Pre-irradiation induced grafting of styrene into crosslinked and non-crosslinked polytetrafluoroethylene films for polymer electrolyte fuel cell applications. II: Characterization of the styrene grafted films

Crosslinked and non-crosslinked polytetrafluoroethylene films (RX-PTFE and V-PTFE films, respectively) were irradiated by γ-ray and then grafted with styrene in liquid phase. Microscope FT-IR spectroscopy, TGA, solid state ¹³C CP/MAS and high resolution HS/MAS NMR spectroscopy, wide-angle X-ray diffraction (WAXD) study were used to get the structural information of the styrene grafted RX-PTFE and V-PTFE films. From microscope FT-IR spectra of the grafted RX-PTFE films, the “grafting front mechanism” was proved. TGA analysis showed that the grafted films have a small degradation step and two main degradation steps. In the ¹³C CP/MAS NMR spectra of the non-grafted films, there are no signal due to the absence of the hydrogen atom. While in the spectra of the grafted films, there are signals attributed to the polystyrene grafts. In the ¹³C HS/MAS NMR spectra of the grafted films, the relative intensity of the peaks attributed to the polystyrene grafts increased while the relative intensity of the peak attributed to PTFE matrix decreased with the increase in the DOG. From WAXD patterns, the intensity of the crystalline peak decrease with the increase in the DOG. The grafted films were sulfonated by chlorosulfonic acid and the results of highest IEC value exceeded 3.0. Those results will be reported in the near future.     

Cerium(III/IV) and Cerium(IV)–Titanium(IV) Citric Complexes Prepared in Ethylene Glycol Medium

Summary. Cerium(III/IV) and Ce(IV)–Ti(IV) citric complexes were synthesized in ethylene glycol medium under conditions similar to those of the polymerized complex method (PCM). Solution phase ¹H, ¹³C NMR, solid state ¹³C CP MAS NMR and IR spectroscopy, and X-ray powder diffractometry were used to characterize the composition and structure of the synthesized products. Thermal decomposition of the isolated complexes was studied and a scheme of the processes taking place is proposed. Complexes of Ce(III) can be prepared at low temperature (40°C), only. In the presence of Ti(IV) ions, the oxidation takes place even at this temperature. A mixed-metal nature of the Ce(IV)–Ti(IV) complexes is established. The comparison between their composition and the one of analogous lanthanide(III)–Ti(IV) citrates contributes to the elucidation of the complexation process mechanism in the case of the PCM application. The increased charge of the complexation agent in the Ce⁴⁺–Ti⁴⁺ complex (in comparison with Ln ³⁺–Ti⁴⁺ citrates) is “compensated” by the increase of the relative number of the ligands with deprotonated OH group.     

Cerium(III/IV) and Cerium(IV)–Titanium(IV) Citric Complexes Prepared in Ethylene Glycol Medium

Cerium(III/IV) and Ce(IV)–Ti(IV) citric complexes were synthesized in ethylene glycol medium under conditions similar to those of the polymerized complex method (PCM). Solution phase ¹H, ¹³C NMR, solid state ¹³C CP MAS NMR and IR spectroscopy, and X-ray powder diffractometry were used to characterize the composition and structure of the synthesized products. Thermal decomposition of the isolated complexes was studied and a scheme of the processes taking place is proposed. Complexes of Ce(III) can be prepared at low temperature (40°C), only. In the presence of Ti(IV) ions, the oxidation takes place even at this temperature. A mixed-metal nature of the Ce(IV)–Ti(IV) complexes is established. The comparison between their composition and the one of analogous lanthanide(III)–Ti(IV) citrates contributes to the elucidation of the complexation process mechanism in the case of the PCM application. The increased charge of the complexation agent in the Ce⁴⁺–Ti⁴⁺ complex (in comparison with Ln ³⁺–Ti⁴⁺ citrates) is “compensated” by the increase of the relative number of the ligands with deprotonated OH group.     

