Determination of dopamine in injections and urine by an enzyme-catalyzed fluorescence quenching method.

A new, sensitive method for determining dopamine has been established based on the principle of fluorescence quenching. A linear relationship is obtained between F(0)/F and the concentration of dopamine in the range of 0.80 -16.00 microg mL(-1). The detection limit was 0.23 microg mL(-1) and the relative stand deviation was 1.54%. The mechanism of the fluorescence quenching has been discussed. Effects of pH, foreign ions, and standing time on the determination of dopamine have been examined. This method is simple and can be used for the determination of dopamine in injections solution of dopamine. The results obtained by this method agreed with those obtained by the official method.     

CuNi/β-环糊精/还原氧化石墨烯修饰电极电化学检测多巴胺

建立了一种循环伏安法制备CuNi/β-环糊精/还原氧化石墨烯修饰玻碳电极(CuNi/β-CD/ERGO/GCE)的方法。通过多巴胺在该修饰电极上的电化学行为发现,该电化学传感器实现了快速、灵敏的测定多巴胺。该传感器用差分脉冲伏安法(DPV)测定多巴胺时,其电化学响应电流与多巴胺浓度在0.01~20μmol/L之间呈线性关系,检测限为8 nmol/L。该传感器用于尿液样品中的多巴胺检测,回收率在95.6%~107.2%之间。     

纳米银比色法检测多巴胺

在银纳米粒子存在下, 多巴胺可还原硝酸银生成银, 导致银纳米粒子粒径增大, 从而使溶液颜色发生改变. 基于此, 提出了一种用于检测多巴胺的纳米银比色法. 随着多巴胺浓度的增大, 溶液的颜色由浅黄色逐渐变为深黄色, 银纳米粒子溶液的吸收峰发生红移且吸光度增大. 在最优实验条件下, 该方法检测多巴胺的线性范围为0.05~16 μmol/L, 检出限为0.04 μmol/L. 该方法操作简单、 灵敏且选择性良好, 可用于人血清中多巴胺的检测.     

Electrocatalytic Application of an Overoxidized Dopamine Film Prepared on a Gold Electrode Surface to Selective Epinephrine Sensing

A dopamine polymer film was prepared ex situ on a bare gold template from a 10 mM dopamine solution in phosphate buffer, pH 7 followed by an overoxidation in 500 mM NaOH. The modified electrode was used for quantitative determination of epinephrine. A linear relationship between epinephrine concentration and current response was obtained in the range between 2 μM and 800 μM with the detection limit of 0.3 μM. The results have shown that using the overoxidized dopamine film it is possible to perform electrochemical analysis of epinephrine without interference of ascorbic and uric acids.     

ZrO2-Graphene-Chitosan nanocomposite modified carbon paste sensor for sensitive and selective determination of dopamine

A sensitive and stable electrochemical sensor was developed by modification of carbon paste electrode with ZrO₂/graphene/chitosan nanocomposite. The modified sensor served as a potential electrocatalytic platform for dopamine. Electrochemical impedance spectroscopy studies indicated reduction of charge transfer resistance at the modified electrode surface thereby facilitating the electron transfer process which resulted in higher current response to dopamine. The electrochemical behavior of dopamine at the modified electrode was studied using cyclic and square wave voltammetry. The maximum current response for the electro-oxidation of dopamine was observed at pH 7.4 and the process was realized to be diffusion controlled. The modified sensor demonstrated linearity in the range 1000–5000 nM, with high sensitivity (22 nA/nM), detection limit of 11.3 nM and selectivity for dopamine in the presence of ascorbic and uric acid which are found to co-exist with dopamine in physiological media. The method was employed for quantification of dopamine in a pharmaceutical formulation.     

多巴胺有序介孔硅表面分子印迹传感器的研制

以多巴胺(DA)为模板,氨基修饰的介孔硅为载体,制得对多巴胺具有特异选择性的表面分子印迹聚合物(MIP)。将所得的MIP制成碳糊电极,用循环伏安法对多巴胺进行检测。在优化实验条件下,传感器的氧化峰电流与多巴胺浓度在1.0×10-7～2.0×10-6mol/L和2.0×10-6～1.0×10-4mol/L范围内呈良好的线性关系,相关系数分别为0.992 5和0.996 9,检出限为1.3×10-9mol/L。该传感器对DA具有较高的灵敏度和选择性,将其用于实际样品检测,结果满意。     

Electrocatalytic oxidation and voltammetric determination of dopamine on a composite film electrode with an iridium deposit

Electrochemical oxidation of dopamine on a composite glassy carbon electrode with an electrodeposited iridium layer coated with a Nafion film was studied. A procedure for voltammetric determination of dopamine on the composite film electrode was developed.     

