NMR analysis and triad sequence distributions of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)

Polyhydroxyalkanoates (PHAs) are considered promising “green” alternatives to synthetic polymers because they are bio-derived, biodegradable and biocompatible. The properties of bacterial PHA copolymers depend on their microstructures, which can be modified with the use of different fermentation processes and feed materials. Thus, it is desirable to have an improved testing method for the determination of PHA microstructures. In this work, a detailed NMR analysis of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) microstructure was made. Previously only two of the hydroxyvalerate ¹³C NMR peaks have been assigned at the triad level. In this work, three of the ¹³C hydroxyvalerate peaks and two of the hydroxybutyrate peaks were found to be split into four peaks each due to comonomer sequence effects. Using eight copolymer samples with a wide compositional range, we were able to assign all these peaks to B-centered and V-centered triad sequences. Through curve deconvolution, the triad intensities were determined. These triad sequence intensities can then be analyzed via both the first-order Markovian and two-component Bernoullian models to obtain more in-depth information on copolymer composition and comonomer reactivities.     

Novel biodegradable ester-based polymer blends

We have found, within the polyester family, interesting and potentially useful patterns of three-component compatibility. The bacterially produced biodegradable polyester, poly(hydroxybutyrate) (PHB) and its copolymers with hydroxyvalerate (HV) together with polymers such as cellulose acetate butyrate (CAB), polycaprolactone, poly(lactic acid), and a series of high-molecular-weight, non-crystallizable ester-based plasticisers have been identified as possible candidates in the production of blends in which aspects of performance can be varied with a degree of independence of cost. The compatibility ranges can be conveniently represented in the form of triangular graphs, with the relative weight fraction, or percentage, being represented along each of the three axes. The extent to which the modulation of the physical properties in general, but the stability in various environments in particular, is possible by the formation of three-component blends, such as those formed between P(HB-HV), cellulose acetate butyrate and poly(alkylene adipate) plasticisers, is discussed.     

Birefringence control for binary blends of cellulose acetate propionate and poly(vinyl acetate)

Structure and optical properties for binary blends composed of biomass-based cellulose acetate propionate (CAP) and poly(vinyl acetate) (PVAc) have been studied. It is found that the blends exhibit high level of transparency, although the dynamic mechanical analysis in the solid state suggests that phase separation occurs in the blend. Furthermore, the birefringence resulting from molecular orientation decreases with increasing the content of PVAc. In particular, the blend with approximately 50 wt% of PVAc exhibits no birefringence even after stretching.     

The influence of process parameters on the characteristics of polyhydroxyalkanoates produced by mixed cultures

The characterization of polyhydroxyalkanoates (PHA) produced by mixed cultures is fundamental for foreseeing the possible final applications of the polymer. In this study PHA produced under aerobic dynamic feeding (ADF) conditions are characterized. The PHA produced shows a stable average molecular weight ([symbol: see text]) in the range (1.0-3.0) x 10(6), along three years of reactor operation. Attempts to improve the amount of PHA produced did not introduce significant variations on the values [symbol: see text]. Along this period, the polydispersity indices (PDI) were between 1.3 and 2.2. The use of different carbon sources allowed the tailoring of polymer composition: homopolymers of poly(3-hydroxybutyrate), P(3HB), were obtained with acetate and butyrate, whereas a mixture of acetate and propionate, and propionate and valerate, gave terpolymers of 3-hydroxybutyrate (3HB), 3-hydroxyvalerate (3HV), and 2-methyl-3-hydroxyvalerate (2M3HV). All of these PHA had [symbol: see text] between 2.0 x 10(6) and 3.0 x 10(6). Thermal characterization of the produced polymers showed values of glass transition temperature, melting temperature, melting enthalpy, and crystallinity slightly lower than those obtained for PHA from pure cultures. The introduction of a purification step during the polymer extraction process allowed the elimination of possible contaminants but did not significantly improve the polymer quality.     

Transparent polymer blends composed of cellulose acetate propionate and poly(epichlorohydrin)

Structure and properties for binary blends composed of biomass-based cellulose acetate propionate (CAP) and poly(epichlorohydrin) (PECH) have been studied. It is found from the dynamic mechanical measurements that mutual dissolution takes place to some degree with remaining CAP-rich and PECH-rich regions in the blends. As a result of the interdiffusion, leading to fine morphology, the blends exhibit high level of optical transparency although the individual pure components have different refractive index. Furthermore, the mechanical toughness of CAP, which is one of the most serious problems for CAP, is considerably improved by blending PECH. This will have a great impact on industries because the blend technique widens the application of CAP.     

