Effect of Single and Dual Hydrothermal Treatments on the Resistant Starch Content and Physicochemical Properties of Lotus Rhizome Starches

Heat-moisture treatment (HMT) changed the morphology and the degree of molecular ordering in lotus rhizome (Nelumbo nucifera Gaertn.) starch granules slightly, leading to some detectable cavities or holes near hilum, weaker birefringence and granule agglomeration, accompanied with modified XRD pattern from C- to A-type starch and lower relative crystallinity, particularly for high moisture HMT modification. In contrast, annealing (ANN) showed less impact on granule morphology, XRD pattern and relative crystallinity. All hydrothermal treatment decreased the resistant starch (from about 27.7–35.4% to 2.7–20%), increased the damage starch (from about 0.5–1.6% to 2.4–23.6%) and modified the functional and pasting properties of lotus rhizome starch pronouncedly. An increase in gelatinization temperature but a decrease in transition enthalpy occurred after hydrothermal modification, particularly for hydrothermal modification involved with HMT. HMT-modified starch also showed higher pasting temperature, less pronounced peak viscosity, leading to less significant thixotropic behavior and retrogradation during pasting-gelation process. However, single ANN treatment imparts a higher tendency of retrogradation as compared to native starch. For dual hydrothermally modified samples, the functional properties generally resembled to the behavior of single HMT-modified samples, indicating the pre- or post-ANN modification had less impact on the properties HMT modified lotus rhizome starch.     

An insight into tapioca and wheat starch gelatinization mechanisms using TD-NMR and complementary techniques

To provide evidence for previously proposed assumptions concerning starch gelatinization sub-mechanisms, a more detailed investigation was carried out using multiscale analysis of a starch type selected for its marked difference. Tapioca starch was chosen due to its cohesive/springy properties and its growing use in the food industry. Time-domain nuclear magnetic resonance (TD-NMR) was used to investigate the leaching of material, water absorption and crystallite melting in hydrated tapioca starch (45%). The interpretation of T2 mass intensity evolutions, especially those of the (intra- and extra-granular) aqueous phases, was discussed drawing on complementary techniques such as microscopy, Rapid Visco Analyser (RVA), differential scanning calorimetry (DSC) and swelling factor (SF) and solubility index (SI) measurements. Results show that the T2 assignments usually proposed in the literature are dependent on starch origin. The differences in T2 evolutions (value and mass intensity) observed between wheat and tapioca starches at intermediate hydration levels could be linked to the different gelatinization behaviour of tapioca starch involving the latter's higher granule rupture level, higher gelatinization temperature and greater swelling power above its gelatinization temperature.     

New Type of Food Processing Material: The Crystal Structure and Functional Properties of Waxy and Non-Waxy Proso Millet Resistant Starches

Resistant starch (RS) is widely used in the food industry because of its ability to regulate and protect the small intestine, but their distinct effects on the structural and functional properties of waxy and non-waxy proso millet starches are not completely understood. The crystalline structure and physicochemical properties of waxy and non-waxy proso millets’ starch samples were analyzed after heat-moisture treatment (HMT). The analysis revealed significant differences between the RS of waxy and non-waxy proso millets. The crystal type of proso millets’ starch changed from type A to type B + V. The relative crystallinity of the RS of waxy proso millet was better than that of non-waxy proso millet. The gelatinization temperature and thermal stability of RS significantly increased, and the pasting temperature (PTM) of the RS of waxy proso millet was the highest. The water solubility and swelling power of the RS in proso millet decreased, and the viscoelasticity improved. The correlation between the short-range ordered structure of RS and ΔH, and gelatinization properties has a stronger correlation. This study provides practical information for improving the nutritional benefits of waxy and non-waxy proso millet in food applications.     

