Formation of Composites Based on CsHSO<Subscript>4</Subscript> and Cs<Subscript>5</Subscript>H<Subscript>3</Subscript>(SO<Subscript>4</Subscript>)<Subscript>4</Subscript> and Mechanism of Their Protonic Conduction

Vibrational spectra of finely divided amorphous CsHSO₄,Cs₅H₃(SO₄)₄ · H₂O, and composites based on these are measured and analyzed. An analysis of the spectra indicates the occurrence of substantial changes in the system of hydrogen bonds and in the spectral range of the sulfate group of acid sulfates in the composites. Structural dynamics of the SO₄ tetrahedrons is in full conformance with protonic conduction and the data of x-ray diffraction analyses accompanied by differential scanning calorimetry. It is shown that mobility of protons in the composites increases. A mechanism of the formation of the composites and their conduction is proposed.__________Translated from Elektrokhimiya, Vol. 41, No. 5, 2005, pp. 640–645.Original Russian Text Copyright © 2005 by Ponomareva, Lavrova, Burgina.     

Spectroscopic investigation of structure and mechanism of proton conductivity CsHSO<Subscript>4</Subscript> and composites CsHSO<Subscript>4</Subscript>/SiO<Subscript>2</Subscript>

IR and RS spectra, structural, thermodynamical and transport properties of CsHSO₄ and CsHSO₄/SiO₂ composites have been investigated. It is shown that CsHSO₄ is stabilized in composites in phase II (monoclinic modification), which turns into amorphous state with increasing silicon dioxide content. A formation of disordered highly conducting states of CsHSO₄ in composites at the temperatures noticeably lower than superionic phase transition was stated. Bond length equalization in sulfate-ions, weakening of hydrogen bond system, and as a result easier proton transfer in composites in comparison with pure salt take place in these conducting states. Mechanism for formation of composites and their proton conductivity is proposed.     

Microstructure and Conduction of Composites Bi<Subscript>2</Subscript>CuO<Subscript>4</Subscript>-Bi<Subscript>2</Subscript>O<Subscript>3</Subscript> Near the Eutectic Melting Point

Microstructure and conduction of ceramic composites Bi₂CuO₄ + xBi₂O₃ (x = 5, 10, 15, 20 wt %) near the eutectic melting point (770°C) are studied. Bismuth oxide, initially randomly distributed over the ceramics bulk, after quenching from temperatures exceeding the eutectic melting point, becomes localized at triple junctions and grain boundaries in Bi₂CuO₄, which is caused by wetting grain boundaries and forming a liquid-channel structure. The jumpwise change in the composites’ conductivity near 730 and 770°C caused by polymorphic transformation of Bi₂O₃ and the eutectic melting with simultaneous formation of a liquid-channel structure. Transport numbers of the oxygen ion are measured at 770°C by coulomb-volumetric method. The conduction by oxygen ions increases in the composites with decreasing average size of Bi₂CuO₄ crystallites.__________Translated from Elektrokhimiya, Vol. 41, No. 5, 2005, pp. 596–601.Original Russian Text Copyright © 2005 by Lyskov, Metlin, Belousov, Tret’yakov.     

Temperature dependence of the polarization resistance of the O<Subscript>2</Subscript>,Au/La<Subscript>0.88</Subscript>Sr<Subscript>0.12</Subscript>Ga<Subscript>0.82</Subscript>Mg<Subscript>0.18</Subscript>O<Subscript>2.85</Subscript> electrode system

The impedance of a porous gold electrode in contact with solid electrolyte La_0.88Sr_0.12Ga_0.82Mg_0.18O_2.85 and the effect of the manufacture conditions on its polarization resistance are studied at 600–800°C in air. The overall oxygen reaction rate on a gold electrode is described as the sum of two partial constituents, namely, the oxygen exchange at the gas/electrolyte interface at the gold/gas/electrolyte triple-phased boundary.Translated from Elektrokhimiya, Vol. 41, No. 2, 2005, pp. 190–197.Original Russian Text Copyright © 2005 by Shkerin, Sokolova, Khlupin, Beresnev.This revised version was published online in April 2005 with corrections to the article note and article title and cover date.     

Fabrication of a novel Li<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>MoO<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript> film modified electrode and its application as an electrochemical sensor of iodate

A novel organic gel film modified electrode was simply and conveniently fabricated by casting Li_xMoO_y and polypropylene carbonate (PPC) onto the surface of a gold electrode. The cyclic voltammetry and amperometry studies demonstrated that the Li_xMoO_y film modified electrode has a high stability and a good electrocatalytic activity for the reduction of iodate. In amperometry, a good linear relationship between the steady current and the concentration of iodate was obtained in the range from 3×10^–7 to 1×10^–4 mol L^–1 with a correlation coefficient of 0.9997 and a detection limit of 1×10^–7 mol L^–1.     