Modification of orientation birefringence of cellulose ester by addition of poly(lactic acid)

Effect of the addition of poly(lactic acid) (PLA) to cellulose acetate propionate (CAP) on the optical anisotropy is studied considering the morphology and molecular orientation. It is found that PLA is miscible with CAP when the amount of PLA is less than 3 wt.%. The dissolution of PLA chains having large intrinsic birefringence into CAP phase enhances the orientation birefringence of a stretched film, although the viscosity and thus the relaxation time of PLA is significantly shorter than those of CAP. The high level of orientation of PLA chains without relaxation is attained by the cooperative alignment with CAP chains. As a result, a retardation film having appropriate birefringence can be designed by polymer blends composed of biomass-based materials. When the amount of PLA is more than 3 wt.%, however, phase separation occurs. In the case of the blends with phase-separated morphology, the orientation birefringence is not greatly enhanced by blending PLA, because the molecular orientation of PLA in PLA phase relaxes immediately as compared with that of CAP.     

Degradation of polymer mixtures. VIII. Blends of poly(vinyl acetate) with poly(methyl methacrylate)

The degradation of blends of PVA and PMMA in the form of films cast from a common solution of the polymers has been studied by TVA, TG, and EGA (evolved gas analysis) for acetic acid. Volatile degradation products have been characterized by spectroscopic and GLC techniques. Molecular weight, spectral and thermal stability changes in PMMA extracted from partially degraded blends have been examined. These blends behave in a closely analogous manner to PVC-PMMA blends already investigated. The results suggest that the PMMA component of the heterogeneous blends is modified in two ways: (1) in a destabilization reaction series initiated by attack of acetate radicals generated in the PVA phase which migrate into the PMMA phase, and (2) in a stabilization reaction involving conversion of ester side groups to acid and subsequently to anhydride ring structures which act as blocking points for depolymerization. The rate of acetic acid production in the blend is less than in PVA degraded alone. The mechanism of degradation of PVA is reconsidered in the light of these results.     

Effect of clay organomodifiers on degradation of polyhydroxyalkanoates

Ammonium surfactants are commonly used as clay organomodifiers in nanocomposites. Their effect on the thermal- and thermo-mechanical degradation of polyhydroxyalkanoates (PHAs) is reported. Two poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) grades were tested and compared to polyhydroxybutyrate (PHB). Thermal stabilities were determined from thermogravimetric data and determination of molecular weight changes after processing was performed. The data revealed that all surfactants enhance the PHBV degradation. The results also highlight the preponderant effect of the initial M_w rather than the HV content on the thermal stability. The thermo-mechanical study confirmed the role of surfactants and their different behaviour towards PHBV degradation. This study demonstrates that all surfactants enhance the PHA degradation since their decomposition products most likely act as catalytic agents.     

Effect of ethylene-co-vinyl acetate-glycidylmethacrylate and cellulose microfibers on the thermal,rheological and biodegradation properties of poly(lactic acid) based systems

The properties and biodegradation behavior of blends of poly(lactic acid) (PLA) and ethylene-vinyl acetate-glycidylmethacrylate copolymer (EVA-GMA), and their composites with cellulose microfibers (CF) were investigated. The blends and composites were obtained by melt mixing and the morphology, phase behavior, thermal and rheological properties of PLA/EVA-GMA blends and PLA/EVA-GMA/CF composite films were investigated as a function of the composition. The disintegrability in composting conditions was examined by means of morphological, thermal and chemical analyses to gain insights into the post-use degradation processes. The results indicated a good compatibility of the two polymers in the blends with copolymer content up to 30 wt.%, while at higher EVA-GMA content a phase separation was observed. In the composites, the presence of EVA-GMA contributes to improve the interfacial adhesion between cellulose fibers and PLA, due to interactions of the epoxy groups of GMA with hydroxyls of CF. The addition of cellulose microfibers in PLA/EVA-GMA system modifies the rheological behavior, since complex viscosity increased in presence of fibers and decreased with an increase in frequency. Disintegration tests showed that the addition of EVA-GMA influence the PLA disintegration process, and after 21 days in composting conditions, blends and composites showed faster degradation rate in comparison with neat PLA due to the different morphologies induced by the presence of EVA-GMA and CF phases able to allow a faster water diffusion and an efficient PLA degradation process.     

