Preparation and properties of new co-crystals of ibandronate with gluco- or galactopyranoside derivatives

Mixtures of ibandronate monosodium salt with eleven gluco- and/or galacto-pyranoside derivatives as counterions were designed to prepare co-crystals with improved intestinal absorption. In general, gastrointestinal absorption of bisphosphonates after oral administration is approximately 1%. Co-crystals were generated by means of thermodynamically and/or kinetically controlled crystallization processes. Seventy-seven prepared samples were analyzed by means of FT-NIR, FT-Raman spectrometry and solid state NMR spectroscopy. New entities of ibandronate monosodium salt with phenyl-β-D-galactopyranoside were found and characterized. The absorption of these potential new co-crystals was investigated by means of PAMPA experiments. In the present study the relationships between the chemical structures of the studied compounds required for co-crystal generation are discussed.     

Preparation and characterization of two crystalline forms of 4-amino-5-chloro-2-methoxy-N-[(2S,4S)-1-ethyl-2-hydroxymethyl-4-pyrroli dinyl]benzamide (TKS159)

For 4-amino-5-chloro-2-methoxy-N-[(2S,4S)-1-ethyl-2-hydroxymethyl-4-pyrrolid inyl]benzamide (TKS159), two polymorphs, forms alpha and beta, were prepared and characterized by means of X-ray powder diffractometry, thermal analysis, infrared spectroscopy and 13C-NMR spectroscopy, both in the solution and solid phases. The X-ray powder diffraction analysis gave different patterns for forms alpha and beta. In the thermogravimetry and differential thermal analysis profiles, form beta exhibited characteristic endo- and exothermic peaks at 112.7 degrees C and 116.2 degrees C, respectively, due to the partial melting-induced phase transition to form alpha without accompanying weight loss, and these were followed by an additional endothermic peak at 138.2 degrees C due to fusion. For form alpha, only an endothermic peak at 137.8 degrees C due to fusion was observed. The IR spectroscopic analyses of forms alpha and beta gave different absorption bands assigned to N-H and O-H stretching, N-H bending, and C=O stretching vibrations. From the data obtained by thermal analysis, form alpha was shown to be thermodynamically more stable than form beta.     

Probing the interaction of amorphous solid water on a hydrophobic surface: dewetting and crystallization kinetics of ASW on carbon tetrachloride

Desorption of carbon tetrachloride from beneath an amorphous solid water (ASW) overlayer is explored utilizing a combination of temperature programmed desorption and infrared spectroscopy. Otherwise inaccessible information about the dewetting and crystallization of ASW is revealed by monitoring desorption of the CCl(4) underlayer. The desorption maximum of CCl(4) on graphene occurs at ~140 K. When ASW wets the CCl(4) no desorption below 140 K is observed. However, the mobility of the water molecules increases with ASW deposition temperature, leading to a thermodynamically driven dewetting of water from the hydrophobic CCl(4) surface. This dewetting exposes some CCl(4) to the ambient environment, allowing unhindered desorption of CCl(4) below 140 K. When ASW completely covers the underlayer, desorption of CCl(4) is delayed until crystallization induced cracking of the ASW overlayer opens an escape path to the surface. The subsequent rapid episodic release of CCl(4) is termed a "molecular volcano". Reflection absorption infrared spectroscopy (RAIRS) measurements indicate that the onset and duration of the molecular volcano is directly controlled by the ASW crystallization kinetics.     

聚合物固体电解质中的离子状态与导电机理的研究

制备得到了一种新颖的聚氨酯和丙烯酸酯复合梳形交联聚合物 (Combcross linkedpolymer) ,并以此聚合物为基体加入不同含量的高氯酸锂盐制得一系列聚合物固体电解质 ,其室温电导率可以达到 3 4× 10 - 5S·cm- 1 .通过Raman、DSC、SEM及电性能等研究了电解质中的盐浓度与离子存在状态及离子电导率之间的关系 .结果显示随着盐浓度的增加 ,聚合物固体电解质中离子对的比例和电导率都迅速增加 ,说明离子对 (由多个醚氧原子、阴离子和阳离子组成 )对体系导电起着积极的作用 .     