Solid Electrolytes Based on KAlO<Subscript>2</Subscript>-TiO<Subscript>2</Subscript>: The Crystalline Structure and Conduction

The structure of solid high-conductance potassium electrolytes K_{1 − x} Al_{1 − x} Ti_xO₂ (x = 0.1; 0.2) at 25 and 575°C is studied by a powder neutron diffraction analysis with the application of full-profile Rietveld analysis. Inserting titanium ions removes in potassium aluminate the phase transition at 540°C and the conductance anisotropy typical for its low-temperature form. Both structures are identical (fcc lattice, space group Fd3m). Experiment and calculation coincide best under the assumption that the potassium sublattice is disordered. The conductance increase upon inserting ions Ti⁴⁺ is due, apart from stabilization of the fcc structure, to formation of additional potassium vacancies and larger channels for the migration of potassium cations (ions Ti⁴⁺ are larger than ions Al³⁺).__________Translated from Elektrokhimiya, Vol. 41, No. 7, 2005, pp. 878–883.Original Russian Text Copyright © 2005 by Burmakin, Voronin, Akhtyamova, Berger, Shekhtman.     

Hydrothermal synthesis of one-dimensional (1D) Na<Subscript>x</Subscript>TiO<Subscript>2</Subscript> nanostructures

Nanorods of sodium titanium dioxide bronze Na_xTiO₂ were synthesized by the hydrothermal treatment of the amorphous TiO₂·nH₂O gel with 10 M NaOH followed by ultrasonication in 0.1 M HCl and thermal treatment (500°C, 10 h). The thermal treatment of the nanorods does not change the morphology of the particles. According to the electron diffraction data, the Na_xTiO₂ nanorods grow along the c axis.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 71–73, January, 2005.     

Synthesis of nonequilibrium Ir<Subscript>x</Subscript>Re<Subscript>1-x</Subscript> solid solutions. Crystal structure of [Ir(NH<Subscript>3</Subscript>)<Subscript>5</Subscript>Cl]<Subscript>2</Subscript>[ReCl<Subscript>6</Subscript>]Cl<Subscript>2</Subscript>

Synthesis of five binary complex salts with an [Ir(NH₃)₅Cl]²⁺ complex cation is described. The counterions are [ReCl₆]^2–, [IrCl₆]^2–, [ReBr₆]^2–, and Cl^–. A polycrystal X-ray diffraction study has been performed for [Ir(NH₃)₅Cl]₂[ReCl₆]Cl₂, and its crystal structure has been determined. A series of Ir _x Re_1–x phases (0.5 x > 1) were obtained by reductive thermolysis. For the Ir-Re system, the history of the V/Z(x) dependence has been refined.Original Russian Text Copyright © 2004 by S. A. Gromilov, S. V. Korenev, I. V. Korolkov, K. V. Yusenko, and I. A. BaidinaTranslated from Zhurnal Strukturnoi Khimii, Vol. 45, No. 3, pp. 508–515, May–June 2004.     

Electrochemical Synthesis of Co-intercalation Compounds in the Graphite-H<Subscript>2</Subscript>SO<Subscript>4</Subscript>-H<Subscript>3</Subscript>PO<Subscript>4</Subscript>System

Anodic oxidation of highly oriented pyrolytic graphite in an electrolyte containing concentrated sulfuric and anhydrous phosphoric acids is studied for the first time. The synthesis was carried out under galvanostatic conditions at a current I = 0.5 mA and an elevated temperature (t = 80°C). Intercalation compounds of graphite (ICG) are shown to form at all concentration ratios of H₂SO₄ and H³PO⁴ acids. The intercalation compound of step I forms in solutions containing more than 80 wt % H₂SO₄, a mixture of compounds of intercalation steps I and II forms in 60% H²SO⁴, intercalation step II is realized in the sulfuric acid concentration range from 10 to 40%, and a mixture of compounds of intercalation steps III and II is formed in 5% H₂SO₄ solutions. The threshold concentration of H₂SO₄ intercalation is ∼2%. With the decrease in active intercalate (H₂SO₄) concentration, the charging curves are gradually smoothed, the intercalation step number increases, and the potentials of ICG formation also increase. As the sulfuric acid concentration in the electrolyte changes from 96 to 40 wt %, the filled-layer thickness d _i in ICG monotonously increases from 0.803 to 0.820 nm, which apparently is associated with the greater size of phosphoric acid molecules. With further increase in H₃PO₄ concentration in solution, d _i remains unchanged. According to the results of chemical analysis, both acids are simultaneously incorporated into the graphite interplanar spacing and their ratio in ICG is determined by the electrolyte composition.__________Translated from Elektrokhimiya, Vol. 41, No. 5, 2005, pp. 651–655.Original Russian Text Copyright © 2005 by Leshin, Sorokina, Avdeev.     

