MoS2非贵金属电催化剂担载对p-InP光阴极分解水性能的影响

将MoS₂电催化剂担载在InP光阴极表面,提升了InP光阴极光电化学分解水产氢性能,确定了最优的MoS₂电催化剂担载电量为15mC·cm^-2;在担载前后,开启电势由-100mV移动至120mV;在-0.35VvsRHE时,电流密度由15mA·cm^-2提升至43mA·cm^-2。另外,通过改变入射光强和加入电子牺牲剂的方法进一步研究了MoS₂担载InP光阴极产氢反应的限制步骤为光生电子与空穴在InP表面的复合。     

碳球担载二硫化钴纳米复合电催化剂的制备及其析氢性能研究

采用一步水热法,通过引入载体碳球(CSs)和表面活性剂CTAB,将二硫化钴(CoS_2)纳米颗粒均匀负载在CSs表面.相比于单独的CoS_2,改性后CSs担载的CoS_2(CoS_2/A-CSs)展现出了更好的电催化活性.在电解液为0.5mol/L H_2SO_4溶液中,电流密度为10 mA·cm~(-2)条件下,其析氢反应过电位仅为154 mV.经过12 h的稳定性测试,CoS_2/A-CSs析氢反应过电位为180 mV,这表明其仍具有良好的电化学催化析氢反应活性.这种复合电催化剂的优良性能主要归因于CSs的高导电性和其对CoS_2纳米颗粒的均匀分散;此外,CTAB的引入,促使CSs与CoS_2之间结合的更加紧密,进而加快了活性位点间的电子传导.     

脲醛树脂衍生的含氮碳层包覆的磷掺杂碳化钨(P-W2C@NC)全pH析氢催化剂

碳化钨由于其具有独特的类Pt电子结构和催化性能,使得其在电催化析氢领域吸引广泛关注。杂原子掺杂以及构筑高比表面积的碳化钨纳米材料是进一步提升其性能的重要策略。本研究以表面含有丰富极性官能团的脲醛树脂作为基底,在其支链骨架上均匀固载多酸阴离子簇,通过可控碳化获得了具有高比表面积的杂原子掺杂的碳化钨(P-W2C@NC)全pH析氢催化剂。该材料的BET比表面积高达136 m2 g-1。XRD、XPS、SEM和TEM表征证明催化剂是由含有磷掺杂的碳化钨纳米颗粒和包覆在碳化钨颗粒表面的薄层氮掺杂碳层共同构成。P-W2C@NC在全pH值电解液都具有高效的析氢性能,在0.5 M硫酸、1 M氢氧化钾和0.1 M磷酸缓冲液中,分别仅仅需要过电位83 mV、63 mV和179 mV就可以达到电流密度10 mA cm-2,并且具有超过20 h的长期催化稳定性。     

石墨烯纳米片担载Pt-Pd双金属纳米球作为甲醇氧化的电催化剂(英文)

利用简便的无表面活性剂的方法合成了石墨烯担载的Pt-Pd双金属纳米球.首先由Na2PdCl4与氧化石墨烯发生氧化还原反应生成Pd晶种,然后诱导Pt纳米粒子的生长,得到Pt-Pd双金属纳米球.采用扫描电子显微镜、透射电子显微镜和X射线粉末衍射仪表征了合成的Pt-Pd/GR催化剂的结构,并测定了其作为甲醇氧化电催化剂的性能.结果表明,Pt-Pd/GR催化剂对甲醇氧化反应表现出高催化活性和稳定性,甲醇氧化电流密度为51.8mA·cm-2.     

Sn/Cu电极电化学还原CO2的研究

采用电沉积法制备Sn/Cu电极,由SEM观察并研究了电沉积电流密度对电极形貌的影响.在碱性三电极体系中考察了Sn/Cu电极对析氢、CO2还原的影响.发现10 mA.cm-2和15 mA.cm-2电沉积电流密度下制得的电极活性较高,尤以15 mA.cm-2时电极性能更佳,并指出了电还原CO2关键材料的结构特性.     

