一种新型铱(Ⅲ)配合物及其有机电致发光器件

报道了一种新的基于2,5-二（4’-乙基苯基）吡啶配体的铱（Ⅲ）配合物,并用于有机电致发光器件,得到λmax=548nm的绿光发射,其最大发光效率为23cd／A,最大亮度为10800cd／m^2。与基于其他绿光铱（Ⅲ）配合物的器件相比,该器件的电流饱和特性也得到进一步改善。     

高亮度下具有较高效率的绿色和蓝绿色有机电致发光器件的制备和性能研究(英文)

以铱配合物Ir(tfmppy)2(tpip)(1,tfmppy=4-三氟甲基苯基吡啶,tpip=四苯基膦酰胺)和Ir(dfp-py)2(tpip)(2,dfppy=4,6-二氟苯基吡啶)为发光中心分别制备了绿色和蓝绿色有机电致发光器件ITO/TAPC(1,1-bis[4-[N,N-di(p-tolyl)amino]phenyl]cyclohexane,60 nm)/Ir(Ⅲ)complex(x%,质量分数)∶Sim-CP(3,5-bis(9-carbazolyl)tetraphenylsilane,40 nm)/TPBi(2,2’,2″-(1,3,5-benzinetriyl)-tris(1-phenyl-1-H-benzimidazole,60 nm)/LiF(1 nm)/Al(100 nm)。配合物Ir(tfmppy)2(tpip)掺杂质量分数为6%时,以其为发光中心的绿色器件在5 930 cd/m2亮度下的最大电流效率为47.10 cd/A,CIE色坐标为(0.28,0.65),在16.4V驱动电压下的最大发光亮度为38 674 cd/m2。配合物Ir(dfppy)2(tpip)掺杂质量分数为10%时,以其为发光中心的蓝绿色器件在3 175 cd/m2亮度下的最大电流效率为14.80 cd/A,色坐标为(0.15,0.50),在11.8 V驱动电压下的最大发光亮度为25 985 cd/m2。     

核-壳结构ZnS:Tb/CdS纳米晶的电致发光

利用微乳液方法合成出粒径为4nm的核．壳结构ZnS：Tb／CdS纳米晶。用XRD、TEM及荧光光谱等手段对合成的纳米晶的结构、形态和光学特性分别进行了表征。将ZnS：Tb／CdS纳米晶制作成有机-无机杂化结构电致发光器件,其结构为ITO／poly（3,4-ethylene dioxythiophene）：poly（styrene sulfonate）（PEDOT-PSS）（70nm）／poly（vinyleobarzale）（PVK）（100nm）／ZnS：Tb／CdS纳米晶（120nm）／2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline（BCP）（30nm）／LiF（1．0nm）／Al（100nm）。当驱动电压为13V时,可以测到Tb^3＋离子的两个特征峰。在电致发光光谱中未测到聚合物PVK的发光,说明电子和空穴是在纳米晶层上复合的。当驱动电压为25V时,得到器件的最大亮度为19cd／m^2。     

一种新型铽、钆稀十配合物的发光特性

合成了一种新型的铽、钆稀土配合物TbGd（BA）6（bipy）2，把它作为发光材料应用于有机电致发光器件中。为改善稀土配合物的载流子传输能力并避免其在真空蒸发时的热分解，实验中将铽、钆稀土配合物TbGd（BA）6（bipy）2掺入高分子导电聚合物Poly（N-vinycarbazole）（PVK）中，用旋涂的方式制备发光层，并制成电致发光器件。通过测量器件的光致和电致发光光谱，均得到纯正的、明亮的Tb^3＋离子的绿光发射，四个特征峰分别位于489，545，585，620nm，分别对应着能级^5D4→^7FJ（J=6，5，4，3）的跃迁。讨论了共混体系的发光特性和能量传递机理。稀土配合物的光敏发光是由于外部直接激发及PVKt到稀土配合物的能量传递。电致发光有两个途径，PVK到稀土配合物的能量传递及载流子的直接俘获。在双层器件中，发光区域随Alq3厚度变化，尤其是在高电压下，激子复合区域移向Alq3一侧。优化后，多层器件在电压为13V时，达到最高亮度183cd／m^2，得到明亮的铽的绿色发光。     

