(Liquid + liquid) equilibrium of (imidazolium ionic liquids + organic salts) aqueous two-phase systems at T = 298.15 K and the influence of salts and ionic liquids on the phase separation

(Liquid + liquid) equilibrium for the {1-ethyl-3-methylimidazolium tetrafluoroborate ([C₂mim]BF₄)/1-propyl-3-methylimidazolium tetrafluoroborate ([C₃mim]BF₄) + organic salt + H₂O} aqueous two-phase systems (ATPSs) have been experimentally ascertained at T = 298.15 K. Three empirical equations were used to correlate the binodal data. On the basis of the empirical equation of the binodal curve with the highest accuracy and lever rule, the (liquid + liquid) equilibrium data were calculated by MATLAB. The reliability of the tie line compositions was proved by the empirical correlation equations given by the Othmer–Tobias and Bancroft equations. The effective excluded volume (EEV) values obtained from the binodal model for these systems were determined. The EEV and the binodal curves plotted in molality both indicate that the salting-out abilities of the four salts follow the order: Na₃C₆H₅O₇ > (NH₄)₃C₆H₅O₇ > Na₂C₄H₄O₄ ≈ Na₂C₄H₄O₆, while the phase-separation abilities of the investigated ILs are in the order of [C₃mim]BF₄ > [C₂mim]BF₄. In the systems investigated, the effect of salts on the phase-forming capability was also evaluated in the shape of the salting-out coefficient obtained from fitting the tie-line data to a Setschenow-type equation. The phase-forming ability increases with the increase of salting-out coefficient.     

Relative hydrophobicity of equilibrium phases in biphasic systems (ionic liquid + water)

Partition coefficients for a series of dinitrophenylated (DNP) amino acids in biphasic systems composed of hydrophobic ionic liquids and water were experimentally determined. The ionic liquids used were three 1-alkyl-3-methylimidazolium tetrafluoroborates, [C_nmim][BF₄], with alkyl chain substituents hexyl, octyl, and decyl. The liquid–liquid phase diagram for the system ([C₁₀mim][BF₄] + water) was experimentally determined. DNP amino acids distribute preferentially to the IL-rich phase and ([C₁₀mim][BF₄] + water) was found to be the system with the lowest partition coefficients for the solutes studied. The experimental partition coefficients decrease as the size of the alkyl side chain in the ionic liquids increases. The free energy of transfer of a methylene group between phases was calculated through the partition coefficients, which provides a measure of the relative hydrophobicity of the equilibrium phases. It was found that the system ([C₁₀mim][BF₄] + water) presents a lower free energy (and thus a lower relative hydrophobicity) than the system ([C₈mim][BF₄] + water). In order to better understand this result, the micellar behavior of the three ionic liquids was studied. Electrical conductivities of several aqueous solutions of the ionic liquids were measured to determine the critical micelle concentration (CMC) and the degree of micelle ionization, α, of the three ionic liquids. From these two properties it was possible to obtain the free energy of micellization, ΔG_mic, for the ionic liquids.     

Evaluation of the ionic liquids 1-alkyl-3-methylimidazolium hexafluorophosphate as a solvent for the extraction of benzene from cyclohexane: (Liquid + liquid) equilibria

In the catalytic hydrogenation of benzene to cyclohexane, the separation of unreacted benzene from the product stream is inevitable and essential for an economically viable process. In order to evaluate the separation efficiency of ionic liquids (ILs) as a solvent in this extraction processes, the ternary (liquid + liquid) equilibrium of 1-alkyl-3-methylimidazolium hexafluorophosphate, [C_nmim][PF₆] (n = 4, 5, 6), with benzene and cyclohexane was studied at T = 298.15 K and atmospheric pressure. The reliability of the experimentally determined tie-line data was confirmed by applying the Othmer–Tobias equation. The solute distribution coefficient and solvent selectivity for the systems studied were calculated and compared with literature data for other ILs and sulfolane. It turns out that the benzene distribution coefficient increases and solvent selectivity decreases as the length of the cation alkyl chain grows, and the ionic liquids [C_nmim][PF₆] proved to be promising solvents for benzene–cyclohexane extractive separation. Finally, an NRTL model was applied to correlate and fit the experimental LLE data for the ternary systems studied.     