Synthesis and characterization of synthetic polymer colloids colloidally stabilized by cationized starch oligomers

A method is developed for anchoring enzymatically degraded cationized starch as electrosteric stabilizers onto synthetic latices, using cerium(IV) to create free‐radical grafting sites on the starch. Direct anchoring of debranched starch onto a poly(methyl methacrylate) seed latex yields a latex stabilized by well‐defined oligosaccharides. Using α‐amylase to randomly cleave starch to form (1→4)‐α‐glucans, and a comonomer, N‐isopropyl acrylamide (NIPAM), whose corresponding polymer exhibits a lower critical solution temperature (LCST), creates a means to synthesize block (or graft) oligomers of oligosaccharide and synthetic polymer, which are water soluble at room temperature. Above 30 °C, they become amphiphilic and form self‐emulsifying nanoparticles (sometimes termed “frozen micelles”) from which a synthetic latex is grown after addition of methyl methacrylate, the collapsed NIPAM‐containing entities functioning as a type of in situ seed. This synthesis of stable synthetic latex particles is shown to have a high grafting efficiency. The starch fragments were characterized by ¹H solution‐state NMR before grafting, and ¹³C solid‐state cross‐polarization magic‐angle spinning (CP‐MAS) NMR was used to characterize the starch oligomers actually grafted on the final latex. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1836–1852, 2009     

Mechanism and kinetics studies of carboxyl group formation on the surface of cellulose fiber in a TEMPO-mediated system

2,2,6,6-Tetramethylpiperidine-1-oxyl radical (TEMPO) can selectively oxidize primary hydroxyl groups of cellulose to carboxyl groups. However, the depolymerization also occurs during the process. The kinetics and mechanism of carboxyl group formation on the surface of cellulose fiber oxidized by TEMPO/NaClO₂/NaClO were discussed. The oxidization and depolymerization of cellulose occurred simultaneously, according to analysis of FTIR and ¹³C CP/MAS NMR. The glucuronic acid and some small molecular fragments, formed by hydrolysis or β-elimination during the oxidation, are also discussed. The crystallization index increased and crystal size decreased, as shown by X-ray analysis. The degradation steps in the TEMPO/NaClO₂/NaClO system was discussed, according to carbon conversion analyzed by ¹³C CP/MAS NMR. The oxidation of cellulose can be described well by the kinetics model established based on the degradation of cellulose. It was found that temperature is one of the key parameters for controlling the oxdation and degradation level. The possible mechanism for oxidation of cellulose was composed.     

Study on the interaction between urea and cellulose by combining solid-state 13C CP/MAS NMR and extended Hückel charges

In this article, solid-state ¹³C CP/MAS NMR combined with extended Hückel charges was applied to investigate the interaction between urea and cellulose in the NaOH/urea aqueous solvent system. Direct experimental evidence was provided to support the interaction between urea and cellulose. The solid-state ¹³C CP/MAS NMR results revealed that complicated complexes are formed by urea, NaOH and cellulose in the solution. Excess urea exists in a free state, which explains why 7 wt% NaOH/12 wt% urea/81 wt% H₂O is the optimal ratio selection to dissolve cellulose. Based on the correlation in which the computed extended Hückel charge on carbon of urea is approximately inversely proportional to its ¹³C chemical shift, a possible interaction model of cellulose, NaOH and urea was proposed. Interactions exist between any two of urea, NaOH and cellulose, which results in the cellulose chain being surrounded by NaOH and urea molecules. NaOH and urea may be in the same surface layer of cellulose chains.     

