Synthesis and micellar properties of 1-decyl-2,3-dimethylimidazolium bromide surfactant in water and water-ethanolamine mixtures at 298.15 K

1-Decyl-2,3-dimethylimidazolium bromide (ddmimBr) has been synthesized by the reaction of 1,2-dimethylimidazole and 1-bromodecane. Micellization of ddmimBr surfactant in water (W) and water-ethanolamine (W-EA) with the weight percent of EA changing within the range 0-39.79%, has been investigated at 298.15 K. Information about the influence of the added EA on the critical micelle concentration (CMC) was obtained through density and surface tension measurements. This last provides information about the dependence of the surface excess concentration, the minimum area per surfactant molecule and the surface pressure at the CMC on the added weight percentage of organic solvent. The effect of binary aqueous mixtures of W-EA on the apparent molar volume (phi V) of the ddmimBr has been investigated. The apparent molar volume upon aggregation (Delta phi V) shows a maximum at about 15 wt% of EA, this behavior is discussed in terms of the changes of the solvent structure. Partial specific volume data, obtained by density measurements, indicate that the fraction of solvent molecules interact with the surfactant remained roughly constant.     

Solvation in binary mixtures of water and polar aprotic solvents: theoretical calculations of the concentrations of solvent-water hydrogen-bonded species and application to thermosolvatochromism of polarity probes

Thermo-solvatochromism of two polarity probes, 2,6-diphenyl-4-(2,4,6-triphenyl- pyridinium-1-yl)phenolate, RB, and 2,6-dichloro-4-(2,4,6-triphenylpyridinium-1-yl) phenolate, WB, in aqueous acetone, Me2CO, and aqueous dimethylsulfoxide, DMSO, has been studied. The data obtained have been analyzed according to a recently introduced solvation model that explicitly considers the presence of 1:1 organic solvent-water hydrogen-bonded species, S-W, in the bulk binary mixture and its exchange equilibria with (S) and (W) in the solvation shell of the probe. Calculations require reliable values of Kdissoc, the dissociation constant of S-W. Previously, this has been calculated from the dependence of the densities of binary solvent mixtures on their composition. Using iteration, the volume of the hydrogen-bonded species, VS-W, and Kdissoc were obtained simultaneously from the same set of experimental data. This approach may be potentially suspect because Kdissoc, and VS-W are highly correlated. Therefore, we extended a recently introduced approach for the calculation of Valcohol-W to binary mixtures of water with acetone, acetonitrile, N,N-dimethylformamide, DMSO, and pyridine. This approach includes: Determination of VS-W from ab initio calculations by the COSMO solvation model; correction of these volumes for the nonideal behavior of the binary solvent mixtures at different temperatures; use of corrected VS-W as a constant (not an adjustable parameter) in the equation that is employed to calculate Kdissoc (from density versus binary solvent composition). Solvation of RB and WB by Me2CO-W showed different behavior from that of aqueous DMSO. Thus, water is able to displace Me2CO more efficiently than DMSO from the probe solvation shell. Me2CO-W and DMSO-W displace their corresponding precursor solvents; this is more efficient for the former case because the strong DMSO-W interactions attenuate the solvation capacity of this species. Temperature increase resulted in desolvation of both probes, due to concomitant decrease of the structures of the component solvents.     

Amide-water interactions in cosolvent systems. I. Solubilities and apparent molar volumes of methyl paraben

Solubility and apparent molar volume data are used to demonstrate effects of amide alkylation on amide-water interactions at 25° C. Precise measurements were made of the apparent molar volumes of the amides in binary amide-water mixtures using a dilatometric technique. The results show that the apparent molar volumes of alkyl-substituted amides in water pass through a minimum at an amide concentration which varies inversely with the degree of alkylation. Further studies showed that the solubilities of methyl paraben (methyl-p-hydroxybenzoate) and naphthalene in various amide-water solvent systems increased in characteristic fashion with amide alkylation.     