含载流子基团的红色磷光铱配合物的电致发光特性

将含载流子基团的铱配合物Ir-1或Ir-2掺杂到聚芴(PFO)和2-(4-二苯基)-5-(4-叔丁苯基)-1,3,4-噁二唑(PBD)中作为发光层,采用旋涂法制备电致发光器件。通过改变发光层中铱配合物的掺杂浓度,研究了不同掺杂比例对器件性能的影响。结果表明,当铱配合物的掺杂质量分数为2%时,器件的电致发光性能最好。和含苯基的Ir-1比较发现,以含空穴传输基团三苯胺的Ir-2为客体材料的器件性能更好,能够更有效地避免T-T猝灭,器件的最大流明效率为2.78 cd·A-1,最大亮度为5 718 cd·m-2。     

稳定的蓝色及白色有机薄膜电致发光器件

报道了一种稳定的蓝色和白色有机薄膜电致发光器件,蓝色器件最大亮度为7526cd／m^2,最大效率1．451m／W,半亮度寿命1035h(初始亮度l00cd／m^2)。白色器件的最大亮度为14850cd／m^2,最大效率2．881m／W,色度x=0．31,y=0．38,且色度不随电流增大而变化,半亮度寿命为2860h(初始亮度100cd／m^2)。     

稳定的光谱不随电流变化而改变的白色有机发光器件

使用新材料构成了两种结构白色有机薄膜电致发光器件，一种是蓝色及红色发射在同一层中，另一种是蓝色发射和红色发射分别在两层中，器件结构分别为ITO／CuPc／NPB／JBEM（P）：DCJT／Alq／MgAg（器件1）和ITO／CuPc／NPB／JBEM（P）／Alq：DCJT／Alq／MgAg（器件2）。这里（CuPc）是空穴注入层；N，N’－bis－（1－naphthyl）－N，N’－diphenyl－1，1’bipheny1－4－4’－diamine（NPB）是空穴传输层（HTL）；9，10－bis（3’5’－diaryl）phenyl anthracene（JBEM）是蓝色发射层；tris（8－quinolinolato）aluminium complex（Alq）是电子传输层（ETL）；DCJT是红色染料。在器件1中得到稳定的且色度不随电流增在而变化的白色发射。它的最大亮度为14850cd/m^2，最大效率2．88lm/W，色度x＝0．31，y＝0．38（从4mA/cm^2到200mA/cm^2），半亮度寿命为2860小时（初始亮度1000cd/m^2）。比较了两种结构的器件，蓝红色发射在同一层结构的器件，在亮度、效率及稳定性上都优于蓝红发射在不同层结构的器件。     

吩基吡啶铍(Bepp2)配合物的高效蓝光器件

高荧光的吩基吡啶铍(Bepp2)作为发射层构成高效蓝色电致发光器件.这一由空穴注入层、空穴传输层、Bepp2发射层组成的多层器件,使用一电子传输层以获得高性能.这种器件结构,最大亮度达6 200cd·m-2、电致发光效率1.3 cd/A(0.71 lm/W),吩基吡啶铍(Bepp2)的电致发光光谱峰值在451 nm.这些初步的结果表明配合物铍应用于电致发光是非常有前景的材料.在化学方面的进一步考察和新的羟苯基吡啶金属配合物电致发光器件的优化也在进行中.     