Graft Copolymerization of 4-Vinylpyridine Onto Modified Cellulosic Fibers. the Ceric Ion Concentration Effect

The graft copolymerization of 4-vinylpyridine was carried out on mercerized cellulose and partially carboxymethylated cellulose (PCMC) using eerie ammonium nitrate (CAN) as the initiator. the grafting parameters (grafting efficiency (GE), graft yield (G), and total conversion (C¹)) were studied as a function of CAN concentration. It was shown that by increasing the CAN concentration, G and C, reached a maximum. the graft yields for PCMC were significantly higher than those for mercerized cellulose. the largest GE values appeared for PCMC and mercerized cellulose at low and high CAN concentrations, respectively. the Ce(IV) consumption during grafting increased with rising concentration of CAN, and it was greater in the case of PCMC than of mercerized cellulose. After acid hydrolysis of the polysaccharide backbone, the average molecular weight of grafts was determined viscometrically. Molecular weight decreased with initiator concentration. Graft frequency (GF), on the other hand, increased with CAN concentration. GF for PCMC was higher than that for mercerized cellulose. Ce(IV) consumption increased with CAN concentration and it was lower for mercerized cellulose than that consumed during grafting on PCMC. After that, the effect of CAN concentration on the graft copolymerization onto PCMC was examined while the total nitrate ion concentration was maintained constant at 1.59 M by addition of sodium nitrate. Maximum G, C¹ and Ce(IV) consumption were higher than in the previous case.     

Suitability of Different 13C Solid-state NMR Techniques in the Characterization of Humic Acids

Qualitative and quantitative analyses of humic acids (HAs) with five different ¹³C solid-state NMR techniques were assessed using HAs of various origins and locations. The NMR techniques compared are: (1) direct polarization/magic angle spinning (DP/MAS) at 13 kHz, (2) conventional cross polarization (CP)/MAS at 5 kHz, (3) ramp-CP/MAS at 8 kHz, (4) CP/total sideband suppression (TOSS) at 4.5 kHz, and (5) DP/MAS corrected by CP/spin-lattice relaxation with TOSS. The spectra from the five techniques were first compared qualitatively. Then, each spectrum was divided into eight regions for quantitative evaluation. DP/MAS spectra were used as quantitative references. Ramp-CP/MAS and CP/TOSS spectra gave consistently better results than those of the conventional CP/MAS spectra at a ¹³C frequency of 75 MHz, which were incorrect due to spinning sidebands. CP/MAS at low magnetic fields (22.6 and 50.6 MHz ¹³C frequency) indicated improved integration results but lower resolution. Correction factors calculated by comparison with DP/MAS will be useful to convert the non-quantitative peak areas in the CP/TOSS and ramp-CP/MAS spectra into more quantitative results.     

Application of solid-state NMR (13C and 29Si CP/MAS NMR) spectroscopy to the characterization of alkenyltrialkoxysilane and trialkoxysilyl-terminated polyisoprene grafting onto silica microparticles

The solid-state Nuclear Magnetic Resonance (NMR) was used to characterize surfaces of silica gels chemically modified by alkenyltrialkoxysilanes and trialkoxysilyl terminated 1,4-polyisoprenes. The formation of covalent bonds created between alkoxy functional groups from alkenyltrialkoxysilane or trialkoxysilyl-terminated 1,4-polyisoprene and silanol groups on silica was clearly demonstrated by means of ¹³C and ²⁹Si CP/MAS NMR spectroscopy. Quantitative data, including calculation of the grafting yields in relation with the initial silanol concentrations, were also obtained by using solid-state ²⁹Si-NMR leading to a final well-defined characterization of the silica surfaces. A relatively good agreement was noticed between the grafting yields calculated from ²⁹Si-NMR spectra and those determined from other analytical techniques such as Wijs titration or elementary analysis. The reactivity of the various silica silanols towards each coupling agent was clearly characterized and estimated, as were the proportions of the various grafted structures formed at the silica surface. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36 : 437–453, 1998     

Cold NaOH/urea aqueous dissolved cellulose for benzylation: Synthesis and characterization