Structure and Processing Properties of Nine Yam (Dioscorea opposita Thunb) Starches from South China: A Comparison Study

In order to explore the processing and application potential of Chinese yam starch, nine kinds of Chinese yam starch (GY11, GY5, GY2, GXPY, LCY, SFY, MPY, SYPY, ASY) from South China were collected and characterized. The chemical composition, rheological properties, thermal properties, and in vitro starch digestion were compared, and the correlation between the structure and processing properties of these yam starches was analyzed using Pearson correlation. The results show that GY2 had the highest amylose content of 28.70%. All the yam starches were similarly elliptical, and all the yam starch gels showed pseudoplastic behavior. Yam starches showed similar pasting temperatures and resistant starch content, but SYPY showed the largest particle size (28.4 μm), SFY showed the highest setback (2712.33 cp), and LCY showed the highest peak viscosity (6145.67 cp) and breakdown (2672.33 cp). In addition, these yam starches also showed different crystal types (A-type, B-type, C-type), relative crystallinity (26.54–31.48%), the ratios of 1045/1022 cm⁻¹ (0.836–1.213), pasting properties, and rheological properties, so the yam starches have different application potentials. The rheological and pasting properties were related to the structural properties of starch, such as DI, Mw, and particle size, and were also closely related to the thermodynamic properties. The appropriate processing methods and purposes of the processed products of these yam starches can be selected according to their characteristics.     

Effects of Variety and Growing Location on Physicochemical Properties of Starch from Sweet Potato Root Tuber

Three sweet potato varieties with purple-, yellow-, and white-fleshed root tubers were planted in four growing locations. Starches were isolated from their root tubers, their physicochemical properties (size, iodine absorption, amylose content, crystalline structure, ordered degree, lamellar thickness, swelling power, water solubility, and pasting, thermal and digestion properties) were determined to investigate the effects of variety and growing location on starch properties in sweet potato. The results showed that granule size (D[4,3]) ranged from 12.1 to 18.2 μm, the iodine absorption parameters varied from 0.260 to 0.361 for OD620, from 0.243 to 0.326 for OD680 and from 1.128 to 1.252 for OD620/550, and amylose content varied from 16.4% to 21.2% among starches from three varieties and four growing locations. Starches exhibited C-type X-ray diffraction patterns, and had ordered degrees from 0.634 to 0.726 and lamellar thicknesses from 9.72 to 10.21 nm. Starches had significantly different swelling powers, water solubilities, pasting viscosities, and thermal properties. Native starches had rapidly digestible starch (RDS) from 2.2% to 10.9% and resistant starch (RS) from 58.2% to 89.1%, and gelatinized starches had RDS from 70.5% to 81.4% and RS from 10.8% to 23.3%. Two-way ANOVA analysis showed that starch physicochemical properties were affected significantly by variety, growing location, and their interaction in sweet potato.     

Influence of Surface-Active Compounds on Starch Dispersion in Water. Part I. Starch Pasting

The influence of native lipids and additives of surface-active compounds on starch paste rheology was investigated. The aim of the study was to gain better understanding of mechanisms involved in starch gelatinization and how these structure changes of granules later affect rheological properties of pastes and gels. Starches from three main sources—potato, maize, and wheat—were tested; sodium dodecylsulfate, oleate, and benzalkonium chloride were employed as additives. Starch pasting was examined by a rheometer to get a viscosity profile, also pastes were analyzed by differential scanning calorimetry, for particle size using a light scattering technique. Results revealed that there was a competition between native lipids and added surfactants for amylose complexation. Complexes formed during gelatinization were strongly affecting granule swelling and dissolution of starch polymers, and viscosity of pastes was mainly dependent on the particle size of a disperse phase in the paste. Addition of strong ionic surfactants to cereal starches resulted in smaller granular remnants and, therefore, decreased viscosity, while the weak anionic surfactant promoted an increase in the particle size and paste viscosity for both cereal and tuber starches. The mechanism of the effect of surfactants on the particle size in pastes is discussed.     

