asp (RGD). The structural and mechanical properties of the hydrogels are found to be poly(ethylene glycol) diacrylate (PEGDA) dependent. The percentage of gelation is increased from 72 to 89 wt.-% when the amount of the crosslinker co-monomer (PEGDA) in the hydrogel formulation is increased from 20 to 40 wt.-%. In the present case, the equilibrium mass swelling is decreased from 216 to 93%. The viscosities of the uncured formulations have also been measured and likewise, the results were influenced by the increasing amount of PEGDA that reduced the value from 83 to 36 cP. The compressive modulus of the prepared hydrogels was improved with the addition of the PEGDA. Cell growth experiments have been performed by comparing the properties of the hydrogels with and without RGD units. The results show that RGD units enhance the adhesion of cells to the surface of the hydrogels. SEM-EDS studies reveal that nitrogen and calcium are produced on the osteoblast-seeded surface of the scaffold within the culture time period. [Figure: see text].     

Morphological and mechanical properties of tannic acid/PAAm semi-IPN hydrogels for cell adhesion

A series of hydrogels were fabricated from tannic acid (TA), a typical plant polyphenol widely present in wood, and polyacrylamide (PAAm) by semi-IPN and cryogelation techniques. The introduction of TA into the PAAm network endows the system with enhanced cell adhesion properties. The cryogels with open interconnected macropores had a superfast swelling rate and a high swelling ratio, as well as high elasticity in response to compression. The degradation of the hydrogels can be tuned by modulating the content of cross-linker poly(ethylene glycol) diacrylate (PEGDA). Cytotoxicity results revealed that the hydrogels were non-toxic to COS-7 cells. All these results suggested that TA/PAAm semi-IPN hydrogels have great potential for applications in tissue engineering.     

壳聚糖-碳纳米管/壳聚糖半互穿网络水凝胶的机械性能及pH敏感性

为制备具有较高机械性能的壳聚糖凝胶, 设计将壳聚糖-碳纳米管复合物引入壳聚糖凝胶网络. 以戊二醛为交联剂, 采用冷冻干燥的方法制备了一系列壳聚糖-碳纳米管/壳聚糖半互穿网络凝胶. 测试了凝胶的机械性能, 考察了凝胶在不同pH值缓冲溶液中的去溶胀和溶胀行为. 实验结果表明, 添加壳聚糖-碳纳米管复合物的凝胶与普通壳聚糖凝胶相比机械强度明显增加, 而凝胶本身的pH敏感性不受影响.     

Preparation and characterization of a novel stimuli-responsive nanocomposite hydrogel with improved mechanical properties

A novel stimuli-responsive organic/inorganic nanocomposite hydrogel (NC hydrogel) with excellent mechanical properties was synthesized by in situ polymerization of 2-(2-methoxyethoxy) ethyl methacrylate (MEO(2)MA), oligo (ethylene glycol) methacrylate (OEGMA) and acrylic acid (AAc), as the polymeric matrix (PMOA), and fibrillar attpulgite (AT), as the reinforcer and cross-linker. The effect of the AT content on the mechanical properties for the swollen and dried NC hydrogels was determined by tensile testing and dynamic mechanical analysis (DMA), respectively. The tensile testing results showed that the incorporation of AT nanoparticles significantly enhanced the mechanical properties of NC hydrogels. As the content of AT increased, the tensile strength, tensile modulus and effective cross-linked chain density increased. The DMA results showed that the storage modulus of AT/PMOA NC hydrogels was increased and the glass transition temperatures shifted to higher temperature compared to the pure PMOA hydrogel, which further indicated that the enhancement of mechanical property depended upon the presence and content of AT. In addition, the faster swelling rates of the NC hydrogels were observed in comparison with the corresponding physically cross-linked PMOA hydrogel, except for 1% AT/PMOA sample. However, the deswelling kinetics of NC hydrogels was obviously retarded.     

海藻酸钠和聚N-异丙基丙烯酰胺半互穿网络水凝胶的溶胀动力学研究

以海藻酸钠 (SA)和N 异丙基丙烯酰胺 (NIPAM)为原料 ,制备出具有温度敏感性的半互穿网络水凝胶 (SA PNIPAMsemi IPN) .主要研究了海藻酸钠用量、水介质温度及pH值对该凝胶溶胀速率的影响 .结果表明 ,在PNIPAM最低临界溶解温度 (LCST)以下 ,该凝胶的溶胀速率随着凝胶网络中SA组分的增加而增大 ,且溶胀速率取决于高分子链的松弛速率 ;pH对凝胶溶胀速率的影响与温度有关 ,温度对溶胀速率的影响与pH有关 .     

