无因次参数对新型分离结晶法制备CdZnTe晶体的影响

本文借助有限差分法对新型分离结晶法生长CdZnTe晶体过程中熔体内部的热毛细对流进行了三维数值模拟，获得了Marangoni数、高径比及狭缝宽度等无因次参数对流动的影响。结果表明：当Marangoni数较小时，流动为稳态流动，传热以导热为主，当Marangoni数超过一定数值后，流动发展为非稳态热毛细对流，对流的影响加...     

分离结晶Bridgman法晶体生长过程的影响因素

本文采用全局数值模拟方法探讨了微重力条件下温度梯度对分离结晶Bridgman法晶体生长系统的作用规律。同时,在常重力条件下研究了坩埚半径对晶体生长系统的影响。结果发现,在微重力条件下随着温度梯度的增加,晶体生长系统内部的流动强度随之增加,且由于晶体生长系统低温区温度不断降低,使得结晶界面位置不断上升;在常重力条件下,重力的作用随着坩埚半径的增加而增强,导致晶体生长系统内部的流动强度增加,最大流函数增大。     

分离结晶过程中熔体热毛细对流的转变

为了了解微重力条件下新型分离结晶生长过程中熔体热毛细对流的基本特征,利用有限差分法进行了数值模拟,熔体深径比A取1和2,自由界面无因次宽度B分别取0.05、0.075和0.1.当熔体上表面为自由表面时,得到了分离结晶Bridgman生长过程中熔体热毛细对流的流函数和温度分布.计算结果表明:当Ma数较小时,在上下两个自由表面的表面张力的驱动下,熔体内部产生了两个流动方向相反的流胞,流动为稳态流动,随着Ma数的增加,上下自由表面速度增大,温度分布的非线性增加;当Ma数超过某一临界值后,流动将转化为非稳态流动;与熔体上表面为固壁时相比,A=1时的临界Ma数减小,而A=2时的临界Ma数增大;流动失稳的物理机制是流速的变化和阻力的变化之间存在滞后.     

C60／C70晶体形貌的研究

采用电孤法制备了Ｃ６０／Ｃ７０，并用光学显微镜、扫描电子显微镜和透射电子显微镜对其结晶形貌进行了研究。研究结果表明，Ｃ６０／Ｃ７０晶体依平面状长大方式生长，最母长成规则的四边形，五边形和六边形晶体。     

勾形磁场对分离结晶法制备CdZnTe晶体的影响

为了了解勾形磁场对CdZnTe晶体生长质量的影响,利用有限元法对坩埚内的热量和动量传递过程进行了全局数值模拟。假定熔体和气相中的流动都为准稳态轴对称层流,研究了B_o(磁场轴线与晶体-坩埚界面的交点的磁场强度的轴向分量)为0 T,0.5 T,1.0 T,1.5 T,2.0 T,2.5 T,3.0 T时的CdZnTe晶体生长过程。结果表明:勾形磁场能有效抑制熔体内的流动,会产生由洛仑兹力、表面张力和浮力共同驱动的涡胞。随着磁场强度的增加,传热向导热型转变,熔体内最大流函数逐渐减小,抑制作用增强。     

写入光偏振态对Ce:KNSBN晶体衍射特性的影响

采用非同时读出条件下晶体两波耦合实验装置,以单束光入射Ce:KNSBN光折变晶体,通过改变抽运光偏振方向和品体c轴的夹角φ.系统记录了不同φ角下的抽运光透射光强I',随时间的变化情况.实验结果表明,当φ≤30°时,基本没有光扇效应;实验研究了正交偏振光写入下Ce:KNSBN晶体的两波耦合动态过程,并与e光写入下两波耦合动态过程进行了比较,发现正交偏振光写入时光扇噪声得到了明显抑制,在相同的写入参量条件下光栅的衍射效率明显提高.     

倍频及参量过程中的相位匹配角折返现象

许多非线性光学晶体在倍频及参量过程中的相位匹配角折返现象目前已由中国科学院物理研究所通过计算得到证实,并由基于经典光学的理论成功地解释了该现象的普遍性,得出倍频及参量过程中的相位匹配角折返现象广泛存在于一类和二类匹配的单轴及双轴晶体中的重要结论. 非线性光学晶体的相位匹配角折返现象是一种十分有趣且具有应用前景的新现象.倍频过程中的相位匹配角折返现象是指当晶体处于某一角度时,存在两个(或两个以上)不同频率的相干光同时倍频相位匹配.参量过程中的相位匹配角折返现象是指当泵浦光频率及晶体角度处在某一范围时,存在两…     

非对称半结晶两嵌段共聚物的微相分离与结晶行为的模拟退火研究

利用模拟退火方法研究非对称半结晶两嵌段共聚物熔体分别在弱分离和强分离条件下的结晶过程.考察微相分离作用和结晶作用的相对强度对柱状组成的两嵌段共聚物平衡形态的影响.研究结果表明,当嵌段间的相互排斥作用较弱时,结晶便破坏了柱状畴;当此相互作用足够强时,结晶过程可以有效地被限制在熔体微相分离所形成的柱状畴内.另外,介于上述两种情形之间还存在一个模板区域,此时熔体形成的柱状畴大部分被保留下来,但在局部会变形或连通.这些结果和文献报道的实验结果一致.当嵌段间的相互排斥作用非常强时,结晶被抑制,微相分离主导最终形态,观察到了非晶态结构.     

