Magnetic domain structure in Fe78.8−xCoxCu0.6Nb2.6Si9B9 nanocrystalline alloys studied by Lorentz microscopy

The magnetic domain structures of Fe_78.8−xCo_xCu_0.6Nb_2.6Si₉B₉ (x=0, 20, 40, 60) alloys are investigated by Lorentz microscopy coupled with the focused ion beam method. The specimen prepared using the FIB method is found to have a considerably more uniform thickness compared to that prepared using the ion-milling method. In Fe_38.8Co₄₀Cu_0.6Nb_2.6Si₉B₉ and Fe_18.8Co₆₀Cu_0.6Nb_2.6Si₉B₉ alloys, 180° domain walls extending in the direction of the induced magnetic anisotropy are observed. Analysis with Lorentz microscopy reveals that the width of the magnetic domains decreases with an increase in the cobalt content or the induced magnetic anisotropy K_u, that is, the domain width d is proportional to the induced magnetic anisotropy (K_u)^−1/4. On the other hand, in the in situ Lorentz microscopy observation as a function of temperature, magnetic ripple structures are found to appear in a localized area due to the fluctuation of magnetization vectors from 423 K. It is observed that the induced magnetic anisotropy caused by the applied magnetic field at 803 K is not suppressed by the magnetic ripple structures observed at 423–443 K.     

Intrinsic coercivities of molecular beam epitaxy grown single-crystal Ni films on Ag buffer layer

Single-crystal Ni films were made by the molecular beam epitaxy (MBE) method on Si(1 0 0) and Si(1 1 0) substrates, respectively, with an 100 Å thick Ag buffer layer. The growth temperature T_S was 270 °C, and the film thickness t was 500 Å. From reflection high-energy electron diffraction (RHEED) patterns, the crystalline symmetries of the two films are clear and as expected. Intrinsic coercivities, H_C(1 0 0) and H_C(1 1 0), are plotted as a function of the angle of rotation ? around the crystal axes [1 0 0] and [1 1 0], respectively. The results show that both H_C(1 0 0) and H_C(1 1 0) exhibit mixed features of the crystalline (K_C) and the induced uniaxial magnetic (K_u) anisotropies. K_u is the magneto-elastic energy, due to lattice mismatch at the Ni/Ag interface. Moreover, the crystalline anisotropy fields, H_K(1 0 0) and H_K(1 1 0), and the induced anisotropy filed, H_u, can be calculated as a function of ?, respectively. Then, each H_C curve is fitted by the equation: H_C = H_o + H_K + H_u, where H_o is the isotropic pinning field. Meanwhile, domain structures were examined by the Bitter method, using Ferrofluid 707. On the Ni(1 0 0) film, we observed the charged cross-tie walls, and on the Ni(1 1 0) film, the un-charged Bloch walls.     

Structure,magnetic properties and magnetostriction of Fe81Ga19 thin films

The structure, magnetic properties and magnetostriction of Fe₈₁Ga₁₉ thin films have been investigated by using X-ray diffraction analysis, scanning electron microscope (SEM), vibrating sample magnetometer and capacitive cantilever method. It was found that the grain size of as-deposited Fe₈₁Ga₁₉ thin films is 50–60 nm and the grain size increases with increase in the annealing temperature. The remanence ratio (M_r/M_s) of the thin films slowly decreases with increase in the annealing temperature. However, the coercivity of the thin films goes the opposite way with increase in the annealing temperature. A preferential orientation of the Fe₈₁Ga₁₉ thin film fabricated under an applied magnetic field exists along 〈1 0 0〉 direction due to the function of magnetic field during sputtering. An in-plane-induced anisotropy of the thin film is well formed by the applied magnetic field during the sputtering and the formation of in-plane-induced anisotropy results in 90° rotations of the magnetic domains during magnetization and in the increase of magnetostriction for the thin film.     

Effect of magnetic field annealing on microstructure and magnetic properties of FePt films

FePt (20 nm) films were annealed in a magnetic field (along the normal direction of the films) at a temperature around the Curie temperature of L1₀ FePt. The influence of magnetic filed annealing on texture and magnetic properties of FePt films were investigated. The results indicate that preferential (0 0 1) orientation and perpendicular anisotropy can be obtained in L1₀ FePt films by using magnetic field annealing around the Curie temperature of L1₀ FePt. This is one of the potential methods to obtain (0 0 1) orientation and thus to improve the perpendicular anisotropy in FePt films.     