TiO_2纳米管双室光电化学池光催化制氢的研究

以阳极氧化法在纯钛表面制备了高度有序的Ti O2纳米管阵列,并通过SEM观察其表面形貌。采用双室光电化学池制氢体系,利用太阳光照Ti O2产生的光电压与双室电解液p H差产生的化学偏压的协同效应,不施加外加电压,可直接在阴极室还原制取氢气。通过在碱性电解液中添加乙二醇为电子给体,将光解水制氢与有机物的降解耦合为一体,提高太阳能的利用率,同时考察了阳极室电解液中添加不同含量乙二醇对Ti O2纳米管光阳级的光电化学性能及产氢量的影响。实验结果表明,乙二醇的添加降低了光生电子-空穴对的复合几率,使Ti O2纳米管的光电流、光电压、产氢量得到显著提高。当添加乙二醇的浓度为10vol%时光电流达到13.7 m A·cm-2,无外加电压条件下,双室光电化学池中的产氢速率最高达到3.8μmol·min-1·cm-2。     

C_3N_4-Ti_4O_7-MoS_2复合催化剂界面效应增强电催化析氢性能（英文）

电催化水裂解是目前最有前景的制氢技术之一。二硫化钼(MoS_2)作为最有前途的非贵金属电解水制氢催化剂之一,受有限的催化位点和弱电导率的困扰,迫切地需要被进一步优化。本文采用简单的水热方法构建了C_3N_4-Ti_4O_7-MoS_2异质催化剂,利用活性组分间的界面相互作用,实现了催化剂活性位点的高度暴露、表面电荷的再分布、氢吸附动力学和稳定性的优化,改进了MoS2的电催化析氢性能。结果表明,界面效应赋予C_3N_4-Ti_4O_7-MoS_2催化剂优异的电催化活性,即300 mV的过电位下获得50 mA/cm~2的电流密度以及较低的Tafel斜率(54 mV/dec),长达33 h的析氢反应后仍保持高的催化活性,其电催化析氢性能优于纯MoS_2。结果表明,界面效应作为一种合理改进MoS_2基电催化剂的策略,对开发新型高效制氢电催化剂的发展至关重要。     

多孔Ni、Ni-Mo合金及其氧化物的制备与析氢性能

采用快速凝固结合脱合金化的方法制备了纳米多孔Ni、Ni-Mo合金及其氧化物电极材料,通过XRD、SEM、TEM、BET等对电极的物相、形貌结构、孔径分布进行表征,通过线性扫描伏安法、Tafel斜率和计时电位等方法测试多孔电极的电催化析氢性能。结果显示,制备的电极材料在10 mA·cm-2电流密度下Ni-Mo合金析氢活性最强,析氢过程由Volmer-Heyrovsky步骤控制,其表观交换电流密度为0.25 mA·cm-2,经10 000 s恒电流密度(100 mA·cm-2)电解后析氢过电位(η)仅增加39 mV,表现出优良的析氢稳定性。Ni-Mo合金电极比表面积的提高和本征催化活性的改善使其获得了更低的析氢过电位。     

YSZ传导膜H_2S固体氧化物燃料电池

研究了Y2O3稳定的ZrO2(YSZ)氧离子传导膜H2S固体氧化物燃料电池性能。掺杂NiS、电解质、Ag粉和淀粉制备了双金属复合MoS2阳极催化剂,掺杂电解质、Ag粉和淀粉制备了复合NiO阴极催化剂,用扫描电镜对YSZ和膜电极组装(MEA)进行了表征,比较了不同电极催化剂的性能和极化过程,考察了不同温度对电池性能的影响。结果表明,双金属复合MoS2/NiS阳极催化剂在H2S环境下比Pt和单金属MoS2催化剂稳定,复合NiO阴极催化剂比Pt性能好,在电极催化剂中加入Ag可显著提高电极的导电性;与Pt电极相比,复合MoS2阳极和复合NiO阴极催化剂的过电位较小,阳极的极化比阴极侧小;温度升高,电池的电流密度与功率密度增加,电化学性能变好。在750℃、800℃、850℃和900℃及101.13 kPa时,结构为H2S、(复合MoS2阳极催化剂)/YSZ氧离子传导膜/(复合NiO阴极催化剂)、空气的燃料电池最大功率密度分别为30 mW/cm2、70 mW/cm2、155 mW/cm2及295 mW/cm2、最大电流密度分别为120 mA/cm2、240 mA/cm2、560 mA/cm2和890 mA/cm2。     

镍基金属有机框架衍生的双功能电催化剂用于析氢和析氧反应（英文）

开发高活性、低成本的析氢反应和析氧反应电催化剂对于能源的可持续发展至关重要。金属有机框架衍生的纳米材料已经成为一类非常有前景的非贵金属双功能电催化剂,但是目前对镍基金属有机框架衍生的双功能电催化剂的深入研究并不全面,其催化活性和稳定性还有待进一步提高。本文制备了一种棒状多孔碳负载镍纳米颗粒的新型电催化剂,并将其用作电催化析氢和析氧反应。实验研究结果表明该类电催化剂表现出优异的析氢和析氧反应活性和长期稳定性,在10 mA·cm~(-2)的电流密度下,析氢反应和析氧反应的过电位分别为120和350 mV。我们认为:材料可控的纳米结构和均匀分布的活性位点共同提升了复合材料的电催化性能。     