(Liquid + liquid) equilibrium of aqueous biphasic systems composed of 1-benzyl or 1-hexyl-3-methylimidazolium chloride ionic liquids and inorganic salts

(Liquid + liquid) equilibria for {1-benzyl-3-methylimidazolium chloride ([BzMIM]Cl) or 1-hexyl-3-methylimidazolium chloride ([HMIM]Cl) + inorganic salts (potassium phosphate K₃PO₄, potassium carbonate K₂CO₃, or dipotassium hydrogen phosphate K₂HPO₄) + H₂O} aqueous biphasic systems (ABSs) are presented at T = 298.15 K. An empirical equation was used to correlate the binodal data. The experimental tie lines were appropriately correlated by the Othmer–Tobias and Brancroft empirical equations. The influence of the selected inorganic salts in the phase segregation was investigated by means the calculated effective excluded volume (EEV) and Setschenow-type equation. The salting-out ability of salts was also evaluated in terms of the Gibbs energy of hydration of salt (ΔG_hyd) and assessed with EEV values.     

The influence of 1-butyl-3-methyl-imidazolium bromide on the partitioning of l-tyrosine within the {polyethylene glycol 600 + potassium citrate} aqueous biphasic system at T = 298.15 K

Partitioning in aqueous biphasic systems (ABS) is widely recognized today as a rapid, gentle, and highly efficient technique for the separation of soluble as well as particulate biomaterials. This technique has gained increasing attention as the separation method of choice in biotechnology. In recent years, a new approach has been proposed based on the use of ionic liquids (ILs) as adjuvants for the separation and purification of bio-molecules using polymer-based ABS. In this regard, the influence of IL 1-butyl-3-methylimidazolium bromide ([C₄mim]Br) on the phase behavior and extraction capability of {PEG 600 + tri-potassium citrate (K₃C₆H₅O₇)} ABS for l-tyrosine (Tyr) is investigated here. For this purpose, phase diagrams and the liquid–liquid equilibrium (LLE) data for the {PEG 600 + K₃C₆H₅O₇} ABS with the addition of small quantities of IL were determined at T = 298.15 K. It was found that, for the studied polymer-based ABS, the addition of 5 wt% of [C₄mim]Br to ABS caused the expansion of two-phase area in the salt-rich region; while, for the PEG-rich region no change was observed. The partition coefficients of l-tyrosine (K_Tyr) within the studied system were determined at T = 298.15 K. The results obtained indicate that the addition of small quantities of [C₄mim]Br to the {PEG 600 + K₃C₆H₅O₇} ABS could enhance the extraction efficiency for l-tyrosine. In addition, the experimental data are correlated using the NRTL model. The comparisons between the correlation and the experimental data reveal a good agreement.     

(Vapour + liquid) equilibria,volumetric and compressibility behaviour of binary and ternary aqueous solutions of 1-hexyl-3-methylimidazolium chloride,methyl potassium malonate,and ethyl potassium malonate

(Vapour + liquid) equilibrium data (water activity, vapour pressure, osmotic coefficient, and activity coefficient) of binary aqueous solutions of 1-hexyl-3-methylimidazolium chloride ([C₆mim][Cl]), methyl potassium malonate, and ethyl potassium malonate and ternary {[C₆mim][Cl] + methyl potassium malonate} and {[C₆mim][Cl] + ethyl potassium malonate} aqueous solutions were obtained through the isopiestic method at T = 298.15 K. These results reveal that the ionic liquid behaves as surfactant-like and aggregates in aqueous solutions at molality about 0.4 mol · kg⁻¹. The constant water activity lines of all the ternary systems investigated show small negative deviations from the linear isopiestic relation (Zdanovskii–Stokes–Robinson rule) derived using the semi-ideal hydration model. The density and speed of sound measurements were carried out on solutions of methyl potassium malonate and ethyl potassium malonate in water and of [C₆mim][Cl] in aqueous solutions of 0.25 mol · kg⁻¹ methyl potassium malonate and ethyl potassium malonate at T = (288.15 to 308.15) K at atmospheric pressure. From the experimental density and speed of sound data, the values of the apparent molar volume, apparent molar isentropic compressibility and excess molar volume were evaluated and from which the infinite dilution apparent molar volume and infinite dilution apparent molar isentropic compressibility were calculated at each temperature. Although, there are no clear differences between the values of the apparent molar volume of [C₆mim][Cl] in pure water and in methyl potassium malonate or ethyl potassium malonate aqueous solutions, however, the results show a positive transfer isentropic compressibility of [C₆mim][Cl] from pure water to the methyl potassium malonate or ethyl potassium malonate aqueous solutions. The results have been interpreted in terms of the solute–water and solute–solute interactions.     

