Determination of phosphorus traces in platinum alloys by two-phase isotope exchange

The method of ZEMAN and KRATZER for the determination of phosphorus traces by means of two-phase isotope exchange was modified for the determination of phosphorus in pure platinum or pure platinum alloys. It was found that Pt, Rh, Ag, and As do not interfere with the determination. Among the elements usually present in platinum metal or platinum alloys, only gold interferes. It was removed by extraction from 7M HCl by MIBK and AmOAc. Hydrochloric acid also interferes but it can be removed by evaporation. The analytical procedure is given for the solution obtained by pressure decomposition of the sample (0.5 g) in a steel bomb with PTFE inlay. It is possible to determine >2 ppm P (approximate error −10%). Using a calibration dependence instead of the well known equation for isotope exchange, the content of P in the standard solution labelled with³²P need not be known.     

Direct determination of selenium in a wild fruit juice by electrothermal atomic absorption spectrometry

A matrix modifier composed of platinum and nickel is proposed for the determination of selenium in a wild fruit juice made from Lantingguo (Vuccinium uliginosam). Five matrix modifiers (copper/nickel, palladium/magnesium, platinum/magnesium, platinum/nickel and platinum/copper) for suppressing the interference effects of seven co-existing elements (potassium, phosphorus, calcium, magnesium, manganese, zinc and iron) in a wild juice were studied and a matrix modifier composed fro;m 10 mug of platinum and 200 mug of nickel was found to give the best performance. Selenium in three juices was determined by electrothermal atomic absorption spectrometry employing the proposed matrix modifier without matrix preseparation. The relative standard deviation was 14% for 0.20 mg l(-1) of selenium. The recoveries were 95-110%. A characteristic mass was 28 pg.     

ICP-AES法测定方铅矿中多元素的方法研究

采用电感耦合等离子体原子发射光谱法(ICP-AES)进行方铅矿中多元素同时测定.通过对方铅矿样品化学处理试验建立了HCl-NH4Cl-HNO3的溶矿体系.本体系采用基体匹配、背景系数和元素干扰系数校正及元素内标法确定了最佳综合实验测试条件.本实验建立的ICP-AES法同时测定方铅矿中镉、钴、铜、铁、铟、铅、锌7种元素的方法,本方法测量相对误差RE (n=8)为1.50%～7.50%,相对标准偏差RSD (n=8)为1.7%～5.7%.经国家一级标准物质GBW 07269分析验证可以满足方铅矿单矿物样品的分析要求.     

Synergetic extraction of platinum(IV) from dilute hydrochloric acid by isoamyl alcohol — Methylisobutylketone mixture

A synergetic extraction system isoamyl alcohol-methylisobutylketone for the quantitative separation of platinum as a matrix component from the attending microimpurities is developed. The influence of the different factors on the extraction efficiency is studied. At optimum conditions, the platinum extraction is over 99%; Al, Ca, Mg, Mn, Ni, Cr are quantitatively retained in the aqueous phase. Cu and Pb are partially extracted but the distribution coefficients are constant, independent of the metals concentration. Investigations are made to explain the synergetic extraction mechanism. This method is recommended for the concentration of microimpurity elements in the analysis of pure platinum.     

锂盐-锍镍试金-等离子质谱法测定黑色页岩中铂族元素

建立锍镍试金-等离子质谱法测定黑色页岩中铂族元素(PGEs)的方法。在不减少称样量的前提下,结合黑色页岩成分特点,调整试金配料,利用硝酸钾的氧化性,解决形成锍扣难的问题;利用四硼酸锂的助融性,使盐酸溶解锍扣后黑色沉淀量大幅度降低,用等离子质谱法测定黑色页岩中铂族元素。PGEs的线性相关系数均不小于0.9995。Pt,Pd,Rh,Ir,Ru的检出限分别为0.30,0.36,0.032,0.028,0.041 ng/g。用该方法测定实际样品,测定值与参考值一致,测定结果的相对标准偏差为1.2%~10.6%(n=10)。该方法满足地质矿产实验室测试质量管理规范(DZ/T 0130-2006)的要求,可用于黑色页岩中铂族元素的测定。     

