High temperature ferromagnetism of the vacuum-annealed (In1−xFex)2O3 powders

(In_1−xFe_x)₂O₃ (x = 0.02, 0.05, 0.2) powders were prepared by a solid state reaction method and a vacuum annealing process. A systematic study was done on the structural and magnetic properties of (In_1−xFe_x)₂O₃ powders as a function of Fe concentration and annealing temperature. The X-ray diffraction and high-resolution transmission electron microscopy results confirmed that there were not any Fe or Fe oxide secondary phases in vacuum-annealed (In_1−xFe_x)₂O₃ samples and the Fe element was incorporated into the indium oxide lattice by substituting the position of indium atoms. The X-ray photoelectron spectroscopy revealed that both Fe²⁺ and Fe³⁺ ions existed in the samples. Magnetic measurements indicated that all samples were ferromagnetic with the magnetic moment of 0.49-1.73 μ_B/Fe and the Curie temperature around 783 K. The appearance of ferromagnetism was attributed to the ferromagnetic coupling of Fe²⁺ and Fe³⁺ ions via an electron trapped in a bridging oxygen vacancy.     

Highly cation-deficient manganese perovskite, La1−xMn1−yO3 with x=y

Oxidative (δ>0) nonstoichiometry in the perovskite ‘LaMnO_3+δ’ has been known to be manifested not with O interstitials but rather with cation vacancies of equal amounts at the two cation sites, La and Mn, i.e. La_1−xMn_1−yO₃ with x=y. Here, we report the fabrication of samples with record-high cation-vacancy concentrations (x>0.12 or δ>0.4) by means of a variety of high-pressure oxygenation techniques. Linear (negative) dependence of the cell volume on x was observed within the whole x range investigated, down to 56.9 Å³ (per formula unit) for a sample oxygenated at 5 GPa and 1100 °C using Ag₂O₂ as an excess oxygen source. With increasing degree of cation deficiency in La_1−xMn_1−xO₃, the ferromagnetic transition temperature was found to follow a bell shape with respect to x exhibiting a maximum of ∼250 K about x≈0.1. For moderately oxygenated samples large magnetoresistance effect was evidenced.     

Improvement in electrical and magnetic properties of mixed Mg-Al-Mn ferrite system synthesized by citrate precursor technique

In the present work, mixed magnesium-manganese ferrites of composition Mg_0.9Mn_0.1Al_0.3Co_zFe_1.7−zO₄ where z=0.3, 0.5 and 0.7 have been synthesized by the citrate precursor technique. X-ray diffraction patterns of the samples confirmed the formation of single-phase spinel structure. The ferrites have been investigated for their electric and magnetic properties such as dc resistivity, Curie temperature, saturation magnetization, initial permeability and relative loss factor (RLF). Fairly constant value of initial permeability over a wide frequency range (0.1-20 MHz) and low values of the relative loss factor of the order of 10⁻⁴-10⁻⁵, in the frequency range 0.1-30 MHz, are the cardinal achievements of the present investigation. In addition to this, initial permeability was found to increase with an increase in temperature while RLF was observed to be low at these temperatures. The dc resistivity and Curie temperature were found to increase with an increase in cobalt content. The mechanisms contributing to these results are discussed in detail in this paper.     

Raman characterization of Pb2Na1−xLaxNb5−xFexO15 and Pb0.5(5−x)LaxNb5−xFexO15 (0≤x≤1) solid solutions

The ferroelectric compounds Pb₂Na_1−xLa_xNb_5−xFe_xO₁₅ and Pb_0.5(5−x)La_xNb_5−xFe_xO₁₅ (0≤x≤1) with the tungsten bronze type structure have been investigated using Raman spectroscopy. The evolution of the spectra as a function of composition at room temperature is reported. In the frequency range 200-1000 cm⁻¹ three main A₁ phonons around 240 (υ₁), 630 (υ₂) and 816 (υ₃) cm⁻¹ were observed. The broadening of the Raman lines for high values of x originates from a significant structural disorder. This is in good agreement with the relaxor character of these compositions. The lowest-frequency part of the spectra, below 180 cm⁻¹, reveals a structural change in the studied solid solutions. The behaviour of the Raman shift of the υ₁ mode confirms that in Pb₂Na_1−xLa_xNb_5−xFe_xO₁₅, a clear anomaly occurs in the vicinity of x=0.4.     