Simultaneous determination of dopamine and carvedilol in human serum and urine by first-order derivative fluorometry.

A sensitive and selective method for simultaneous determination of carvedilol and dopamine was described. The emission wavelengths of carvedilol and dopamine were at 354 nm and 314 nm with the excitation at 290 nm, respectively. The determination of carvedilol and dopamine by normal fluorometry was difficult because the emission spectra of carvedilol and dopamine were overlapped seriously. The first derivative peaks of carvedilol and dopamine were at 336 nm and 302 nm, respectively. The linear regression equations of the calibration graphs of carvedilol and dopamine were C = 0.000557H-0.00569 and C = 0.00438H-0.0812, with the correlation coefficients were 0.9953 and 0.9988, respectively. The liner range for the determination of carvedilol was 0.002 microg ml(-1) to 0.02 microg ml(-1), and 0.05 microg ml(-1) to 0.6 microg ml(-1) for dopamine. The detection limits were 1 ng ml(-1) for carvedilol and 0.04 microg ml(-1) for dopamine, respectively. The relative standard derivative (RSD) of 4.38% and 4.35% was observed for carvedilol and dopamine, respectively. The recovery of carvedilol was from 95.00% to 106.7% in human serum and from 97.50% to 105.0% in urine sample. The recovery of dopamine was from 100.0% to 102.5% in human serum and from 97.50% to 105.0% in urine sample. This method is simple and can be used for determination of carvedilol and dopamine in human serum and urine sample with satisfactory results.     

Development of an online solid‐phase extraction with liquid chromatography method based on polymer monoliths for the determination of dopamine

Porous polymer monoliths have been used to develop an online solid‐phase extraction with liquid chromatography method for determination of dopamine in urine as well as for a continuous monitoring of dopamine in flowing system. A polymerization mixture containing 4‐vinylphenylboronic acid monomer has been used to prepare a trapping column based on specific ring formation reaction with dopamine cis‐diol functionality. Additionally, a monolithic stationary phase with zwitterion functionality has been used to prepare capillary column for the separation of dopamine. Experimental conditions including molarity, pH, and flow rate of the loading buffer together with a valve switching time have been optimized to provide the highest recovery for dopamine. Experimental setup has been used to determine dopamine in a urine. By using both calibration curve and standard addition method, the dopamine level was determined to be 1.19 and 1.28 mg/L, respectively. Further, we have used experimental design to optimize coupling of two extraction monolithic loops to separation capillary column with monolithic phase for a comprehensive monitoring of dopamine. After multivariate analysis, sample loading flow‐rate and a flow‐rate of flushing buffer were selected as the most significant variables. Optimized experimental setup was applied to continuously monitor dopamine degradation.     

多壁碳纳米管-Nafion化学修饰电极在高浓度抗坏血酸和尿酸体系中选择性测定多巴胺

多巴胺是人体内一种重要的神经传递物质 ,它参与许多生命过程[1] .因此 ,测定体内多巴胺的浓度十分重要 .多巴胺的电化学分析方法已有不少报道 [2 ,3 ] .然而 ,共存的抗坏血酸和尿酸的电化学性质与多巴胺相似 ,对多巴胺的测定会产生严重干扰 .因此建立一种选择性测定多巴胺的高灵敏度的分析方法就显得尤为重要 .碳纳米管是一种新型的纳米材料 [4 ] ,它的出现引起了广泛的研究兴趣 [5,6] .由于其性质稳定 ,不溶于水及一般的有机溶剂 ,因此限制了其在电分析方面的应用 .本文将多壁碳纳米管分散在 Nafion的无水乙醇中 ,得到了一种均匀的多壁碳…     

Determination of Exogenously Administered Dopamine in Infant Plasma Using Liquid Chromatography with Electrochemical Detection

Abstract

A simple, rapid liquid chromatography method is described for the measurement of exogenously administered dopamine in infant plasma, using electrochemical detection and 3,4 dihydroxybenzylamine hydrobromide as the internal standard (IS).

The mobile phase consisted of a monochloroacetate buffer (pH=3.0) with sodium octyl sulfate as the ion-pairing agent, and 2.5% acetonitrile. A biophase II^R reverse phase column was used, and the electrochemical detector was set at +650 mV versus Ag/AgCl. The retention times of IS and dopamine were 3.3 and 6.5 minutes, respectively. The recovery of dopamine following an alumina extraction procedure ranged from 75 to 80%. The inter- and intra-day coefficients of variation using this method were less than 10% and less than 5%, respectively. The major advantages of this method include use of a very small volume of plasma sample (20 μl) and ability to determine very wide ranges of plasma concentrations of dopamine following its administration intravenously. The method was used to measure the plasma concentrations of dopamine in two newborn infants to demonstrate its clinical application.     