Effect of Cactus (Opuntia ficus-indica) and Acacia (Acacia seyal) Gums on the Pasting,Thermal, Textural,and Rheological Properties of Corn,Sweet Potato,and Turkish Bean Starches

This study was planned to explore the locally available natural sources of gum hydrocolloids as a natural modifier of different starch properties. Corn (CS), sweet potato (SPS), and Turkish bean (TBS) starches were mixed with locally extracted native or acetylated cactus (CG) and acacia (AG) gums at 2 and 5% replacement levels. The binary mixtures (starch–gums) were prepared in water, freeze dried, ground to powder, and stored airtight. A rapid viscoanalyzer (RVA), differential scanning calorimeter (DSC), texture analyzer, and dynamic rheometer were used to explore their pasting, thermal, textural, and rheological properties. The presence of acetylated AG or CG increased the final viscosity (FV) in all three starches when compared to starch pastes containing native gums. Plain SPS dispersion had a higher pasting temperature (PT) than CS and TBS. The addition of AG or CG increased the PT of CS, SPS, and TBS. The thermograms revealed the overall enthalpy change of the starch and gum blends: TBS > SPS > CS. The peak temperature (T_p) of starches increased with increasing gum concentration from 2 to 5% for both AG and CG native and modified gums. When compared to the control gels, the addition of 2% CG, either native or modified, reduced the syneresis of starch gels. However, further addition (5% CG) increased the gels’ syneresis. Furthermore, the syneresis for the first cycle on the fourth day was higher than the second cycle on the eighth day for all starches. The addition of native and acetylated CG reduced the hardness of starch gels at all concentrations tested. All of the starch dispersions had higher G′ than G″ values, indicating that they were more elastic and less viscous with or without the gums. The apparent viscosity of all starch gels decreased as shear was increased, with profiles indicating time-dependent thixotropic behavior. All of the starch gels, with or without gums, showed a non-Newtonian shear thinning trend in the shear stress vs. shear rate graphs. The addition of acetylated CG gum to CS resulted in a higher activation energy (Ea) than the native counterparts and the control. More specifically, starch gels with a higher gum concentration (5%) provided greater Ea than their native counterparts.     

Sizes,Components, Crystalline Structure,and Thermal Properties of Starches from Sweet Potato Varieties Originating from Different Countries

Sweet potato is a root tuber crop and an important starch source. There are hundreds of sweet potato varieties planted widely in the world. Starches from varieties with different genotype types and originating from different countries have not been compared for their physicochemical properties. In the research, starches from 44 sweet potato varieties originating from 15 countries but planted in the same growing conditions were investigated for their physicochemical properties to reveal the similarities and differences in varieties. The results showed that the 44 starches had granule size (D[4,3]) from 8.01 to 15.30 μm. Starches had different iodine absorption properties with OD680 from 0.259 to 0.382 and OD620/550 from 1.142 to 1.237. The 44 starches had apparent amylose content from 19.2% to 29.2% and true amylose content from 14.2% to 20.2%. The starches exhibited A-, C_A-, C_C-, or C_B-type X-ray diffraction patterns. The thermograms of 44 starches exhibited one-, two-, or three-peak curves, leading to a significantly different gelatinization temperature range from 13.1 to 29.2 °C. The significantly different starch properties divide the 44 sweet potato varieties into different groups due to their different genotype backgrounds. The research offers references for the utilization of sweet potato germplasm.     

Physicochemical,Structural, Thermal and Rheological Properties of Flour and Starch Isolated from Avocado Seeds of Landrace and Hass Cultivars

The objective of this study was to obtain and characterize flours and starches from the avocado seeds of Hass and landrace cultivars. The morphological, physical-chemical, structural, thermal and rheological characteristics were evaluated. The flour yield of the Hass and landrace cultivars was 41.56 to 46.86% (w/w), while for starch, it was 35.47 to 39.57% (w/w) (cv. Hass and landrace, respectively). Scanning electron microscopy (SEM) revealed the presence of oval starch granules and other particles in flour, in contrast to flours, starches showed lower ash, proteins and lipids content. However, the amylose content was higher in starches (42.25–48.2%). Flours showed a higher gelatinization temperature (T_p = 73.17–73.62 °C), and their starches presented greater gelatinization enthalpy (∆H_gel = 11.82–13.43 J/g). All samples showed a B-type diffraction pattern, and the crystallinity was higher in the flours. The rheological analysis (flow curves and viscoelastic tests) evidenced a pseudoplastic (n = 0.28–0.36) behavior in all samples analyzed, but the consistency index (k) was higher in starches. In general, the flours and starches from avocado seeds presented interesting proximal, thermal and functional properties for possible application in food systems, and these findings could contribute to the revaluation of this by-product.     

