Production of l-malic acid via biocatalysis employing wild-type and respiratory-deficient yeasts

Succinic acid was produced efficiently from fumaric acid by a recombinantE. coli strain DH5αt/pGC1002 containing multicopy fumarate reductase genes. The effects of initial fumaric acid and glucose concentration on the production of succinic acid were investigated. Succinic acid reached 41 to over 60 g/L in 48.5 h starting with 50 to 64 g/L fumaric acid. Significant substrate inhibition was observed at initial fumaric acid concentration of 90 g/L. L-Malic acid became the major fermentation product under these conditions. Provision of glucose (5-30 g/L) to the fermentation medium stimulated the initial succinic acid production rate over two folds.     

Production of propionic acid using a xylose utilizingPropionibacterium

The kinetics ofP. acidipropionici (ATCC25562), a xylose-utilizing rumen microorganism, was studied to assess its use for propionic acid production from wood hydrolyzates. Propionic acid has been shown to have a stronger inhibitory effect than acetic acid, with the undissociated acid form being responsible for the majority of the inhibitory effect. Thus, in batch tests with pH controlled at 6.0, the propionic acid concentration reaches 25 g/L and the acetic acid 7 g/L. Xylose uptake rate is dependent on the specific growth rate and glucose concentration. An immobilized cell columnar reactor at very high product yields (80%) proved adequate for propionic production. At cell concentrations of 95 g/L with high product concentration, volumetric productivities of 2.7 g/L·h were obtained in ultrafiltration cell recycle systems.     

Continuous production of lactic acid in a cell recycle reactor

The production of lactic acid from glucose has been demonstrated using a CSTR (continuous stirred-tank reactor) with cell recycle. Studies were conducted withLactobacillus delbrueckii at a fermentation temperature of 42°C and a pH of 6.25. A cell density of 140 g dry weight/L and a volumetric productivity of 150 g/L.h, with complete glucose consumption, were obtained. It was not possible to obtain a lactic acid concentration above 60 g/L because of product inhibition. A cell purge was not necessary to maintain high viability bacteria culture or to obtain a steady state. At steady state the net cell growth appeared to be negligible. The specific glucose consumption for cell maintenance was 0.33 g glucose/g cells-h.     

Production of 2,3- butanediol from pretreated corn cob byKlebsiella oxytoca in the presence of fungal cellulase

A simple and effective method of treatment of lignocellulosic material was used for the preparation of corn cob for the production of 2,3-butanediol byKlebsiella oxytoca ATCC 8724 in a simultaneous saccharification and fermentation process. During the treatment, lignin, and alkaline extractives were solubilized and separated from cellulose and hemicellulose fractions by dilute ammonia (10%) steeping. Hemicellulose was then hydrolyzed by dilute hydrochloric acid (1%, wJv) hydrolysis at 100°C at atmospheric pressure and separated from cellulose fraction. The remaining solid, with 90% of cellulose, was then used as the substrate. A butanediol concentration of 25 g/L and an ethanol concentration of 7 g/L were produced byK. oxytoca from 80 g/L of corn cob cellulose with a cellulase dosage of 8.5 IFPU/g corn cob cellulose after 72 h of SSF. With only dilute acid hydrolysis, a butanediol production rate of 0.21 g/L/h was obtained that is much lower than the case in which corn cob was treated with ammonia steeping prior to acid hydrolysis. The butanediol production rate for the latter was 0.36 g/L/h.     

Optimization of Fermentation Conditions for the Biosynthesis of <Emphasis Type="SmallCaps">l</Emphasis>-Threonine by <Emphasis Type="Italic">Escherichia coli</Emphasis>

In this study, the fed-batch fermentation technique was applied to improve the yield of l-threonine produced by Escherichia coli TRFC. Various fermentation substrates and conditions were investigated to identify the optimal carbon source, its concentration and C/N ratio in the production of l-threonine. Sucrose was found to be the optimal initial carbon source and its optimal concentration was determined to be 70 g/L based on the results of fermentations conducted in a 5-L jar fermentor using a series of fed-batch cultures of E. coli TRFC. The effects of glucose concentration and three different feeding methods on the production of l-threonine were also investigated in this work. Our results showed that the production of l-threonine by E. coli was enhanced when glucose concentration varied between 5 and 20 g/L with DO-control pulse fed-batch method. Furthermore, the C/N ratio was a more predominant factor than nitrogen concentration for l-threonine overproduction and the optimal ratio of ammonium sulfate to sucrose (g/g) was 30. Under the optimal conditions, a final l-threonine concentration of 118 g/L was achieved after 38 h with the productivity of 3.1 g/L/h (46% conversion ratio from glucose to threonine).     