Poly(vinyl alcohol)/poly(<Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide) semi-interpenetrating polymer network hydrogels with rapid response to temperature changes

A series of thermosensitive and fast-response poly(vinyl alcohol) (PVA)/poly(N-isopropylacrylamide) (PNIPA) hydrogels were prepared by incorporating PVA into cross-linked PNIPA to form a semi-interpenetrating polymeric network (semi-IPN). Compared to the conventional PNIPA hydrogel, the semi-IPN hydrogels thus prepared exhibit significantly faster response rates and undergo full deswelling in 1 min (lose about 95% water within 1 min) when the temperature is raised above their lower critical solution temperature, and have larger equilibrium swelling ratios at room temperature. These improved properties are attributed to the incorporation of PVA, which forms water-releasing channels and results in increased hydrophilicity, into the PNIPA hydrogel networks.     

A new polymer/clay nano-composite hydrogel with improved response rate and tensile mechanical properties

A new type of stimuli-responsive organic/inorganic nano-composite hydrogel was prepared by introducing fibrillar attapulgite into poly(2-hydroxyethyl methacrylate-co-poly(ethylene glycol) methyl ether methacrylate-co-methacrylic acid) network, in which the nanosized attapulgite fibril worked as the cross-linker instead of conventional chemical cross-linker. In the preparation process, a prepolymerization route was adopted to effectively stabilize the dispersion of attapulgite. The structure and morphology of the nano-composite hydrogels were characterized by SEM, FTIR and DSC. The swelling/deswelling behaviors and tensile mechanical properties of the nano-composite hydrogels were compared with that of the corresponding chemically cross-linked hydrogel. The results showed that the nano-composite hydrogels had much greater equilibrium-swelling ratio, much faster response rate to pH and significantly improved tensile mechanical properties. As the content of AT increased, the tensile strength, effective cross-link chain density and glass transition temperature increased, while the equilibrium swelling ratio, deswelling rate and elongation at break decreased.     

丝素蛋白-聚氨酯复合水凝胶的制备及性能研究

以聚乙二醇(PEG)、聚氧化丙烯二醇(PPG)、异弗尔酮二异氰酸酯(IPDI)为主要原料制备聚氨酯预聚体(PU),与丝素蛋白水溶液(SF)交联制得丝素蛋白-聚氨酯(SF-PU)复合水凝胶.分别利用ATR、SEM对水凝胶组成、结构及微观形貌进行表征;DSC、吸水溶胀测试探讨了丝素蛋白与聚氨酯的质量比(SF/PU)以及聚氨酯中不同软段质量比(PEG/PPG)对SF-PU水凝胶热性能、溶胀性能的影响.结果表明,SF-PU水凝胶具有多孔结构;样品中不同的SF/PU、PEG/PPG均对材料的玻璃化转变温度、结晶度及溶胀性能产生影响,且当水凝胶组分为SF/PU=1/25、PEG/PPG=2/1时,平衡溶胀比(ESR)可达到440%;水凝胶在溶胀初始阶段符合菲克扩散模型,整个溶胀过程遵循溶胀动力学2级方程.     

Preparation of a novel pH-responsive silver nanoparticle/poly(HEMA-PEGMA-MAA) composite hydrogel

In this paper, series of novel pH-responsive silver (Ag) nanoparticle/poly(2-hydroxyethyl methacrylate (HEMA)-poly(ethylene glycol) methyl ether methacrylate (PEGMA)-methacrylic acid (MAA)) composite hydrogel were successfully prepared by in situ reducing Ag⁺ ions anchored in the hydrogel by the deprotonized carboxyl acid groups. X-ray diffraction (XRD), UV-vis spectrophotometry, transmission electron microscopy (TEM) and electric conductivity tests were used to characterize the composite system. It was found that the size and morphology of the reduced Ag nanoparticles in the composite hydrogels could be changed by loading the Ag⁺ ions at various swelling ratios of hydrogel. Moreover, compared to the pure poly(HEMA-PEGMA-MAA) hydrogel, not only did the Ag nanoparticle/poly(HEMA-PEGMA-MAA) composite hydrogels exhibit much higher swelling ratio and faster deswelling rate, but also higher pH switchable electrical properties upon controlling the interparticle distance under pH stimulus. The pH responsive nanocomposite hydrogel reported here might be a potentially smart material in the range of applications including electronics, biosensors and drug-delivery devices.     