Near infrared study of aqueous rare-earth ethylsulfates

The near infrared spectra of aqueous solutions of the ethylsulfates of La, Nd, Gd, Tb, Er, Yb, Lu, Y, and Na have been determined from about 0.2 mol-dm^–3 to nearly saturation. The extinction coefficients of water have been calculated taking into account the absorption of ethylslfate anions determined in separate experiments. Their values appeared to be nearly the same as that of pure water. The relative contents of free OH groups in 0.5 and 0.7M solutions have been estimated from the absorbances at 1160 nm. They were lower in solutions of the heavy rare-earth ethylsulfates (Tb, Er, Yb, Lu) than in equimolar solutions of the lighter ones (La, Nd), confirming our previous view that secondary hydration of the heavy trivalent rare-earth cations is distinctly stronger than that of the lighter ones. A comparison of the spectra of these aqueous ethylsulfates with those of perchlorates shows that the structure-breaking ability of the C₂H₅SO ₄ ^– ion is much smaller than that of perchlorate anion.     

Microstructures of Some Bi-W-Nb-O Phases

Microstructures of three Bi-W-Nb-O phases have been examined by using high-resolution transmission electron microscopy. Bi₁₇W₂Nb₃O₃₉ and Bi₁₇WNb₃O₃₆ have incommensurate superstructures derived from the defect fluorite-type δ-Bi₂O₃ and can be regarded as intermediate phases between the type II solid solutions in the Bi-Nb-O and Bi-W-O systems. Bi₈W₂Nb₂O₂₃ has a Bi₂WO₆-like subunit cell with a stepped superstructure. Formation mechanisms of various superstructures are discussed.     

Reactivity of Binary Mixtures of La(III) Oxide and Cu(II) Oxalate or Nitrate and Synthesis of La(III) Cuprate

Reactivity of mixtures of La(III) oxide and Cu(II) oxalate/nitrate in hydrated as well as anhydrous state was studied using TG, DTA and XRD. Cu(II) oxide formed in the endothermic decomposition of mixture containing hydrated Cu(II) nitrate and La(III) oxide could not form La₂CuO₄ while Cu(II) oxide formed in the exothermic decomposition of mixture containing hydrated/anhydrous Cu(II) oxalate and La(III) oxide reacts with La(III) oxide and develops the phases CuLaO₃ and La₂CuO₄. The maximum reactivity with respect to the formation of La₂CuO₄phase was observed in mixture containing anhydrous Cu(II) oxalate. This revised version was published online in July 2006 with corrections to the Cover Date.     

Preparation of ZrO2-TiO2-CeO2 and Its Application in the Selective Catalytic Reduction of NO with NH3

TiO₂,ZrO₂-TiO₂,andZrO₂-TiO₂-CeO₂ were prepared by co-precipitation method and characterized by X-ray diffraction (XRD), specific surface area measurements (BET), temperature programmed desorption (NH₃-TPD), oxygen storage capacity (OSC), and temperature programmed reduction (H₂-TPR). The results showed that ZrO₂-TiO₂-CeO₂ exhibited large number of surface strong acid, possessed some oxygen storage capacity, and strong redox property. The three materials were used as supports and the monolith catalysts were prepared with 1% (w) V₂O₅ and 9% (w)WO₃ for selective catalytic reduction (SCR) of NO with ammonia in the presence of excessive O₂, and the results of catalytic activity showed that the catalyst used ZrO₂-TiO₂-CeO₂ as support yielded nearly 100% NO conversion at 275 °C at a gas hourly space velocity (GHSV) of 10000 h⁻¹, and it had the best catalytic activity and showed great potential for practical application.     

电感耦合等离子体光谱法测定铜冶炼烟尘中锌

本实验介绍了电感耦合等离子体光谱法测定铜冶炼烟尘中锌含量的分析方法。针对样品碳,硅含量高的特点,有针对性的研究了样品的消解方法,确定采用盐酸、硝酸、氢氟酸、高氯酸对铜冶炼烟尘样品进行消解。同时进行了干扰试验,确定样品中高含量的铜,铅,砷等对样品测定结果没有影响。并对仪器的工作参数进行了优化。方法检出限为为0.011 mg/L,测定下限为0.019 mg/L,3个样品的相对标准偏差在0.54%~0.92%之间,加标回收率在96%~101.14%之间。该方法样品消解完全,流程短,操作简单,快速,测定准确度高,可以满足铜冶炼烟尘中锌含量的测定。     

