(Liquid + liquid) equilibrium of (NaNO3 + PEG 4000 + H2O) ternary system at different temperatures

Phase diagram and (liquid + liquid) equilibrium (LLE) data for the (NaNO₃ + polyethylene glycol 4000 (PEG 4000) + H₂O) system have been determined experimentally at T = (288.15 and 308.15) K. The effects of temperature on the binodal curves and tie-lines have been studied and it was found that an increasing in temperature caused the expansion of two-phase region. The Chen-NRTL, modified Wilson and UNIQUAC models were used to correlate the experimental tie-line data. The results show that the quality of fitting is better with the UNIQUAC model.     

(Liquid + liquid) equilibria for ternary mixtures of (polyvinylpyrrolidone + MgSO4 + water) at different temperatures

Experimental (liquid + liquid) equilibrium (LLE) data were determined for a ternary system (polyvinylpyrrolidone + MgSO₄ + water) at various temperatures of (298.15, 303.15, and 308.15) K. The UNIQAC, modified regular solution, modified Wilson and Chen-NRTL models were used to correlate the experimental tie-line data. The results show that at each temperature, the quality of fitting is better with the Chen-NRTL model.     

Experimental (vapour + liquid) equilibrium data of (methanol + water), (water + glycerol) and (methanol + glycerol) systems at atmospheric and sub-atmospheric pressures

Experimental (vapour + liquid) equilibrium results for the binary systems, (methanol + water) at the local atmospheric pressure of 95.3 kPa and at sub-atmospheric pressures of (15.19, 29.38, 42.66, 56.03, and 67.38) kPa, (water + glycerol) system at pressures (14.19, 29.38, 41.54, 54.72, 63.84, and 95.3) kPa and the (methanol + glycerol) system at pressures (32.02 and 45.3) kPa were obtained over the entire composition range using a Sweitoslwasky-type ebulliometer. The relationship of the liquid composition (x₁) as a function of temperature (T) was found to be well represented by the Wilson model. Computed vapour phase mole fractions, activity coefficients and the measured values along with optimum Wilson parameters are presented.     

Isobaric (vapor + liquid) equilibrium data for the binary system methanol + 2-butyl alcohol and the quaternary system methyl acetate + methanol + 2-butyl alcohol + 2-butyl acetate at P = 101.33 kPa

In this paper, isobaric (vapor + liquid) equilibrium (VLE) data for the binary system methanol + 2-butyl alcohol and the quaternary system methyl acetate + methanol + 2-butyl alcohol + 2-butyl acetate were determined at P = 101.33 kPa in a modified Rose still. The binary VLE data were found to be thermodynamic consistency by the Herrington method. The VLE data for the binary system were correlated by the Wilson and NRTL equations respectively, which were used to predict the VLE data of the quaternary system. The results showed that the Wilson and NRTL models matched well with the (vapor + liquid) phase equilibrium data. The deviations for the vapor-phase compositions and the equilibrium temperatures are reasonably small and the models are both suitable for these systems.     

(Vapour + liquid) equilibria,densities, excess molar volumes,refractive indices,speed of sound for (methanol + allyl acetate) and (vinyl acetate + allyl acetate)

Isobaric (vapour  +  liquid) equilibria were determined atp =  101.3 kPa for {methanol  +  allyl acetate (3-acetoxy-1-propene)} and {vinyl acetate (1-acetoxyethylene)  +  allyl acetate}. The thermodynamic consistency of the experimental data was determined with a modified Dechema test. The activity coefficients were correlated with Margules, van Laar, NRTL, UNIQUAC, Wilson and ASOG. Densities, excess molar volumes, refractive indices, speed sounds and changes of refractive index and speed sound on mixing have been determined at 298.15 K and the results fitted to Redlich–Kister polynomials. Allyl acetate can be a possible solvent for extractive distillation.     

Quaternary (liquid + liquid) equilibria for (water + 2-propanol + 1,1-dimethylethyl methyl ether + diisopropyl ether) at the temperature 298.15 K

(Liquid + liquid) equilibrium tie-lines were measured for one ternary system {x₁H₂O + x₂(CH₃)₂CHOH + (1 − x₁ − x₂)CH₃C(CH₃)₂OCH₃} and one quaternary system {x₁H₂O + x₂(CH₃)₂CHOH + x₃CH₃C(CH₃)₂OCH₃ + (1 − x₁ − x₂ − x₃)(CH₃)₂CHOCH(CH₃)₂} at T = 298.15 K and P^∘ = 101.3 kPa. The experimental (liquid + liquid) equilibrium results were satisfactorily correlated by modified and extended UNIQUAC models both with ternary and quaternary parameters in addition to binary ones.     