(Liquid + liquid) equilibria of (sulfolane + benzene + n-hexane), (N-formylmorpholine + benzene + n-hexane), and (sulfolane + N-formylmorpholine + benzene + n-hexane) at temperatures ranging from (298.15 to 318.15) K: Experimental results and correlation

The experimental (liquid + liquid) equilibrium (LLE) properties for two ternary systems containing (N-formylmorpholine + benzene + n-hexane), (sulfolane + benzene + n-hexane) and a quaternary mixed solvent system (sulfolane + N-formylmorpholine + benzene + n-hexane) were measured at temperature ranging from (298.15 to 318.15) K and at an atmospheric pressure. The experimental distribution coefficients and selectivity factors are presented to evaluate the efficiency of the solvents for extraction of benzene from n-hexane. The LLE results obtained indicate that increasing temperature decreases selectivity for all solvents. The LLE results for the systems studied were used to obtain binary interaction parameters in the UNIQUAC model by minimizing the root mean square deviations (RMSD) between the experimental and calculated results. Using the interaction parameters obtained, the phase equilibria in the systems were calculated and plotted. The calculated compositions based on the UNIQUAC model were found to be in good agreement with the experimental values. The result of the RMSD obtained by comparing the calculated and experimental two-phase compositions is 0.0163 for (N-formylmorpholine + benzene + n-hexane) system and is 0.0120 for (sulfolane + benzene + n-hexane) system.     

(Liquid + liquid) equilibrium of (NaNO3 + PEG 4000 + H2O) ternary system at different temperatures

Phase diagram and (liquid + liquid) equilibrium (LLE) data for the (NaNO₃ + polyethylene glycol 4000 (PEG 4000) + H₂O) system have been determined experimentally at T = (288.15 and 308.15) K. The effects of temperature on the binodal curves and tie-lines have been studied and it was found that an increasing in temperature caused the expansion of two-phase region. The Chen-NRTL, modified Wilson and UNIQUAC models were used to correlate the experimental tie-line data. The results show that the quality of fitting is better with the UNIQUAC model.     

(Liquid + liquid) equilibria for ternary mixtures of (alkane + benzene + [EMpy] [ESO4]) at several temperatures and atmospheric pressure

In this work, the separation of benzene from aliphatic hydrocarbons (hexane, or heptane) is investigated by extraction with 1-ethyl-3-methylpyridinium ethylsulphate ionic liquid, [EMpy][ESO₄]. (Liquid + liquid) equilibria (LLE) data are determined for the ternary systems: {hexane (1) + benzene (2) + [EMpy][ESO₄] (3)} at T = (283.15, 293.15, 298.15, and 303.15) K and {heptane (1) + benzene (2) + [EMpy][ESO₄] (3)} at T = (283.15 and 298.15) K and atmospheric pressure. The selectivity and distribution coefficient, derived from the tie line data, were used to determine whether the ionic liquid is a good solvent for the extraction of aromatic from aliphatic compounds. The consistency of the tie line data was ascertained by applying the Othmer–Tobias and Hand equations. The experimental results for the ternary systems were well correlated with the NRTL equation. A study of the temperature effect and the influence of the chain length of the alkanes were realized. The results obtained were compared with other ionic liquids. There are no literature data for the mixtures discussed in this paper.     

