β-CD存在下MMA细乳液体系的RAFT聚合

近年来，活性自由基聚合已成为高分子合成领域中的一个热门课题．Rizzardo研究小组提出了一种新型活性自由基聚合反应，即RAFT(Reversible addition-fragmentation chain transfer)聚合．RAFT反应在传统的自由基聚合中加入了具有高链转移常数和特定结构的链转移剂——双硫酯类化合物．当链转移剂的浓度足够大时，链转移反应由不可逆变为可逆，聚合反应也随之发生质的变化，由不可控     

Matrix‐grafted multiwalled carbon nanotubes/poly(methyl methacrylate) nanocomposites synthesized by in situ RAFT polymerization: A kinetic study

A new approach was developed to functionalize multiwalled carbon nanotubes (MWCNTs) with a polymerizable methyl methacrylate (MMA) groups, and the structure of functionalized MWCNTs were characterized by FTIR, Raman, XPS, and TEM. Using the strategy of “grafting through,” poly(methyl methacrylate) (PMMA) chains were grafted onto the surface of MWCNTs during the in situ synthesis of MWCNT/PMMA nanocomposites over reversible addition‐fragmentation chain transfer (RAFT) polymerization. Kinetics of RAFT‐mediated polymerization of MMA in the presence of MMA‐grafted MWCNTs was studied by using gas chromatography and gel permeation chromatography. To further study, attached polymers were detached and their molecular characteristics were compared to freely formed chains. Results of kinetic studies showed that the utilized commercial chain transfer agent strictly reduced the rate of polymerization as well as relatively controlled molecular weights and narrow molecular weight distributions of free chains. MWCNTs showed a radical activity, retarding the polymerization and reducing the rate of reaction. The effect of MWCNTs concentrations on molecular weights and polydispersity indexes (PDI) was different at the surface and in the bulk. The molecular weights of free chains increased, and the PDI was decreased with increasing MWCNTs. © 2012 Wiley Periodicals, Inc. Int J Chem Kinet 44: 555–569, 2012     

Controlled (Co)Polymerization of Methacrylates Using a Novel Symmetrical Trithiocarbonate RAFT Agent Bearing Diphenylmethyl Groups

Herein, we report a novel type of symmetrical trithiocarbonate chain transfer agent (CTA) based diphenylmethyl as R groups. The utilization of this CTA in the Reversible Addition-Fragmentation chain Transfer (RAFT) process reveals an efficient control in the polymerization of methacrylic monomers and the preparation of block copolymers. The latter are obtained by the (co)polymerization of styrene or butyl acrylate using a functionalized macro-CTA polymethyl methacrylate (PMMA) previously synthesized. Data show low molecular weight dispersity values (Đ < 1.5) particularly in the polymerization of methacrylic monomers. Considering a typical RAFT mechanism, the leaving groups (R) from the fragmentation of CTA should be able to re-initiate the polymerization (formation of growth chains) allowing an efficient control of the process. Nevertheless, in the case of the polymerization of MMA in the presence of this symmetrical CTA, the polymerization process displays an atypical behavior that requires high [initiator]/[CTA] molar ratios for accessing predictable molecular weights without affecting the Đ. Some evidence suggests that this does not completely behave as a common RAFT agent as it is not completely consumed during the polymerization reaction, and it needs atypical high molar ratios [initiator]/[CTA] to be closer to the predicted molecular weight without affecting the Đ. This work demonstrates that MMA and other methacrylic monomers can be polymerized in a controlled way, and with “living” characteristics, using certain symmetrical trithiocarbonates.     

Reversible Addition-Fragmentation Chain Transfer Polymerization of Methyl Methacrylate in Microemulsion: The Influence of Reaction Conditions on Polymerization

The reversible addition-fragmentation chain transfer (RAFT) polymerization of methyl methacrylate (MMA) using cetyltrimethylammonium bromide (CTAB) as surfactant and a difunctional RAFT agent S,S′-bis (α, α′-dimethylacetic acid) trithiocarbonate (BDAT) as chain transfer were conducted in microemulsion. The influence of polymerization temperature and concentration of RAFT agent on the polymerization were investigated, respectively. The results showed that the molecular weight of products increased linearly with conversion, the polydispersity indexes remained low value, and the polymerization processes were totally under control with increasing concentration of RAFT agent, the polymerization behavior exhibited living polymerization characters. In addition, the influence of RAFT concentration on the particle size was investigated by TEM. The results indicated that the particles were highly monodispersed and the particle size increased with increasing concentration of RAFT agent.     

