Sol–gel derived organic–inorganic composites recognizing molecular asymmetry

A new type of optically active organic-inorganic composite was prepared by a sol–gel method in which tetraethoxysilane (TEOS) is hydrolyzed in the presence of an optically active organic compound (d-lactose, d-glucose, d-sorbitol, d-fructose, l-tartaric acid, l-malic acid, or l-mandelic acid). Optical resolution of tris(pentane-2,4-dionato)metal complexes was performed by using the new sol–gel derived composites, composites prepared by conventional techniques (kneading with l-lactose, l-fructose or l-tartaric acid, and impregnation with an l-lactose, l-fructose or l-tartaric acid solution) and the optically active organic compounds themselves. The sol–gel derived composites showed much higher optical resolution abilities than the composites prepared by conventional techniques. In addition, the optically active organic compounds could not resolve the racemate into the enantiomers under similar conditions. X-ray diffraction and NMR results disclosed that an optically active organic compound in the sol–gel derived composite is highly dispersed, most likely, because it bonds to silicon atoms. Thus, it was deduced that optically active molecules dispersed at a molecular level recognize the chirality of the metal chelate compound. The high-resolution ability of the sol–gel derived composites arises from the combined effect of the silica support (adsorbing power) and the highly dispersed molecules (chiral recognition power).     

Composite of SiO2 and Hydrogel Having Microphase Separated Structure: Physical Properties Dependence on pH

Abstract

Organic-inorganic composite gel was prepared by using PEG-modified urethane acrylate (PMUA) gel and tetraethoxysilane (TEOS). PMUA gel was prepared by the phase-inversion emulsion polymerization of PMUA emulsion. The gelation of PMUA emulsion using this method enables PMUA gel to swell with H₂O, TEOS, and ethanol. Hydrolysis and condensation reaction rates of the sol-gel process are strongly influenced by the pH controlled by catalysts such as HCl and NH₄OH. Additionally, the morphology on the cross section of composite and the amount of silica ingredient incorporated into the composite gel were dependent on solvent, the molar ratio of H₂O to TEOS, as well as the pH value.

As the silica content increased, due to hydrogen bonds interacting between PMUA gel and SiO₂, particles, the tensile strength of composites considerably increased, whereas the elongation at break decreased. The incorporation of silica ingredient in PMUA gel/silica composites was verified with FTIR/ATR and SEM. The amount of the silica component in the composite was indirectly investigated by using TGA thermal analysis.     

Synthesis of spherical submicron-sized magnetite/silica nanocomposite particles

This paper describes a method for fabricating spherical submicron-sized silica particles that contained magnetite nanoparticles (magnetite/silica composite particles). The magnetite nanoparticles with a size of ca. 10 nm were prepared according to the Massart method, and were surface-modified with carboxyethylsilanetriol. The fabrication of magnetite/silica composite particles was performed in water/ethanol solution of tetraethoxyorthosilicate with ammonia catalyst in the presence of the surface-modified magnetite nanoparticles. The magnetite/silica composite particles with a size of ca. 100 nm were successfully prepared at 0.05 M TEOS, 15 M water, and 0.8 M ammonia with injection of the magnetite nanoparticle colloid at 2 min after the initiation of hydrolysis reaction of TEOS. Magnetite concentration in the composite particles could be raised to 17.3 wt.% by adjustment of the injected amount of the magnetite colloid, which brought about the saturation magnetization of 7.5 emu/g for the magnetite/silica composite particles.     

Silica coating of silver nanoparticles using a modified Stober method

Silver nanoparticles prepared through a borohydride-reduction method were directly coated with silica by means of a seeded polymerization technique based on the Stober method. Various amine catalysts were used for initialization of a sol-gel reaction of TEOS with no need for a prior surface modification. Use of dimethylamine (DMA) as a catalyst was found to be necessary to obtain a proper coating. The silica shell thickness was varied from 28 to 76 nm for TEOS concentrations of 1-15 mM at 11.1 M water and 0.8 M DMA. The optical spectra of the core-shell silver-silica composite particles show a qualitative agreement with predictions by Mie theory.     