Preparation and characterization of pH- and temperature-responsive semi-IPN hydrogels of carboxymethyl chitosan with poly (<Emphasis Type="Italic">N</Emphasis>-isopropyl acrylamide) crosslinked by clay

A new kind of pH- and temperature-responsive semi-interpenetrating polymer network hydrogel based on linear carboxymethylchitosan (CMCS) and poly (N-isopropylacrylamide) (PNIPA) crosslinked by inorganic clay was prepared. The pH-and temperature-responsive behaviors, the deswelling kinetics, and the mechanical properties of the hydrogel were investigated. The hydrogels exhibited a volume phase transition temperature around 33 °C with no significant deviation from the conventional PNIPA hydrogels. The results of the influence of pH value on the swelling behaviors showed that the minimum swelling ratios of the hydrogels appeared near the isoelectric point (IEP) of CMCS, and when pH deviated from the IEP, the hydrogels behaved as polycations or polyanions. The novel hydrogels had much higher response rate than the conventional CMCS/PNIPA hydrogels. Moreover, the semi-IPN hydrogels crosslinked by clay could be elongated to more than 800% and the elongation could be recovered almost completely and instantaneously.     

Rheology and Drug Release Properties of Bioresorbable Hydrogels Prepared from Polylactide/Poly(ethylene glycol) Block Copolymers

Ring-opening polymerization of L(D)-lactide was realized in the presence of poly(ethylene glycol) (PEG), yielding PLLA/PEG and PDLA/PEG block copolymers. Bioresorbable hydrogels were prepared from aqueous solutions containing both copolymers due to interactions and stereocomplexation between PLLA and PDLA blocks. The rheological properties of the hydrogels were investigated under various conditions by changing copolymer concentration, temperature, time and frequency. The hydrogels constitute a dynamic and evolutive system because of continuous formation/destruction of crosslinks and degradation. Drug release studies were performed on hydrogel systems containing bovine serum albumin (BSA). The release profiles appear almost constant with little burst effect. The release rate depends not only on gelation conditions such as time and temperature, but also on factors such as drug load, as well as molar mass and concentration of the copolymers.     

交联聚(N-异丙基丙烯酰胺)/(海藻酸钠/聚(N-异丙基丙烯酰胺))半互穿网络水凝胶的制备及其溶胀性能

将线性聚(N-异丙基丙烯酰胺)(PNIPAAm)和海藻酸钠(SA)分子同时引入到PNIPAAm凝胶中,制备了交联聚(N-异丙基丙烯酰胺)/(海藻酸钠/聚(N-异丙基丙烯酰胺))半互穿网络(Cr-PNIPAAm/(SA/PNIPAAm)semi-IPN)水凝胶。在弱碱性条件下(pH=7.4),改变SA与线性PNIPAAm的质量比对Cr-PNIPAAm/(SA/PNIPAAm)semi-IPN水凝胶的溶胀度没有太大的影响。在酸性条件下(pH=1.0),其溶胀度随着SA与线性PNIPAAm质量比的减小而增大。由于亲水性SA与线性PNIPAAm的协同作用,Cr-PNIPAAm/(SA/PNIPAAm)semi-IPN水凝胶的消溶胀速率得到很大提高。     

Synthesis and characterization of poly(ethylene glycol)‐based thermo‐responsive polyurethane hydrogels for controlled drug release

The thermo‐responsiveness, swelling and mechanical properties of a series of novel poly(ester‐ether urethane) hydrogels have been investigated. These thermo‐sensitive hydrogels were obtained by combining hydrophobic biodegradable poly(ε‐caprolactone) diols and hydrophilic two‐, three‐ and four‐arm hydroxyl terminated poly(ethylene glycol) (PEG) of various molecular weights, using hexamethylene diisocyanate, dichloroethane as solvent and a tin‐based catalyst. The use of multifunctional PEGs leads to the formation of covalent crosslinking points allowing an additional control of the swelling capability. Thus, it was found that tuning the hydrophilic/hydrophobic balance and the crosslinking degree by changing the composition, the swelling and the thermo‐responsive behavior of these hydrogels could be modulated. The obtained hydrogels showed a volume transition at around room temperature. Therefore, and taking into account their biocompatibility, these hydrogels show promising properties for biomedical applications, such as drug delivery. Thus, the loading and release of diltiazem hydrochloride, an antihypertensive drug used as model, were investigated. These new PEG polyurethane hydrogels were able to incorporate a high amount of drug providing a sustained release after an initial burst effect. Copyright © 2013 John Wiley & Sons, Ltd.     