Continuous production of lactic acid from glucose and lactose in a cell-recycle reactor

Growth and lactic acid production ofLactobacillus delbreuckii were compared using glucose and lactose as carbon sources. A continuous-flow stirred-tank fermenter was coupled with a cross-flow filtration unit to permit operation at high-cell concentrations. At steady state, yeast extract requirements for lactic-acid production were lower when glucose was used as a substrate than with lactose fermentation. Once steady state was obtained, with glucose feed, it was possible to lower the yeast extract concentration without affecting biomass concentration and lactic acid production. The lacticacid concentration that inhibited cell growth and lactic acid production was found to depend on the choice of a carbon substrate.     

Production of succinic acid by anaerobiospirillum succiniciproducens

The effect of an external supply of carbon dioxide and pH on the production of succinic acid byAnaerobiospirillum succiniciproducens was studied. In a rich medium containing yeast extract and peptone, when the external carbon dioxide supply was provided by a 1.5M Na₂CO₃ solution that also was used to maintain the pH at 6.0, no additional carbon dioxide supply was needed. In fact, sparging CO₂ gas into the fermenter at 0.025 L/L-min or higher rates resulted in significant decreases in both production rate and yield of succinate. Under the same conditions, the production of the main by-product acetate was not affected by sparging CO₂ gas into the fermenter. The optimum pH (pH 6.0) for the production of succinic acid was found to be in agreement with results previously reported in the literature. Succinic acid production also was studied in an industrial-type inexpensive medium in which light steep water was the only source of organic nutrients. At pH 6.0 and with a CO₂ gas sparge rate of 0.08 L/L-min, succinate concentration reached a maximum of 32 g/L in 27 h with a yield of 0.99 g succinate/g glucose consumed.     

Fermentation kinetics of ethanol production from glucose and xylose by recombinant Saccharomyces 1400(pLNH33)

Fermentation kinetics of ethanol production from glucose, xylose, and their mixtures using a recombinant Saccharomyces 1400 (pLNH33) are reported. Single-substrate kinetics indicate that the specific growth rate of the yeast and the specific ethanol productivity on glucose as the substrate was greater than on xylose as a substrate. Ethanol yields from glucose and xylose fermentation were typically 95 and 80% of the theoretical yield, respectively. The effect of ethanol inhibition is more pronounced for xylose fermentation than for glucose fermentation. Studies on glucose-xylose mixtures indicate that the recombinant yeast co-ferments glucose and xylose. Fermentation of a 52.8 g/L glucose and 56.3 g/L xylose mixture gave an ethanol concentration of 47.9 g/L after 36 h. Based on a theoretical yield of 0.51 g ethanol/g sugars, the ethanol yield from this experiment (for data up to 24 h) was calculated to be 0.46 g ethanol/g sugar or 90% of the theoretical yield. The specific growth rate of the yeast on glucose-xylose mixtures was found to lie between the specific growth rate on glucose and the specific growth rate on xylose. Kinetic studies were used to develop a fermentation model incorporating the effects of substrate inhibition, product inhibition, and inoculum size. Good agreements were obtained between model predictions and experimental data from batch fermentation of glucose, xylose, and their mixtures.     

Characterization of a Recombinant Flocculent Saccharomyces cerevisiae Strain that Co-ferments Glucose and Xylose: I. Influence of the Ratio of Glucose/Xylose on Ethanol Production

Glucose/xylose mixtures (90 g/L total sugar) were evaluated for their effect on ethanol fermentation by a recombinant flocculent Saccharomyces cerevisiae, MA-R4. Glucose was utilized faster than xylose at any ratio of glucose/xylose, although MA-R4 can simultaneously co-ferment both sugars. A high percentage of glucose can increase cell biomass production and therefore increase the rate of glucose utilization (1.224 g glucose/g biomass/h maximum) and ethanol formation (0.493 g ethanol/g biomass/h maximum). However, the best ratio of glucose/xylose for the highest xylose consumption rate (0.209 g xylose/g biomass/h) was 2:3. Ethanol concentration and yield increased and by-product (xylitol, glycerol, and acetic acid) concentration decreased as the proportion of glucose increased. The maximum ethanol concentration was 41.6 and 21.9 g/L after 72 h of fermentation with 90 g/L glucose and 90 g/L xylose, respectively, while the ethanol yield was 0.454 and 0.335 g/g in 90 g/L glucose and 90 g/L xylose media, respectively. High ethanol yield when a high percentage of glucose is available is likely due to decreased production of by-products, such as glycerol and acetic acid. These results suggest that ethanol selectivity is increased when a higher proportion of glucose is available and reduced when a higher proportion of xylose is available.     