Chemical tailoring of porous silica xerogels: local structure by vibrational spectroscopy

Monolithic porous silica xerogels were synthesized by the sol-gel process, and their local structure was analysed by vibrational spectroscopy. The silica alcogels were prepared by a two-step hydrolytic polycondensation of tetraethoxysilane (TEOS) in isopropanol, with a water/TEOS molar ratio of 4. The hydrolysis step was catalysed by hydrochloric acid (HCl), with different HCl/TEOS molar ratios (ranging from 0.0005 to 0.009), and the condensation step was catalysed by ammonia (NH(3)), with different NH(3)/HCl molar ratios (ranging from 0.7 to 1.7). After appropriate ageing, the alcogels were washed with isopropanol and subcritically dried at atmospheric pressure. The diffuse reflectance infrared Fourier transform (DRIFT) spectra were analysed in terms of the main siloxane rings that form the silica particles, taking into account the splitting of the nu(as)Sibond;Obond;Si mode into pairs of longitudinal and transverse optic components, by long-range Coulomb interactions. It was proven that the proportion of residual silanol groups (which correlates with hydrophilicity), and the fraction of siloxane 6-rings (which correlates with porosity) may be tailored by adequate catalytic conditions, mostly by the hydrolysis pH. This was explained in terms of the reactions' mechanisms taking place in the two-step sol-gel process followed.     

Polyimide-silica Hybrids: Structural and Morphological Investigations

Polyimide (PI) containing pendant hydroxyl functional groups have been employed for preparation of PI-silica hybrids through the sol-gel process. A stoichiometric amount of pyromellitic dianhydride (PMDA) was reacted with a mixture of oxydianiline (ODA) and 3,3′-diamino-4,4′-dihydroxybiphenyl (DAHP) in dimethylacetamide (DMAc) solvent to prepare the precursor poly(amic acid) (PAA) solution for the PI. Various proportions of tetraethoxysilane (TEOS) were mixed with PAA to prepare PI-silica hybrids through sol-gel process. The structure and morphology of these hybrids were investigated with field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), optical surface profilometery, and Fourier transform infrared (FTIR) spectroscopy and compared with the one in which the matrix was prepared from PMDA and ODA with no pendant hydroxyl functionalities. Formation of silica lean and silica rich phases (SLP and SRP) as a result of formation of nano-sized silica clusters with diffused boundaries, dispersed in the matrix and their agglomerates, respectively, along with totally different morphology suggest a strong influence of hydroxyl groups in controlling the morphology of PI-silica hybrids. A model namely “Retain and React” has been introduced to explain observed structure.     

Flexible free-standing films morphology characterization: PVA/silica polymer network dispersed cholesteric liquid crystals films by sol-gel method

A novel flexible free-standing films of polyvinyl alcohol (PVA)/silica polymer network dispersed cholesteric liquid crystals (CLC) have been prepared by the sol-gel process. In the hydrolysis of silicon alkoxides tetraethoxysilane (TEOS) processes, the silica having -OH with the -OH groups on PVA formed polymer networks with Si-O-C bonds by dehydration. The cholesteric liquid crystals were incorporated into the networks. The free-standing films were obtained by the spin-coating method. In order to improve the compatibility and microstructure of the cholesteric liquid crystals with PVA/silica polymer networks, the amphiphilic compound of hexadecyl trimethyl ammonium bromide (HDTMA) was introduced into the forming film solutions. Effects of the different ratios of raw materials on the structure of films were investigated. The microscopic morphology of free-standing films and the uniform dispersion of CLCs in the films have been characterized by polarizing optical microscopy (POM), the field emission scanning electron microscope (FESEM), Fourier transform infrared (FT-IR) spectrometer and atomic force microscope (AFM). The free-standing films exhibiting excellent CLC droplets dispersion, mechanical stability, and good flexibility could be useful for flexible displays, switchable optical elements and smart windows.     