Cold NaOH/urea aqueous dissolved cellulose was studied for the synthesis of benzyl cellulose by etherification with benzyl chloride. By varying the molar ratios of benzyl chloride to OH groups in cellulose (1.5–4.0) and reaction temperatures (65–70 °C), benzyl cellulose with a degree of substitutions (DS) in the range of 0.29–0.54 was successfully prepared under such mild conditions. The incorporation of benzyl groups into cellulose was evidenced by multiple spectroscopies, including FT IR, ¹H NMR, ¹³C NMR, CP/MAS ¹³C NMR and XRD. In addition, the thermal stability and surface morphology of the benzyl cellulose was also investigated with regard to the degree of substitution. The results indicated that the benzyl cellulose product with a low DS (0.51) in the present study reached the same solubility in many organic solvents as compared to those prepared in heterogeneous media. After benzylation, the sample decomposed at a lower temperature with a wider temperature range, which indicated that the thermal stability of benzyl cellulose was lower than that of the native cellulose. In addition, benzylation resulted in a pronounced reduction in crystallinity as well as a fundamental alteration of morphology of the native cellulose.     

CERIC ION INITIATED GRAFTING ON CELLULOSE FROM BINARY MIXTURE OF ACRYLONITRILE AND METHYLACRYLATE

The Ce(IV)-ion induced grafting on cellulose from the binary mixture of acrylonitrile-methylacrylate has been investigated in heterogeneous and acidic conditions at 25 ± 0. 1°C. Various grafting parameters were evaluated as a function of molarity, feed composition, reaction time, and concentration of ceric ion at constant concentration of nitric acid in the feed. The higher fraction of acrylonitrile in the grafted chains than the feed has indicated the synergistic effect of methylacrylate taken in the feed along with acrylonitrile. IR and elemental analysis for nitrogen contents in the synthesized copolymers were used to determine the composition of the grafted copolymers. The reactivity ratios of acrylonitrile and methylacrylate have been determined by the Mayo and Lewis method and are found to be 1.45 and 0.9, respectively. The grafting parameters have shown increasing trends on varying feed composition (f_AN) from 0.25 to 0.80 and varying monomer concentration from 0. 6 to 5 4 mol dm^?3. The number of grafted moles of synthetic polymer (N_g) on cellulose were found to be dependent on molarity, feed composition, and ceric ion concentration. The experimental results have clearly indicated that maximum fraction of the feed was consumed in the formation of grafted copolymer chains in comparison to the homocopolymers and homopolymers. Estimation of ceric ion disappearance as a function of reaction time has clearly suggested that grafting on cellulose is initiated by the reactive sites generated through hydrogen ion abstraction by single electron transfer process.     

13C-NMR study of cellulose derivatives in the solid state

The application of NMR for natural organic compounds has been carried out from the early history of NMR. But they reported on the liquid state NMR and the samples were limited to the materials which dissolved in proper solvents. It has been possible to measure the samples in the solid state in 1970s and is widely used as a familiar analytical method in 1980s. Whereas some of the data is inadequate, concerning cellulose derivatives, in particular, only nitrate and acetate were reported by Patterson¹ and Doyle,² respectively. In this paper, the ¹³C CP/MAS solid state NMR spectra of several cellulose derivatives are shown and the relationship between the structure and spectrum is discussed.     

Study of the ceric ion behavior on the initiation of butyl acrylate polymerization onto amylose

A study of the Ce(IV) ion consumption during graft polymerization of butyl acrylate with amylose was carried out. The Ce(IV) consumed was ca. 80% and the ratio of Ce(IV) to anhydroglucose units was 1/15. Poly(butyl acrylate) (PBA) chains were isolated from the grafted copolymer by the perchloric acid hydrolysis method. The molecular distribution was obtained by gel permeation chromatography (GPC). The number-average molecular weight (M_n) of the grafted chains was 276,000 and the weight-average molecular weight (M_w) was 1,320,000. The total number of grafted chains (mmol) ranged from 0.4410^?3 to 8.710^?3 (amylose from 0.08 g to 1.23 g). Frequency of grafting ranged from 1042 to 704.     