Volumetric behavior and micelle formation of aqueous surfactant mixtures

A thermodynamic treatment of the volumetric behavior of surfactant mixtures in water have been developed on the basis of the thermodynamic treatment of mixed micelle by Motomura et al. Densities of aqueous solutions of mixtures of decyltrimethylammonium bromide (DeTAB) and dodecyltrimethylammonium bromide (DTAB) have been measured as a function of total molality at constant compositions. The apparent molar volumes of the mixtures have been derived from the density data and the mean partial molar volume of monomeric surfactant mixture V _t ^w , the molar volume of mixed micelle V^M/N _t ^M , the voluem of formation of mixed micelle _W ^M V, and the composition of surfactant in the mixed micelle have been evaluated. The V _t ^W , V^M/N _t ^M , and _W ^M V have been observed to depend on the composition. The linear dependence of V _t ^W and V^M/N _t ^M on the composition indicates that the mixing of DeTAB and DTAB is ideal both in the monomeric and micellar states. This has been confirmed further by the shape of the critical micelle concentration vs. composition curves.     

Apparent Molar Volumes and Viscosities of Dl-α-Alanine in Water-Ethanol Mixtures

Abstract

In this work we present a systematic study of the apparent molar volumes and the viscosities of DL-α-alanine in aqueous ethanol solutions at 25,00°C. The molar fractions of ethanol for the solvent mixtures were selected taking into account that thermodynamic properties such as partial molar volumes and heat capacities of these mixtures show a transition concentration around X _et = 0,1 at which its behavior suffers a deep change. Besides, this ethanol concentration is near to that required to produce 50% of protein denaturation.

The results were used to evaluate the limiting partial molar volume V0 of the solute the volume changes associated with its transfer from water to aqueous ethanol solutions and the viscosity B coefficients of DL-α-alanine. The values obtained for the transference molar volumes and the viscosity B coefficients of alanine in the aqueous mixtures show a minimum at X _et = 0,1000. The results are discussed in terms of changes in the solvent structure (Ref. [1])     

Volumetric properties of {PEG 200 (or 300) (1) + water (2)} mixtures at several temperatures and correlation with the Jouyban–Acree model

Molar volumes and excess molar volumes were investigated from density values for {PEG 200 (1) + water (2)} and {PEG 300 (1) + water (2)} binary mixtures at temperatures from 278.15 to 313.15 K. Both systems exhibit negative excess volumes probably due to increased interactions such as hydrogen bonding and/or large differences in molar volumes of components. Volume thermal expansion coefficients were also calculated for both binary mixtures and pure solvents. The Jouyban–Acree model was used for density and molar volume correlations of the studied mixtures at different temperatures. The mean relative deviations between experimental and calculated density data were 0.02% and 0.04%, for aqueous mixtures of PEG 200 and PEG 300, respectively; whereas the corresponding values for molar volume data were 1.76% and 2.72%.     

丙氨酸在葡萄糖和蔗糖水溶液中的体积性质

利用精密数字密度计分别测定了丙氨酸在不同组成的葡萄糖和蔗糖水溶液中的密度,计算了丙氨酸的表观摩尔体积、极限偏摩尔体积和理论水化数,根据结构水合作用模型讨论了迁移偏摩尔体积的变化规律,并与乙二醇-水和丙三醇-水等多羟基体系作了比较.结果表明,丙氨酸分子在多羟基化合物-水体系中体积效应的大小与多羟基化合物所含OH基数目有关.     

Refractive Index and Density Measurements for Selected Binary Protic‐Protic,Aprotic‐Aprotic,and Aprotic‐Protic Systems at Temperatures from 298.15 K to 308.15 K

The refractive indices (n) and the densities (ρ) of: (1) protic‐protic solvent mixtures (methanol‐ethanol, methanol‐porpanol, methanol‐butanol and ethanol‐water), (2) aprotic‐aprotic solvent mixtures (acetonitrile‐dimethylformamide, acetonitrile‐dimethylsulphoxide, and acetonitrile‐1,4‐dioxane) and (3) aprotic‐protic solvent mixtures (dimethylformamide, acetonitrile with water and some aliphatic alcohols) were measured experimentally at different temperatures (25, 30 and 35 °C). From the values of the measured refractive indices and densities, the excess refractive indices (n^E), molar refractions (R), atomic polarization (P_A), molar volumes (V), solvated radii (r) and polarizabilities (α) of the mixed solvents were calculated. The results show that the solvent‐solvent interaction reaches maximum value at a definite mole fraction (x) of each solvent depending on its nature. Also, the excess refractive indices, densities and atomic polarizations are found to decrease as the temperature increases. On the other hand, the molar volumes, solvated radii, molar refractions and polarizabilities are found to increase as the temperature increases.     