Structure and dielectric properties of (Na0.50Bi0.50)1−xBaxTiO3: 0≤x≤0.10

Solid solution of (1−x)Na_0.5Bi_0.5TiO₃-xBaTiO₃ is investigated in the composition range 0.00≤x≤0.10. It is shown that the system exhibits rhombohedral structure up to x=0.055 and then becomes ‘nearly cubic’ for x≥0.06. Temperature dependent dielectric measurements reveals three peaks in the imaginary part of the dielectric constant for compositions exhibiting rhombohedral as well as ‘nearly cubic’ structures. The first of these three peaks exhibits Vogel-Fulcher type relaxation behaviour.     

Effect of 3d metal ion doping on the structure and superconductivity of (Tl0.5Pb0.5)Sr2CaCu2O7

(Tl_0.5Pb_0.5)Sr₂Ca(Cu_2−xM_x)O₇ (M=Co, Ni and Zn) have been synthesized and investigated by means of X-ray diffraction, scanning electron microscope, electrical resistivity and magnetic susceptibility measurements. X-ray diffraction patterns show that all studied samples contain the nearly single ‘1212’ phase. They crystallize in a tetragonal unit cell with a=3.8028-3.8040 Å and c=12.0748-12.1558 Å. In (Tl_0.5Pb_0.5)Sr₂Ca(Cu_2−xM_x)O₇ system (M=Co or Ni), the superconducting critical temperature T_c decreases linearly with both Co and Ni concentrations and the rate of T_c decrease is around −6.5 and −7.0 K/at%, respectively. For (Tl_0.5Pb_0.5)Sr₂Ca (Cu_2−xZn_x)O₇ system, the dependence of T_c on the Zn dopant concentration deviates from a linear behavior and the Zn substitution suppresses T_c much less (−2.5 K/at%) than the Co and Ni substitutions. The suppression in T_c in Co and Ni doped samples are attributed to the magnetic pair-breaking mechanism and the reduction in the carrier concentration. The suppression of T_c in Zn doped samples is not caused by the reduction in carrier concentration which should remain constant, but rather due to nonmagnetic pair-breaking mechanism induced by disorder as well as the filling of the local Cu d_x²−y² state due to the full d band of Zn ions.     

Effect of Sm,Co codoping on the dielectric and magnetoelectric properties of BiFeO3 polycrystalline ceramics

Multiferroic Bi_0.95Sm_0.05Fe_1−xCo_xO₃ (x=0−0.1) ceramics were prepared by the rapid liquid phase sintering method. For all the samples studied, the dielectric constant and dielectric loss decrease with increasing frequency in the range from 1 kHz to 1 MHz. It shows that the dielectric constant of Bi_0.95Sm_0.05FeO₃ at 10 kHz is about forty times larger than that of pure BiFeO₃. This dramatic change in the dielectric properties of Bi_0.95Sm_0.05Fe_1−xCo_xO₃ (x=0−0.1) samples can be understood in terms of the space charge limited conduction associated with crystal defects, which was indicated by the increase of magnetoelectric effect with doping Co³⁺ under applied magnetic field from 1 to 8 kOe. It was believed that the ferroelectric polarization enhancement comes from the exchange interaction between the Sm³⁺ and Fe³⁺ or Co³⁺ ions for Bi_0.95Sm_0.05Fe_0.95Co_0.05O₃ at room temperature.     

Neutron powder diffraction study of the Nd(Ba1−xNdx)2Cu3O7+δ solid solution

The Nd(Ba_1−xNd_x)₂Cu₃O_7+δ solid solution, Nd123ss, has been investigated by neutron powder diffraction and Rietveld analysis. It is confirmed that the crystal structure of its Nd-rich limit, Nd(Ba_0.55Nd_0.45)₂Cu₃O_7.33, is satisfactorily described in the space group Bmmm (a=7.7679(3), b=3.8542(1), and c=22.9590(9) Å). The fourfold superstructure with respect to the orthorhombic cell of YBCO is due to ordering between Ba and Nd atoms in the bridging layer. Differences with previous works concern exclusively the distribution of O atoms in the ‘chain’ layer. Our results give strong indications that ordering also occurs for lower Nd contents.     