“Living”/controlled free radical polymerization of MMA in the presence of cobalt(II) 2‐ethylhexanoate: A switch from RAFT to ATRP mechanism

A metal complex, cobalt(II) 2‐ethylhexanoate (CEH), was added to the system of thermal‐initiated reversible addition‐fragmentation chain transfer (RAFT) polymerization of methyl methacrylate (MMA) with 2‐cyanoprop‐2‐yl 1‐dithionaphthalate (CPDN) as the RAFT agent at 115 °C. The polymerization rate was remarkably enhanced in the presence of CEH in comparison with that in the absence of CEH, and the increase of the CPDN concentration also accelerated the rate of polymerization. The polymerization in the concurrence of CPDN and CEH demonstrated the characters of “living”/controlled free radical polymerization: the number‐average molecular weights (M_n) increasing linearly with monomer conversion, narrow molecular weight distributions (M_w/M_n) and obtained PMMA end‐capped with the CPDN moieties. Meanwhile, CEH can also accelerate the rate of RAFT polymerization of MMA using the PMMA as macro‐RAFT agent instead of CPDN. Similar polymerization profiles were obtained when copper (I) bromide (CuBr)/N,N,N′,N′′,N′′‐pentamethyldiethylenetriamine was used instead of CEH. Extensive experiments in the presence of butyl methacrylate, bis(cyclopentadienyl) cobalt(II) and cumyl dithionaphthalenoate were also conducted; similar results as those of MMA/CPDN/CEH system were obtained. A transition of the polymerization mechanism, from RAFT process without CEH addition to atom transfer radical polymerization in the presence of CEH, was possibly responsible for polymerization profiles. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5722–5730, 2007     

RAFT分散聚合方法制备支化聚甲基丙烯酸甲酯

以甲基丙烯酸甲酯(MMA)与三缩丙二醇双丙烯酸酯(TPGDA)为单体,S-1-十二烷基-S′-(α,α′-二甲基-α″-乙酸)三硫代碳酸酯作为RAFT试剂防止反应体系交联,进行RAFT分散共聚合.通过在成核以后加入RAFT试剂和多官能度单体(TPGDA)的两步法分散聚合反应得到了粒径接近单分散的球形聚合物粒子,其粒径大小在1.9～2.7μm范围,粒径分布为1.12～1.24.采用凝胶色谱法(GPC)、核磁共振(1H-NMR)对所得共聚物的分子量、分子量分布(MWD)、共聚物组成、共聚物结构进行了表征.GPC结果表明所得聚合物的分子量分布曲线呈双峰分布,说明在成核期形成了线形的MMA均聚物,而在成核后由MMA与TPGDA共聚生成了支化的共聚物.1H-NMR结果显示所得共聚物具有支化的结构,共聚物中TPGDA的比例低于其在初始原料中的比例.此外,所得共聚物的特性黏度随转化率升高而降低,形状因子α从0.643降低到0.548,进一步证明了聚合物具有支化结构.     

Synthesis of degradable poly(methyl methacrylate) star polymers via RAFT copolymerization with cyclic ketene acetals