新型红色磷光铱配合物的合成与电致发光性能

设计并合成了含羟基配体8-苯并噻唑基2-萘酚(HNBT),并以其为辅助配体、2-苯基吡啶(ppy)为第一配体合成了红色磷光铱配合物Ir(ppy)₂(NBT)。采用真空蒸镀的方法,以Ir(ppy)₂(NBT)为发光中心制备了红色有机电致磷光器件,详细研究了配合物Ir(ppy)₂(NBT)的热稳定性、光物理与电致发光性能。值得注意的是,配合物Ir(ppy)₂(NBT)的发射谱图近似于高斯形状,只有一个位于614 nm的发射主峰,没有肩峰出现,且半峰宽仅为65 nm;此外,基于配合物Ir(ppy)₂(NBT)的最佳器件的最大亮度和效率分别是6 400 cd/m²和4.53 cd/A。     

一种新型希夫碱锌配合物的合成及光谱学性质

合成了一种希夫碱有机金属配合物2-羟基-1-萘甲醛缩邻苯二胺合锌(ZnL)。通过质谱、元素分析、红外光谱、热重分析对其结构进行了表征;利用紫外-可见光吸收光谱、激发和发射光谱研究了该配合物的光物理性能。结果表明:ZnL的热分解温度为433.2℃,具有很好的热稳定性;在DMF溶液体系中,配合物ZnL的紫外吸收带位于250~500 nm,荧光激发带位于343~493 nm,在紫外光的激发下发射峰在626 nm处,为橙红色光,最佳激发波长为470 nm,禁带宽度2.32 eV。     

白光和红绿蓝光LED可调光源研制

为了提高LED光源色温和亮度的调节精度和准确度,结合色温由低向高变化时光色所呈现的渐变特点,提出了一种低色温白光LED灯珠、高色温白光LED灯珠加红绿蓝光LED灯珠补偿式调光的方法.将色温分成三个部分进行调节,每个部分选用不同的LED灯珠组合来进行调光.实验结果表明:不同组合情况下的LED光源的初始输出色温相对于目标值的偏差范围在1％以内;亮度可以在保证色温不变的情况下独立进行调节,初始输出值与目标值的偏差范围在1％以内;经过微调之后可以达到目标值;达到了色温和亮度独立调节的要求;光源发光稳定,不会因为长时间工作而影响调节精度.     

Visualization and interferometry for cylindrical and spherical sample tomography and profilometry

A technique combining image processing and laser interferometry for visualizing and detecting the deformation of transparent cylindrical and spherical sample is proposed. This deformation includes geometric deformation such as volume transition in profilometry and physical deformation such as refractive index change in tomography. Phase contour lines are used for quantitative analysis and graphical representation of the deformation. This method allows us to visually detect the spatial variation of the deformation field and to evaluate the test quality such as misalignment of optical system. A theoretical analysis using phase contour map to characterize the deformation field is described in detail. A method using phase contour map to qualify the interferometric test is proposed. Analysis of test examples is carried out. Suggestions on using phase contour line method to ameliorate test system design are finally discussed.     

Quantum and Classical Disparity and Accord

Discrepancies and accords between quantum (QM) and classical mechanics (CM) related to expectation values and periods are generally found for both the harmonic oscillator (SHO) and a free particle in a box (FPB), which may apply generally. These indicate non-locality is expected throughout QM. The FPB energy states violate the Correspondence Principle. Previously unexpected accords are found and proven that 〈x ²〉 _CM =〈x ²〉 _QM and τ _CM =τ _QMb (beat period i.e. beats between the phases for adjoining energy states) for the SHO for all quantum numbers, n. However, for the FPB the beat periods differ at small n. It is shown that a particle’s velocity in an infinite square well varies, no matter how wide the box, nor how far the particle is from the walls. The quantum free particle variances share an indirect commonality with the Aharonov-Bohm and Aharonov-Casher effects in that there is a quantum action in the absence of a force. The concept of an “Expectation Value over a Partial Well Width” is introduced. This paper raises the question as to whether these inconsistencies are undetectable, or can be empirically ascertained. These inherent variances may need to be fixed, or nature is manifestly more non-classical than expected.     