Comparison of A and B starch granules from three wheat varieties

Three starches from the wheat varieties AK58, ZM18 and YZ4110 were separated into large (A) and small (B) granules, which were characterized structurally and evaluated for their functional properties. SEM results showed that the size of A-granules from ZM18 and YZ4110 were about the same, but the sizes of A-granules and B-granules from AK58 were larger than those of ZM18 and YZ4110. FTIR spectra showed that all the samples exhibited a similar pattern, with seven main modes with maximum absorbance peaks near 3,500, 3,000, 1,600, 1,400, 1,000, 800, 500 cm-1. The B-granules of ZM18 and YZ4110 had less amylose content, although the difference among the total amylose contents of the three unfractionated starches was not significant. X-ray diffraction (XRD) patterns showed predominantly A-type crystallinity for all the starches. The A-granules showed sharper XRD patterns than the other starches. DSC analysis showed that the A-granules had broader ranges of gelatinization temperatures than the B-granules from the same wheat variety. The gelatinization enthalpy (ΔH) of A-granules was higher than that of B-granules. AK58 exhibited the smallest enthalpy, while ZM18 showed the largest enthalpy. In pasting tests, the A-granule starch of AK58 had higher peak, final and setback viscosity, lower breakdown and pasting temperature, and the B-granule starch and unfractionated starch of AK58 had lower peak, breakdown, final and setback viscosity and higher pasting temperature than ZM18 and YZ4110.     

Hydrolysis of Native and Heat-Treated Starches at Sub-Gelatinization Temperature Using Granular Starch Hydrolyzing Enzyme

The effect of heat treatment below the gelatinization temperature on the susceptibility of corn, mung bean, sago, and potato starches towards granular starch hydrolysis (35°C) was investigated. Starches were hydrolyzed in granular state and after heat treatment (50°C for 30 min) by using granular starch hydrolyzing enzyme for 24 h. Hydrolyzed heat-treated starches showed a significant increase in the percentage of dextrose equivalent compared to native starches, respectively, with corn 53% to 56%, mung bean 36% to 47%, sago 15% to 26%, and potato 12% to 15%. Scanning electron microscopy micrographs showed the presence of more porous granules and surface erosion in heat-treated starch compared to native starch. X-ray analysis showed no changes but with sharper peaks for all the starches, suggested that hydrolysis occurred on the amorphous region. The amylose content and swelling power of heat-treated starches was markedly altered after hydrolysis. Evidently, this enzyme was able to hydrolyze granular starches and heat treatment before hydrolysis significantly increased the degree of hydrolysis.     

Properties of Ozone-Oxidized Tapioca Starch and Its Use in Coating of Fried Peanuts

Oxidation of tapioca via ozone oxidation was carried out under different conditions in comparison with H₂O₂. The impact of ozonation on physicochemical properties of tapioca was studied and fried peanuts coated with different tapioca were characterized. Different ozone oxidation times (10, 20, and 30 min) and various pH values (5, 7, and 9) were used for tapioca modification. Tapioca oxidized by ozone for 20 min at pH 7 had higher swelling power (SP), water holding capacity (WHC), oil holding capacity (OHC), and viscosity than the native counterpart (P < 0.05). This coincided with the higher carbonyl and carboxyl contents (P < 0.05). The highest frying expansion (FE) with the lowest hardness was attained for fried peanut coated with tapioca oxidized under the aforementioned condition. Therefore, oxidation of tapioca using ozone under optimal conditions could be a potential means to improve frying expansion as well as the crispiness of the fried coated peanuts.     