电感耦合等离子体光谱法(ICP-AES)测定银精矿中铜、铅、锌、砷、镉、钙、镁、锰含量

针对银精矿样品复杂,难消解的特点,研究了不同酸溶法和碱熔法对样品的消解情况,建立了硝酸,盐酸,氢氟酸,高氯酸消解银精矿的方法。根据元素灵敏度和抗干扰性,选定各元素的测定波长。通过酸溶样和碱熔样测定结果比对,验证了方法准确性。建立了四酸消解-电感耦合等离子体光谱法测定银精矿中铜、铅、锌、砷、镉、钙、镁、锰含量的方法,元素的线性相关系数均在0.9999以上。通过共存元素干扰实验,确定了银精矿中高含量元素(铜、铅、锌、铁、锑、铋等)对测定元素结果没有影响。方法检出限：Cu 0.0063 mg/L, Pb 0.0159 mg/L ,Zn 0.0090 mg/L,As 0.0192 mg/L, Cd 0.0093 mg/L ,Ca 0.0084 mg/L, Mg 0.0075 mg/L, Mn 0.0081 mg/L。测定下限：Cu 0.0105mg/L,Pb 0.0265 mg/L, Zn 0.0150 mg/L, As 0.0320 mg/L, Cd 0.0155 mg/L, Ca 0.0140 mg/L, Mg 0.0125 mg/L,Mn 0.0135 mg/L。3个样品的相对标准偏差在0.87%~3.56%之间,加标回收率在95.00%~103.56%之间。方法流程短,操作简单,快速,灵敏度和再现性高,结果准确可靠,可以满足银精矿中铜、铅、锌、砷、镉、钙、镁、锰含量的测定。     

Li_(1.3)Ti_(1.7)Al_(0.3)(PO_4)_3,Na_(1.3)Ti_(1.7)Al_(0.3)(PO_4)_3的离子交换研究

研究了在不同温度下的NaNO3和AgNO3水溶液中Li1.3Ti1.7Al0.3(PO4)3和Na1.3Ti1.7Al0.3(PO4)3离子交换行为.实验表明Li1.3Ti1.7Al0.3(PO4)3和Na1.3Ti1.7Al0.3(PO4)3均显示出了高选择性与Na+和Ag+进行离子交换的特征,且对Ag+的选择性高于Na+.升高温度可显著提高Ag/Li和Ag/Na的交换反应速度.     

Reactivity of Zn3V2O8 Towards ZnMoO4 in the Solid State

The reactivity of Zn₃ V₂ O₈ towards ZnMoO₄ was investigated by using DTA and XRD methods. A new compound of the formula Zn_2.5 VMoO₈ was found. It crystallises in an orthorhombic system. The melting temperature was determinated to be 845±5°C. This revised version was published online in August 2006 with corrections to the Cover Date.     

α-Fe2O3掺杂对In2O3电导和气敏性能的影响

用化学共沉淀法制备了α Fe2O3掺杂的In2O3纳米晶微粉,研究了α Fe2O3掺杂对In2O3电导和气敏性能的影响. 结果表明, α Fe2O3和In2O3间可形成有限固溶体In2－xFexO3(0≤x≤0.40); Fe3＋对In2O3晶格中In3＋格位的部分取代,大大增强了阴阳离子间的结合力,导致材料中氧空位VO×数骤降、 自由电子的浓度变稀和电导下降. n(Fe3＋):n(In3＋)=5 :5的共沉淀粉于800 ℃下灼烧4 h所得的α Fe2O3掺杂In2O3传感器元件,对45 μmol•L－1 C2H5OH的灵敏度达54.0,为相同浓度干扰气体汽油的8倍多.     

Near infrared study of aqueous lanthanide perchlorates

The near infrared spectra of water in aqueous solutions of La(ClO₄)₃, Pr(ClO₄)₃, Nd(ClO₄)₃, Gd(ClO₄)₃, Er(ClO₄)₃, Yb(ClO₄)₃, Lu(ClO₄)₃, and NaClO₄ have been measured in the concentration range from 0.3 to 2.5 mol-dm^–3, at 25°C. The relative contents of free OH groups in the 1.0, 1.6, and 2.2M solutions have been calculated from extinction coefficients for water at 1160 nm. They increase with increasing salt concentration and are greater in solutions of the lighter lanthanide perchlorates at any fixed molarity. The results are discussed in terms of the stoichiometry and structure of hydrated cations of trivalent lanthanides.