GaAs晶体在不同应变下生长过程的分子动力学模拟

GaAs晶体的高质量生长对于制造高性能高频微波电子器件和发光器件具有重要意义.本文通过分子动力学方法对GaAs晶体沿[110]晶向的诱导结晶进行模拟,并采用最大标准团簇分析、双体分布函数和可视化等方法研究应变对生长过程和缺陷形成的影响.结果表明,不同应变条件下GaAs晶体的结晶过程发生显著变化.在初始阶段,施加一定拉应变和较大的压应变后,体系的晶体生长速率发生降低,且应变越大,结晶速率越低.此外,随着晶体的生长,体系形成以{111}小平面为边界的锯齿形界面,生长平面与{111}小平面之间的夹角影响固液界面的形态,进而影响孪晶的形成.施加拉应变越大,此夹角越小,形成孪晶缺陷越多,结构越不规则.同时,体系中极大部分的位错与孪晶存在伴生关系,应变的施加可以抑制或促进位错的形核,合适的应变甚至可以使晶体无位错生长.本文从原子尺度上研究GaAs的微观结构演化,可为晶体生长理论提供理论指导.     

低对称性非线性光学晶体BIBO的倍频性质

测量了BIBO晶体的主轴折射率.对BIBO晶体在整个空间内的倍频性质进行了系统讨论.当基频 光为Nd:YAG激光时（λ=1064nm），发现最大的有效非线性光学系数位于（168.9°，90°） 的Ⅰ类相位匹配方向上.测量了BIBO晶体的容限角、容限温度、光损伤阈值，以及1064nm的 腔外、腔内倍频性质.实验中，最大腔外倍频转换效率达到68%，腔内倍频输出达到1.06W. 关键词： 低对称性 BIBO晶体 倍频     

Hybrid Wavelength and Code Division Multiple Access in Optical Networks

A review of schemes for multiple access in fiber optic networks shows that a hybrid of wavelength and code division multiple access (WCDMA) combines the best features of both. In particular, the hybrid scheme retains the large information carrying capacity of wavelength division multiple access (WDMA) and flexibility of code division multiple access (CDMA). In this paper WDMA, optical CDMA (OCDMA), and WCDMA networks are discussed. In OCDMA networks, concept of incoherent and coherent coding including inverse decoding and matched filter is introduced. The delay performance of both WDMA and WCDMA networks, under the simple suboptimum access protocols based on cyclic search, is computed. It has been shown quantitatively that tuning delay significantly affects the delay performance of both WDMA and WCDMA networks. Futhermore, delay performance of WCDMA networks is always better than the WDMA networks for the same tuning delay, load, and number of users.     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Research on beamforming method for dual-line array with space mismatch between the two line arrays

The performance of port/starboard discrimination of dual-line array will be seriously degraded when the space between the two line arrays of the dual-line array is mismatched. The directivity function of the delay-sum and delay-subtract beamforming is deduced and the port/starboard discrimination of the delay-sum and delay-subtract beamforming is also studied both under the ideal status and the status under which the space between the two line arrays of the dual-line array is mismatched. Analysis results show the delay-subtract beamforming has better performance of port/starboard discrimination. At last, the sea trial results demonstrate the theoretical results.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Retrieval of ultraviolet skylight radiances and O3 slant column densities from balloon-borne limb spectrometer

With a novel light-weight and absolutely calibrated ultraviolet （UV） spectrometer, UV skylight radiances and O3 slant column densities are measured by balloon-borne limb measurements in Xinjiang area, China. UV skylight radiances measured at the height of 31 km are compared with the results from Modtran in the wavelength range from 290 to 420 nm. O3 slant column densities are derived from radiance spectra in the Huggins bands （320 - 335 nm） using differential optical absorption spectroscopy method. And the parameter exhibits a good correlation with the same value simulated by radiative transfer model （Tracy）. The O3 profile simultaneously measured by an O3 sonde is used as input in Tracy calculations. The O3 sonde is launched on the same balloon.     

Design optimization of highly sensitive LSPR enhanced surface plasmon resonance biosensors with nanoholes

For breaking through the sensitivity limitation of conventional surface plasmon resonance (SPR) biosensors, novel highly sensitive SPR biosensors with Au nanoparticles and nanogratings enhancement have been proposed recently.But in practice, these structures have obvious disadvantages.In this study, a nanohole based sensitivity enhancement SPR biosensor is proposed and the influence of different structural parameters on the performance is investigated by using rigorous coupled wave analysis (RCWA).Electromagnetic field distributions around the nanohole are also given out to directly explain the performance difference for various structural parameters.The results indicate that significant sensitivity increase is associated with localized surface plasmons (LSPs) excitation mediated by nanoholes.Except to outcome the weakness of other LSP based biosensors, larger resonance angle shift, reflectance amplitude, and sharper SPR curves' width are obtained simultaneously under optimized structural parameters.     

Polymer gratings based on photopolymerization for low-order distributed feedback polymer lasers

Novel polymer distributed feedback(DFB)gratings are fabricated based on photopolymerization to reduce lasing threshold of polymer lasers.A photopolymer formulation sensitive to 355-nm ultraviolet(UV)light is proposed for the fabrication of polymer gratings and it can be used to form polymer films by spin-coating process.A very low surface-relief depth ranging from 12.5 to about 1.0 nm has been demonstrated with a refractive-index modulation of about 0.012.The experimental results indicate that such polymer gratings have promising potentials for the fabrication of low-order DFB organic semiconductor lasers.     

A novel methodology for photometric compensation of projection display on patterned screen

We propose a novel methodology based on the projector-camera (ProCam) system to address the photometric compensation issue for the projection display on the patterned screen.The patterned screen is treated as the combination of a perfect white screen and a color modulator.The perfect white screen is used to automatically and accurately characterize the ProCam system offline using the polynomial model,and the parameters of the color modulator can be efficiently recovered by employing only two gray images based on the linear reflectance model.The experimental results show that the color artifacts of the display image can be greatly improved with this methodology,which demonstrates its feasibility and validity in the photometric compensation.