Magnetic properties of CdSb doped with Ni

Magnetic properties of the group II–V semiconductor CdSb single crystals doped with Ni (2 at%) are investigated. Deviation of the zero-field-cooled susceptibility, χ_ZFC, from the field-cooled susceptibility is observed below 300 K, along with a broad maximum of χ_ZFC (T) at T_b in fields below the anisotropy field B_K∼4 kG. T_b(B) obeys the law [T_b(B)/T_b(0)]^1/2=1–B/B_K with T_b(0)∼100 K. The magnetization exhibits saturation above ∼20–30 kG, a weak temperature dependence and anisotropy of the saturation value M_s. The coercive field is much smaller then B_K and displays anisotropy inverted with respect to that of M_s. Such magnetic behavior is expected for spheroidal Ni-rich Ni_1−xSb_x nanoparticles with high aspect ratio, broad distribution of the sizes and with orientations of the major axis distributed around a preferred direction.     

Damping and ferromagnetic resonance linewidth broadening in nanocrystalline soft ferromagnetic Fe–Co–Hf–N films

In order to describe high-frequency damping mechanisms of ferromagnetic films by means of the imaginary part of the frequency-dependant permeability, CMOS compatible ferromagnetic Fe₃₆Co₄₄Hf₉N₁₁ films were deposited by reactive r.f. magnetron sputtering on oxidised 5×5 mm²×380 μm (1 0 0)-silicon substrates with a 6-in. Fe₃₈Co₄₇Hf₁₅ target, as well as magnetic field annealing between 300 and 600 °C. An in-plane uniaxial anisotropy of around 4.5 mT as well as an excellent soft magnetic behaviour with a saturation polarisation of approximately 1.4 T could be observed after heat treatment at the above-mentioned temperatures, which drives these films to a high-frequency suitability. Ferromagnetic resonance frequencies of approximately up to 2.4 GHz could be obtained. The frequency-dependant permeability was measured with a broadband permeameter. Depending on the heat treatment, an increase of the full-width at half-maximum (FWHM) of the imaginary part of the frequency-dependant permeability is discussed in terms of two-magnon scattering, anisotropy-type competition and local resonance generation through predominant grain growth causing magnetisation and anisotropy inhomogeneities in the magnetic films. The grain size of the films was determined by (HRTEM) imaging and amounts from a few nanometres for films heat treated at 300 °C to more than 10 nm at 600 °C where the FWHM Δf_eff and the Landau–Lifschitz–Gilbert equation damping parameter α_eff increases with d_nm² and d_nm (e.g. d_nm is the grain diameter of the nonmagnetic Hf–N phase), respectively.     

Theoretic 3-D study of the high-frequency magnetic moment dynamics in thin ferromagnetic films with in-plane uniaxial anisotropy by considering eddy-current generation

In the present paper, theoretic investigations of polarisation vector precession trajectories represented by a macro spin in ferromagnetic films with in-plane uniaxial anisotropy were realised. For this purpose, the Landau–Lifschitz–Gilbert differential equation (LLG) in combination with the Maxwell equations were solved for three dimensions by considering a linear progression of the magnetisation or polarisation with an external field. The frequency and time dependent polarisation trajectories illustrate how a magnetic moment precesses if effective damping and eddy-currents impacts its motion. For computation, typical parameter values like the saturation polarisation J_s=μ₀·M_s=1.4 T and in-plane uniaxial anisotropy μ₀·H_u=4.5 mT were employed. The main focus of simulation was on the variation of the effective damping parameter α_eff between 0.01 and 0.05 and ferromagnetic film thickness t_m between 200 nm and 1200 nm. The frequency-dependent calculations were carried out between 50 MHz and 6 GHz. The time-dependent simulations were done for a duration between 5 and 30 ns.     

