Computer-aided designing of simple electron-optical systems for electron image tubes

We consider the possibility of designing time-analyzing electron-optical systems for electron image tubes with subpicosecond resolution, containing no spherical electrodes, fine-structure grids, or narrow slots (i.e., extremely simple systems with high spatial and temporal resolutions).     

New experimental technique of photoelectron holography applied to Bi trimers on Si(111)

The branching ratio, the photoemission intensity ratio of two spin-orbit-split components, has been applied for the first time as a means for obtaining a photoelectron holographic image. Angle-resolved photoemission from a monolayer of Bi adsorbed on Si(111) shows fine-structure oscillations in the branching ratio of the Bi 5d core level due to diffraction effects. These oscillations as a function of photon energy are recorded for a number of emission angles. Three-dimensional holographic inversion of the data yields an atomic image which shows that the Bi adatoms are arranged in a trimer structure.     

Optimal processing of noisy images in a photodetector with limited dynamic range

A study aimed at optimizing noisy image processing under conditions of strong additive noise has been performed. An algorithm of optimal signal processing was developed and a possibility of improving image quality due to the subtraction of excess additive noise (which limits the photodetector dynamic range) was substantiated. The possibility of technical implementation of noise subtraction due to forced recombination of charge carriers in the photodetector is experimentally confirmed. The proposed approach to design processing systems makes it possible to improve the quality of recorded images under noisy conditions without any changes in the photodetector design.     

大尺寸物光波面彩色数字全息高质量重建研究

为解决检测面尺寸较大时CCD难以得到高质量数字全息图的问题,本文利用负透镜设计光学系统让CCD接收来自物体的缩小虚像,以球面波为参考波,使用单色CCD近距离得到三种色光照射下的大尺寸彩色物体的数字全息图,然后采用可控放大率波面重建算法得到同一尺寸的数字全息重建像,合成彩色数字全息重建像.同时,使用两种消零级方法去除零级干扰,提高重建像质量,一种方法利用空间光调制器相移技术在参考光中加入一次任意相移,记录两幅数字全息图,消除重建零级像|另一种方法使用“无干扰全息图”消除重建零级像及共轭像.本文讨论结果可为大物体彩色数字全息及多波长数字全息检测应用提供有益的参考.     

电磁复合聚焦—偏转球面阴极透镜的相对论象差理论

本文应用变分原理研究了电磁复合聚焦-偏转球面阴极透镜的相对论象差理论。在考虑阴极面逸出电子具有一定的初能量和初角度分布,物场和象场弯曲以及阴极面上磁场和横向电场不为零的情况下,导出了任意理想象面上的一级近轴横向象差和包括色球差在内的全部三级几何横向象差,以及各种特殊类型象差系数的明显表达式。本文导出的象差公式不仅普遍适用于宽束和细束阴极透镜,而且普遍适用于相对论或非相对论,阴极和屏为球面或平面时的各种情况。本文以复数描写轨迹,用矩阵表示象差,形式简洁,适合于计算机计算。 关键词：     

Image of rays that have passed through a stationary phase-distorting medium

Images obtained through stationary phase-distorting media are investigated in this paper. It is shown that the quality of the recorded images depends on the conditions of light beam limitation. Qualitative results and quantitative dependences of the contrast of the image being recorded through a phase-distorting medium on the magnitude of the aperture orifice are presented. A method is proposed for improving the image quality of objects being recorded through smooth phase-distorting stationary media, which is efficient for both coherent and noncoherent exposure.     

大尺寸物光波面彩色数字全息高质量重建研究

为解决检测面尺寸较大时CCD难以得到高质量数字全息图的问题,本文利用负透镜设计光学系统让CCD接收来自物体的缩小虚像,以球面波为参考波,使用单色CCD近距离得到三种色光照射下的大尺寸彩色物体的数字全息图,然后采用可控放大率波面重建算法得到同一尺寸的数字全息重建像,合成彩色数字全息重建像.同时,使用两种消零级方法去除零级...     

Application of the SCVT Orientation Grid to the Simulation of CW EPR Powder Spectra

The orientation grid obtained using the spherical centroidal Voronoi tessellation (SCVT) method is assessed for the simulation of continuous-wave electron paramagnetic resonance (CW EPR) powder spectra. The SCVT spherical code presents less distorted Voronoi cells associated to the points of the grid compared to the regular Igloo, SOPHE and EasySpin grids and similar distortions of the cells to the irregular Repulsion grid. The degree of distribution of the SCVT cells’ areas is smaller than for SOPHE, but higher than for the Igloo and Repulsion grids. All compared spherical codes have nearly the same electrostatic potential energy. Simulated CW EPR powder spectra for rhombic systems of spin S = 1/2 are similar when using the energy minimization SCVT and Repulsion spherical codes and show less intense ripples than the spectra calculated with the SOPHE and Igloo grids, but more intense than those obtained using the EasySpin grid. The classical projection method and a new modified form involving the spectral intensities at the orientations of the grid have been tested for the attenuation of the simulation noise, for grids of relatively reduced size.     