Copolymerization of the cyclic ketene acetal 5,6‐benzo‐2‐methylene‐1,3‐dioxepane (BMDO) with methyl methacrylate (MMA) is studied with respect to its copolymerization parameters and the suitability to control BMDO/MMA copolymerizations via the reversible addition‐fragmentation chain transfer (RAFT) technique to obtain linear and 4‐arm star polymers. BMDO shows disparate copolymerization behavior with MMA and r₁ = 0.33 ± 0.06 and r₂ = 6.0 ± 0.8 have been determined for polymerization at 110 °C in anisole from fitting copolymer composition vs. comonomer feed data to the Lewis–Mayo equation. Copolymerization of the two monomers is successful in RAFT polymerization employing a trithiocarbonate control agent. As desired, polymers contain only little amount of polyester units stemming from BMDO units and preliminary degradation experiment show that the polymer degrades slowly, but steadily in aqueous 1 M NaOH dispersion. Within ten days, the polymers are broken down to low molecular weight segments from an initial molecular weight of M_n = 6000 g mol^?1. Star (co)polymerization with an erythritol‐based tetra‐functional RAFT agent following the Z‐group approach proceeds efficiently and polymers with a number‐average molecular weight of 10,000 g mol^?1 are readily obtained that degrade in similar manner as the linear copolymer counterparts. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1633–1641     

Synthesis of methacrylate derivatives oligomers by dithiobenzoate‐RAFT‐mediated polymerization

Reversible addition fragmentation chain transfer (RAFT) was used to synthesize methacrylic acid oligomers and oligo(methacrylic acid)‐b‐poly(methyl methacrylate) (PMAA‐b‐PMMA) with targeted degree of polymerization ≈ 10. Characterization is by size‐exclusion chromatography (SEC) and electrospray mass‐spectrometry. SEC data are presented as hydrodynamic volume distributions (HVDs), the only proper means to present comparative and meaningful SEC data when there is no unique relationship between size and molecular weight. The RAFT agent, (4‐cyanopentanoic acid)‐4‐dithiobenzoate (CPADB), produced dithiobenzoic acid as a side product during the polymerization of methacrylate derivatives. Precipitation in diethyl ether proved to be an easy way to remove this impurity from the PMAA‐RAFT oligomers. Both unpurified and purified macro‐RAFT agent were used to prepare amphiphilic PMAA‐b‐PMMA copolymers. Diblock copolymer prepared from the purified PMAA homopolymer had a narrower HVD in comparison to those obtained from the equivalent unpurified macro‐RAFT agent. This work shows that while cyanoisopropyl‐dithiobenzoate or CPADB are good RAFT agents for methacrylate derivatives, they exhibit some instability under typical polymerization conditions, and thus when oligomers are targeted, optimal control requires checking for the degradation product and appropriate purification steps when necessary (the same effect is present for larger polymers but is unimportant). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2277–2289, 2008     

Butyl acrylate RAFT polymerization in miniemulsion

Few successes about butyl acrylate (BA) RAFT miniemulsion homopolymerization were reported, even though styrene, methyl methacrylate, and vinyl acetate had been successfully applied in reversible addition fragmentation transfer (RAFT) miniemulsion polymerization. In this article, four types of RAFT agent with various designed R and Z groups [benzyl dithioisobutyrate (BDIB), 1-phenylethyl phenyldithioacetate (PEPDTA), cumyl dithioisobutyrate (CDIB), benzyl dithiobenzoate] were used to mediate BA miniemulsion polymerization using the conditions (5 wt % hexadance and sodium dodecyl sulfate) effective for styrene and methyl methacrylate systems. All four types of the RAFT agents effectively control over the bulk polymerization. In contrast, only BDIB resulted in a rather narrow molecular weight distribution in the miniemulsion polymerization. A pronounced inhibition and rate retardation were observed in both bulk and miniemulsion polymerizations mediated by CDIB and benzyl dithiobenzoate. When compared with the bulk polymerization, a much longer inhibition period (over eight times) was observed in the CDIB-mediated miniemulsion polymerization. It was concluded that only the RAFT agent with the primary R group and Z group with less stabilizing ability to the intermediate radicals is effective to mediate BA miniemulsion polymerization in terms of achieving a narrow molecular weight distribution and short inhibition period. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2304–2315, 2007     

Controlled polymerization of methacrylates at ambient temperature using trithiocarbonate chain transfer agents via SET‐RAFT–cyclohexyl methacrylate: A model study