(Liquid + liquid) equilibria of (sulfolane + benzene + n-hexane), (N-formylmorpholine + benzene + n-hexane), and (sulfolane + N-formylmorpholine + benzene + n-hexane) at temperatures ranging from (298.15 to 318.15) K: Experimental results and correlation

The experimental (liquid + liquid) equilibrium (LLE) properties for two ternary systems containing (N-formylmorpholine + benzene + n-hexane), (sulfolane + benzene + n-hexane) and a quaternary mixed solvent system (sulfolane + N-formylmorpholine + benzene + n-hexane) were measured at temperature ranging from (298.15 to 318.15) K and at an atmospheric pressure. The experimental distribution coefficients and selectivity factors are presented to evaluate the efficiency of the solvents for extraction of benzene from n-hexane. The LLE results obtained indicate that increasing temperature decreases selectivity for all solvents. The LLE results for the systems studied were used to obtain binary interaction parameters in the UNIQUAC model by minimizing the root mean square deviations (RMSD) between the experimental and calculated results. Using the interaction parameters obtained, the phase equilibria in the systems were calculated and plotted. The calculated compositions based on the UNIQUAC model were found to be in good agreement with the experimental values. The result of the RMSD obtained by comparing the calculated and experimental two-phase compositions is 0.0163 for (N-formylmorpholine + benzene + n-hexane) system and is 0.0120 for (sulfolane + benzene + n-hexane) system.     

(Solid + liquid) equilibria of (nalkanes + ethyl 1,1-dimethylpropyl ether)

(Solid  +  liquid) equilibria (s.l.e.) have been measured atT >  280 K for (octadecane, or nonadecane, or eicosane, or heneicosane, or docosane, or tricosane, or tetracosane, or hexacosane, or heptacosane, or octacosane  +  ethyl 1,1-dimethylpropyl ether ETAE). The experimental results are compared with values calculated by means of the Wilson, UNIQUAC and NRTL equations utilizing parameters derived from the experimental s.l.e. The existence of a (solid  +  solid) first-order phase transition in hydrocarbons has been taken into consideration in the solubility calculations. The solubility of hydrocarbons in branched-chain ethers is lower than that in n -alkanes but higher than that in cycloalkanes, branched alkanes, 1-alcohols andtert -alcohols. The best correlation of the solubility data has been obtained by the NRTL equation where the average root-mean-square deviation of the solubility temperatures is 0.36 K.     

Salt effect on (liquid + liquid) equilibrium of (water + tert-butanol + 1-butanol) system: Experimental data and correlation

(Liquid + liquid) equilibrium data for the quaternary systems (water + tert-butanol + 1-butanol + KBr) and (water + tert-butanol + 1-butanol + MgCl₂) were experimentally determined at T = 293.15 K and T = 313.15 K. For mixtures with KBr, the overall salt concentrations were 5 and 10 mass percent; for mixtures with MgCl₂, the overall salt concentrations were 2 and 5 mass percent. The experimental results were used to estimate molecular interaction parameters for the NRTL activity coefficient model, using the Simplex minimization method and a concentration-based objective function. The correlation results are extremely satisfactory, with deviations in phase compositions below 1.7%.     

Thermodynamic study of the system (LiCl + LiNO3 + H2O)

The solubility of the binary system (LiNO₃ + H₂O) from T = 273.15 K to T = 333.15 K and solubility isotherms of the ternary system (LiCl + LiNO₃ + H₂O) were elaborately measured at T = 273.15 K and T = 323.15 K. These solubility data, as well as water activities in the binary systems from the literature, were treated by an empirically modified BET model. The isotherms of the ternary system (LiCl + LiNO₃ + H₂O) were reproduced and a complete phase diagram of the ternary system in the temperature range from 273.15 K to 323.15 K predicted. It is shown that the solubility data for the binary system (LiNO₃ + H₂O) measured in this work are slightly different from the literature data. Simulated results showed that the saturated salt solution of (2.8LiCl + LiNO₃) is in equilibrium with the stable solid phase LiNO₃(s) over the temperature range from 283.15 K to 323.15 K, other than the solid phases LiNO₃ · 3H₂O(s) and LiClH₂O(s) as reported by Iyoki et al. [S. Iwasaki, Y. Kuriyama. T. Uemura, J. Chem. Eng. Data 38 (1993) 396–398].     