Matrix effects in the analysis of biological matrices by axial view inductively coupled plasma optical emission spectrometry

We are reporting observations of positive and negative variations of emission line intensities during the determination of boron and titanium in biological matrices by axial view inductively coupled plasma optical emission spectrometry with segmented charge-coupled device detection. The study included the testing of several elements (yttrium, palladium and platinum) and analytical wavelengths for internal standardization, aiming to compensate for variations in signal recovery due to matrix interferences. Human albumin was chosen as principal matrix component to assess the effect of variable chemical and instrumental operating conditions on boron response. A parametric study was performed by considering the application of two different nebulizer–aerosol chamber systems, the effect of plasma operating conditions on analyte and internal standard signals and the influence of common blood plasma electrolytes, added as salts of alkaline or alkaline earth elements. The pneumatic injection systems tested were a standard cross-flow nebulizer with a Scott type spray chamber and a concentric Meinhard type device coupled to a glass cyclonic spray chamber. The change from standard (i.e. medium RF power and relatively high aerosol carrier gas flow rate) to robust (i.e. higher RF power and lower carrier gas flow rate) conditions contributed to large, non-correlated variations in boron intensities and in some of the analyte/internal standard ratios. Significant memory effects were observed for injection of boron solutions prepared with boric acid and containing small amounts of acid, but those effects were negligible when the boron carrier compound was boronophenylalanyne. The injection of titanium solutions did not produce analyte carry-over effects. When internal standards were employed, a less effective signal compensation was consistently observed for boron at higher albumin concentrations when the difference in energies of the lines was between 4.5 and 6 eV. This effect was enhanced for some line pairs when robust conditions are employed. Differences in the response between nebulizers were minor, with a slight advantage in sensitivity for the cross-flow/Scott system. Yttrium was found to be useful for signal compensation in the determination of boron and titanium in blood and human plasma provided that the equivalent concentration of albumin in the nebulized sample dilutions was kept below 0.2% w/v. Simultaneous measurement of a reference strontium line was found to be useful as an additional verification of the response of yttrium as internal standard.     

Effects of concentrated matrices on the determination of trace levels of platinum and gold in aqueous samples using solvent extraction—Zeeman effect graphite furnace atomic absorption spectrometry and inductively coupled plasma—mass spectrometry

Two methods of determining trace levels of platinum and gold in aqueous solutions with high concents of total dissolved solids were investigated. The first involves preconcentration and separation of the precious metals from the interfering matrix by solvent extraction, followed by graphite furnace atomic absorption spectrometry (GFAAS) with Zeeman effect background correction. The direct determination of Pt and Au in solutions of high ionic strength by GFAAS is not desirable because of interference between elements in the matrix and the analyte, increased imprecision of analysis, greatly increased background absorbance leading to increased detection limits and rapid deterioration of the graphite tube. All the extraction methods for gold examined in this study resulted in decreased imprecision, increased sensitivity and lower background absorbance compared with direct measurements on the aqueous solution. All techniques also exhibited good recoveries (> 8%) and reproducibilities (relative standard deviation < 10%). The highest sensitivities for gold extraction from distilled water were obtained for dibutyl sulfide (DBS)—toluene and the lowest for cyanide—dibutyl ketone. The degree of extraction of Au was, however, dependent on the composition of the solution, indicating that standard and sample matrices should be closely matched even when employing solvent extraction. Solvent extraction was generally less successful for Pt. In order to obtain an acceptable imprecision in the Pt extractions, it was found that the use of SnCl₂ as a labilizing agent is essential for most of the techniques investigated.The second method was direct measurement by inductively coupled plasma mass spectrometry (ICP—MS). ICP—MS offers the advantages of a very low detection limit (100 ng l^?1 or better) without preconcentration and a large dynamic range. However, severe matrix effects can occur in concentrated solutions. Whereas high concentrations in solution of both sodium perchlorate and sodium chloride decrease the sensitivity, the presence of sulfide and natural organic (fulvic) acid increase the sensitivity for Pt and Au by a factor of up to 4. Sulfate, on the other hand, decreases the sensitivity of ICP-MS for Pt. The method of standard additions or isotope dilution is recommended for routine use to circumvent this problem, especially when the nature of the matrix is unknown or cannot be easily matched in the standards.     