Warfarin Sodium Stability in Oral Formulations

Warfarin sodium is a low-dose pharmaceutical blood thinner that exists in two forms: the clathrate form and the amorphous form. In commercially available warfarin sodium oral suspension, the active pharmaceutical ingredient (API) is added in the amorphous state. This study investigates the apparent instability of the commercially available warfarin liquid oral formulation using Raman and IR spectroscopy, X-ray diffraction, differential scanning calorimetry, UV spectroscopy, and optical microscopy. Warfarin, not its sodium salt, was identified as the undissolved solid existing in the suspension. This was found to be due to the dissociation of sodium salt and the protonation of the warfarin ion in the liquid phase, which triggered the crystallization of the sparingly soluble unsalted form. The coexistence of protonated and unprotonated warfarin ions in the supernatant, as detected by Raman and UV spectroscopy, confirmed this assumption. Study of the dissolution of warfarin sodium amorphous salt and crystalline sodium clathrate in the placebo and pure water verified the results. The effect of pH and temperature on warfarin precipitation was also explored.     

Design and characterization of a new drug nanocarrier made from solid-liquid lipid mixtures

The classical lipid nanoparticles that have been proposed for drug delivery are composed of solid lipids. Due to their composition, these nanoparticles have a limited drug loading and controlled release capacity. The present work was aimed at modifying the inner structure of nanoparticles made of tripalmitin, lecithin, and poly(ethylene glycol) (PEG)-stearate with the incorporation of a liquid lipid (Miglyol 812 oil). The composition and structural organization of the components of the resulting nanoparticles were characterized by (1)H NMR spectroscopy. Any possible changes in the crystalline domains of individual components when in the form of the nanoparticles were investigated by differential scanning calorimetry (DSC) and X-ray diffraction spectroscopy. The results of the NMR analysis indicated a significant incorporation of the oil to the solid nanoparticle matrix. Furthermore, the relaxation time constants as well as the peak width of the (1)H NMR spectrum of the nanoparticles suggest the presence of the oil in the form of phase-separated liquid nanoreservoirs within the nanoparticles. This conclusion was supported by the observation of restricted diffusion dynamics for the oil molecules. Interestingly, the incorporation of the oil did not interfere with the crystallization of the solid lipids (tripalmitin and PEG-stearate). In conclusion, a new nanostructure consisting of solid lipids and oily nanodomains was developed. This structural modification of the solid lipid nanoparticles may have an effect on their encapsulation capacity and controlled release properties.     

Synthesis and characterization of new azo-linked Schiff bases and their cobalt(II), copper(II) and nickel(II) complexes

Azo compounds were prepared by the reaction between benzenediazonium chloride and 4-amino-5-hydroxy-2,7-naphthalenedisulfonic acid monosodium salt under alkaline conditions. Two new azo-linked Schiff base ligands, 4-(3-methoxysalicylidene)-5-hydroxy-6-(2-hydroxyphenylazo)-2,7-naphthalene disulfonic acid disodium salt (H₂L) and 4-(3-methoxysalicylidene)-5-hydroxy-6-(2-hydroxy-4-cholorophenylazo)-2,7-naphthalenedisulfonic acid disodium salt (H₂L¹), have been synthesized. Also, the new Cu^II, Ni^II and Co^II complexes of the azo-linked Schiff base ligands were prepared and characterized by infrared spectra, UV–Vis, ¹H- and ¹³C-n.m.r., attached proton test (APT) and distortionless enhancement by polarization transfer (DEPT) and atomic absorption spectroscopy, mass spectrocopy, elemental analyses, thermogravimetric analysis, conductivity and magnetic measurements. It was determined that the synthesized ligands were comprised of six-membered rings due to intramolecular hydrogen bonding. The results suggested that condensation of the azo-derivative compounds and o-vanillin in a 1:1 molar ratio produces mononuclear Schiff base ligands with an ONO donor set. Preliminary histological studies were made. Magnetic moment studies showed that all complexes have a tetrahedral configuration.     