CP/MAS (13)C NMR study of cellulose and cellulose derivatives. 1. Complete assignment of the CP/MAS (13)C NMR spectrum of the native cellulose

The precise assignments of cross polarization/magic angle spinning (CP/MAS) (13)C NMR spectra of cellulose I(alpha) and I(beta) were performed by using (13)C labeled cellulose biosynthesized by Acetobacter xylinum (A. xylinum) ATCC10245 strain from culture medium containing D-[1,3-(13)C]glycerol or D-[2-(13)C]glucose as a carbon source. On the CP/MAS (13)C NMR spectrum of cellulose from D-[1,3-(13)C]glycerol, the introduced (13)C labeling were observed at C1, C3, C4, and C6 of the biosynthesized cellulose. In the case of cellulose biosynthesized from D-[2-(13)C]glucose, the transitions of (13)C labeling to C1, C3, and C5 from C2 were observed. With the quantitative analysis of the (13)C transition ratio and comparing the CP/MAS (13)C NMR spectrum of the Cladophora cellulose with those of the (13)C labeled celluloses, the assignments of the cluster of resonances which belong to C2, C3, and C5 of cellulose, which have not been assigned before, were performed. As a result, all carbons of cellulose I(alpha) and I(beta) except for C1 and C6 of cellulose I(alpha) and C2 of cellulose I(beta) were shown in equal intensity of doublet in the CP/MAS spectrum of the native cellulose, which suggests that two inequivalent glucopyranose residues were contained in the unit cells of both cellulose I(alpha) and I(beta) allomorphs.     

Antibacterial modification of cellulose fibers by grafting β-cyclodextrin and inclusion with ciprofloxacin

Antibacterial-modified cellulose fiber was prepared by covalently bonding β-cyclodextrin (β-CD) with cellulose fiber via citric acid (CA) as crosslinking agent, followed by the inclusion of ciprofloxacin hydrochloride (CipHCl) as antibiotic. Effects of reaction time, temperature, concentration of β-cyclodextrin citrate (CA-β-CD) and pH on the grafting reaction were investigated, and the grafting ratio of β-CD onto cellulose fibers was 9.7 % at optimal conditions; the loading and releasing behaviors of CipHCl into/from β-CD grafted cellulose fibers were also revealed, the load amount of CipHCl into grafted cellulose fibers increased remarkably, and the release of CipHCl from the grafted cellulose fibers was prolonged. The microstructure, phase and thermal stability of modified cellulose fibers were characterized by FT-IR, ¹³C CPMAS NMR, X-ray diffraction and TGA. Considerably longer bacterial activity against E. coli and S. aureus was observed for grafted fibers loading CipHCl compared to virgin ones. Optical and mechanical properties of the paper sheets decreased generally with more antibacterial-modified fibers added.     

Modification and intercalation of layered zirconium phosphates: a solid‐state NMR monitoring

Several layered zirconium phosphates treated with Zr(IV) ions, modified by monomethoxy‐polyethyleneglycol‐monophosphate and intercalated with doxorubicin hydrochloride have been studied by solid‐state MAS NMR techniques. The organic components of the phosphates have been characterized by the ¹³C{¹H} CP MAS NMR spectra compared with those of initial compounds. The multinuclear NMR monitoring has provided to establish structure and covalent attachment of organic/inorganic moieties to the surface and interlayer spaces of the phosphates. The MAS NMR experiments including kinetics of proton‐phosphorus cross polarization have resulted in an unusual structure of zirconium phosphate 6 combining decoration of the phosphate surface by polymer units and their partial intercalation into the interlayer space. Copyright © 2016 John Wiley & Sons, Ltd.     