Simple method for the simultaneous determination of noradrenaline, dopamine and serotonin by stepwise elution from a short column of weak cation-exchange resin

A simple method for the simultaneous determination of noradrenaline, dopamine and serotonin using a short column of Amberlite CG-50 is described. Noradrenaline and dopamine were eluted from the column with phosphate buffers containing 1.5 and 4.0% boric acid, respectively, and then serotonin was eluted with 1.0 N HCl. Catecholamines were determined by a modification of the ethylenediamine condensation method using potassium ferricyanide as oxidant and isobutanol for extraction of the fluorophores. Serotonin was measured by the acidic o-phthalaldehyde method. The method was applied to the simultaneous determination of noradrenaline, dopamine and serotonin in discrete regions of rat brain.     

A Highly Sensitive and Selective Multiwall Carbon Nanotubes/Nafion/Au Microarrays Electrode for Dopamine Determination

This work presents the fabrication of Nafion (Nf) or Nafion/Multiwalled Carbon Nanotubes (Nf/MWCNTs) modified gold microarray (Au‐µA) and macro‐(Au‐M)electrode biosensors. The surface morphologies of the above electrodes were examined using SEM. The catalytic properties of the above electrodes towards dopamine were tested using square wave voltammetric technique. The Nf/MWCNT/Au‐µA electrode exhibited a wide range (0.1–1000 nM) of linearity among the other electrodes. The LOD of Nf/MWCNT/Au‐µA electrode was 50 pM for dopamine in the presence of 5000 µM ascorbic acid. Therefore, the Nf/MWCNT/Au‐µA biosensor was applied for the determination of dopamine in human serum.     

Electrochemical Determination of Dopamine Using a Graphene–Screen-Printed Carbon Electrode with Magnetic Solid-Phase Microextraction

A magnetically separable Fe₃O₄@Diaion HP-2MG composite was prepared using the coprecipitation method and the resulting magnetic Fe₃O₄@Diaion HP-2MG composites were used for the separation and preconcentration of trace amounts of dopamine. For the detection stage, square wave voltammetry on a disposable graphene–screen-printed carbon electrode was successfully used for the determination of dopamine. The graphene–screen-printed carbon electrode exhibited excellent electroanalytical performance for dopamine. The linear concentration range was from 0.8 to 80?µM and a detection limit of 50?nM for dopamine was obtained. In combination with the magnetic solid-phase extraction method, the sensor response was linearly proportional to the concentration of dopamine in the range of 0.01–6.0?µM with a correlation coefficient of approximately 0.9992. The detection limit of the sensor was found to be 5.0?nM by square wave voltammetry. The combined methodology was successfully applied to determine dopamine in urine samples with good recoveries ranging from 95 to 98%.     

尿酸和叶酸存在下改性碳纳米管糊电极上多巴胺电催化氧化MohammadMazloum-Ardakani,MahboobeAbolhasani,Bibi-FatemehMirjalili,MohammadAliSheikh-Mohseni,AfsanehDehghani-Firouzabadi,AlirezaKhoshroo简

A chemically modified carbon paste electrode (CPE), consisting of 2,2''-[(1E)-(1,2-phenylenebis(azanylylidene)] bis(methanylylidene)]bis(benzene-1,4-diol) (PBD) and multiwalled carbon nanotubes (CNTs), was used to study the electrocatalytic oxidation of dopamine using cyclic voltammetry, chronoamperometry, and differential pulse voltammetry (DPV). First, the electrochemical behavior of the modified electrode was investigated in buffer solution. Then the diffusion coefficient, electrocatalytic rate constant, and electron-transfer coefficient for dopamine oxidation at the surface of the PBD-modified CNT paste electrode were determined using electrochemical approaches. It was found that under optimum conditions (pH = 7.0), the oxidation of dopamine at the surface of such an electrode occurred at about 200 mV, lower than that of an unmodified CPE. DPV of dopamine at the modified electrode exhibited two linear dynamic ranges, with a detection limit of 1.0 μmol/L. Finally, DPV was used successfully for the simultaneous determination of dopamine, uric acid, and folic acid at the modified electrode, and detection limits of 1.0, 1.2, and 2.7 μmol/L were obtained for dopamine, uric acid, and folic acid, respectively. This method was also used for the determination of dopamine in a pharmaceutical preparation using the standard addition method.     