The determination of platinum and palladium in rocks and soils by electrothermal atomic absorption spectrometry of extracts of their iodo complexes

The method developed for determining platinum and palladium in rocks and soils is based on extraction of iodo complexes of these elements into methyl isobutyl ketone (MIBK), followed by electrothermal atomic absorption spectrometry of the extracts. The limit of detection is 10 ng g^?1 for platinum and 3 ng g^?1 for palladium. Analysis of the standard noble metal ore PTC-1 with recommended values of 12.7 μg g^?1 for palladium and 3.0 μg g^?1 for platinum gave precisions of 4.4% and 5.6%, respectively, and deviations of 5.0% and 1.2% from the recommended values. The method is applicable to the determination of both elements in a wide variety of rocks and soils.     

Comparison of Microwave-Assisted Digestion Methods and Selection of Internal Standards for the Determination of Rh, Pd and Pt in Dust Samples by ICP-MS

Different temperature-pressure controlled microwave-assisted digestion methods were compared for the digestion of dust samples prior to the determination of rhodium and platinum by inductively coupled plasma mass spectrometry (ICP-MS). The results obtained for platinum and rhodium in the digested reference material (BCR-723, road dust) were generally in good agreement with the certified values. However, the determination of matrix elements (Zn, Rb, Sr, Y, Hf and Pb) showed clear differences between the digestion methods. In addition, different internal standards were compared in the determination rhodium, palladium and platinum by ICP-MS. According to the results, even serious non-spectral interferences can be corrected by choosing a suitable internal standard or combination of internal standards.     

Analysis of platinum for certain elemental imparities by neutron activation

Silver, ruthenium, cobalt, iron, zinc, cadmium and mercury are determined in platinum by neutron-activation analysis. The scheme developed requires the removal of the platinum matrix by reduction and the sequential separation of the elements by ion-exchange chromatography. The method is suitable for the simultaneous determination (at the ppm level) of these elements in milligram quantities of platinum.     

分光光度法测定CO助燃剂中铂含量

建立了用分光光度法测定CO助燃剂中铂含量的方法. 在盐酸介质中,Pt（Ⅳ）被氯化亚锡溶液还原,生成黄色的亚氯铂酸（H₂PtC1₄）,最大吸收波长位于403 nm处. 方法简单、快捷、准确,回收率在97%~103%之间,相对标准偏差小于2.0%. 在优化的实验条件下,助燃剂中的常见元素对测定铂含量无干扰.     

电感耦合等离子体质谱法测定高纯金中痕量杂质

建立了高纯金中40余种痕量杂质的电感耦合等离子体质谱测定方法。方法检出限为0．0006～0．21μg/L。考察了基体Au的谱干扰及基体效应,采用Cs内标补偿基体对待测信号的抑制作用。方法简单、快速、灵敏、准确。     

Direct and simultaneous determination of metal impurities in catalysts based on platinum group elements