Controlled radical polymerization of cyclohexyl methacrylate (CHMA), at ambient temperature, using various chain transfer agents (CTAs) is successfully demonstrated via single electron transfer‐radical addition fragmentation chain transfer (SET‐RAFT). Well‐controlled polymerization with narrow molecular weight distribution (M_w/M_n) < 1.25 was achieved. The polymerization rate followed first‐order kinetics with respect to monomer conversion, and the molecular weight of the polymer increased linearly up to high conversion. A novel, fluorescein‐based initiator, a novel fluorescent CTA and two other CTAs comprising of butane thiol trithiocarbonate with cyano (CTA 1) and carboxylic acid (CTA 3) as the end group were synthesized and characterized. The polymerization is observed to be uncontrolled under SET and less controlled under atom transfer radical polymerization (ATRP) condition. CTA 2 and 3 produces better control in propagation compared with CTA 1, which may be attributed to the presence of R group that undergoes ready fragmentation to radicals, at ambient temperature. The poly(cyclohexyl methacrylate) [P(CHMA)] prepared through ATRP have higher fluorescence intensity compared with those from SET‐RAFT, which may be attributed to the quenching of fluorescence by the trithiocarbonate and the long hydrocarbon chain. It is observed that block copolymers P(CHMA‐b‐t‐BMA) produced from P(CHMA) macroinitiators synthesized via SET‐RAFT result in lower polydispersity index in comparison with those synthesized via ATRP. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

单体组成对甲基丙烯酸甲酯/丙烯酸丁酯RAFT共聚合转移常数的影响

采用Z基团为—CH2C6H5的RAFT试剂为链转移剂,AIBN为引发剂,60℃下进行甲基丙烯酸甲酯/丙烯酸丁酯(MMA/BA)的本体RAFT共聚合,并用GPC法测算不同单体组成下低聚物RAFT的链转移常数(Ctr).实验表明,对BA的均聚合,Ctr高达116,但对MMA的均聚合,Ctr约为0.1.在共聚体系中,Ctr与fMMA之间为非线性关系,随着fMMA的增加呈下降趋势.Ctr随单体组成的变化规律可以很好地解释不同单体组成下RAFT共聚合中分子量及其分布随转化率变化的规律.     

Preparation and Characterization of PMMA/MMT Organic-Inorganic Hybrid Materials via RAFT Polymerization

In this article, the poly(methyl methacrylate)/montmorillonite (PMMA/MMT) organic-inorganic hybrid materials were prepared by conventional free radical polymerization and reversible addition-fragmentation chain transfer (RAFT) polymerization, respectively. The kinetics comparison of these two polymerizations was studied. The PMMA/MMT hybrid materials were characterized by gel permeation chromatography (GPC), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). According to these results, we knew that the polymerization behavior of MMA showed controlled/living radical polymerization (CLRP) characteristics under the control of RAFT agent. The incorporation of RAFT agent and MMT nanoparticles improved the thermal properties of polymers, and the thermal stability of polymers increased with increasing content of MMT nanoparticles. The structures and morphologies of PMMA/MMT hybrid materials were characterized by FT-IR, XRD and TEM. These results showed that the MMA monomer can be initiated and propagated in the clay layers of MMT via the control of RAFT agent, and then the exfoliated structure was obtained for the hybrid materials.     

Efficient Synthesis of Poly(acrylic acid) in Aqueous Solution via a RAFT Process

The direct polymerization of acrylic acid (AA) in aqueous solution for high molecular weight by means of living radical polymerization is still difficult. Here, AA was polymerized homogeneously in water by a reversible addition-fragmentation transfer polymerization (RAFT) in the presence of a water-soluble trithiocarbonate as a RAFT agent. Various ratios [AA]:[RAFT agent] were investigated to aim at different molecular weights. The polymerization exhibited living free-radical polymerization characteristics at different ratios [AA]: [RAFT agent]: controlled molecular weight, low polydispersity and well-suited linear growth of the number-average molecular weight, M _n with conversion. The chain transfer to solvent or polymer was suppressed during the polymerization process, thus high linear PAA with high molecular weight and low PDI can be obtained. Moreover, using the generated PAA as a macro RAFT agent, the chain extension polymerization of PAA with fresh AA displayed controlled behavior, demonstrated the ability of PAA to reinitiate sequential polymerization.     