Grafting onto cellulose. VIII. Graft copolymerization of poly(ethylacrylate) onto cellulose by use of redox initiators. Comparison of initiator reactivities

In an attempt to compare the relative reactivities of different redox systems in graft copolymerization of vinyl monomers onto cellulose, we studied grafting of ethylacrylate (EA) in aqueous medium by using the well-known redox intiator, ferrous ammonium sulfate–potassium persulfate (FAS–KPS) system, and its reactivity was compared with that of Fenton's reagent (Fe²⁺ ?H₂O₂) towards grafting of EA onto cellulose. Optimum conditions for affording maximum grafting were evaluated and percent grafting is expressed as functions of different reaction variables. Evidence of grafting was obtained from IR spectroscopic measurements, SEM, and TGA studies of the grafted and ungrafted cellulose. A plausible explanation for the observed reactivity pattern shown by (FAS–KPS) and (FAS–H₂O₂) redox systems is offered. Fenton's reagent (Fe²⁺ ?H₂O₂) was found to be several times more reactive than (FAS–KPS) redox system.     

Effects of TEMED and EDTA on the structural and mechanical properties of NIPAAm/Na+MMT composite hydrogels

N‐isopropyl acrylamide (NIPAAm) hydrogels are known as thermosensitive crosslinked polymer networks. In this work, the network parameters of their composites, i.e., NIPAAm/sodium montmorillonite (NIPAAm/Na⁺MMT) hydrogels synthesized by free radical solution polymerization in the presence of two different types of accelerator (tetramethyl ethylenediamine (TEMED) and ethylenediamine tetraacetic acid (EDTA)) and initiator (potassium persulphate (K₂S₂O₈) and cerium ammonium nitrate ((NH₄)₂Ce(NO₃)₆), Ce(IV)) using five different clay content (in the range of 1.0–5.0 wt % of total monomer concentration) at 25 °C were presented and discussed. FTIR spectra, XRD patterns, SEM photographs, and network parameters of the samples indicated that the presence of COOH groups on EDTA molecules was resulted in the formation of exfoliated structures and the activity of EDTA/KPS redox pair was higher than those of TEMED/KPS and EDTA/Ce (IV) pairs. The compression moduli (G) of the hydrogels initiated with EDTA/Ce(IV) redox pair showed smooth and continual changings with increase in Na⁺MMT content (for swelling equilibrium at 25 °C) on the contrary of EDTA/KPS and TEMED/KPS pairs. It might be related to low initiator efficiency of cerium ammonium nitrate than KPS molecules, having higher effective crosslinking density with increasing clay content. On the other hand, the G moduli of NIPAAm/Na⁺MMT hydrogels (above their phase transition temperature) initiated with TEMED/KPS redox pair were higher than the others because of the more hydrophobic nature of TEMED molecules. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1256–1264, 2010     

Synthesis,characterization and properties of methylaminocellulose

Homogeneously prepared tosylcelluloses (TC) with degrees of substitution (DS) of DS_Tos 0.1–1.8 were used as intermediates for the synthesis of methylaminocelluloses (MAC) by nucleophilic substitution with methylamine. TC with DS_Tos up to 1.1 were shown to be valuable intermediates for selective synthesis of MAC with DS_MA varying from 0.1 to approximately 1. No nucleophilic substitution was observed at higher DS_Tos. At the chosen reaction conditions (60 °C, 48 h) residual tosyl moieties remained unchanged and little hydrolysis took place. The samples obtained were characterized by means of elemental analysis, FTIR and ¹³C CP/MAS NMR spectroscopy. ¹³C CP/MAS NMR spectroscopy was found to be an efficient tool for quantification of DS_MA. Furthermore, the swelling behaviour in water was investigated and preliminary tests concerning the bilirubin adsorption capacity of MAC were carried out.     

Structure of ultrahigh-molecular-weight polyethylene in the solid state as studied by variable-temperature 13C CP/MAS NMR spectroscopy

In order to obtain some insight into the structure of an ultrahigh-molecular-weight polyethylene sample, ¹³C CP/MAS NMR experiments have been carried out at temperatures from 23 to ?108°C. The peak for the crystalline component moves upfield with a decrease in temperature, which is contrary to what was reported previously for a melt-crystallized polyethylene sample. On the basis of x-ray diffraction results and quantum-chemical calculations, it is suggested that the methylene carbons are in the distorted orthorhombic form at low temperatures.