(Liquid + liquid) and (liquid + solid) equilibrium of aqueous two-phase systems containing poly ethylene glycol di-methyl ether 2000 and di-sodium hydrogen phosphate

(Liquid + liquid) equilibrium (LLE) for the {poly ethylene glycol di-methyl ether 2000 (PEGDME₂₀₀₀) + Na₂HPO₄ + H₂O} system have been determined experimentally at T = (298.15, 308.15, 313.15, and 318.15) K. The effects of temperature on the binodals and tie-lines for the investigated aqueous two-phase system (ATPS) have been studied. An empirical non-linear expression developed by Merchuk was used for reproducing the experimental binodal data. In this work, the three fitting parameters of the Merchuk equation were obtained with the temperature dependence expressed in the linear form with (T ? T₀) K as a variable. Furthermore, the modified local composition segment-based NRTL and Wilson models and also osmotic virial equation were used to describe the LLE data of the studied system. Also, the effects of the type of salt on LLE are discussed. In addition, the effects of end groups of the polymers PEGDME₂₀₀₀ and poly ethylene glycol 2000 on phase forming ability were studied. The complete phase diagram for the poly ethylene {glycol di-methyl ether 2000 (PEGDME₂₀₀₀) + Na₂HPO₄ + H₂O} system has also been determined at T = 298.15 K.     

Measurement and prediction of (solid + liquid) equilibria of (alkanediamine + biphenyl) mixtures

Diamines represent, besides many technically important classes of substance, a particularly interesting family of molecules for the purpose of testing group-contribution models.A differential scanning calorimetry (DSC) was used to determine binary (solid + liquid) phase equilibria for {diamines NH₂–(CH₂)_n–NH₂ (n = 6, 8, 9, and 12) + biphenyl} mixtures. Results obtained with this technique are compared with those predicted by modified UNIFAC (Larsen and Gmehling) and DISQUAC models. It was found out that all the systems are eutectic and deviations were observed between experimental and predicted SLE.     

Thermodynamic properties of (tetradecane + benzene, + toluene, + chlorobenzene, + bromobenzene, + anisole) binary mixtures at T = (298.15, 303.15, and 308.15) K

Density ρ, viscosity η, and refractive index n_D, values for (tetradecane + benzene, + toluene, + chlorobenzene, + bromobenzene, + anisole) binary mixtures over the entire range of mole fraction have been measured at temperatures (298.15, 303.15, and 308.15) K at atmospheric pressure. The speed of sound u has been measured at T = 298.15 K only. Using these data, excess molar volume V^E, deviations in viscosity Δη, Lorentz–Lorenz molar refraction ΔR, speed of sound Δu, and isentropic compressibility Δk_s have been calculated. These results have been fitted to the Redlich and Kister polynomial equation to estimate the binary interaction parameters and standard deviations. Excess molar volumes have exhibited both positive and negative trends in many mixtures, depending upon the nature of the second component of the mixture. For the (tetradecane + chlorobenzene) binary mixture, an incipient inversion has been observed. Calculated thermodynamic quantities have been discussed in terms of intermolecular interactions between mixing components.     

Thermodynamic investigation of the (LiF + NaF + CaF2 + LaF3) system

In this work a thermodynamic assessment of the (LiF + NaF + CaF₂ + LaF₃) system is reported. For the thermodynamic modeling of the liquid phase, the classical polynomial model, and the modified quasi-chemical model were used in parallel and compared. The extrapolation to higher order systems was done according to the Toop mathematical formalism. Furthermore, differential-scanning calorimetry data of the ternary (LiF + CaF₂ + LaF₃), (NaF + CaF₂ + LaF₃), and the quaternary (LiF + NaF + CaF₂ + LaF₃) mixtures are presented. Good agreement between the experimental data and the thermodynamic assessment was obtained.     

Equilibrium solubility of sodium 2-naphthalenesulfonate in binary (sodium chloride + water), (sodium sulfate + water), and (ethanol + water) solvent mixtures at temperatures from (278.15 to 323.15) K

The equilibrium solubility of sodium 2-naphthalenesulfonate in binary (sodium chloride + water), (sodium sulfate + water), and (ethanol + water) solvent mixtures was measured at elevated temperatures from (278.15 to 323.15) K using a steady-state method. With increasing temperatures, the solubility increases in aqueous solvent mixtures. The results of these results were regressed by a modified Apelblat equation. The dissolution entropy and enthalpy determined using the method of the least-squares and the change of Gibbs free energy calculated with the values of Δ_diffS^o and Δ_diffH^o at T = 278.15 K.     