The effect of silica morphology on properties of PVA/silica nano-composites

Two kinds of poly(vinyl alcohol)(PVA)-silica composites were prepared with different methods. One composite was prepared by directly mixing PVA with 80 nm silica nano-particles which were made from tetraethoxysilane(TEOS). The another was obtained by the mixing PVA and hydrolyzed TEOS in the presence of acid-catalyst. The properties of the two PVA/silica hybrids were characterized by means of scanning electron microscopy(SEM), UV-Visible spectroscopy,solubility tests, limiting oxygen index(LOI) test, tensile test and dynamical mechanical analysis(DMA), respectively. The results indicate that PVA-TEOS composites(PT for short) display more transparency than PVA-silica nano-particles hybrids(PS for short). At the same time, The PT composites presented more excellent performance than PS in water resistance, fire resistance and mechanical properties. Moreover, the Tg of PT increased with increasing TEOS content, while that of PS decreased.     

Preparation of “Green” Composites by the Sol-Gel Process: In Situ Silica Filled Natural Rubber

“Green” composites with different amounts of in situ silica nano-particles were prepared by a sol-gel reaction of tetraethoxysilane (TEOS) in natural rubber (NR). The control of swelling degree of TEOS in NR and concentration of n-butylamine in water was useful to change the amount of generated in situ silica in the uncured NR matrix. In situ silica up to 42 parts per hundred rubber by weight (phr) was successfully filled in the NR matrix. The particle size of in situ silica became larger with the increase of silica content from ca. 10 nm to ca. 40 nm for 10 phr--40 phr loadings in the NR matrix, respectively. Even when the amount of in situ silica content was high, the dispersion of in situ silica particles was more homogeneous than that of commercial silica (VN-3). The reinforcement effect of the in situ silica for NR vulcanizates increased with increasing the in situ silica content.     

Preparation and photophysics of polyimide/silica organic/inorganic hybrid composites

In this work, polyimide/silica hybrid composites were prepared by the sol-gel reaction of tetraethoxysilane(TEOS) and the thermal imidization of poly(amic acid) from 3,3′,4,4′-biphenyltetracarboxylic dianhydride(BPDA) and 4,4′-oxydianiline(ODA), and their photophysical properties were investigated using a fluorescence spectroscopy. It was found that the intrinsic fluorescence of poly(4,4′-oxydiphenylene-3,3′4,4′-biphenyltetracarboximide)(BPDA-ODA) such as emission intensity and emission wavelength depends strongly on the changes in the molecular conformations during the sol-gel reaction and the thermal imidization. In conclusion, we found that the fluorescence spectroscopy can provide an insight into how the intermolecular or intramolecular interaction of polyimide in the hybrid composite system is affected by the silica contents, depending on the sample states.     

Bridged silsesquioxanes containing a chiral diphosphine substructure. Catalytic properties in asymmetric hydrogenation

Bridged silsesquioxanes with asymmetric catalytic properties are described. These new silica-based materials are obtained by the sol-gel hydrolysis of an organosilylated chiral compound bearing rhodium-complexed diphosphine ligands. The incorporation of the organometallic species in various hybrid networks was achieved upon co-hydrolysis of the latter silylated ligands with TEOS or with 1,4-bis(trimethoxysilyl)benzene. These amorphous hybrids have been tested as enantioselective catalysts for the hydrogenation of (Z)α-(acetamido)cinnamic acid to the corresponding aminoacid and the results were compared with that obtained from the complexed precursor in homogeneous medium and related grafted silica. Enantioselectivities slightly higher than for homogeneous reaction were obtained in the case of the heterogeneous catalysts prepared by the direct hydrolysis of the rhodium-complexed diphosphine compound or by its co-hydrolysis with 1,4-bis(trimethoxysilyl)benzene. Conversely, a significant decrease in selectivity was observed when the organometallic species was immobilised in silica or grafted at the surface of silica.     