Influence of grain growth on the high-frequency behaviour of ferromagnetic Fe-Co-(M)-N (M=Ta, Hf) nanocomposite films

The CMOS compatible ferromagnetic Fe-Co-(M)-N (M=Ta, Hf) films were investigated with regard to their grain size-dependent frequency behaviour. Predominantly Fe₃₃Co₄₀Ta₁₀N₁₇ films were deposited by reactive r.f. magnetron sputtering. These films were compared to Fe₃₆Co₄₄Hf₉N₁₁ films. In order to induce an in-plane uniaxial anisotropy H_u as well as to investigate the grain growth behaviour, the films were annealed in a static magnetic field. The in-plane uniaxial anisotropy field of around 4 mT as well as a good soft magnetic behaviour with a saturation polarisation of approximately 1.2-1.4 T could be observed after heat treatment. Ferromagnetic resonance frequencies (FMR) of approximately up to 2.4 GHz could be achieved according to the Kittel theory. Depending on the heat treatment, high-frequency losses through energy dissipation was made conspicuous by means of the full-width at half-maximum (FWHM) Δf_eff of the imaginary part of the frequency-dependent permeability which was between 0.4 and 1 GHz. This FWHM was basically discussed in terms of two-magnon scattering theories, in combination with the Herzer random anisotropy model. In order to correlate the resonance line broadening with a phenomenological damping parameter α_eff, which ranged from about 0.0125 to 0.028, the modified Landau-Lifschitz-Gilbert equation was used to fit and describe the permeability spectra of the ferromagnetic films.     

On the relation between the effective ferromagnetic resonance linewidth Δfeff and damping parameter αeff in ferromagnetic Fe-Co-Hf-N nanocomposite films

Ferromagnetic Fe-Co-Hf-N nanocomposite films were investigated concerning their microstructure-dependent frequency behaviour. To modify the composition, the films were deposited by reactive RF magnetron sputtering by using three different 6 in. targets with various Hf fractions. The films were post-annealed up to 600 °C in a static magnetic field to induce an in-plane uniaxial anisotropy and to obtain different crystal sizes. Depending on the annealing temperature, high-frequency losses were investigated by considering the full-width at half-maximum (FWHM) Δf_eff of the imaginary part of the frequency-dependent permeability which showed a resonance frequency f_FMR of 2.3 GHz for an in-plane uniaxial anisotropy field H_u of 4 mT. The FWHM in correlation with the damping parameter α_eff is discussed, e.g., in terms of two-magnon scattering. Damping occurs due to film inhomogeneity in magnetisation and uniaxial anisotropy caused by a magnetocrystalline anisotropy H_a and/or non-magnetic phases. This will result in homogenous or even inhomogeneous resonance line broadening if additional and resonance as well as precession frequencies of independent grains arise.     

Field-induced uniaxial anisotropy in partially ordered Ni3Mn at low temperatures

A uniaxial anisotropy is induced in partially ordered MnNi alloys in the composition range near Ni₃Mn, by applying a magnetic field during cooling from room temperature to 77 K. The uniaxial anisotropy constant K_u depends on both the magnitude of the torque measuring field and that of the cooling field. The easy axis direction tends to be between the 〈100〉 and the direction of the cooling field. The value of K_u shows a maximum when the cooling field is applied along 〈100〉, amounting to 2 × 10⁴ crg/cm³. On the other hand, the crystalline anisotropy is not affected by field cooling. When the temperature is raised from 77 K to 300 K, neither K_u nor the rotational hysterisis loss is observed to have any critical temperature, for a torque measuring field of 20 kOe. As atomic ordering proceeds, these effects become smaller and appear to vanish in the perfectly ordered state.     

Spin-glass behavior and magnetocaloric effect in Tb-based bulk metallic glass

A noncollinear-ferromagnetic spin-glass-like state was observed in Tb₅₅Co₂₀Al₂₅ bulk metallic glass due to the strong random magnetic anisotropy. Associated with this behavior, we observed a comparatively large magnetic entropy change (ΔS_m is 9.75 J K⁻¹ kg⁻¹) in a field change of 7 T and a correspondingly high value of the magnetic refrigeration capacity (RC is 540 J kg⁻¹) with almost no hysteresis loss in the vicinity of the so-called Curie temperature. This opens the possibility of using this material for magnetic cooling purposes.     