Experimental investigation of long-wavelength optical lattice vibrations in quaternary AlxInyGa1−x−yN alloys and comparison with results from the pseudo-unit cell model

Raman and Fourier transform infrared (FTIR) spectroscopies have been utilized to measure long-wavelength optical lattice vibrations of high-quality quaternary Al_xIn_yGa_1−x−yN thin films at room temperature. The Al_xIn_yGa_1−x−yN films were grown on c-plane (0 0 0 1) sapphire substrates with AlN as buffer layers using plasma assisted molecular beam epitaxy (PA-MBE) technique with aluminum (Al) mole fraction x ranging from 0.0 to 0.2 and constant indium (In) mole fraction y=0.1. Pseudo unit cell (PUC) model was applied to investigate the phonons frequency, mode number, static dielectric constant, and high frequency dielectric constant of the Al_xIn_yGa_1−x−yN mixed crystals. The theoretical results were compared with the experimental results obtained from the quaternary samples by using Raman and FTIR spectroscopies. The experimental results indicated that the Al_xIn_yGa_1−x−yN alloy had two-mode behavior, which includes A₁(LO), E₁(TO), and E₂(H). Thus, these results are in agreement with the theoretical results of PUC model, which also revealed a two-mode behavior for the quaternary nitride. We also obtained new values of E₁(TO) and E₂(H) for the quaternary nitride samples that have not yet been reported in the literature.     

Structure, electric and dielectric studies of indium-substituted magnesium copper manganese ferrites

The structure, electric and dielectric properties of In-substituted Mg-Cu-Mn ferrites having the general formula of Mg_0.9Cu_0.1Mn_0.1In_xFe_1.9−xO₄ with 0.0≤x≤0.4 have been studied. X-ray diffraction (XRD) patterns of the samples indicated the formation of single-phase cubic spinel structure up to 0.2 and mixed phase (cubic and tetragonal phase) for samples x≥0.3. The relation of conductivity with temperature revealed a semiconductor to semimetal behavior as In⁺³ concentration increases. Variation in the universal exponent s with temperature indicates the presence of two hopping conduction mechanisms: the correlated barrier hopping (CHB) at low In⁺³ content x≤0.1 and small-polaron (SP) hopping at In⁺³ content x≥0.2. The variation in dielectric permittivity (ε′, ε″) with temperature at different frequencies shows a normal behavior for the studied compounds, while the variation in dielectric loss tangent with frequency at different temperatures shows abnormal behavior with more than relaxation peak. The conduction mechanism used in the present study has been discussed in the light of electron exchange between Fe³⁺ and Fe²⁺ ions and hole hopping between Mn²⁺ and Mn³⁺ ions at the octahedral B-sites.     

Simulation of Al/Fe disorder in Ca2FexAl2−xO5

A method is described which is capable of simulating disorder across a range of composition. It is used to study the disorder of iron and aluminium on the octahedral and tetrahedral cation sites in the Brownmillerite phase Ca₂Fe_xAl_2−xO₅. The arrangements with the lowest lattice energies are those that maximize the number of Fe³⁺ on octahedral sites throughout the composition range. An exchange of one Fe³⁺ with one Al³⁺, which results in a decrease in the number of iron ions on octahedral sites, increases the lattice energy by an amount that is dependent on x but is independent of the number of exchanges. The exchange of trivalent cations also results in an expansion in the b lattice direction, accompanied by a decrease in the a and c directions across the full range of composition.     

Reentrant spin glass behavior and large initial permeability of Co0.5−xMnxZn0.5Fe2O4

A series of polycrystalline ferrites having nominal chemical composition Co_0.50−xMn_xZn_0.5Fe₂O₄ (0<x<0.4) have been synthesized by the solid-state reaction technique. The XRD analysis confirms single phase cubic spinel structure for all compositions. Lattice constant increases from 0.84195 to 0.84429 nm with the increasing Mn content and obeys Vegard's law. The average grain size increases by increasing both Mn content and sintering temperatures. Room temperature saturation magnetization increases for x=0.1 and decreases for increasing Mn content. The coercivity decreases with increasing Mn content due to the decrease of anisotropy constant. A reentrant spin glass behavior of these samples is observed from the zero field cooled magnetization measurements. The real part of the initial permeability increases by increasing both Mn content and sintering temperatures. This is due to the homogeneous grain growth and densification of the ferrites. The highest initial permeability 137 is observed for x=0.4 sintered at 1573 K on the other hand, the highest relative quality factor (2522) is obtained for the sample Co_0.2Mn_0.3Zn_0.5Fe₂O₄ sintered at 1523 K. The Mn substituted Co_0.50−xMn_xZn_0.5Fe₂O₄ ferrites showed improved magnetic properties.     