Permeation of water as a tool for characterizing the effect of solvent, film thickness and water solubility in cellulose acetate membranes

Cellulose acetate membranes have been used in many applications; of particular interest are reverse osmosis systems, and as a neutral matrix for incorporation of different polymers (e.g., conducting polymers), inorganic ions (e.g., lanthanides) and organic (e.g., pharmaceutical) compounds. The properties of the new polymers derived from cellulose acetate or blends depend on those of cellulose acetate. This work presents an attempt to find links between thermodynamic and kinetic properties of cellulose acetate membranes in equilibrium with water. Water diffusion coefficients in cellulose acetate membranes are reported, measured with a simple water permeation technique. The comparison of these values with the percentage of water uptake and polymer thickness leads to interesting conclusions related with different polymer properties.     

Biodegradation of polyhydroxyalkanoates (PHAs) in tropical coastal waters and identification of PHA-degrading bacteria

Biodegradability patterns of two PHAs: a polymer of 3-hydroxybutyric acid (3-PHB) and a copolymer of 3-hydroxybutyric and 3-hydroxyvaleric acids (3-PHB/3-PHV) containing 11 mol% of hydroxyvalerate, were studied in the tropical marine environment, in the South China Sea (Nha Trang, Vietnam). No significant differences have been observed between degradation rates of 3-PHB and 3-PHB/3-PHV specimens; it has been found that under study conditions, biodegradation is rather influenced by the shape of the polymer item and the preparation technique than by the chemical composition of the polymer. Biodegradation rates of polymer films in seawater have been found to be higher than those of compacted pellets. As 3-PHB and 3-PHB/3-PHV are degraded and the specimens lose their mass, molecular weight of both polymers is decreased, i.e. polymer chains get destroyed. The polydispersity index of the PHAs grows significantly. However, the degree of crystallinity of both PHAs remains unchanged, i.e. the amorphous phase and the crystalline one are equally disintegrated. PHA-degrading microorganisms were isolated using the clear-zone technique, by inoculating the isolates onto mineral agar that contained PHA as sole carbon source. Based on the 16S rRNA analysis, the PHA-degrading strains were identified as Enterobacter sp. (four strains), Bacillus sp. and Gracilibacillus sp.     

Monomer reactivity ratios in graft copolymerization

This paper discusses monomer reactivity ratios in various radiation- and redox-initiated graft copolymerizations. The polymers studied were polyethylene, cellulose acetate, poly(vinyl chloride), polytetrafluoroethylene, poly(vinyl alcohol), and poly(methyl methacrylate); the comonomer mixtures were styrene–acrylonitrile, methyl acrylate–styrene, acrylonitrile–methyl acrylate, and vinyl acetate–acrylonitrile. The polymer–comonomer mixture systems were so chosen as to permit study of both homogeneous and heterogeneous systems. The homogeneous systems included systems of low and high viscosity. The heterogeneous systems included both polymers swollen by the comonomer mixture and polymers not swollen by the comonomer mixture. None of the homogeneous grafting systems studied showed deviations from the normal copolymerization behavior under a variety of experimental conditions. Monomer reactivity ratios in graft copolymerization were the same as the values in nongraft copolymerization. The heterogeneous systems in which the polymer was swollen by the comonomer mixture yielded grafted copolymer compositions which were the same as those in nongraft copolymerization. The heterogeneous grafting system polytetrafluoroethylene/styrene–acrylonitrile showed deviations from normal copolymerization behavior at low degrees of grafting when the reaction was only on the polymer surface. The behavior became normal at higher degrees of grafting when the system approaches that in which the polymer is swollen by the comonomers. In all reaction systems, it was found that the use of radiation to initiate the reaction does not in any way affect the copolymerization behavior of the two monomers in a comonomer pair.     