宽束和细束电磁复合聚焦球面阴极透镜的象差理论

本文研究了对宽束和细束阴极透镜普遍适用的电磁复合聚焦球面阴极透镜的象差理论。在考虑物场和象场弯曲以及阴极面上磁场和横向电场不为零的情况下,导出了任意理想象面上的一级近轴横向象差和包括色象差在内的全部三级横向象差矩阵公式。所得的结果较为完整、普遍。本文详细讨论了宽束和细束阴极透镜的关系,并用轨迹法和变分法严格证明了:当考虑阴极面逸出电子具有一定的初能量和初角度分布,并采用准规范化电位表示的近轴轨迹方程来讨论系统的理想成象时,宽束和细束两类阴极透镜从象差理论以至导出的三级横向象差、象差系数表示式都可以统一起来。本文采用矢量描写轨迹,运用矩阵表示象差,形式简洁,象差系数积分收敛,适合于计算机计算。 关键词：     

Erratum

The rotation collimator is recommended as a camara for radiology and nuclear medicine. The advantages over Fresnel skiagraphy are that the collimator uses a high quantum efficiency, single-channel detector and automatic numerical processing to produce an image in almost real time on a cathode ray tube without needing any cumbersome photographic steps. The use of a halftone screen permits the collimator to perceive low spatial frequencies. An algorithm to facilitate the numerical processing (Fourier transformation) of the data on a polar coordinate grid is given.     

AGRIN混合光学系统设计

轴向梯度折射率(AGRIN)透镜是一种有望用来替代非球面,并在成像时优于非球面的一种方法.综述了AGRIN材料的发展历史,现状及其在镜头设计中的应用,简述AGRIN材料在光学设计中的应用和它与非球面相比的优点,探讨AGRIN材料的制造问题.发现使用AGRIN材料,不仅会使光学系统成像质量有所提高,而且在制造和测试上都有很大的优势.最后以设计一个焦距125 mm、F/4、视场25°,适用于DALSA全帧28M像素大幅面CCD的航测数字相机镜头为例,把原来的11片全球面镜头,利用2片AGRIN透镜,在保持像质不变的情况下减少到8片,而且像质均匀性和镜头结构更加合理.     

Can MBPT and QED be merged in a systematic way?

The possiblities of merging QED with the standard many-body perturbation theory (MBPT) for atomic systems in a rigorous and systematic way are analysed. Time-dependent MBPT, based on the time-evolution operator, a technique well developed particularly in nuclear theory, is used and somewhat reformulated to be consistent with the covariant QED formalism. An effective QED Hamiltonian, free from singularities, is constructed. The procedure can be applied to degenerate and quasi-degenerate systems (extended model space), which is not possible with the standard QED technique based upon the S-matrix formulation. To include in the model space closely lying energy levels, such as fine-structure levels, can have a dramatic effect on the convergence rate. The electron-electron interaction is investigated in detail, and it is shown that it can be separated into irreducible multi-photon interactions, which in principle can be iterated as in standard MBPT. Singularities do not appear, and a simple procedure for evaluating residual finite contributions is described. Comparison is made with the closely related Green's function technique. The procedure is presently being tested on the fine-structure levels of He-like ions.     

平像场无遮掩大视场两镜系统光学设计

从像差理论出发,提出一种平像场无遮掩两反射镜系统的设计方法,能够同时消除球差、慧差、像散和场曲四种初级像差.描述了该方法的设计过程和步骤,并总结了这种系统的结构特点. 利用该方法设计出了视场角分别为6°×6°和20°×1°两个光学系统,其成像质量均达到了衍射限.该系统结构简单,易于装调,在航天遥感领域有很大的应用前景.     

预放大数字全息显微系统的特点

为了提高预放大数字全息显微系统的成像质量,采用理论分析与实验验证相结合的方法,分别对采用平面及球面参考光记录的预放大数字全息显微系统进行了研究和比较。结果表明:在通常的实验条件下,系统的横向分辨力主要取决于显微物镜的成像分辨力;记录距离较小时,两种系统的横向分辨力均随着记录距离的增大略有降低;但当记录距离较大时,球面参考光预放大数字全息系统的横向分辨力降低得更为明显,即平面参考光预放大数字全息显微系统较为优越;在记录距离为0的情况下,即像面数字全息成像情况下,两种系统的再现像均具有最高的分辨力,在利用普通工业用传感器条件下,横向分辨力远超过了2.19 m,且像质较好。因此,尽可能减小全息图的记录距离,或者采用像面数字全息系统,可以有效提高数字全息系统的成像分辨力。     