Structural, magnetic properties and magnetostriction studies of Sm1−xNdxFe1.55 alloys

Structural, magnetic properties and magnetostriction studies of Sm_1−xNd_xFe_1.55 (0≤x≤0.56) alloys have been performed. X-ray diffraction analysis confirms the presence of single cubic Laves phase in Sm_1-xNd_xFe_1.55 alloys with 0≤x≤0.48. The lattice parameter of alloys increases linearly with increase in Nd content while the Curie temperature behaves in the opposite way. The alloy x=0.08 exhibits a giant magnetostriction value (λ_∥-λ_⊥) of −2187 ppm at a magnetic field of 12 kOe due to the anisotropy compensation between Sm³⁺ and Nd³⁺ ions.     

Structural and photoluminescence properties of thermally evaporated Cd1−xMnxS nano-crystalline films

Thin films of Cd_1−xMn_xS (0≤x≤0.5) were formed on glass substrates by resistive vacuum thermal evaporation. All the films were deposited at 300 K and the films were annealed at 373, 473 and 573 K for 1 h in a vacuum of 10⁻⁶ mbar. Atomic force microscopy (AFM) studies showed that all the films investigated were in nano-crystalline form with a grain size in the range 36-82 nm. All the films exhibited a wurtzite structure of the host material. The lattice parameters varied linearly with composition following Vegard’s law in the entire composition range. Photoluminescence studies showed that two distinct emission bands were observed for each Cd_1−xMn_xS compound. One corresponds to internal transition and the other one is due to the transition of Mn²⁺ ions in interstitial sites or in small ‘Mn’ chalcogenic clusters.     

Magnetic,electronic and structural properties of ZnxFe3−xO4

A series of samples Zn_xFe_3−xO₄ have been prepared by the chemical coprecipitation technique and characterized by X-ray diffraction (XRD), vibrating sample magnetometry (VSM) and X-ray photoelectron spectroscopy (XPS). XRD demonstrates all the samples of Zn_xFe_3−xO₄ have a spinel structure same as Fe₃O₄. The magnetic hysteresis loops of Zn_xFe_3−xO₄ obtained from VSM indicate that the saturation magnetization has a maximum when x is ∼1/3. The chemical states of Fe atoms and Zn atoms in zinc ferrites have been measured using XPS and Auger electron spectroscopy (AES). The Fe 2p core-level XPS spectra and Zn L₃M₄₅M₄₅ Auger peaks have been analyzed and the results have been discussed in correlation with the samples’ magnetic properties. These results suggest most of Zn atoms occupy the tetrahedral sites and a small amount of them occupy the octahedral sites.     

Study of (Bi2O3)(BaxMo1−xO3) polycrystalline ceramic as relaxor ferroelectric

Solid solutions of bismuth layered (Bi₂O₃)(Ba_xMo_1−xO₃) (0.2≤x≤0.8, x is in step of 0.2) ceramics were prepared by conventional solid-state reaction of the constitutive oxides at optimized temperatures with a view to study its electrical properties. Powder X-ray diffraction has been employed for physical characterization and an average grain size of ∼16 to 22 nm was obtained. XRD study reveals the single phase structure of the samples. Dielectric properties such as dielectric constant (ε′), dielectric loss (tanδ) and ac electrical conductivity (σ_ac) of the prepared ceramics sintered at various temperatures in the frequency range 10¹–10⁷ Hz have been studied. A strong dispersion observed in the dielectric properties shows the relaxor type behavior of the ceramic. The presence of maxima in the dielectric permittivity spectra indicates the ferroelectric behavior of the samples. Impedance plots (Cole–Cole plots) at different frequencies and temperatures were used to analyze the electric behavior. The value of grain resistance increases with the increase in Ba ion concentration. The conductivity mechanism shows a frequency dependence, which can be ascribed to the space charge mainly due to the oxygen vacancies. The relaxation observed for the M″ (ω) or Z″ (ω) curves is correlated to both localized and long range conduction. A single ‘master curve’ for the normalized plots of all the modulus isotherms observed for a given composition indicates that the conductivity relaxation is temperature independent.     