Thermogravimetric and wide angle X-ray diffraction analysis of thermoplastic elastomers from nylon copolymer and EPDM rubber

Nylon copolymer (PA6, 66) and ethylene propylene diene (EPDM) blends with and without compatibilizer were prepared by melt mixing using Brabender Plasticorder. The thermal stability of nylon copolymer (PA6, 66)/ethylene propylene diene rubber (EPDM) blends was studied using thermogravimetric analysis (TGA). The morphology of the blends was investigated using scanning electron microscopy (SEM). In this work, the effects of blend ratio and compatibilisation on thermal stability and crystallinity were investigated. The incorporation of EPDM rubber was found to improve the thermal stability of nylon copolymer. The kinetic parameters of the degradation process were also studied. A good correlation was observed between the thermal properties and phase morphology of the blends. By applying Coats and Redfern method, the activation energies of various blends were derived from the Thermogravimetric curves. The compatibilization of the blends using EPM-g-MA has increased the degradation temperature and decreased the weight loss. EPM-g-MA is an effective compatibilizer as it increases the decomposition temperature and thermal stability of the blends. Crystallinity of various systems has been studied using wide angle X-ray scattering (WAXS). The addition of EPDM decreases the crystallinity of the blend systems.     

Characterization of copolymer hydroxybutyrate/hydroxyvalerate from saponified vernonia,soybean, and "spent" frying oils

Poly(beta-hydroxyalkanoate)s (PHAs) were biosynthesized by Ralstonia eutropha (formerly known as Alcaligenes eutrophus) by using saponified soybean, vernonia, and "spent" frying oils. These PHAs were isolated and characterized by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS), gas chromatography/mass spectrometry (GC/MS), proton nuclear magnetic resonance spectrometry (1H NMR), and 2-dimensional homonuclear (1H-1H) correlation spectroscopy (COSY). The analytical results revealed that the PHAs produced from saponified vernonia and soybean oils were copolymers of hydroxybutyrate (HB) and hydroxyvalerate (HV), that is, P(HB/HV)s, whereas the saponified "spent" frying oil produced only poly(beta- hydroxybutyrate) (PHB) homopolymer. MALDI-MS, GC/MS, and NMR independently confirmed the composition of the PHAs. Saponified soybean oil and vernonia oil PHAs contained approximately 4 and 1% HV units, respectively. For comparison, commercial PHB and P(HB/HV), produced by R. eutropha by using glucose and a cosubstrate of glucose and propionic acid, respectively, as carbon sources, were similarly characterized.     

Modified cellulose acetate flat membranes for desalination

In this article, the radiation grafting of acrylamide on to cellulose acetate flat membranes using UV-irradiation on the initiator is described. The modified membranes thus obtained have been characterized by IR, DSC, and TGA. Their transport properties have been studied. The modified membranes exhibit higher salt rejection with slightly reduced water flux as compared with cellulose acetate membrane. The work is further extended to study the thermal stability of these modified membranes in a dry state. These modified membranes up to 330°C are stable.     

Production of polyhydroxyalkanoates by fermentation of bacteria

Polyhydroxyalkanoates (PHAs) are carbon and energy reserve material accumulated by numerous microorganisms and have been drawing much attention as biodegradable substitutes for conventional nondegradable plastics and elastomers. There are a number of different PHAs having a variety of material properties based on the different monomer composition. Poly(3‐hydroxybutyrate) and poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) are now efficiently produced by bacterial fermentation at reasonable production costs. Recent advances in the production of short‐chain‐length (SCL) PHAs by bacterial fermentation are reviewed. Current status of the production of medium‐chain‐length (MCL) PHAs and SCL‐MCL‐PHA copolymers is also reviewed.     

Thermal degradation of vinylidene chloride/[4-(t-butoxycarbonyloxy)phenyl]methyl acrylate copolymers