(Solid + liquid) equilibria predictions of ionic liquid containing systems using COSMO-RS

(Solid + liquid) equilibria (SLE) prediction are an important phase equilibria property for ionic liquid (IL) mixtures especially when the IL exists as a solid. In this work, the SLE for the binary systems of (IL + thiophene) consisting of the ILs: n-butyl-4-methylpyridinium tosylate [BM₄Py][TOS], n-butyl-3-methylpyridinium tosylate [BM₃Py][TOS], n-hexyl-3-methylpyridinium tosylate [HM₃Py][TOS], and 1,4-dimethylpyridinium tosylate [M_1,4Py][TOS] are predicted using the quantum chemical based COSMO-RS (COnductor like Screening MOdel for Real Solvents) model. Initially, benchmarking studies are performed on binary mixtures which are known beforehand. The values of the predicted solubility are then compared with the experimental results by calculating the root mean square error (RMSE). The SLE predictions of the solubility of pyrene and dibenzothiophene in five different solvents were carried out giving an average RMSE of 4%. Further the applicability of COSMO-RS to binary systems consisting of (ionic liquid + alcohol) mixtures and (ionic liquid + hydrocarbons) are predicted. The ionic liquids concerned are n-butyl-3-methylpyridinium tosylate [BM₃Py][TOS] while the alcohols and hydrocarbons are 1-butanol, 1-hexanol, 1-octanol, 1-decanol, and benzene, toluene, ethylbenzene, n-propylbenzene respectively. The experimental data for the ionic liquid [BM₄Py][TOS] with thiophene gave the smallest deviation of 10.2%. The overall RMSE for IL–thiophene, IL–alcohol, and IL–hydrocarbons were 15%, 17.2% and 12.9% respectively. Thus the predicted solubility values were found to be in reasonable agreement with the experimental values.     

Effects of external electromagnetic field on binodal curve of (water + propionic acid + dichloromethane) ternary system

The effects of an external electromagnetic field on the binodal curve of the (water + propionic acid + dichloromethane) ternary system was investigated at 91.3 kPa and T = (294.15 and 284.15) K. The experimental binodal curve values for the ternary system were obtained by the cloud point method using a new setup with a flat capacitor. The effects of variation of frequencies and amplitude of voltages of the applied external electromagnetic field on the binodal curve results have been evaluated. The results obtained indicate that the heterogeneous two-phase area increases with increasing frequency of the applied external electromagnetic field. At constant frequency, a similar effect has been found by increasing the amplitude of the voltage of the applied external electromagnetic field. The comparison between the results obtained for this work with those reported in previous work indicates that the treatment efficiency in liquid–liquid extraction process of (water + propionic acid + dichloromethane) ternary system can be governed by the applied external electromagnetic field.     

Solubilities of imidazolium-based ionic liquids in aqueous salt solutions at 298.15 K

The solubilities of ionic liquids in the ternary systems (ionic liquid + H₂O + inorganic salt) were reported at 298.15 K and atmospheric pressure. The examined ionic liquids are [C₄mim][PF₆] (1-n-butyl-3-methylimidazolium hexafluorophosphate), [C₈mim][PF₆] (1-n-octyl-3-methylimidazolium hexafluorophosphate), and [C₈mim][BF₄] (1-n-octyl-3-methylimidazolium tetrafluoroborate). The examined inorganic salts are the chloride-based salts (sodium chloride, lithium chloride, potassium chloride, and magnesium chloride) and the sodium-based salts (sodium thiocyanate, sodium nitrate, sodium trifluoroacetate, sodium bromide, sodium iodide, sodium perchlorate, sodium acetate, sodium hydroxide, sodium dihydrogen phosphate, sodium phosphate, sodium tetrafluoroborate, sodium sulfate, and sodium carbonate). The effects of the cations and the anions of the ionic liquids and of the inorganic salts on the solubility of the ionic liquids in the ternary solutions were systematically compared and discussed.     