Octyl-functionalized hybrid silica monolithic column for reversed-phase capillary electrochromatography

Hybrid silica monolithic stationary phase functionalized with octyl groups was synthesized by a two-step acid/base-catalyzed hydrolysis/co-condensation of tetraethoxysilane (TEOS) and n-octyltriethoxysilane (C(8)-TEOS). The influences of determining factors in the sol-gel process such as the monomer ratio and water content on the monolith formation were systematically investigated. An increase in the TEOS/C(8)-TEOS ratio in the polymerization mixture shifted the pore size distribution towards smaller pore diameter with larger pore volume. The optimal TEOS/C(8)-TEOS volume ratio was found to be 90/50, under which condition the median pore diameter of the monolith was around 1.0 microm with pore volume of 3.25 cm(3)/g. The chromatographic characteristics of the monolithic column prepared with the optimized fabrication condition were studied. Some aromatic compounds including alkylbenzenes, polycyclic aromatic hydrocarbons (PAHs) and phenols were successfully separated on the octyl-functionalized silica monolithic column with high column efficiency up to 180,000 plates/m.     

Preparation and characterization of composites built of poly(N-benzophenoyl methacrylamide-co-N-hydroxyethyl acrylamide) cores and silica raspberry-like shells with dual orthogonal functionality

The design and fabrication of novel poly(N-benzophenoyl methacrylamide-co-N-hydroxyethyl acrylamide)@SiO(2) composites are reported herein. These core-shell composites demonstrate orthogonal functionality, composed of photoreactive cores, containing a benzophenone (BPh) moiety and silica (SiO(2)) shells, enabling the utilization of the free hydroxyl groups via silane-based chemistry. The co-polymer cores, which are 1.28μm in diameter, are first obtained by dispersion polymerization of photoreactive (N-benzophenoyl methacrylamide) (polyBPMA) and N-Hydroxyethyl acrylamide (HEAA). Next, silica seeds with a 42nm diameter are deposited onto the surfaces as a result of the hydrolysis and the condensation of tetraethyl orthosilicate (TEOS) in a basic condition. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), FT-infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), UV-spectrophotometry, X-ray photoelectron spectroscopy (XPS), and ζ-potential measurements were used to characterize the composites. The morphology and surface smoothness of the deposited silica nanoparticles (NPs) were found to strongly depend on a number of parameters such as the pH value of the medium, TEOS concentration, and the temperature.     

Hybrid Silica Gel-Polytetrahydrofuran Thin Films

The sol-gel process has been used to prepare hybrid silica gel-polytetrahydrofuran (PTHF) thin films, using tetraethylorthosilicate (TEOS) as the precursor. The films were prepared by spin-coating, and characterized by profilometry, transmission FTIR and SEM. Film properties were conditioned by the preparation procedure as well as by the initial recipe, namely the solvent, polymer content and molecular weight. Evidence was obtained of the participation of the polymer in the condensation step of the process, interacting by hydrogen bonds with hydroxyl groups of the silicate network.     

Atomistic Modeling of Silica Based Sol-Gel Processes

Density Functional Theory is used to study water, methanol, ethanol, TMOS, and TEOS molecules and the most important silica clusters participating in sol-gel processes. Calculated bond lengths, bond angles and electric dipole moments compare well with experimental data. The energy of these molecules is reported and used to discuss the energetics of the hydrolysis and condensation reactions. Molecular Dynamics is employed to simulate liquid water, methanol, ethanol, TMOS, TEOS and experimental sol-gel solutions. Calculated densities and enthalpies of vaporisation compare well with experimental data. Preliminary results are presented for MD simulations of sol-gel solutions.     

聚合物模板微球表面电性对中空二氧化硅微球形貌的影响

分别以过硫酸钾和偶氮二异丁基脒盐酸盐为引发剂,以聚乙烯吡咯烷酮(PVP)为分散剂,在水中引发苯乙烯聚合制备了2种表面分别带负电性和正电性基团的聚苯乙烯(PS)模板微球.在氨水催化下,利用正硅酸乙酯的水解缩合,形成PS/SiO_2复合微球,去除模板后得到中空SiO_2微球,并对其进行FTIR、电子显微镜、TGA以及氮气吸附等分析表征.结果表明,PS模板微球表面的电性决定了OH-的分布,从而导致PS模板微球表面SiO_2壳层不同的形成机制.当以表面带负电的PS微球为模板时,可得到树莓状的中空SiO_2微球;而以表面带正电的PS微球为模板时,得到是表面光滑的,具有介孔结构的中空SiO_2微球.     