Effects of aging on crystallization, dissolution and absorption characteristics of amorphous tolbutamide-2-hydroxypropyl-beta-cyclodextrin complex

The effects of storage on the crystallization, dissolution and absorption of tolbutamide from amorphous tolbutamide-2-hydroxypropyl-beta-cyclodextrin (HP-beta-CyD) complex were investigated, in comparison with those of polyvinylpyrrolidone (PVP) solid dispersion. The amorphous solid complex of tolbutamide with HP-beta-CyD and the solid dispersion of tolbutamide with PVP were prepared by a spray-drying method. During storage, a stable form of tolbutamide (form I) was crystallized from the amorphous PVP dispersion, whereas a metastable form of tolbutamide (form II) was crystallized from the HP-beta-CyD complex. The dissolution rate of tolbutamide from both HP-beta-CyD complex and PVP dispersion was significantly faster than that of tolbutamide alone. However, the dissolution rate from the PVP dispersion markedly decreased with storage, because of the formation of slow dissolving form I crystals. On the other hand, the dissolution rate from the HP-beta-CyD complex was only slightly decreased due to the formation of fast dissolving formII crystals. These in vitro dissolution characteristics were clearly reflected in the in vivo absorption of tolbutamide and the glucose plasma level after oral administration in dogs. The results suggested that HP-beta-CyD is useful not only for converting crystalline tolbutamide to an amorphous substance, but also for maintaining the fast dissolution rate of the drug over a long period. Furthermore, the crystallization of drugs from CyD complexes, with storage, seemed to be different from that involving polymer excipients such as PVP.     

PtPd-nanoparticles supported by new carbon materials

Nanocomposites based on PtPd nanoparticles with chemical ordering like disordered solid solution on surface of multilayer graphene have been prepared through thermal shock of mechanically obtained mixture of double complex salt [Pd(NH₃)₄][PtCl₆] and different carbon materials–exfoliated graphite, graphite oxide and graphite fluoride. An effect of original carbon precursors on formation of PtPd bimetallic nanoparticles was studied using X-ray absorption spectroscopy (XAFS), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). It was shown that the distribution of bimetallic nanoparticles over the multilayer graphene surface as well as the particles size distribution is controlled by the graphene precursors. For all nanocomposites, the surface of the nanoparticles was found to be Pd-enriched. In case when the thermal exfoliated graphite and graphite oxide were used as the graphene precursors a thin graphitized layer covered the nanoparticles surface. Such a graphitized layer was not observed in the nanocomposite, which used the fluorinated graphite as the precursor.     

Synthesis, characterization, and self-assembly of pencil-shaped CoO nanorods

We synthesized uniformly sized, pencil-shaped CoO nanorods by the thermal decomposition of a cobalt-oleate complex, which was prepared from the reaction of cobalt chloride and sodium oleate. The diameters and lengths of the CoO nanorods were easily controlled by varying the experimental conditions, such as the heating rate and the amount of Co-oleate complex. The X-ray diffraction pattern revealed that the CoO nanorods have an extraordinary wurtzite ZnO crystal structure. These uniformly sized nanorods self-assembled to form both horizontal parallel arrangements and perpendicular hexagonal honeycomb superlattice structures. Reduction of the nanorods by heating under a hydrogen atmosphere generated either hcp Co or Co(2)C nanorods. Characterization of the CoO nanorods using X-ray absorption spectroscopy, X-ray magnetic circular dichroism spectroscopy, and magnetic measurements showed that they contain a small fraction of ferromagnetic Co impurities.     