Out-of-plane low field anisotropic magnetoresistance in Nd0.51Sr0.49MnO3 thin films

A comparative study of the out-of-plane anisotropic magnetoresistance (AMR) in single crystalline and polycrystalline thin films of phase separated manganite Nd_0.51Sr_0.49MnO₃ has been carried out. On-axis DC magnetron sputtering was used to deposit the single crystalline films (30 and 100 nm in thickness) on single crystal (0 0 1) LaAlO₃ (LAO) and polycrystalline films (100 nm) on (1 0 0) Yttrium-stabilized ZrO₂ (YSZ) substrates. The in-plane and out-of-plane magnetotransport properties of these films differ significantly. A large low field AMR is observed in all the films. AMR shows a peak below the insulator-metal transition temperature in the single crystalline films, while the same increases monotonically in the polycrystalline film. Relatively larger low field AMR (∼20% at T=78 K and H=1.7 kOe) in the polycrystalline films suggests the dominance of the shape anisotropy.     

Analyzing in-plane magnetic anisotropy from surface morphology for amorphous films

A method is developed to analyze the in-plane magnetic anisotropy from surface morphology for amorphous films. The lateral sizes along radial direction (R_RD) and tangent direction (R_TD) of rotational substrate, which are extracted from the surface morphology of Co_66.3Zr_33.7 amorphous films, are used to calculate stress anisotropy energy E_σ. It is found that E_σ is consistent with the magnetic anisotropy energy K_μ for the samples deposited on Si (1 0 0) substrate and then a relationship K_μ ∝ 1/R_RD − 1/R_TD can be obtained. This method is sensitive to the initial state of substrate so its application range is discussed.     

Magnetization reversal in Gd0.67Ca0.33MnO3: Comparison between epitaxial thin films and bulk

Rare-earth-based manganites ABO₃ may present interesting properties when the lanthanide (A-site) and/or the manganese (B-site) are partially substituted by divalent elements. Heavy lanthanides are particularly appealing because of the expected interplay between the intrinsic magnetic properties of the rare-earth element (Ln) and those of the ferromagnetic manganese sublattice. As such, a spin reorientation has been observed during magnetization-versus-temperature cycles due to a negative exchange interaction between Mn and Ln. We present herein high-quality epitaxial thin films (∼200 nm thick) of Gd_0.67Ca_0.33MnO₃ deposited onto (1 0 0) SrTiO₃ substrates by pulsed-laser deposition. Enhanced properties were observed in comparison with bulk samples. The magnetic transition temperature T_c of the as-grown films is much higher than the corresponding bulk values. Most interesting, magnetization measurements performed under small applied fields, exhibit magnetization reversals below T_c, no matter whether the film is field-cooled (FC) or zero-field-cooled (ZFC). The reversal mechanism is discussed in terms of a negative exchange f-d interaction and magnetic anisotropy, this latter enhanced by strain effects induced by the lattice mismatch between the film and the substrate.     

Current induced domain wall motion in nanostripes with perpendicular magnetic anisotropy

We report micromagnetic modeling results of current induced domain wall (DW) motion in magnetic devices with perpendicular magnetic anisotropy by solving the Landau-Lifschitz-Gilbert equation including adiabatic and non-adiabatic terms. A nanostripe model system with dimensions of 500 nm (L)×25 nm (W)×5 nm (H) was selected for calculating the DW motion and its width, as a function of various parameters such as non-adiabatic contribution, anisotropy constant (K_u), saturation magnetization (M_s), and temperature (T). The DW velocity was found to increase when the values of K_u and T were increased and the M_s value decreased. In addition, a reduction of the domain wall width could be achieved by increasing K_u and lowering M_s values regardless of the non-adiabatic constant value.     

Influence of the nitrogen contents on the permeability characteristics and soft magnetic properties of FeHfN films

High permeability magnetic films can enhance the inductance of thin-film inductors in DC-DC converters. In order to obtain high permeability, the uniaxial anisotropy and coercivity should be as low as possible. This study employed dc reactive magnetron sputtering to fabricate nanocrystalline FeHfN thin films. The influence of the nitrogen flow on the composition, microstructure, and permeability characteristics, as well as magnetic properties was investigated. Increasing the nitrogen content can alter FeHfN films from amorphous-like to crystalline phases. The magnetic properties and permeability depend on variations in the microstructure. With the optimum N₂/Ar flow ratio of 4.8% (N₂ flow: 1.2 sccm), low anisotropy (H_K = 18 Oe), low coercivity (H_C = 1.1 Oe) and high permeability (μ′ > 600 at 50 MHz) were obtained for fabrication of a nanocrystalline FeHfN film with a thickness of around 700 nm. Such as-fabricated FeHfN films with a permeability of over 600 should be a promising candidate for high-permeability ferromagnetic material applications.     