I>D-甘露醇在正丙醇和异丙醇水溶液中的体积性质

使用石英振荡管密度计精确测定了298.15 K温度下不同浓度的甘露醇-正丙醇-水和甘露醇-异丙醇-水三元溶液的密度. 计算了甘露醇的表观摩尔体积V_Φ和极限偏摩尔体积, 得到了其由纯水溶剂转移至混合溶剂中的迁移偏摩尔体积. 结果表明, 正丙醇在溶液中对甘露醇体积性质的影响较异丙醇显著. 从溶质-溶剂分子间相互作用及丙醇同分异构体中羟基位置的不同对体积性质的变化规律进行了讨论.     

A study of partial molar volumes of citric acid and tartaric acid in water and binary aqueous mixtures of ethanol at various temperatures

Partial molar volumes of citric acid and tartaric acid have been determined in water and binary aqueous mixtures of ethanol (5, 10, 15, 20 and 25% by weight of ethanol) at different temperatures and acid concentrations from the solution density measurements. The data have been evaluated by using Masson equation and the obtained parameters have been interpreted in terms of solute-solvent interactions. The partial molar volumes vary with temperature as a power series of temperature. Structure making/breaking capacities of the organic acids have been inferred from the sign of i.e. second derivative of partial molar volume with respect to temperature at constant pressure. Both the organic acids behave as structure breakers in water and water + ethanol.     

Properties of L-ascorbic acid in water and binary aqueous mixtures of D-glucose and D-fructose at different temperatures

Using density and sound velocity partial molar volumes, partial molar adiabatic compressibilities, partial molar expansibilities and structure of L-ascorbic acid have been determined in water and aqueous mixtures of D-glucose and D-fructose at different concentrations and temperatures. Masson’s equation was used to analyze the measured data. The obtained parameters have been interpreted in terms of solute–solute and solute–solvent interactions. It is found that the L-ascorbic acid acts as structure breaker in water as well in binary studied mixtures.     

Structure,solvatochromism, and solvation of trans-[CoIII(cyclam)(NCS)2](NCS) and the structure of [CoII(Me4cyclam) (NCS)]2[Co(NCS)4]MeOH

The structures of trans-[CoIII(cyclam)(NCS)2](NCS) and of [CoII(Me4cyclam)(NCS)]2[Co(NCS)4]·MeOH have been established by X-ray diffraction methods. The solvatochromic behavior of the trans-[Co(cyclam)(NCS)2]+ cation in several binary aqueous solvent mixtures is reported. Transfer chemical potentials for this complex from H2O into MeOH-H2O mixtures have been established from solubility measurements on its thiocyanate salt. The solvatochromic behavior of this cation is discussed in the context of other solvatochromic inorganic complexes; its transfer chemical potentials are discussed in relation to those of other cobalt(III) complexes.     

Volumetric Properties of Nucleic Acid Bases and Nucleosides in Aqueous Ethanol, 1,2-Ethanediol, 2-Propanol, and 2-Methyl-2-Propanol at 25°C

Partial molar volumes of cytosine, uracil, thymine, cytidine, uridine, thymidine, and adenosine have been measured in different concentrations of aqueous ethanol, 1,2-ethanediol, 2-propanol, and 2-methyl-2-propanol at 25°C using densimetry. These data are utilized in conjunction with the partial molar volumes of these nucleic acid bases and nucleosides in water reported earlier to deduce the partial molar volumes of transfer from water to aqueous alcohol or diol. The results are explained in terms of likely solute–solvent interactions; the role of solvent in these interactions is discussed. The partial molar volume data are also used to calculate the contribution of –CH₂- groups in the nucleic acid base or solvent and of ribose in the nucleoside to the partial molar volume of transfer. The validity of group additivity in these systems is discussed.     