Magneto-Optical Properties of Silica Gel Containing Magnetite Fine Particles

The magnetic composite materials that consist of transparent matrix and magnetic fine particles are expected to have large residual magnetization and coercive force because of their fine magnetic domain structure, and also to show magneto-optical effects. Silica gels containing magnetite (Fe₃O₄) fine particles were prepared by sol-gel method. The magnetic, optical and magneto-optical properties of the composites were investigated by measurements of magnetization curves, UV-visible spectra and Faraday rotation in visible range. The saturation magnetization of the composite was almost as same as that expected from the amount of magnetite fine particles in it. Although the composites had large and broad absorption at around 400 nm, they still maintained their transparency. The origins of decrement of transparency attributed to the optical absorption of magnetite and scattering due to magnetite fine particles. The whole composites showed positive Faraday rotation under external static magnetic field due to the large contribution of diamagnetic silica gel matrix. Magnetite contributed negative Faraday rotation with maximum at around 470–480 nm to the magneto-optical spectra of the composites.     

Preparation and properties of amino-terminated anionic waterborne-polyurethane-silica hybrid materials through a sol-gel process in the absence of an external catalyst

A series of polymer-silica hybrid materials consisting of amino-terminated anionic waterborne-polyurethane (WPU) and inorganic silica particles have been prepared through a sol-gel process in the absence of an external catalyst. Typically, amino-terminated anionic WPU was first synthesized from polycaprolactone, dimethylol propionic acid, and 4,4′-methylenebis(cyclohexyl isocyanate) with specific molar ratios, followed by further reaction with triethylamine and triethylene tetramine to give as-prepared WPU. The WPU obtained was characterized by FTIR spectroscopy and gel permeation chromatography. Subsequently, a series of hybrid materials with different silica contents were prepared by performing sol-gel reactions with tetraethyl orthosilicate (TEOS) in an amino-terminated WPU matrix without the addition of an external catalyst. This was followed by examination by transmission electron microscopy and ²⁹Si solid-state NMR. The terminated primary amine groups attached to the as-prepared WPU chains functioned as an internal base catalyst for the sol-gel process of TEOS. The effect of composition on the thermal stability, mechanical strength, surface wettability, and optical clarity of the hybrid materials was evaluated by the thermogravimetric analysis, dynamic mechanical analysis, contact angle measurement, and UV-visible transmission spectroscopy, respectively.     

Effect of Processing Temperature on Gelation and Physical Properties of Low Density TEOS Based Silica Aerogels

In the present paper the experimental results of the effect of sol-gel processing temperature on the physical properties of the TEOS based silica aerogels are reported and discussed. The aerogels were produced by the two step sol-gel process at various temperatures in the range of 26–70^∘;C followed by supercritical drying using methanol solvent extraction. A remarkable reduction in the gelation time was observed from three and a half days at room temperature to a mere 18 hours at 50^∘;C. The best quality aerogels in terms of low density and high optical transmission were obtained for 6 hours hydrolysis time. The aerogels were characterized by the measurements of bulk density, volume shrinkage, porosity, refractive index and optical transmission. Monolithic aerogels with ultra low density (∼0.018 g/cm³), extremely high porosity (∼99%) and optimum optical transmission at 700 nm (∼75%) were obtained for the molar ratio of TEOS:MeOH:acidic water:basic water at 1:99:10.42:14.58 respectively.     

Reversible solid optical sensor based on acyclic-type receptor immobilized SBA-15 for the highly selective detection and separation of Hg(II) ion in aqueous media

An acyclic receptor immobilized mesoporous silica (ARMS) was prepared by sol-gel reaction and its optical sensing ability was studied upon the addition of heavy metal ions in aqueous solution.