Preparation, characterization and optical properties of lanthanum-(nanometer MCM-41) composite material

Nanometer MCM-41 molecular sieve was prepared under a base condition by using cetyltrimethylammonium bromide as template and tetraethyl orthosilicate as silica source by means of hydrothermal method. Lanthanum(III) was incorporated into the nanometer MCM-41 by a liquid phase grafting method. The prepared nanocomposite materials were characterized by means of powder X-ray diffraction, spectrophotometric anaylsis, Fourier transform infrared spectroscopy, low temperature nitrogen adsorption-desorption technique, solid diffuse reflectance absorption spectra and luminescence. The powder X-ray diffraction studies show that the nanometer MCM-41 molecular sieve is successfully prepared. The highly ordered mesoporous two-dimensional hexagonal channel structure and framework of the support MCM-41 is retained intact in the prepared composite material La-(nanometer MCM-41). The spectrophotometric anaylsis indicates that lanthanum exists in the prepared nanocomposite materials. The Fourier transform infrared spectra indicate that the framework of the MCM-41 molecular sieve still remains in the prepared nanocomposite materials and some framework vibration peaks show blue shifts relative to those of the MCM-41 molecular sieve. The low temperature nitrogen adsorption-desorption indicates that the guest locates in the channel of the molecular sieve. Compared with bulk lanthanum oxide, the guest in the channel of the molecular sieve has smaller particle size and shows a significant blue shift of optical absorption band in solid diffuse reflectance absorption spectra. The observed blue shift in the solid state diffuse reflectance absorption spectra of the lanthanum-(nanometer MCM-41) sample show the obvious stereoscopic confinement effect of the channel of the host on the guest, which further indicates the successful encapsulation of the guest in the host. The La-(nanometer MCM-41) sample shows luminescence.     

Solid-state forms of prilocaine hydrochloride

Two polymorphic forms, a dioxane solvate and the amorphous form of the local anaesthetic drug prilocaine hydrochloride (N-(2-methylphenyl)-2-propylamino monohydrochloride, PRCHC) were characterized by thermal analysis (hot stage microscopy, differential scanning calorimetry, thermogravimetry), vibrational spectroscopy (FTIR, FT-Raman-spectroscopy), powder X-ray diffractometry and water vapor sorption analysis. The formation and thermodynamic stability of the different solid phases is described and presented in a flow chart and an energy temperature diagram, respectively. Mod. I° (m.p. 169°C) is the thermodynamically stable form at room temperature and present in commercial products. This form crystallizes from all tested solvents except 1,4-dioxane which gives a solvate with half a mole of 1,4-dioxane per mole PRCHC. Mod. II occurs only on desolvation of the dioxane solvate and shows a lower melting point (165.5°C) than mod. I° and a lower heat of fusion. Thus, according to the heat of fusion rule, mod. II is the thermodynamically less stable form in the entire temperature range (monotropism) but kinetically stable for at least a year. Freeze-drying of an aqueous solution leads to the amorphous form. On heating and in moist air amorphous PRCHC exclusively crystallizes to the stable mod. I°. PRCHC exemplifies that certain metastable polymorphic forms are only accessible via a specific solvate, but not via any other crystallization path. Since no crystallization from 1,4-dioxane was performed in earlier solid-state studies of this compound, PRCHC was to this date rated as monomorphic. This revised version was published online in July 2006 with corrections to the Cover Date.     

Polymorphism in crystalline cinchomeronic acid

The structural relationship between the two crystal forms of cinchomeronic acid (CA 3,4-dicarboxypyridine) has been investigated by single crystal X-ray diffraction, IR and Raman spectroscopy and solid state NMR spectroscopy, showing that the two polymorphs form a monotropic system, with the orthorhombic form I being the thermodynamically stable form, while the monoclinic form II is unstable. In both forms CA crystallizes as a zwitterion and decomposes before melting. The crystal structure and spectroscopic analysis indicate that the difference in stability can be ascribed to the strength of the hydrogen-bonding patterns established by the protonated N-atom and the carboxylic/carboxylate O-atoms.     