Modification of RAFT‐polymers via thiol‐ene reactions: A general route to functional polymers and new architectures

An investigation into the aminolysis of ω‐end groups of RAFT‐polymers and simultaneous thiol‐ene reactions with ene‐bearing compounds is described. Three different polymers, P(MMA), P(HPMA), and P(NIPAAm), with low PDIs were synthesized using dithiobenzoate and trithiocarbonate RAFT agents. P(NIPAAm) synthesized with trithiocarbonate RAFT agent and P(HPMA) synthesized with dithiobenzoate RAFT agent were both functionalized with a methacrylate‐modified mannose and a maleimide‐modified biotin via one‐pot simultaneous aminolysis and thiol‐ene reactions with product yields above 85%. The presence of ene‐compounds during aminolysis was shown to prevent the formation of disulfide interchain crosslinking. Using the same approach, P(MMA), P(HPMA), and P(NIPAAm) were converted to (meth)acrylate macromonomers with high yields (>80%). In the case of P(MMA), the simultaneous aminolysis and thiol‐ene addition prevented any intrachain side reactions, i.e., thiolactone formation. New architectures such as graft and block copolymers were successfully generated from the macromonomers. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3773–3794, 2009     

Perylene as a visible light photoredox catalyst for photoinduced electron transfer-reversible addition-fragmentation chain transfer (PET-RAFT) polymerization of MMA

Abstract

The organic photocatalyst, perylene, was used to mediate photoinduced electron transfer (PET) reversible addition-fragmentation chain transfer polymerization (RAFT) of methyl methhacrylate (MMA) under light irradiation in N,N-dimethylformamide (DMF) at 25°C with 4-cyanopentanoic acid dithiobenzoate (CPADB) as chain transfer agent (CTA). Kinetic studies confirmed that the polymerization obeyed the first order kinetic m'odel. The production of PMMAs with a good control of molecular weights (M_n,GPC) and narrow polymer molecular weight distribution (M_w/M_n) were obtained. It is found that well-controlled PET RAFT polymerization of MMA can be manipulated even with the amount of perylene decreasing to ppm level. No polymer was obtained in the absence of light irradiation, implying that the model of PET RAFT polymerization of MMA is an ideal light “on”-“off” switchable system. Furthermore, the speed of PET RAFT polymerization of MMA was also finely tunable by the external light irradiation intensity. The resultant PMMA macro-CTA was characterized by ¹H nuclear magnetic resonance spectrum (¹H NMR) and gel permeation chromatography (GPC). The accessibility of the high end group fidelity was further demonstrated by chain extension experiments.     

R‐RAFT approach for the polymerization of N‐isopropylacrylamide with a star poly(ε‐caprolactone) core

Reversible addition‐fragmentation chain transfer (RAFT) polymerization is a more robust and versatile approach than other living free radical polymerization methods, providing a reactive thiocarbonylthio end group. A series of well‐defined star diblock [poly(ε‐caprolactone)‐b‐poly(N‐isopropylacrylamide)]₄ (SPCLNIP) copolymers were synthesized by R‐RAFT polymerization of N‐isopropylacrylamide (NIPAAm) using [PCL‐DDAT]₄ (SPCL‐DDAT) as a star macro‐RAFT agent (DDAT: S‐1‐dodecyl‐S′‐(α, α′‐dimethyl‐α″‐acetic acid) trithiocarbonate). The R‐RAFT polymerization showed a controlled/“living” character, proceeding with pseudo‐first‐order kinetics. All these star polymers with different molecular weights exhibited narrow molecular weight distributions of less than 1.2. The effect of polymerization temperature and molecular weight of the star macro‐RAFT agent on the polymerization kinetics of NIPAAm monomers was also addressed. Hardly any radical–radical coupling by‐products were detected, while linear side products were kept to a minimum by careful control over polymerization conditions. The trithiocarbonate groups were transferred to polymer chain ends by R‐RAFT polymerization, providing potential possibility of further modification by thiocarbonylthio chemistry. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