Ultrathin (CoFe/Pt)n multilayers with tuned magnetic properties

Perpendicular magnetic anisotropy (PMA) has been investigated in ultrathin (CoFe [0.2] nm/Pt [0.2] nm)_n multilayers. The Pt layers show an fcc crystal structure with a preferred [111] orientation. The multilayers with n=3, 4 show PMA in the as-grown state, which can be enhanced by thermal annealing. However, no PMA is observed in the as-grown state with higher repetitions (n>&=5), although it is observed after thermal annealing. For 1=&<n=&<8, the anisotropy energy is around 10⁵ J/m³ for all (CoFe [0.2]/Pt [0.2])_n stacks. The perpendicular anisotropy is related to layer thickness and interface roughness.     

The microstructure and magnetic properties of electrodeposited Co–Pt thin films on Ru buffer layer

For high-density magnetic recording media, this study examined the crystal structure and the texture of electrodeposited cobalt–platinum (Co–Pt) films on Ru buffer layer. A 15-nm-thick Co–Pt film exhibited very high out-of-plane coercivity and squareness, which were 6248 Oe and 0.89, respectively. The coercivity, H_c, of Co–Pt films grown on Ru buffer layer decreased significantly with increasing thickness, possibly due to the lattice misfit of 5.4% between Co–Pt and Ru, leading to the decrease of perpendicular magnetic anisotropy (PMA) of Co–Pt films as indicated by the observed hexagonal-closed-packed (HCP) (1 1¯ 0 1) plane of Co–Pt films. According to nano beam diffraction pattern (NBDP), however, Co–Pt film grown on Ru layer of HCP exhibited mixed HCP and FCC phases. Also, cross-sectional TEM image suggests that the high PMA may result from the columnar structure of physically isolated Co–Pt grains with the c-axis perpendicular to the film plane.     

Exchange coupling and remanence enhancement in nanocomposite Nd–Fe–B/FeCo multilayer films

Nd–Fe–B-type hard phase single layer films and nanocomposite Nd₂₈Fe₆₆B₆/Fe₅₀Co₅₀ multilayer films with Mo underlayers and overlayers have been fabricated on Si substrates by rf sputtering. The hysteresis loops of all films indicated simple single loops for fixed Nd–Fe–B layer thickness (10 nm) and different FeCo layer thickness (d_FeCo=1–50 nm). The remanence of these films is found to increase with increasing d_FeCo and the coercivity decrease with increasing d_FeCo. It is shown that high remanence is achieved in the nanocomposite multilayer films consisting of the hard magnetic Nd–Fe–B-type phase and soft magnetic phase FeCo with 20 nm?d_FeCo?3 nm. The sample of maximum energy product is 27 MG Oe for d_FeCo=5 nm at room temperature. The enhancement of the remanence and energy products in nanocomposite multilayer films is attributed to the exchange coupling between the magnetically soft and hard phases.     

Magnetic properties of field-annealed FeCo thin films

Fe₅₀Co₅₀ thin films with thickness of 30 and 4 nm have been produced by rf sputtering on glass substrates, and their surface has been observed with atomic force microscopy (AFM) and magnetic force microscopy (MFM); MFM images reveal a non-null component of the magnetization perpendicular to the film plane. Selected samples have been annealed in vacuum at temperatures of 300 and 350 °C for times between 20 and 120 min, under a static magnetic field of 100 Oe. DC hysteresis loops have been measured with an alternating gradient force magnetometer (AGFM) along the direction of the field applied during annealing and orthogonally to it. Samples with a thickness of 4 nm display lower coercive fields with respect to the 30 nm thick ones. Longer annealing times affect the development of a harder magnetic phase more oriented off the film plane. The field applied during annealing induces a moderate magnetic anisotropy only on 30 nm thick films.