Production of new catalysts requires effective analytical quality control. The study of trace element composition of heterogeneous catalysts, based on C+PdO, using atomic emission spectrometry (AES) was carried out. A new method for the direct solid-state analysis by means of AES with direct current arc discharge was developed. On the basis of the qualitative analysis of elements, Al, Fe, Ni, Si and Ti have been identified, and for these elements, the quantitative method of determination has been developed. Optimization of excitation parameters and validation of the analytical method are presented. Calibration samples of the following composition were prepared: graphite powder (as a matrix), 3% of PdO and increasing contents of determined element oxides (spectrally pure). Calibrations were calculated by means of the least squares method. Working range for element impurities was from 1% to 0.0003%, and the limits of quantification — LOQ, (10-σ criterion) varied in the range from 0.002% (Ti) to 0.0038% (Si). For the control of active component, palladium was calibrated (working range — 0.01%–10.00%; LOQ ?0.027%). The developed method can be used, also, for the elemental determinations of the other carbon based catalysts with the different active components (of platinum group elements).      

Ion chromatography with inductively coupled plasma mass spectrometry,a powerful analytical tool for complex matrices estimation of Pt and Pd in environmental samples

A new method for palladium and platinum direct determination in environmental samples is proposed by coupling ion chromatography with quadrupole inductively coupled plasma MS. In order to optimise Pd and Pt separation and to minimise interference from matrix in real samples, several anionic and cationic stationary phases have been compared at different mobile phase compositions. In particular, the effect of acidity and of the addition of oxalic acid to the eluent on separation and detection performance has been studied, and the anion-exchange column AG11 turned out to be more suitable. After chromatographic and mass spectrometer parameter optimisation, several potential interferences and the main quality parameters of the method, according to the Eurachem-CITAC recommendations, were evaluated: the detection limit for Pt was 5 ng l(-1) while the value for Pd was 230 ng l(-1). The method was successfully employed in the determination of platinum group elements in urban road dust and atmospheric particulates and the complete absence of matrix spectral interferences was demonstrated.     

Determination of low atomic number elements at trace levels in uranium matrix using vacuum chamber total reflection X-ray fluorescence

Determinations of low atomic number elements Na, Mg and Al present at trace concentrations in uranium matrix were made by vacuum chamber total reflection X-ray fluorescence spectrometer for the first time. For this purpose, synthetic samples of uranium with known amounts of these low atomic number elements were prepared by mixing different volumes of their solutions with U solution of high purity. The concentrations of these elements in the samples were in the range of 100–300 μg/g with respect to uranium and 10–20 μg/mL in the solutions. Major matrix uranium was separated by solvent extraction with 30% solution of tri-n-butyl phosphate in dodecane. After the solvent extraction, aqueous phase containing trace elements was mixed with Sc internal standard and the samples were analyzed by vacuum chamber total reflection X-ray fluorescence spectrometer having a Cr Kα excitation source. The total reflection X-ray fluorescence results obtained, after blank corrections, indicated an average deviation of 14% from the calculated concentrations of these low atomic number elements on the basis of their preparation. However, the total reflection X-ray fluorescence determined concentration of Mg was exceptionally lower than the calculated concentration in two samples. These studies have shown that vacuum chamber total reflection X-ray fluorescence is a promising technique for the determination of low atomic number elements in uranium matrix after its separation.     

电感耦合等离子体原子发射光谱法测定黄铜中主、次量元素

提出了电感耦合等离子体原子发射光谱法同时测定黄铜中铜和锌等主量元素,镍、铅、铝、锡、铁、锰、磷和钴等次量元素的分析方法。选择了各元素的分析谱线,运用干扰元素系数法校正光谱干扰,用内标校正和同步背景校正消除基体影响。各元素的质量分数均在一定的范围内与其信号强度呈线性关系。方法用于分析两个铜合金样品,测定结果与光电直读光谱法、化学法的测定值一致;用于分析3种铜合金标准样品,测定值与标准值相一致。     

Direct solid sample analysis using pressure regulated electrothermal atomization with atomic absorption spectrometry