(Liquid + liquid) equilibrium for the ternary systems {heptane + toluene + 1-allyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide} and {heptane + toluene + 1-methyl-3-propylimidazolium bis(trifluoromethylsulfonyl)imide} ionic liquids

The (liquid + liquid) equilibrium (LLE) data for two systems containing heptane, toluene, and 1-methyl-3-propylimidazolium bis(trifluoromethylsulfonyl)imide ([mpim][Tf₂N]) or 1-allyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([amim][Tf₂N]) ionic liquids (ILs) were determined at T = 313.2 K and atmospheric pressure. The effect of a double bond in an alkyl side chain in the imidazolium cation was evaluated in terms of selectivity and extractive capacity. The results show a decrease of the amount of toluene and heptane dissolved in the IL with the allyl group. Thus, the distribution ratios of toluene and heptane of [mpim][Tf₂N] IL are higher than those of [amim][Tf₂N] IL. On the other hand, the separation factor of the [amim][Tf₂N] IL increases comparing to [mpim][Tf₂N] IL. The NRTL model was used to correlate satisfactorily the experimental LLE data for the two studied ternary systems.     

Prediction of thermophysical properties of novel ionic liquids based on serine [Cnmim][Ser] (n = 3, 4) using semiempirical methods

Two novel ionic liquids based on serine [C_nmim][Ser] (n = 3, 4) were prepared by the neutralization method and their structures were confirmed by ¹H NMR spectroscopy and differential scanning calorimetry (DSC). The density, surface tension, and refractive index of the two ILs were measured from T = (298.15 to 338.15) K. Since these ILs [C_nmim][Ser] (n = 3, 4) could form strong hydrogen bonds with water, small amount of water in the ILs is difficult to removed by common methods. In order to eliminate the effect of trace of water, the standard addition method (SAM) was applied to these measurements. On the basis of the experimental data, the speed of sound (μ), thermal expansion coefficient (α), molecular volume (V_m), standard entropy (S⁰298), entropy of surface (S_a), energy of surface (E_a), parachor (P), molar polarization (R_m), and polarization coefficient (α_p) were calculated, and the relationship between each of these properties of [C_nmim][Ser] (n = 3, 4) and temperatures was discussed. According to the additivity, the average value of anionic parachor, P_−(ave), was 180.81 for [Ser]⁻. At the same time, the surface tension of these serine ionic liquids could be estimated from their parachor and refractive index. The estimated values of the surface tension and the corresponding experimental data were almost identical.     

The effect of temperature and molar mass on the (liquid + liquid) equilibria of (poly ethylene glycol dimethyl ether + di-sodium hydrogen citrate + water) systems: Experimental and correlation

The (liquid + liquid) equilibrium for the {polyethylene glycol dimethyl ether 2000 (PEGDME₂₀₀₀) + di-sodium hydrogen citrate + H₂O} system was studied at T = (298.15, 308.15 and 318.15) K and atmospheric pressure (≈85 kPa). The free energies, enthalpies and entropies of cloud points were calculated in order to investigate the driving force formation of this two-phase system. To investigate the effect of molar mass of the polymer on the binodals and tie-lines, similar measurements were also made at T = 298.15 K on this two-phase system consisting of the PEGDME with molar masses of 500 and 250 g ⋅ mol⁻¹. The effective excluded volume model was used for representation of the phase-forming ability in PEGDME systems. An empirical and the Merchuck equations with the temperature dependency were used to correlate the binodal curves. The Othmer–Tobias and Bancraft and Setschenow equations, the osmotic virial and the extended NRTL models were used to fit the tie-line data.     

(Liquid + liquid) equilibria of (water + butyric acid + dibasic esters) ternary systems

(Liquid + liquid) equilibrium (LLE) data of the solubility (binodal) curves and tie-line end compositions were examined for mixtures of {water (1) + butyric acid (2) + dimethyl succinate or dimethyl glutarate or dimethyl adipate (3)} at T = 298.15 K and p = (101.3 ± 0.7) kPa. The relative mutual solubility of the butyric acid is higher in the dibasic esters layers than in the aqueous layer. The reliability of the experimental tie-line data was confirmed by using the Othmer–Tobias correlation. The LLE data of the ternary systems were predicted by UNIFAC method. Distribution coefficients and separation factors were evaluated for the immiscibility region.     