用酶分解法研究淀粉糊化

本文用酶分解法对土豆、甘薯和玉米三种淀粉,在不同条件下的糊化作了研究。得出了三种淀粉开始和完全糊化的温度和时间;测定了糊化反应的动力学,并从糊化温度与反应速度常数的关系,计算了各种淀粉糊化的活化能,还根据Vant Hoff公式计算了三种淀粉糊化的有效热焓变化。     

Evaluation of black tea polyphenol extract against the retrogradation of starches from various plant sources

The effects of black tea polyphenol extract (BTPE) on the retrogradation of starches from different plant sources were studied using differential scanning calorimetry (DSC) and X-ray diffraction (XRD). DSC analysis shows that the gelatinization temperature of maize starch and starches from different rice varieties increased with increasing BTPE level. After storage at 4 °C, BTPE at a concentration of 15% markedly retarded the retrogradation of maize starch and starches from different rice varieties. Native maize starch and starches from different rice varieties showed typical A-type X-ray diffraction patterns, while native potato starch showed a typical B-type X-ray diffraction pattern. Adding BTPE significantly affected the crystalline region and intensities of X-ray diffraction peaks of maize and rice starch granules. It is concluded that adding BTPE markedly inhibits the retrogradation of maize starch and starches from different rice varieties, but has no significant influence on the gelatinization and retrogradation characteristics of potato starch.     

Preparation and flocculating properties of highly substituted cationic starches of different vegetable origins

Kinetic regularities of flocculation of model kaolin suspensions by highly substituted cationic flocculants synthesized from different starches (corn, waxy corn, potato, and tapioca starches) have been studied as depending on the doses and vegetable origins of the flocculants. The rate of kaolin suspension flocculation has been found to increase with the dose of the cationic starches of all types. It has been shown that, irrespective of the dose, the highest rate of kaolin sedimentation in the model systems is observed in the presence of cationic potato starch. It has been demonstrated that cationic potato starch flocculates kaolin suspensions with concentrations of 0.1, 0.5, and 1.0% with the same efficiency. In this case, the suspensions are almost completely clarified within 2–5 min. Moreover, the dependence of the flocculating efficiency for a 0.1% model suspension on the dose of cationic starch has been found to pass through a maximum at a starch content of 1.0–5.0 mg/g of kaolin depending on the type of starch.     

Functional Properties of Banana Starch (Musa spp.) and Its Utilization in Cosmetics

Unripe banana fruit of Musa acuminata (Musa AAA; Hom Khieo) and Musa sapientum L. (Musa ABB; Namwa) growing in Chiang Rai (Thailand) were used for extraction. The yield of the starches was 16.88% for Hom Khieo (HK) and 22.73% for Namwa (NW) based on unripe peeled banana fruit. The amylose contents of HK and NW were 24.99% and 26.23%, respectively. The morphology of starch granules was oval shape with elongated forms for large granules and round shape for small granules. The HK and NW showed B-type crystalline structure and the crystallinities were 23.54% and 26.83%, respectively. The peak temperature of gelatinization was around 77 °C and the enthalpy change (ΔH) was 3.05 and 7.76 J/g, respectively. The HK and NW banana starches showed 1.27 ± 0.12 g/g and 1.53 ± 0.12 g/g water absorption capacity, and 1.22 ± 0.11 g/g and 1.16 ± 0.12 g/g oil absorption capacity, respectively. The swelling power of the banana starches was 17.23 ± 0.94 g/g and 15.90 ± 0.15 g/g, respectively, and the percentage of solubility in water showed 26.43 ± 2.50 g/g and 20.54 ± 0.94 g/g, respectively. The banana starches showed very poor flow character. The HK and NW starches have the potential to be used in powder base preparations with no effect on the sensory texture of the product at 15% w/w maximum.     