Multi-frequency AOM for multi-beam laser scanning exposure system

Digital printing systems recorded on films or computer to plates (CTPs) have been required to improve their productivity and image quality. Under the circumstance, a printing technology of the multi-beam laser scanning for the drum capstan system, which is almost the same as optics configuration as the flat bed system, was developed using a newly developed multi-frequency acousto–optic modulator (AOM) as a key device instead of ultra-fast scanning devices toward a main scan direction. The multi-frequency AOM was developed with phased array-type transducers, achieving a wider bandwidth of over 160 MHz. The design consisted of a simultaneous three beams generation with interlace scan to avoid the beat effect by adjacent Doppler-shifted beams, which consequently attained the fastest recording speed of 5.0 mm/s compared with 2.0–3.0 mm/s of existing systems in those days. Furthermore, a couple of critical parameters of the multi-frequency AOM are studied, for example, a treatment of third-order intermodulation and also beat effect in connection with photosensitive media. As a result, the necessity of interlaces scanning to obtain good image quality without beat effect and also to allow a lower laser power to apply is proposed.     

Gridded Cross Field Tube

A triode crossed field tube has been operated as a high voltage on-off switch tube. A third, partially transparent (grid) electrode is interposed between the anode and cathode and electrically tied to the cathode by a grid leak resistor. High voltage is first applied to the anode and cathode; the magnetic field is then raised to the conduction level (~ 0.01 Tesla). Ignition does not occur because the magnetic field is too low in the grid-anode gap and the electric field is zero in the cathode-grid gap. Pulsing the grid positive relative to the cathode (~ 1 kV) then results in breakdown of the cathode-grid gap; plasma comunication between the two gaps then fully ignites the tube and closes the main power circuit. Grid ignition has been achieved at 50 kV as well as grid ignition followed by current interruption against 10 kV. These levels were limited by the use of a modified, laboratory tube and not by the physics of the technique.     

Study of the electric capacitance spectra on symmetric quantum-dot pattern

We have calculated the ground-state energy of the symmetric quantum-dot pattern by the ab initio calculation method, i.e. unrestricted Hartree-Fock-Roothaan (UHFR) method based on the Gaussian basis, and studied their electric capacitance spectra, assuming each quantum dot of quantum-dot pattern to be confined in a three-dimensional spherical potential well of finite depth. For the systems in question, our results show that our method and theoretical model not only give the electric capacitance peaks similar to s-shell and p-shell atom-like quantum dot, but also show some new fine-structure of electric capacitance in the symmetric quantum-dot pattern system. This method might be a feasible tool to study few-electron problems on the symmetric quantum-dot pattern system.     

制冷型红外光学系统温栏杂散辐射分析及消除方法

在致冷型红外光学系统中加入温栏会引入杂散辐射。杂散辐射包括温栏自身的辐射及对外部热光的反射。这两种辐射进入探测器后,会降低系统的信噪比和动态范围,影响成像质量。基于辐射及传热理论,提出温栏杂散辐射所引起噪声等效温差的计算模型,并研究了消除温栏杂散辐射的方法。用LIGHT TOOLS进行了光线追迹,对比分析了传统平面环状温栏和球面反射镜型温栏的杂散辐射,验证了理论推导的正确性和消除方法的可行性。结果表明,采用半径为30.3 mm的高反射率球型温栏代替原设计中的粗糙平面型温栏,控制其曲率半径和位置,可使由温栏引入的杂散辐射降低99%以上。     

Combining spin-adapted open-shell TD-DFT with spin–orbit coupling

The recently proposed spin-adapted time-dependent density functional theory (S-TD-DFT) is extended to the relativistic domain for fine-structure splittings of excited states of open-shell systems. Scalar-relativistic effects are treated to infinite order via the spin-free (sf) part of the exact two-component (X2C) Hamiltonian, whereas the spin–orbit couplings (SOC) between the scalar-excited states are treated perturbatively via an effective one-electron spin–orbit operator derived from the same X2C Hamiltonian. The calculated results for prototypical open-shell systems containing heavy elements reveal that the composite approach sf-X2C-S-TD-DFT-SOC is very promising. The fine-structure splitting of a spatially degenerate ground state can also be described properly by taking a non-degenerate excited state as the reference.     

Beamforming synthesis of binaural responses from computer simulations of acoustic spaces

Auditorium designs can be evaluated prior to construction by numerical modeling of the design. High-accuracy numerical modeling produces the sound pressure on a rectangular grid, and subjective assessment of the design requires auralization of the sampled sound field at a desired listener position. This paper investigates the production of binaural outputs from the sound pressure at a selected number of grid points by using a least squares beam forming approach. Low-frequency axisymmetric emulations are derived by assuming a solid sphere model of the head, and a spherical array of 640 microphones is used to emulate ten measured head-related transfer function (HRTF) data sets from the CIPIC database for half the audio bandwidth. The spherical array can produce high-accuracy band-limited emulation of any human subject's measured HRTFs for a fixed listener position by using individual sets of beam forming impulse responses.