Vinylidene chloride polymers containing comonomer units capable of consuming evolved hydrogen chloride to expose good radical-scavenging sites might be expected to display greater thermal stability than similar polymers containing simple alkyl acrylates as comonomer. Incorporation of a comonomer containing the phenyl t-butyl carbonate moiety into a vinylidene chloride polymer has the potential to afford a polymer with pendant groups which might interact with hydrogen chloride to expose phenolic groups. Copolymers of vinylidene chloride with [4-(t-butoxycarbonyloxy)phenyl]methyl acrylate have been prepared, characterized, and subjected to thermal degradation. The degradation has been characterized by thermal and spectroscopic techniques. The degradation of vinylidene chloride/[4-(t-butoxycarbonyloxy)phenyl]methyl acrylate copolymers is much more facile than the same process for similar copolymers containing either [4-(isobutoxycarbonyloxy)phenyl]methyl acrylate or methyl acrylate, a simple alkyl acrylate, as comonomer. During copolymer degradation, [4-(t-butoxycarbonyloxy) phenylmethyl acrylate units are apparently converted to acrylic acid units by extensive fragmentation of the sidechain. Thus, the phenyl t-butyl carbonate moiety does function as a labile acid-sensitive pendant group but its decomposition in this instance leads to the generation of a phenoxybenzyl carboxylate capable of further fragmentation.     

Isothermal Degradation of PVC/MBS Blends

The process of thermal degradation of poly(vinyl chloride)/poly(methyl methacrylate-butadiene-styrene) (PVC/MBS) blends was investigated by means of isothermal thermogravimetry in nitrogen. The total mass loss was determined after 120 min. The kinetic parameters of the degradation process were determined by applying two kinetic models: the model which assumes autocatalytic degradation (Prout-Tompkins) and the model of two-dimensional diffusion. It was established that the thermal degradation at lower degrees of conversion (α<0.20) was well described by the former model, but the latter model was applicable at higher degrees of conversion. The thermal stability of blends at a certain temperature of isothermal degradation depends on the blend composition and the shell/core ratio in MBS, and on the adhesion in the boundary layer in PVC/MBS blends. This revised version was published online in July 2006 with corrections to the Cover Date.     

Synthesis of polyhydroxyalkanoate (PHA) from excess activated sludge under various oxidation-reduction potentials (ORP) by using acetate and propionate as carbon sources

Accumulation of poly hydroxyalkanoate (PHA) from excess activated sludge (EAS) was monitored and controlled via the oxidation-reduction potential (ORP) adjusting process. The ORP was adjusted and controlled by only regulating the gas-flow rate pumped into the cultural broth in which sodium acetate (C2) and propionate (C3) were used as carbon sources. Productivity of PHA and the PHA compositions at various C2 to C3 ratios were also investigated. When ORP was maintained at +30 mV, 35% (w/w) of PHA of cell dry weight obtained when C2 was used as sole carbon source. The PHA copolymer, poly-(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), accumulated by EAS with different 3-hydroxyvalarate (3HV) molar fractions ranged from 8% to 78.0% when C2 and C3 was used as sole carbon source, By using ORP to monitor and control the fermentation process instead DO meter, the ORP system provided more precise control to the PHA accumulation process from EAS under low dissolved oxygen (DO) concentrations. Adjusting the C2 to C3 ratios in the media could control the composition such as the 3HV/3HB ratios of the PHBV. Furthermore, it might be an effective way to adjust the 3HV molar fractions in PHBV by controlling the DO concentration via the ORP monitoring system. The 3HV molar fractions in the PHBV declined with increasing ORP from −30 mV to +100 mV by adjusting the gas-flow rate (i.e. the DO concentration). It is concluded that the DO plays a very important role in the synthesis of 3HV subunits in PHBV co-polymer from the EAS. Therefore, a hypothetic metabolic model for PHA synthesis from EAS was proposed to try to explain the results in this study.     

Biodegradable PEO/cellulose‐based solid–solid phase change materials

A series of poly(ethylene oxide) (PEO) blends with cellulose (CEL) or cellulose derivatives—carboxymethyl cellulose (CMC), cellulose acetate (CAC), and cellulose ether (CET)—has been investigated as phase change materials for thermal energy storage. For PEO/CEL blends solid–solid phase transition has been observed in the whole concentration's range; for PEO/CMC and PEO/CET blends solid–solid phase transition has been found for PEO content 25 or 50 and 25 wt%, respectively. Otherwise, solid–liquid phase transition takes place. MTDSC investigations revealed that for PEO/CEL and PEO/CMC blends transition the strongest recrystallization effect (as evidenced by exothermic effect in reversing heat flow) as melting process occurred. FTIR analysis shows a shift of the stretching vibration bands of both the proton‐donor O? H groups from CEL and PEO due to intermolecular hydrogen interactions between the blends' components. Copyright © 2010 John Wiley & Sons, Ltd.