Li0.5Fe2.5−xMnxO4 ferrite sintered from microwave-induced combustion

Li_0.5Fe_2.5−xMn_xO₄ (0≦x≦1.0) powders with small and uniformly sized particles were successfully synthesized by microwave-induced combustion, using lithium nitrate, ferric nitrate, manganese nitrate and carbohydrazide as the starting materials. The process takes only a few minutes to obtain as-received Mn-substituted lithium ferrite powders. The resultant powders annealed at 650 ^°C for 2 h and were investigated by thermogravimeter/differential thermal analyzer (TG/DTA), X-ray diffractometer (XRD), transmission electron microscopy (TEM), vibrating sample magnetometer (VSM), and thermomagnetic analysis (TMA). The results revealed that the Mn content were strongly influenced the magnetic properties and Curie temperature of Mn-substituted lithium ferrite powder. As for sintered Li_0.5Fe_2.5−xMn_xO₄ specimens, substituting an appropriate amount of Mn for Fe in the Li_0.5Fe_2.5−xMn_xO₄ specimens markedly improved the complex permeability and loss tangent.     

Tailoring of structural, electrical and magnetic properties of BaCo2 W-type hexaferrites by doping with Zr-Mn binary mixtures for useful applications

Single-phase W-type hexaferrite, BaCo₂Fe_16−2x(ZrMn)_xO₂₇ (x=0.0-1.0), has been synthesized by the chemical co-precipitation technique. Mössbauer analysis indicates substitution of Zr ions on tetrahedral (4e and 4f_IV) sites and Mn ions on the octahedral ‘4f_VI site’ at low-doped concentration when the concentration is increased Mn ions but show preference for the octahedral ‘2b site’. The highest enhancement in the value of the room temperature resistivity of 2.82×10⁹ Ω cm has been obtained by doping with Zr-Mn content of x=0.6. The dissipation factor increases from 6.49×10³ to 9.97×10³ at 10 kHz with the addition of Zr-Mn dopants. Such materials are potentially suitable for electromagnetic attenuation purposes, for microwave absorption and as radar absorbing material. High values of saturation magnetization (67 emu/g) and remanent magnetization (34.7 emu/g) are obtained for substitution level of x=0.4 making them suitable for data processing devices.     

Mn1−xFexIn2Se4: a new layered semiconductor system

Mn_1−xFe_xIn₂Se₄ compounds (x=0.1; x=0.7) were grown by the chemical vapor transport method. X-ray diffraction analysis data show that these compositions crystallize as different polytypes that belong to the hexagonal structure. The crystal symmetry of the sample with x=0.1 belongs to the space group Rm and for the sample with x=0.7 the space group is P6₃mc.The magnetic behavior of both samples has been investigated in the temperature range between 5 and 300 K. Spin-glass-like behavior below the freezing temperature T_f=9 K has been found for the sample with x=0.7. The sample with Fe content x=0.1 behaves as a paramagnet down to the lowest experimental measured temperature. High-temperature susceptibility data follow the Curie-Weiss law with a negative paramagnetic temperature indicating predominant antiferromagnetic interactions.Optical studies reveal that both samples (x=0.1; 0.7) are direct band gap semiconductors. The temperature dependence of the energy gap fits Varshni relation quite well.     

Synthesis and characterization of room-temperature ferromagnetism in Fe- and Ni-co-doped In2O3

Observation of room-temperature ferromagnetism in Fe- and Ni-co-doped In₂O₃ samples (In_0.9Fe_0.1−xNi_x)₂O₃ (0?x?0.1) prepared by citric acid sol-gel auto-igniting method is reported. All of the samples with intermediate x values are ferromagnetic at room-temperature. The highest saturation magnetization (0.453 μ_B/Fe+Ni ions) moment is reached in the sample with x=0.04. The highest solubility of Fe and Ni ions in the In₂O₃ lattice is around 10 and 4 at%, respectively. The 10 at% Fe-doped sample is found to be weakly ferromagnetic, while the 10 at% Ni-doped sample is paramagnetic. Extensive structure including Extended X-ray absorption fine structure (EXAFS), magnetic and magneto-transport including Hall effects studies on the samples indicate the observed ferromagnetism is intrinsic rather than from the secondary impurity phases.