288.15, 298.15和308.15 K温度条件下甘氨酰甘氨酸在蔗糖-水混合溶剂中的体积性质研究

利用Anton Paar DMA55精密数字密度计测定了288.15, 298.15和308.15 K甘氨酰甘氨酸在蔗糖-水混合溶剂中的密度, 计算了甘氨酰甘氨酸的表观摩尔体积VΦ和极限偏摩尔体积 , 得到了其由纯水溶剂转移至混合溶剂中的迁移偏摩尔体积Δtrs 和理论水化数Nh．根据共球交盖模型, 讨论了迁移偏摩尔体积和水化数的变化规律．结果表明, 甘氨酰甘氨酸带电中心与蔗糖之间的结构相互作用对其迁移体积有正贡献, 且占主导地位．甘氨酰甘氨酸的迁移偏摩尔体积为正值, 且随着蔗糖浓度的增大而增大; 理论水化数随温度升高、蔗糖浓度的增大而减小; 温度升高, 极限偏摩尔体积增大, 迁移偏摩尔体积变化很小．     

Raman spectroscopic study on the hydration structures of tetraethylammonium cation in water

Conformational changes of tetraethylammonium ion (Et4N+) in aqueous solution have been studied by Raman spectroscopy as functions of pressure and concentration. The difference in the partial molar volume (Delta V(tg x tg-->tt x tt)) between the trans-gauche x trans-gauche (tg x tg) and trans-trans x trans-trans (tt x tt) conformers of Et4N+ ion has been calculated from the pressure dependence of the relative Raman intensity ratio between the conformers. We discuss about the Delta V(tg x tg-->tt x tt) with two contributions from the molecular and hydration volumes. Delta V(tg x tg-->tt x tt) is found to be negative, and this is mainly due to the large molecular volume contribution. The value of Delta V(tg x tg-->tt x tt) becomes smaller with increasing R probably due to the hydration volume contribution. In view of the pressure and concentration dependences, the water molecules around Et4N+ ions at R = 19 (R= moles of water/moles of salt) mainly form the hydrophobic hydration. The hydrophobic hydration may prefer the tt x tt conformer to the tg x tg conformer. On the other hand, the hydration structure at R = 4 no longer forms the hydrophobic hydration and changes to another type of hydration, where the medium H-bond component is the dominant species. The increase of the ion-ion interactions with decreasing R induces large fractions of the tg x tg conformer.     

Investigations of Molecular Interactions in the Binary Mixtures of 1-Butyl-3-methylimidazolium bis(Trifluoromethanesulfonyl) Amide and 2-Propoxyethanol from <Emphasis Type="Italic">T</Emphasis> = (298.15 to 323.15) K at Atmospheric Pressure

Density and speed of sound values of pure and binary mixtures of 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl) amide ([Bmim][NTf₂]) and 2-propoxyethanol (2-PR) were determined over the whole composition range as a function of temperature from 298.15 to 323.15 K) under atmospheric pressure. Heat capacity values of the pure compounds were also measured. The experimental values were used to calculate excess molar volume, excess isentropic compressibility, excess intermolecular free length and excess speed of sound values. The excess values were fitted with the Redlich–Kister polynomial equation to estimate the binary coefficients and standard deviation between the experimental and calculated values. The partial molar volumes at infinite dilutions were also calculated. The trends of variation of these properties were interpreted in light of the solute–solvent interactions occurring in the system. Further, the molecular interactions in the binary system were analyzed using experimental FT-IR spectra recorded at room temperature.     