Summary The elements Ag, Cd, Cu, and V in coal fly ash have been analyzed directly using pressure regulated electrothermal atomization with atomic absorption spectrometry with a relative standard deviation of about 10%. One to four mg of fly ash were added directly to the furnace. A small amount of water was added on top of the sample before drying to prevent expulsion of the very fine particles during chamber evacuation. The methodologies have been verified using standard coal fly-ash (NIST 1633a), and results within the certified concentration range have been obtained. Standard curves from aqueous solutions can be used for the determination of volatile and moderately volatile elements, while the standard additions method was needed for refractory elements due to the analyte expulsion by the fly ash matrix.Presented at the 5th International Colloquium on Solid Sampling, with Atomic Spectroscopy, May 18–20, 1992; Geel, Belgium. Papers edited by R.F.M. Herber, Amsterdam     

A microbatch anion-exchange technique for matrix separation

Summary A rapid and simple one-vessel microbatch anionexchange method has been developed for matrix separation prior to the AAS determination of the trace elements. The method can be applied to the separation of matrix elements which are strongly sorbed on anion exchangers, e.g. gold, palladium, bismuth a.o. The method was illustrated by the flame or ET-AAS determination of 20 trace elements in pure gold. The limits of detection were from 0.002 to 0.4 g/g, the RSD from 3 to 8% depending on the trace element.     

Application of iminodiacetate chelating resin muromac A-1 in on-line preconcentration and inductively coupled plasma optical emission spectroscopy determination of trace elements in natural waters

On-line system incorporating a microcolumn of Muromac A-1 resin was used for the developing of method for preconcentration of trace elements followed by inductively coupled plasma (ICP) atomic emission spectrometry determination. A chelating type ion exchange resin has been characterized regarding the sorption and subsequent elution of 24 elements, aiming to their preconcentration from water samples of different origins. The effect of column conditioning, pH and flow rate during the preconcentration step, and the nature of the acid medium employed for desorption of the retained elements were investigated. A sample (pH 5) is pumped through the column at 3 ml min⁻¹ and sequentially eluted directly to the ICP with 3 M HNO₃/HCl mixtures. In order to remove residual matrix elements from the column after sample loading a short buffer wash was found to be necessary. The effectiveness of the matrix separation process was illustrated. The procedure was validated by analyzing several simple matrices, Standard River water sample as well as artificial seawater. Proposed method can be applied for simultaneous determination of In, Tl, Ti, Y, Cd, Co, Cu and Ni in seawater and for multielement trace analysis of river water. Recovery at 1 μg l⁻¹ level for the determination of investigated 24 elements in pure water ranged from 93.1 to 96% except for Pd (82.2%) and Pb (88.1%). For the same concentration level for seawater analysis recovery was between 81.9 and 95.6% except for Hg (38.2%).     

Analytical Determination and Bio-Monitoring of Platinum Group Elements in Roadside Grass Using Microwave Assisted Digestion and Electrothermal Atomic Absorption Spectrometry

The analytical conditions that enable the determination of traffic related platinum group elements (PGEs) in roadside grass using microwave digestion and electrothermal atomic absorption spectrometry were evaluated as an alternative to the biomonitoring of traffic related PGEs and Pb levels in urban areas. To optimize the analytical conditions and account for matrix effects that could import error in the analysis, method optimization was based on matrix simulation through analyte recovery from spiked unpolluted samples against a matrix blank. A mixture of nitric and hydrofluoric acid under progressively increasing microwave irradiation was optimized to afford the quantitative extraction of platinum group elements from plant matrix. Due to the low levels of platinum group elements in real samples, preconcentration was accomplished using sample evaporation followed by dissolution in dilute nitric acid prior to deliverance to the atomic detector. Quantitation limits below 1 ng g^?1 for Pd and Rh and lower than 2 ng g^?1 for Pt, were accomplished, enabling the monitoring of platinum group elements bioaccumulation in roadside grass with satisfactory recoveries, as determined from the analysis of spiked samples. The results from method application in an annual monitoring survey of PGEs and Pb levels in urban flora and other roadside media are presented and discussed.