Microstructured polyacrylamide hydrogels made with hydrophobic nanoparticles

Poly(methyl methacrylate) nanosize particles, made by microemulsion polymerization, were dispersed in an acrylamide aqueous solution, which was polymerized in the presence of a cross-linking agent to yield microstructured hydrogels. The kinetics of swelling and the mechanical properties of these hydrogels were investigated as a function of concentration of particles. The microstructured hydrogels exhibit higher equilibrium swelling and larger Young modulus than conventional (that is, without particles) polyacrylamide hydrogel. The morphology of the microstructured hydrogels was examined by transmission electron microscopy.     

负载蛋白质的胶原/聚两性电解质IPN角膜替代物

以碳二亚胺/N-羟基琥珀酰亚胺(EDC/NHS)和聚乙二醇二丙烯酸酯(PEGDA)为交联剂分别对猪皮去端肽Ⅰ型胶原和3-(甲基丙烯酰胺)丙基-二甲基(3-磺丙)胺(MPDSAH)进行交联, 制备了具有互穿聚合物网络(IPN)结构的角膜替代物. 胶原基IPN角膜替代物的折光指数和白光透过率与天然人角膜相似. IPN水凝胶具有优于纯胶原凝胶的力学性能, 同时PMPDSAH网络的引入明显提高了IPN凝胶在胶原酶中的稳定性. 体外细胞培养实验结果表明, IPN角膜替代物支持人角膜上皮细胞生长. 通过冷冻干燥-溶胀后包覆技术可将牛血清白蛋白(BSA)和神经生长因子(NGF)装载到角膜替代物中, 负载药物的冻干凝胶可干态保存, 避免了湿态下蛋白质等活性因子的失活和漏泄; 再吸水恢复原状的特性可使角膜替代物完好地移植病灶部位, NGF具有良好的缓释效果. 此负载NGF的复合角膜替代物有望促进角膜组织和神经的再生.     

Synthesis and characterization of novel biodegradable unsaturated poly(ester amide)/poly(ethylene glycol) diacrylate hydrogels

A series of novel biodegradable hydrogels were designed and synthesized from four types of unsaturated poly(ester amide) (UPEA) and poly(ethylene glycol) diacrylate (PEG‐DA) precursors by UV photocrosslinking. These newly synthesized biodegradable UPEA/PEG‐DA hydrogels were characterized by their gel fraction (G_f), equilibrium swelling ratio (Q_eq), compressive modulus, and interior morphology. The effect of the precursor feed ratio (UPEAs to PEG‐DA) on the properties of the hydrogels was also studied. The incorporation of UPEA polymers into the PEG‐DA hydrogels increased their hydrophobicity, crosslinking density (denser network), and mechanical strength (higher compressive modulus) but reduced Q_eq. When different types of UPEA precursors were coupled with PEG‐DA at the same feed ratio (20 wt %), the resulting hydrogels had similar Q_eq values and porous three‐dimensional interior morphologies but different G_f and compressive modulus values. These differences in the hydrogel properties were correlated to the chemical structures of the UPEA precursors; that is, the different locations of the >C?C< double bonds in individual UPEA segments resulted in their different reactivities toward PEG‐DA to form hydrogels. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3932–3944, 2005     

A simple method for the production of hydrogels based on hemicellulose in aqueous solution

A simple method of bamboo hemicellulose-based hydrogel with multiple responses properties was proposed employing glow discharge electrolysis plasma (GDEP). The network of hydrogels was characterized by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The mechanical properties, swelling, and stimuli responses were also investigated. The results showed that swelling ratio of hydrogel under 570 V and 90 s was 903.6 g/g. Too long discharge time or high discharge voltage indicated high compression stress and modulus. The hydrogels exhibited excellent sensitivity to pH and salts, which indicated their widely application such as adsorption, separation, and drug release systems.