(Liquid + liquid) equilibria of (water + butyric acid + esters) ternary systems

(Liquid + liquid) equilibrium (LLE) data of the solubility (binodal) curves and tie-line end compositions were examined for mixtures of {water (1) + butyric acid (2) + ethyl propionate or dimethyl phthalate or dibutyl phthalate (3)} at T = 298.15 K and (101.3 ± 0.7) kPa. The relative mutual solubility of the butyric acid is higher in the layers of esters than in the aqueous layer. The reliability of the experimental tie-line data was confirmed by using the Othmer–Tobias correlation. The LLE data of the ternary systems were predicted by UNIFAC method. Distribution coefficients and separation factors were evaluated for the immiscibility region.     

(Surfactant + polymer) interaction parameter studied by (liquid + liquid) equilibrium data of quaternary aqueous solution containing surfactant,polymer, and salt

(Liquid + liquid) equilibrium (LLE) data of quaternary aqueous system containing polyoxyethylene (20) cetyl ether (with abbreviation name Brij 58, non-ionic surfactant), diammonium hydrogen phosphate, and poly ethylene glycol (PEG) with three molar masses {M_W = (1000, 6000, and 35,000) g · mol^?1} have been determined experimentally at T = 313.15 K.Furthermore, the Flory–Huggins theory with two electrostatic terms (Debye–Hückel and Pitzer–Debye–Hückel equations) have been used to calculate the phase behavior of the quaternary systems and (surfactant + polymer) interaction parameter as well as interaction parameters between other species. Temperature dependency of the parameters of the Flory–Huggins theory has been obtained.Also an effort have been done to show that addition of PEG as well as increasing the temperature can shift the binodal curves of the ternary aqueous system containing surfactant and salt to lower mole fraction of salt. Also the effect of polymer molar mass on the binodal diagram displacement has been discussed.     

Ternary (liquid + liquid) equilibria for mixtures of (methanol + aniline + n-octane or n-dodecane) at T = 298.15 K

(Liquid + liquid) equilibrium (LLE) data for the ternary mixtures of (methanol + aniline + n-octane) and (methanol + aniline + n-dodecane) at T = 298.15 K and ambient pressure are reported. The compositions of liquid phases at equilibrium were determined and the results were correlated with the UNIQUAC and NRTL activity coefficient models. The partition coefficients and the selectivity factor of methanol for the extraction of aniline from the (aniline + n-octane or n-dodecane) mixtures are calculated and compared. Based on these comparisons, the efficiency of methanol for the extraction of aniline from (aniline + n-dodecane) mixtures is higher than that for the extraction of aniline from (aniline + n-octane) mixtures. The phase diagrams for the ternary mixtures including both the experimental and correlated tie lines are presented. From the phase diagrams and the selectivity factors, it is concluded that methanol may be used as a suitable solvent in extraction of aniline from (aniline + n-octane or n-dodecane) mixtures.     

(Liquid + liquid) and (liquid + solid) equilibrium of aqueous two-phase systems containing poly ethylene glycol di-methyl ether 2000 and di-sodium hydrogen phosphate

(Liquid + liquid) equilibrium (LLE) for the {poly ethylene glycol di-methyl ether 2000 (PEGDME₂₀₀₀) + Na₂HPO₄ + H₂O} system have been determined experimentally at T = (298.15, 308.15, 313.15, and 318.15) K. The effects of temperature on the binodals and tie-lines for the investigated aqueous two-phase system (ATPS) have been studied. An empirical non-linear expression developed by Merchuk was used for reproducing the experimental binodal data. In this work, the three fitting parameters of the Merchuk equation were obtained with the temperature dependence expressed in the linear form with (T ? T₀) K as a variable. Furthermore, the modified local composition segment-based NRTL and Wilson models and also osmotic virial equation were used to describe the LLE data of the studied system. Also, the effects of the type of salt on LLE are discussed. In addition, the effects of end groups of the polymers PEGDME₂₀₀₀ and poly ethylene glycol 2000 on phase forming ability were studied. The complete phase diagram for the poly ethylene {glycol di-methyl ether 2000 (PEGDME₂₀₀₀) + Na₂HPO₄ + H₂O} system has also been determined at T = 298.15 K.