α‐Cyanobenzyl dithioester reversible addition–fragmentation chain‐transfer agents for controlled radical polymerizations

A series of new reversible addition–fragmentation chain transfer (RAFT) agents with cyanobenzyl R groups were synthesized. In comparison with other dithioester RAFT agents, these new RAFT agents were odorless or low‐odor, and this made them much easier to handle. The kinetics of methyl methacrylate radical polymerizations mediated by these RAFT agents were investigated. The polymerizations proceeded in a controlled way, the first‐order kinetics evolved in a linear fashion with time, the molecular weights increased linearly with the conversions, and the polydispersities were very narrow (～1.1). A poly[(methyl methacrylate)‐block‐polystyrene] block copolymer was prepared (number‐average molecular weight = 42,600, polydispersity index = 1.21) from a poly(methyl methacrylate) macro‐RAFT agent. These new RAFT agents also showed excellent control over the radical polymerization of styrenics and acrylates. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1535–1543, 2005     

Sieving polymer synthesis by reversible addition fragmentation chain transfer polymerization

Replaceable sieving polymers are the fundamental component for high‐resolution nucleic acids separation in CE. The choice of polymer and its physical properties play significant roles in influencing separation performance. Recently, reversible addition fragmentation chain transfer (RAFT) polymerization has been shown to be a versatile polymerization technique capable of yielding well‐defined polymers previously unattainable by conventional free‐radical polymerization. In this study, a high molecular weight poly‐(N,N‐dimethylacrylamide) (PDMA) at 765 000 gmol^?1 with a polydispersity index of 1.55 was successfully synthesized with the use of chain transfer agent—2‐propionic acidyl butyl trithiocarbonate in a multistep sequential RAFT polymerization approach. This study represents the first demonstration of RAFT polymerization for synthesizing polymers with the molecular weight range suitable for high‐resolution DNA separation in sieving electrophoresis. Adjustment of pH in the reaction was found to be crucial for the successful RAFT polymerization of high molecular weight polymer as the buffered condition minimizes the effect of hydrolysis and aminolysis commonly associated with trithiocarbonate chain transfer agents. The separation efficiency of 2‐propionic acidyl butyl trithiocarbonate PDMA was found to have marginally superior separation performance compared to a commercial PDMA formulation, POP?‐CAP, of similar molecular weight range.     

Reversible addition–fragmentation chain transfer polymerization of methyl methacrylate in emulsion

Theoretical simulations showed that for controlled/living radical polymerization in an emulsion system, some of the earliest born particles could be superswollen to a size close to 1 μm. We hypothesized that the superswelling of these particles would lead to colloidal instability. Under the guidance of the simulation results, reversible addition–fragmentation chain transfer (RAFT) emulsion polymerization of methyl methacrylate (MMA) was carried out. Experimental results showed that increasing the initiation rate, surfactant level, and targeted molecular weight could improve the colloidal stability of the RAFT polymerization of MMA in an emulsion. The experimental results were in full accord with the theoretical predictions. The poor control of the molecular weight and polydispersity index was found to have a close relationship with the colloidal instability. For the first time, we demonstrated that RAFT polymerization could successfully be implemented with little coagulum, good control of the molecular weight, and a low polydispersity index with the same process used for traditional emulsion polymerization but with higher surfactant levels and initiation rates. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44:2837–2847, 2006     

Study on reversible addition-fragmentation chain transfer (RAFT) polymerization of MMA in the presence of 2-cyanoprop-2-yl 1-dithiophenanthrenate (CPDPA)

The RAFT polymerization of methyl methacrylate (MMA) was carried out in the presence of 2-cyanoprop-2-yl 1-dithiophenanthrenate (CPDPA). The results exhibit controlled polymerization characters: well-controlled molecular weight with narrow polydispersity (minimal value: 1.04) molecular weight linearly increasing with conversion and first-order kinetics of polymerization. The resulting polymer can be used to synthesize methyl methacrylate-styrene copolymer with narrow polydispersity. The effect of molar ratio among MMA/CPDPA/AIBN on polymerization was investigated.