纳米富铝β沸石的合成与表征

以低硅铝比焙烧后的硅铝胶固体为初始原料,在含F-近中性与低含水量体系下晶化合成出相对高结晶度的纳米富铝β沸石。实验考察了合成条件、硅铝胶焙烧对晶化产物的影响和晶化过程中Al配位状况变化,并采用XRD、XRF、SEM/TEM2、7AlMAS NMR物化方法对晶化产物进行表征。结果表明,含F-离子、H2O/SiO2摩尔比为2.4～6.0以及高温焙烧硅铝胶有利于合成高结晶度的纳米富铝β沸石;硅铝胶固体焙烧后能产生易于转化为β沸石晶核的Al四配位结构,而部分六配位Al在晶化过程中缓慢溶入β沸石晶核中而最终生成纳米富铝β沸石。     

Chiral supramolecular assemblies of a squaraine dye in solution and thin films: concentration-, temperature-, and solvent-induced chirality inversion

We prepared novel cholesterol-appended squaraine dye 1 and model squaraine dye 2 and investigated their aggregation behavior in solution and thin films using photophysical, chiroptical, and microscopic techniques. Investigations on the dependence of aggregation on solvent composition (good/poor, CHCl3/CH3CN) demonstrated that squaraine dye 1 forms two novel H-type chiral supramolecular assemblies with opposite chirality at different good/poor solvent compositions. Model compound 2 formed J-type achiral assemblies under similar conditions. The supramolecular assembly of 1 observed at lower fractions of the poor solvent could be assigned to the thermodynamically stable form, while a kinetically controlled assembly is formed at higher fractions of the poor solvent. This assignment is evidenced by temperature- and concentration-dependent experiments. With increasing temperature, the chirality of the kinetically controlled aggregate was lost and, on cooling, the aggregate with the opposite chirality was formed. On further heating and cooling the aggregates thus formed resulted in no significant changes in chirality, that is they are thermodynamically stable. Similarly, at lower concentrations, the thermodynamically stable form exists, but at higher concentration aggregation was found to proceed with kinetic control. Based on these observations it can be assumed that formation of the kinetically controlled assembly might be largely dependent on the presence of the nonpolar cholesterol moiety as well as the amount of poor solvent present. However, under solvent-free conditions, structurally different aggregates were observed when drop cast from solutions containing monomer, whereas a left-handed CD signal corresponding to the thermodynamically controlled assemblies was observed from pre-aggregated solutions.     

Synthesis and characterization of single‐wall‐carbon‐nanotube‐doped emeraldine salt and base polyaniline nanocomposites

Nanocomposites of polyaniline (PANI) and single‐wall carbon nanotubes (SWNTs) were prepared and characterized via resonance Raman and electronic absorption spectroscopy (ultraviolet–visible/near‐infrared). The chemical synthesis of PANI was performed in the presence of SWNTs in concentrations ranging from 10 to 50 wt % (SWNT/PANI). The obtained materials were hydrophilic, homogeneous composite compounds. The chemical interaction between PANI (in the conducting emeraldine salt form and in the insulating emeraldine base form) and metallic and semiconducting nanotubes was investigated. The emeraldine salt form of the polymer was significantly stabilized in the composite in comparison with plain PANI. A selective electronic interaction process between PANI and metallic SWNTs was found. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 815–822, 2005     

Inclusion complex of 3,9-bis(N,N-dimethylcarbamoyloxy)-5H-benzofuro[3,2-c]quinoline-6-one (KCA-098) with heptakis(2,6-di-O-methyl)-beta-cyclodextrin: interaction and dissolution properties