黑克、布劳、及伯曼-温采尔代数的诱导及分导系数和量子经典李代数的耦合与重新耦合系数

本文总结了计算黑克、布劳、及伯曼 温采尔代数在各种工数链下诱导及分导系数的线性方程方法(LEM)。特别强调了关于A,B,C,D型李代数及其量子情形与其中心代数之间的舒尔 魏尔 布劳双关性关系。这一关系使我们能够利用相应中心代数的诱导及分导系数计算出经典李代数及其量子情形的耦合与重新耦合系数。讨论了从该方法得到B,C,D型李代数不可约表示克罗内克积分解的应用。基于LEM还得到了处理对应于置换群CG系列问题的黑克代数张量积的方法。     

Spectroscopy and Photophysics of Iso- and Alloxazines: Experimental and Theoretical Study

We present a systematic study of the effect of methyl substitution on iso- and alloxazines in acetonitrile solutions. Substitution patterns have profound effects on both spectral and photophysical properties, with fluorescence quantum yields varying by more than an order of magnitude. TD-DFT calculation were used for the first time to correlate electronic structure changes with the substitution patterns, with good agreement between calculated and theoretical band positions and oscillator strengths. Both n-pi* and pi-pi* states in these compounds are predicted, with the oscillator strengths indicating that only the pi-pi* states should be observable in the absorption spectra. Substitution patterns are shown to be responsible for energy order inversion between these states.     

国外超导材料技术研究政策和方向

超导材料技术是21世纪具有战略意义的高新技术,极具发展潜力和市场前景。世界各发达国家纷纷制定研发计划,给予高度重视和大力支持,加快超导材料技术的基础研究和产业化发展。主要从美国、日本、欧洲国家、韩国等国家的相关研发计划、政策以及主要科研机构的研发概况出发,阐明目前国外超导材料技术的研究政策和方向。     

Geometry and Elasticity of Strips and Flowers

We solve several problems that involve imposing metrics on surfaces. The problem of a strip with a linear metric gradient is formulated in terms of a Lagrangian similar to those used for spin systems. We are able to show that the low energy state of long strips is a twisted helical state like a telephone cord. We then extend the techniques used in this solution to two–dimensional sheets with more general metrics. We find evolution equations and show that when they are not singular, a surface is determined by knowledge of its metric, and the shape of the surface along one line. Finally, we provide numerical evidence by minimizing a suitable energy functional that once these evolution equations become singular, either the surface is not differentiable, or else the metric deviates from the target metric.     

Rapid and flexible laser marking and engraving of tilted and curved surfaces

We present a novel method for rapid and flexible laser marking and engraving of tilted, curved and freeform work-piece surfaces. The method is based on integrating a three-dimensional (3D) laser measurement system into a 3D laser marking system. We use the same laser source and optics for measurement and processing with a minimum of additional hardware components. A low power CW laser regime is used to measure the 3D shape of a work-piece surface while a high-peak power-pulsed laser regime is used for processing. The acquired 3D surface data are used to determine the 3D trajectory of the processing beam focus. Neither the 3D shape of the work-piece nor its orientation needs to be known in advance as long as the processed surface lies within the working range of the 3D laser processing system. This eliminates the need for exact work-piece positioning before processing and substantially improves processing flexibility (allowing, e.g. variations in work-piece shape or/and orientation from mark to mark). This paper discusses key issues concerning an implementation of the method and presents typical examples of markings and engravings, which demonstrate the advantages of the method with respect to the existing industrial 2D and 3D laser marking and engraving methods. The method can also be applied to flexible laser structuring and microprocessing of curved surfaces.     

激光与计量基准

激光以它的良好的物理性质（单色性好、方向性强、能量大等）而被广泛应用到科学与技术许多领域。激光应用于计量科学和利用激光变更计量基本单位的定义和复现其定。都为计量科学的发展起到革命性的作用，文章介绍了激光与米定义及其复现，激光与秒定义，激光与国际温标，激光与质量自然基准和一系列激光在计量测试中的应用。