Methylthiouracil‐modified Carbon Paste Electrode as a New Voltammetric Sensor Based on a 1,4‐Michael Addition Reaction for Detection of Dopamine

A sensitive dopamine sensor was constructed based on the modified carbon paste electrode with methylthiouracil as a nucleophile in the 1,4‐Michael addition reaction. An ECE mechanism was suggested for dopamine oxidation at the modified electrode. Design of experiments was used in the optimization of variables. Under the optimum conditions, calibration graph was linear in the range of 0.20–15.0 µM with a detection limit of 73 nM. The relative standard deviations (n=5) for 0.50 µM of dopamine was 3.83 %. The selectivity of the sensor was also studied. The developed sensor was applied for analysis of pharmaceutical and biological samples.     

Rhombic Polyaniline Microsheets Constituted of Nanoparticles:Synthesis and Application to the Detection of Dopamine

Rhombic polyaniline microsheets constituted of nanoparticles with the average diameter of 130 nm were synthesized and characterized by SEM, XRD and FTIR spectroscopy. A glassy carbon electrode modified with such rhombic polyaniline microsheets was fabricated and employed to detect dopamine via cyclic voltammetry, which displayed excellent electrochemical stability and sensitivity compared with the bare electrode. A linear relationship between the concentrations of dopamine and its oxidation peak currents was obtained. The proposed method was simple and economical in terms of the electrochemical method and apparatus.     

A sensitive determination of dopamine in the presence of ascorbic acid using a nafion-coated clinoptilolite-modified carbon paste electrode

A selective dopamine determination using a nafion-coated clinoptilolite-modified carbon paste electrode in the presence of ascorbic acid was studied. Both cyclic voltammetry (CV) and differential pulse anodic stripping voltammetry (DPASV) were used for measurements of dopamine. To improve the selectivity of the clinoptilolite-modified carbon paste electrode in presence of a high concentration of ascorbic acid, the electrode surface was coated with nafion membrane. Experimental parameters affecting the determination of dopamine, including the clinoptilolite ratio, nafion membrane thickness, preconcentration time, preconcentration solution pH, stripping solution pH and interferences are discussed. The developed sensor has a wide linear range, a low detection limit, and good stability and reproducibility. The sensor offers a good alternative to existing analytical methods for dopamine, permits a relatively short analysis time, and is simple, selective and inexpensive.     

A novel resonance Rayleigh scattering aptasensor for dopamine detection based on an Exonuclease III assisted signal amplification by G - quadruplex nanowires formation

A new method was constructed for detecting dopamine based on aptamer-specific recognition and resonance Rayleigh scattering (RRS) of G - quadruplex nanowires (G - wires). The dopamine aptamer was used to recognize the target of dopamine, and the Exonuclease III was applied to cleave the hairpin DNA, and the G - wire formation was induced in the presence of K⁺ and Mg²⁺. This phenomenon was confirmed by polyacrylamide gel electrophoresis. Thus, a quantitative relationship between the RRS intensity of the G - wires and the dopamine concentration was established. The experimental conditions were optimized, such as the concentration of Mg²⁺, reaction temperature, reaction time and the concentration of Exonuclease III in the reaction system, and the interference substances were investigated, such as uric acid, ascorbic acid and serotonin. Under the optimal conditions, there was a good linear relationship between the RRS and the logarithm of dopamine concentration in the range from 5.0 × 10^-11 M to 1.0 × 10^-8 M (r = 0.995), with a detection limit of 1.2 × 10^-11 M. The novel method for dopamine detection showed excellent selectivity and high sensitivity, and could be used to detect dopamine in mice brain tissues.     

Dopamine-imprinted polymers: template-monomer interactions, analysis of template removal and application to solid phase extraction

A dopamine-imprinted polymer (MIP) was prepared in aqueous methanol solution at 60(o)C by free-radical cross-linking polymerization of methacrylic acid in the presence of ethylene glycol dimethacrylate as the cross-linker and dopamine hydrochloride as the template molecule. Its ability to isolate dopamine was evaluated as the basis of a solid phase extraction procedure and compared with that of a non-imprinted polymer(NIP). The binding of dopamine was 84.1% and 29.1% for MIP and NIP, respectively.Various reported post-polymerization treatments to reduce template bleeding were examined. In our case the lowest bleeding was achieved after applying a combined procedure: continuous extraction in a Soxhlet apparatus (CE), followed by microwave-assisted extraction (ME) to a level of 0.061 microg/mL. A simplified model of the template-monomer complexes allowed rationalization of monomer choice based on the heats of complex formation at a PM3 level of theory.