Interactions of KCA-098 with heptakis(2,6-di-O-methyl)-beta-cyclodextrin (DM-beta-CyD) in solution and in the solid state were studied by the solubility method, UV and fluorescence spectroscopy, powder X-ray diffractometry, and thermal analysis. The KCA-098/DM-beta-CyD system showed an A(L) type solubility diagram with stability constants of 5870 and 2220 M(-1) in aqueous and 10% methanol solutions, respectively. Following the addition of DM-beta-CyD, the maximum UV wavelength of KCA-098 was shifted to a longer wavelength and the fluorescence intensity was decreased. A similar spectral change was observed when KCA-098 was dissolved in less polar solvents, especially in proton-acceptor solvents, such as acetone and dimethylsulfoxide, suggesting that KCA-098 interacts with DM-beta-CyD through not only a hydrophobic interaction but also hydrogen bonding. The solid complex of KCA-098 with DM-beta-CyD in a molar ratio of 1:1 was prepared by the kneading method and the solvent evaporation method, using organic solvents. Powder X-ray diffractometric and differential scanning calorimetric studies indicated that KCA-098 was dispersed as microparticles on the DM-beta-CyD complex in the solid state prepared by the solvent evaporation method although it dispersed as crystals in the sample prepared by the kneading method. The dissolution of KCA-098 from the solid complex prepared by the former method was markedly faster than that prepared by the latter method, although it slowed down with the passage of time. The reduced dissolution of KCA-098 was explained by crystallization to the hydrate form in the medium. These data indicate that poorly water-soluble KCA-098 interacts with DM-beta-CyD in water and in the solid state and that a fast-dissolving form of KCA-098 can be obtained by evaporating with DM-beta-CyD using organic solvents.     

Formation and characterization of the (eta2-N2)Sc(H)OH and (eta1-NN)xSc(H)OH (x = 1, 2) complexes in solid argon

Hydrido scandium hydroxide dinitrogen complexes, (eta2-N2)Sc(H)OH and (eta1-NN)xSc(H)OH (x = 1, 2), have been prepared by the reactions of laser-ablated scandium atoms with H2O/N2 mixtures in solid argon. The end-on bonded (eta1-NN)xSc(H)OH (x = 1, 2) complexes were formed spontaneously on annealing, whereas the side-bonded (eta2-N2)Sc(H)OH complex was generated on broad-band irradiation. These complexes were characterized by infrared absorption spectroscopy as well as density functional theoretical calculations.     

Synthesis of poly(glycolic acid‐alt‐12‐aminododecanoic acid): The thermal polymerization kinetics of sodium N‐chloroacetyl‐12‐aminododecanoate

A new regular poly(ester amide) consisting of glycolic acid and 12‐aminododecanoic acid was synthesized by a thermal polycondensation method involving the formation of a metal halide salt. Polymerization could start in liquefied or solid phases, depending on the reaction temperature. The polymerization kinetics were investigated by isothermal and nonisothermal isoconversional methods. The reaction model was selected with both Coats–Redfern and isokinetic relationships. The activation energy was higher when the reaction took place mainly in the solid state. A compensation effect was found between the frequency factor and the activation energy. The thermal properties of the new polymer were studied as well as the isothermal crystallization from the melt state. Melt‐grown spherulites were studied by means of polarizing optical microscopy. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1199–1213, 2006     

Ionothermal synthesis process for aluminophosphate molecular sieves in the mixed water/ionic liquid system

The synthesis process of aluminophosphate AlPO(4)-11 molecular sieve in the mixed water/1-butyl- 3-methylimidazolium bromide ([bmim]Br) ionic liquid was investigated by XRD, multinuclear solid-state NMR, scanning electron microscopy (SEM) and X-ray energy dispersive spectroscopy (EDS). It was observed that a tablet phase, named SIZ-2, was formed at the early stage of crystallization. During crystallization metastable SIZ-2 with an incompletely condensed framework phosphorus disappeared gradually, and the phosphorous species became fully condensed through hydroxyl reaction with tetrahedral aluminum to form thermodynamically stable AlPO(4)-11 in the final product. It was found that [bmim]Br, acting as the structure-directing agent, was occluded into the AlPO(4)-11 channel.