Xanthan gum production from cassava bagasse hydrolysate with Xanthomonas campestris using alternative sources of nitrogen

Cassava bagasse was hydrolyzed using HCl and the hydrolysate was used for the production of xanthan gum using a bacterial culture of Xanthomonas campestris. Cassava bagasse hydrolysate with an initial concentration of approx 20 g of glucose/L proved to be the best substrate concentration for xanthan gum production. Among the organic and inorganic nitrogen sources tested to supplement the medium—urea, yeast extract, peptone, potassium nitrate, and ammonium sulfate—potassium nitrate was most suitable. Ammonium sulfate was the least effective for xanthan gum production, and it affected sugar utilization by the bacterial culture. In media with an initial sugar concentration of 48.6 and 40.4 g/L, at the end of fermentation about 30 g/L of sugars was unused. Maximum xanthan gum (about 14 g/L) was produced when fermentation was carried out with a medium containing 19.8 g/L of initial reducing sugars supplemented with potassium nitrate and fermented for 72 h, and it remained almost the same until the end of fermentation (i.e., 96 h).     

Glucose utilization by lysine-producing fluoroacetate-sensitive mutants ofCorynebacterium glutamicum

A fluoroacetate-sensitive mutant was isolated fromCorynebacterium glutamicum, ATCC 21513, following mutagenesis with NTG. Batch fermentations show that in terms of growth kinetics, glucose utilization, and lysine formation, there are significant differences between the mutant and the parent. The mutant’s specific growth rate (0.22/h) is lower than that for the parent (0.34/h). Also, the yield expressed as lysine/glucose consumed does not alter as a function of the glucose concentration for the mutant, and is about 0.22, whereas for the parent, this coefficient decreases with increasing glucose concentration. The maximum specific rate of lysine production for the mutant is 1.3 g/L/h that is about two-fold higher than that for the parent.     

Effect of environmental factors and carbohydrate on gellan gum production

Submerged culture fermentation studies were carried out in batch mode for optimizing the environmental parameters and carbon source requirement by Pseudomonas elodea for the production of gellan gum. The maximum production of gellan gum was obtained with 16-h-old culture and 8% inoculum at 30°C and pH 7.0 after 52 h of incubation (6.0 g/L). Of the various carbon sources tested, 2% sucrose, glucose, and soluble starch yielded considerably high amounts of gellan. Studies on the concentration of various carbohydrates on gellan gum production indicated that the optimum concentration of glucose and starch was 3%, whereas for sucrose it was 4%. The addition of glucose in the medium above 3% had a detrimental effect on gellan yield. The investigation of intermediate two-step addition of glucose under identical conditions of fermentation showed an enhanced production of gellan (8.12 g/L) as compared with the control (6.0 g/L). To optimize the recovery of gellan from fermented broth, different solvents were tested for precipitation of gellan gum. Among the various solvents tested, tetrahydrofuran gave better recovery of gellan (82%) as compared with the conventional solvent isopropanol (49%).     

Production of l-lactic acid byRhizopus oryzae in a bubble column fermenter

Two distinctive forms of growth (mycelial filamentous and mycelial pellets) ofRhizopus oryzae were obtained by manipulating the initial pH of the medium with the controlled addition of CaCO₃ in a bubble fermenter. In the presence of CaCO₃, diffused filamentous growth was obtained when the initial pH of the substrate was 5.5. In the absence of CaCO3, mycelial pellet growth was obtained when the initial pH was 2.0. The fermentation study indicated that the mycelial growth has a shorter lag period before the onset of acid formation. Both physical forms of growth ofRhizopus exhibited a high yield of L-lactic acid in the bubble fermenter when the initial glucose concentration exceeded 70 g/L. A final lactic acid concentration of 62 g/L was produced by the filamentous form ofRhizopus from 78 g/L glucose after 27 h. This showed a weight yield of 80% of glucose consumed, with an average specific productivity of 1.46 g/h/g. Similarly, the pellet form ofRhizopus produced a final lactic acid concentration of 66 g/L from 76 g/L glucose after 43 h, with a weight yield of 86% and an average specific productivity of 1.53 g/h/g.     