Effects of NaOH treatment of cereal starch granules on the extent of granular starch hydrolysis

Effect of NaOH treatment on granular hydrolysis of cereal starches was studied and granular starch hydrolyzing enzyme is used to hydrolyze native and NaOH-treated starch for 24?h. The dextrose equivalent value of NaOH-treated starch increased significantly compared to native starch, i.e., 28–38?% for corn, 7–37?% for rice, but no significant increase for corn starch. Scanning electron microscopy micrographs showed that NaOH treatment caused an enlargement of pores and degrades the surface of starch granules. Hydrolyzed-treated starch exhibited rougher surface and more porous granules compared to native starch. The swelling power and pasting properties of NaOH-treated starches were markedly altered after hydrolysis. X-ray pattern of all starches showed no changes and the amylose content decrease significantly after hydrolysis, which could due to extensive degradation of amorphous region. Evidently, NaOH treatment below gelatinization temperature was effective in enhancing the degree of granular starch hydrolysis.     

Thermal, rheological, and structural behaviors of natural and modified cassava starch granules, with sodium hypochlorite solutions

The use of chemically modified starches is widely accepted in various industries, with several applications. In this research, natural cassava starch granules were treated with standard sodium hypochlorite solution at 0.8, 2.0, and 5.0 g Cl/100 g starch. The native and modified starch samples were investigated by means of the following techniques: simultaneous thermogravimetry–differential thermal analysis, which allowed us to verify the thermal decomposition associated with endothermic or exothermic phenomena; and differential scanning calorimetry that was used to determine gelatinization enthalpy as well as the rapid viscoamylographic analysis that provided the pasting temperature and viscosity. By means of non-contact-atomic force microscopy method and X-ray powder patterns diffractometry, it was possible to observe the surface morphology, topography of starch granules, and alterations in the granules’ crystallinity.     

半夏淀粉的理化特性

研究了不同产地的4种半夏淀粉的理化特性,包括直链淀粉含量、膨胀度、溶解性、持水性、淀粉粒大小和形貌、结晶类型、热特性和糊化特性等。结果表明,这些半夏淀粉中直链淀粉含量为18.60%～23.91%;膨胀度21.53%～23.09%;溶解度11.5%～32.3%;持水性100.3%～119.0%。淀粉粒单粒球形,卵形或圆半球形,直径2～20μm,复粒由2～3个分粒组成,其结晶类型均为C型,结晶度15.0%～37.9%。用差示扫描量热仪测得的转变温度TO、TP和TC分别为71.58～77.75℃、83.03～83.84℃和89.41～90.99℃,热焓为4.316～5.809 J/g。用快速粘度分析仪测定了4种半夏淀粉的糊化特征值:峰值粘度、热糊粘度、冷糊粘度、稀懈值和回复值分别为149.5～226.2、97.7～127.2、141.8～194.3、50.4～99.0和44.2～67.2 RVU。糊化温度77.8～79.9℃,峰值时间8.3～8.7 min。     

Structural, physico-chemical, thermal and pasting properties of potato (Solanum tuberosum L.) flour

In this work, two varieties of potato flour (Ágata and IAPAR Cristina) were studied by simultaneous thermogravimetry–differential thermal analysis (TG–DTA), differential scanning calorimetry (DSC), rapid viscoamylographic analysis (RVA), and microscopy (NC-AFM) that were compared with conventional physico-chemical analysis, according different granulometry of each flour. Flours of IAPAR Cristina showed higher levels of starch, fiber, and phosphate and it showed higher thermal stability (TG–DTA), as well as higher pasting temperature and viscosity (RVA), and lower enthalpy of gelatinization (DSC) in the two granulometries. Flours of Agata showed higher gelatinization enthalpy (DSC) and lower pasting temperature (RVA). Atomic force microscopy—non contact method (NC-AFM), was important to check for protrusions and pores of the flour surfaces. The differences between cultivars can be attributed mainly to the genotypes and growth conditions of the tubers, which can modify the flour properties.