Reassessment of the binary, ternary, and quaternary interactions in mixed electrolytes from thermodynamic quantities: The systems with uncommon ions containing hydrophobic character

Accurate estimates of the binary, ternary, and quaternary interactions in aqueous ionic mixtures with uncommon ions with hydrophobic character are presented. For this purpose, the values of the excess Gibbs free energy of mixing, Delta m G(E), obtained from our earlier isopiestic osmotic coefficients (Kumar, A. J. Phys. Chem. B2003, 107, 2808) for the mixtures of NaCl with four guanidinium (Gn+) salts-CH3COOGn, GnNO3, GnClO4, and Gn2SO4-are analyzed with the help of the method developed by Leifer and Wigent. The methodology of Leifer and Wigent is based on the equations of Scatchard-Rush-Johnson and Friedman's cluster integral expansion theory. The Scatchard-Rush-Johnson theory explicitly considers the quaternary and higher-order ionic interactions in the mixtures as compared to the specific ion interaction theory of Pitzer, which accounts for binary and ternary interactions only. The contributions due to binary, ternary, and quaternary interaction terms to total Delta m G(E) are estimated and discussed critically. Also, the interaction between the same two cations, for example, Gn+ - Gn+, is estimated and found significant, which otherwise cannot be obtained by the use of Pitzer's theory. The information obtained from the analysis of Delta(m)G(E) is also supported by the newly measured excess volumes of mixing, Delta m V(E), at 298.15 K. The individual contributions of the binary, ternary, and quaternary interaction terms to total Delta m V(E) are described. The binary, ternary, and quaternary interaction terms for both Delta m G(E) and Delta m V(E) are analyzed in terms of Friedman's cluster integral expansion theory.     

Conductivities, volumes, fluorescence, and aggregation behavior of ionic liquids [C4mim][BF4] and [C(n)mim]Br (n = 4, 6, 8, 10, 12) in aqueous solutions

Densities, conductivities, and polarity indexes of pyrene for aqueous solutions of a series of ionic liquids [C(n)mim]Br (n = 4, 6, 8, 10, 12) and [C4mim][BF4] have been determined at 298.15 K as a function of ionic liquid concentrations. It was shown that possible aggregation appeared for the ionic liquids in aqueous solutions except for [C4mim]Br. The critical aggregation concentration (CAC) of the ionic liquids, the ionization degree of aggregates (beta), the standard Gibbs energy of aggregation (Delta G(m)(o)), the limiting molar conductivity (Lambda(m)(o)), and the standard partial molar volume (V(m)(o)) for the ionic liquids were derived from the experimental data. The dependence of the CAC, Delta G(m)(o), Lambda(m)(o), and V(m)(o) on the length of the alkyl chain of the cations was examined. It was further suggested from volumetric data that a micelle was formed for [C8mim]Br, [C10mim]Br, and [C12mim]Br in aqueous solutions. Their apparent molar volumes at the critical micelle concentration (V Phi,CMC), apparent molar volumes in the micelle phase (V(Phi)(mic)), and the change of their apparent molar volume upon micellization (Delta V Phi,m) were calculated by application of the pseudophase model of micellization. In addition, the average aggregation number of [C(n)mim]Br (n = 8, 10, 12) has been determined by the steady-state fluorescence quenching technique, and predicted from a simple geometrical mode. It is found that the experimental values are in good agreement with the predicted ones.     

Determination of the excess molar and partial molar volumes of the constituents in the binary mixtures with tri-ethylamine

The excess molar volume and excess partial molar volumes of binary mixtures of tri-ethylamine with toluene (Tn), ethylbenzene (Ebz) and n-propylbenzene (n-PBz) have been calculated using the MS-Excel method. The excess molar volumes have been found to be negative throughout the entire range of composition. The temperature effects are found to be insignificant, so the mixtures may be termed regular mixtures of Hildebrand.     

Study of some volumetric and refractive properties of {PEG 300 (1) + ethanol (2)} mixtures at several temperatures

Molar volumes and excess molar volumes were investigated from measured density values for {PEG 300 (1) + ethanol (2)} binary mixtures at temperatures from 278.15 to 313.15 K. Both systems exhibit negative excess volumes probably due to increased interactions like hydrogen bonding and/or large differences in molar volumes of the components. Volume thermal expansion coefficients were also calculated for both binary mixtures and pure solvents. Refractive indices were also determined for all these non-aqueous mixtures and neat solvents at all temperatures. Furthermore, the Jouyban–Acree model was used for density, molar volume and refractive index correlations of the studied mixtures at different temperatures. The mean relative deviations between experimental and back-calculated density, molar volume and refractive index data were 0.07%, 0.99% and 0.01%, respectively.