Optimization of l -(+)-lactic acid production using pelletized filamentous Rhizopus oryzae NRRL 395

Lactic acid is used as a food additive for flavor and preservation and a precursor in the development of poly-lactic acid, a product used to make biodegradable plastics and textiles. Rhizopus oryzae NRRL 395 is known to be a strain that produces optically pure l-(+)-lactic acid. The morphology of Rhizopus cultures is complex, forming filamentous, clumps, and pellet mycelia. Different morphology growth has significant effects on lactic acid production. In bioreactors, the filamentous or clump mycelia increase the viscosity of the medium, wrap around impellers, and block the nutrient transportation, leading to a decrease in production efficiency and bioreactor performance. Growing fungi in pellet form can significantly improve these problems. In this study, factors that affect lactic acid production in pelletized flask cultures using R. oryzae NRRL 395 were investigated in detail. Completely randomized designs were used to determine the influence of culture temperature, time, concentration of glucose, and inoculum size. Lactic acid fermentation using clump and pellet morphologies were performed in a 5 L fermentor at the optimal values obtained from flask culture. Finally, fed-batch culture was used to enhance the lactate concentration in broth. The final lactate concentration of fed-batch culture reached 92 g/L. The data presented in the article can provide useful information on optimizing lactic acid production using alternative source materials.     

Conditions that promote production of lactic acid byZymomonas mobilis in batch and continuous culture

This study documents the similar pH-dependent shift in pyruvate metabolism exhibited byZymomonas mobilis ATCC 29191 and ATCC 39676 in response to controlled changes in their steady-state growth environment. The usual high degree of ethanol selectivity associated with glucose fermentation by Z.mobilis is associated with conditions that promote rapid and robust growth, with about 95% of the substrate (5% w/v glucose) being converted to ethanol and CO₂, and the remaining 5% being used for the synthesis of cell mass. Conditions that promote energetic uncoupling cause the conversion efficiency to increase to 98% as a result of the reduction in growth yield (cell mass production). Under conditions of glucose-limited growth in a chemostat, with the pH controlled at 6.0, the conversion efficiency was observed to decrease from 95% at a specific growth rate of 0.2/h to only 80% at 0.042/h. The decrease in ethanol yield was solely attributable to the pH-dependent shift in pyruvate metabolism, resulting in the production of lactic acid as a fermentation byproduct. At a dilution rate (D) of 0.042/h, decreasing from pH 6.0 to 5.5 resulted in a decrease in lactic acid from 10.8 to 7.5 g/L. Lactic acid synthesis depended on the presence of yeast extract (YE) or tryptone in the 5% (w/v) glucose-mineral salts medium. At D = 0.15/h, reduction in the level of YE from 3 to 1 g/L caused a threefold decrease in the steady-state concentration of lactic acid at pH 6. No lactic acid was produced with the same mineral salts medium, with ammonium chloride as the sole source of assimilable nitrogen. With the defined salts medium, the conversion efficiency was 98% of theoretical maximum. When chemostat cultures were used as seed for pH-stat batch fermentations, the amount of lactic acid produced correlated well with the activity of the chemostat culture; however, the mechanism of this prolonged induction     

Comparison of different strains of the yeastYarrowia lipolytica for citric acid production from glucose hydrol

Four commercial strains and two mutants of the yeast species Yarrowia lipolytica were screened using batch fermentation. Strain Y. lipolytica A-101-1.14 (induced with UV irradiation) was found to be the most suitable for citric acid production from glucose hydrol (39.9% glucose and 2.1% other sugars), a byproduct of glucose production from potato starch. The specific rate of total citric and isocitric acid production was 0.138 g/g.h, the yield on consumed glucose 0.93 g/g, and the productivity achieved was as high as 1.25 g/L.h. All of the tested yeast strains were able to utilize only the glucose from the glucose hydrol medium. Thus, some residual higher oligosaccharides remained in the process effluent.     

Bioconversion of fumarate to succinate using glycerol as a carbon source

In this study, a facultative bacterium that converts fumarate to succinate at a high yield was isolated. The yield of biocon version was enhanced about 1.2 times by addition of glucose into culture medium at an initial concentration of 6 g/L. When the initial cell density was high (2 g/L), the succinate produced at pH 7.0 for initial fumarate concentrations of 30, 50, 80, and 100 g/L were 29.3, 40.9, 63.6, and 82.5 g/L, respectively, showing an increase with the initial fumarate concentration. The high yield of 96.8%/mole of fumarate in just 4 h was obtained at the initial fumarate concentration of 30 g/L. Comparing these values to those obtained with low cell culture (0.2 g/L), we found that the amount of succinate produced was similar, but the production rate in the high cell culture was about three times higher than was the case in the low cell culture. This strain converted fumarate to succinate at a rate of 3.5 g/L·h under the sparge of CO₂.     