Thermodynamic evaluation and optimization of the (NaCl + KCl + MgCl2 + CaCl2 + MnCl2 + FeCl2 + CoCl2 + NiCl2) system

A complete critical evaluation of all available phase diagram and thermodynamic data has been performed for all condensed phases of the (NaCl + KCl + MgCl₂ + CaCl₂ + MnCl₂ + FeCl₂ + CoCl₂ + NiCl₂) system, and optimized model parameters have been found. The (MgCl₂ + CaCl₂ + MnCl₂ + FeCl₂ + CoCl₂ + NiCl₂) subsystem has been critically evaluated in a previous article. The model parameters obtained for the binary subsystems can be used to predict thermodynamic properties and phase equilibria for the multicomponent system. The Modified Quasichemical Model was used for the molten salt phase, and the (MgCl₂ + MnCl₂ + FeCl₂ + CoCl₂ + NiCl₂) solid solution was modeled using a cationic substitutional model with an ideal entropy and an excess Gibbs free energy expressed as a polynomial in the component mole fractions. Finally, the (Na,K)(Mg,Ca,Mn,Fe,Co,Ni)Cl₃ and the (Na,K)₂(Mg,Mn,Fe,Co,Ni)Cl₄ solid solutions were modeled using the Compound Energy Formalism.     

Modeling of the quaternary NaCl + KCl + CH3OH + H2O mixed electrolyte system: Binary and ternary mixing (ion + ion) and (ion + nonelectrolyte) interaction parameters

The purpose of this work is modeling of the quaternary system of mixed NaCl + KCl electrolyte in mixed CH₃OH + H₂O solvent, with different alcohol mass fractions by using particularly, the Pitzer (P) and Pitzer–Esteso (PE) equations and based on potentiometric measurement technique. The experimental data are obtained by different molal salt ratio r (r = m_NaCl/m_KCl = 100, 150, 200 and 250) in mixed solvent with different alcohol mass fractions x (x = 0.10, 0.20, 0.30, 0.40, and 0.50) in water. A galvanic cell is employed for collecting the potentiometric data by combining a Na⁺ glass membrane and Ag/AgCl electrodes and using different series of electrolyte solutions, at defined constant ionic strengths, with the molality ranging from 0.0005 up to 3.5 mol · kg⁻¹, at T = 298.15 ± 0.05 K of experiments. Comparison of the models shows that the modified Pitzer equation by Esteso (PE) present a better fit of the experimental data.     

Evaluation of (vapor + liquid) equilibria for the binary systems (1-octanol + cyclohexane) and (1-octanol + n-hexane), at low alcohol compositions

Isobaric (vapor + liquid) equilibrium at p = 101.32 kPa of pressure has been determined for the systems (1-octanol + cyclohexane) and (1-octanol + n-hexane), at low alcohol mole fractions. These data were satisfactorily correlated, using ASPEN PLUS^® commercial software, with Wilson, NRTL, and UNIQUAC activity coefficient models to obtain the binary interaction parameters of both mixtures. Also, UNIFAC group contribution method was employed to predict the equilibrium of both mixtures. With regression values an accurate knowledge of (vapor + liquid) equilibrium for both mixtures can be reached in a range of 1-octanol mole fractions less than 0.1. UNIFAC method provides acceptable results for (1-octanol + n-hexane) system but not for (1-octanol + cyclohexane) system.     

High-pressure (vapor + liquid) equilibria in the (nitrogen + n-heptane) system

In this work, new (vapor + liquid) equilibrium data for the (N₂ + n-heptane) system were experimentally measured over a wide temperature range from (313.6 to 523.7) K and pressures up to 50 MPa. A static-analytic apparatus with visual sapphire windows and pneumatic capillary samplers was used in the experimental measurements. Equilibrium phase compositions and (vapor + liquid) equilibrium ratios are reported. The new results were compared with those reported by other authors. The comparison showed that the pressure–composition data reported in this work are less scattered than those determined by others. Hence, the results demonstrate the reliability of the experimental apparatus at high temperatures and pressures. The experimental data were represented with the PR and PC-SAFT equations of state by using one-fluid mixing rules and a single temperature independent interaction parameter. Results of the representation showed that the PC-SAFT equation was superior to the PR equation in correlating the experimental data of the (N₂ + n-heptane) system.     

Volumetric study of (2-methoxyethanol + tetrahydrofuran + cyclohexane) at T=298.15 K

The excess molar volumes V_m^E at T=298.15 have been determined in the whole composition domain for (2-methoxyethanol + tetrahydrofuran + cyclohexane) and for the parent binary mixtures. Data on V_m^E are also reported for (2-ethoxyethanol + cyclohexane). All binaries showed positive V_m^E values, small for (methoxyethanol + tetrahydrofuran) and large for the other ones. The ternary V_m^E surface is always positive and exhibits a smooth trend with a maximum corresponding to the binary (2-methoxyethanol + cyclohexane). The capabilities of various models of either predicting or reproducing the ternary data have been compared. The behaviour of V_m^E and of the excess apparent molar volume of the components is discussed in both binary and ternary mixtures. The results suggest that hydrogen bonding decreases with alcohol dilution and increases with the tetrahydrofuran content in the ternary solutions.