Optimization of seed production for a simultaneous saccharification cofermentation biomass-to-ethanol process using recombinantZymomonas

The five-carbon sugard-xylose is a major component of hemicellulose and accounts for roughly one-third of the carbohydrate content of many lignocellulosic materials. The efficient fermentation of xylose-rich hemicellulose hydrolyzates (prehydrolyzates) represents an opportunity to improve significantly the economics of large-scale fuel ethanol production from lignocellulosic feedstocks. The National Renewable Energy Laboratory (NREL) is currently investigating a simultaneous saccharification and cofermentation (SSCF) process for ethanol production from biomass that uses a dilute-acid pretreatment and a metabolically engineered strain ofZymomonas mobilis that can coferment glucose and xylose. The objective of this study was to establish optimal conditions for cost-effective seed production that are compatible with the SSCF process design. Two-level and three-level full factorial experimental designs were employed to characterize efficiently the growth performance of recombinantZ. mobilis CP4:pZB5 as a function of nutrient level, pH, and acetic acid concentration using a synthetic hardwood hemicellulose hydrolyzate containing 4% (w/v) xylose and 0.8% (w/v) glucose. Fermentations were run batchwise and were pH-controlled at low levels of clarified corn steep liquor (cCSL, 1-2% v/v), which were used as the sole source of nutrients. For the purpose of assessing comparative fermentation performance, seed production was also carried out using a “benchmark” yeast extract-based laboratory medium. Analysis of variance (ANOVA) of experimental results was performed to determine the main effects and possible interactive effects of nutrient (cCSL) level, pH, and acetic acid concentration on the rate of xylose utilization and the extent of cell mass production. Results indicate that the concentration of acetic acid is the most significant limiting factor for the xylose utilization rate and the extent of cell mass production; nutrient level and pH exerted weaker, but statistically significant effects. At pH 6.0, in the absence of acetic acid, the final cell mass concentration was 1.4 g dry cell mass/L (g DCM/L), but decreased to 0.92 and 0.64 g DCM/L in the presence of 0.5 and 1.0% (w/v) acetic acid, respectively. At concentrations of acetic acid of 0.75 (w/v) or lower, fermentation was complete within 1.5 d. In contrast, in the presence of 1.0% (w/v) acetic acid, 25% of the xylose remained after 2 d. At a volumetric supplementation level of 1.5–2.0% (v/v), cCSL proved to be a cost-effective single-source nutritional adjunct that can support growth and fermentation performance at levels comparable to those achieved using the expensive yeast extract-based laboratory reference medium.     

High-Cell-Density cultivation of pseudomonas putida IPT 046 and medium-chain-length polyhydroxyalkanoate production from sugarcane carbohydrates

We studied high-density cultures of Pseudomonas putida IPT 046 for the production of medium-chain-length polyhydroxyalkanoates (PHA_MCL) using an equimolar mixture of glucose and fructose as carbon sources. Kinetics studies of P. putida growth resulted in a maximum specific growth rate of 0.65h⁻¹. Limitation and inhibition owing to NH₄ ⁺ ions were observed, respectively, at 400 and 3500 mg of NH₄ ⁺/L. The minimum concentration of dissolved oxygen in the broth must be 15% of saturation. Fed-batch strategies for high-cell-density cultivation were proposed. Pulse feed followed by constant feed produced a cell concentration of 32 g/L in 18 h of fermentation and low PHA_MCL content. Constant feed produced a cell concentration of 35 g/L, obtained in 27 h of fermentation, with up to 15% PHA_MCL. Exponential feed produced a cell concentration of 30 g/L in 20 h of fermentation and low PHA_MCL content. Using the last strategy, 21% PHA_MCL was produced during a period of 34 h of fed-batch operation, with a final cell concentration of 40 g/L and NH₄ ⁺ limitation. Using phosphate limitation, 50 g/L cell concentration, 63% PHA_MCL and a productivity of 0.8 g/(L·h) were obtained in 42 h of fed-batch operation. The PHA_MCL yield factors from consumed carbohydrate for N-limited and P-limited experiments were, respectively, 0.15 and 0.19 g/g.     

Continuous production of butanol by clostridium acetobutylicum immobilized in a fibrous bed bioreactor

We explored the influence of dilution rate and pH in continuous cultures of Clostridium acetobutylicum. A 200-mL fibrous bed bioreactor was used to produce high cell density and butyrate concentrations at pH 5.4 and 35°C. By feeding glucose and butyrate as a cosubstrate, the fermentation was maintained in the solventogenesis phase, and the optimal butanol productivity of 4.6g/(L h) and a yield of 0.42 g/g were obtained at a dilution rate of 0.9h⁻¹ and pH 4.3. Compared to the conventional acetone-butanol-ethanol fermentation, the new fermentation process greatly improved butanol yield, making butanol production from corn an attractive alternative to ethanol fermentation.