Ionic conduction of a high-temperature modification of Lu<Subscript>2</Subscript>Ti<Subscript>2</Subscript>O<Subscript>7</Subscript>

A nanoceramic product of the composition Lu₂Ti₂O₇ is synthesized by a coprecipitation method with a subsequent sublimation drying and an annealing at 650–1650°C. The conduction of Lu₂Ti₂O₇ synthesized at 1650°C is ionic (10^–3 S cm^–1 at 800°C). Thus, a new material with a high ionic conduction has been discovered. The ordering in Lu₂Ti₂O₇ is studied by methods of RFA, RSA, IK spectroscopy, electron microscopy, and impedance spectroscopy. The existence of a low-temperature phase transition fluorite-pyrochlore at 800°C and a high-temperature conversion order-disorder at 1650°C are established.Translated from Elektrokhimiya, Vol. 41, No. 3, 2005, pp. 298–303.Original Russian Text Copyright © 2005 by Shlyakhtina, Ukshe, Shcherbakova.     

Synthesis of Schiff bases and benzylamino derivatives containing [1-B<Subscript>10</Subscript>H<Subscript>9</Subscript>NH<Subscript>3</Subscript>]<Superscript>−</Superscript> anion

Reactions of an amino derivative of the closo-decaborate anion [1-B₁₀H₉NH₃]^– with aromatic aldehydes afforded Schiff bases [1-B₁₀H₉NH=CHAr]^– (Ar=Ph, C₆H₄-2-OMe, or C₆H₄-4-NHCOMe). The reduction of the latter with sodium borohydride gave the corresponding benzylamino derivatives [1-B₁₀H₉NH₂CH₂Ar]^–.Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 2004–2007, September, 2004.     

Moderate-temperature protonic conductors based on CsH<Subscript>2</Subscript>PO<Subscript>4</Subscript> and modified silicon dioxide

With the aim of creating an inert matrix for composite in the (1 ? x) CsH₂PO₄ ? xSiO₂ system, the surface of finely divided dioxide is modified and matrices with more acid centers are produced. Physicochemical properties of composite systems on the basis of these are studied. The role played by acid centers in the formation of more stable and better conductive composite systems in the temperature interval 150 to 250°C is demonstrated. The conductivity of composites based on silicon dioxide modified with CsHSO₄ or H₃PO₄ at 130–230°C is shown to exceed that of the initial phase CsH₂PO₄ and the composite systems based on uniformly porous silicon dioxide with the surface acidity pH ～7 studied previously. The composites are of interest for further research. Compositions of phases under formation and conditions for their existence are determined.     

High performance protonic ceramic membrane fuel cells (PCMFCs) with Ba0.5Sr0.5Zn0.2Fe0.8O3−δ perovskite cathode

Protonic ceramic membrane fuel cells (PCMFCs) based on proton-conducting electrolytes have attracted much attention because of many advantages, such as low activation energy and high energy efficiency. BaZr_0.1Ce_0.7Y_0.2O_3−δ (BZCY7) electrolyte based PCMFCs with stable Ba_0.5Sr_0.5Zn_0.2Fe_0.8O_3−δ (BSZF) perovskite cathode were investigated. Using thin membrane BZCY7 electrolyte (about 15 μm in thickness) synthesized by a modified Pechini method on NiO-BZCY7 anode support, PCMFCs were assembled and tested by selecting stable BSZF perovskite cathode. An open-circuit potential of 1.015 V, a maximum power density of 486 mW cm⁻², and a low polarization resistance of the electrodes of 0.08 Ω cm² was achieved at 700 °C. The results have indicated that BZCY7 proton-conducting electrolyte with BSZF cathode is a promising material system for the next generation solid oxide fuel cells.     

Complexation processes in KF-SbF<Subscript>3</Subscript>-H<Subscript>2</Subscript>O system studied by calorimetric titration

Complexation in a KF-SbF₃-H₂O system is studied in a range of molar ratios of fluorides KF : SbF₃= (0.1–2) : 1 by calorimetric titration. The equilibrium formation constants of complexes KSb₂F₇, KSbF₄, and K₂SbF₅ (5.8×10⁵±800, 3.3×10⁴±500, and 1.9×10⁶± 950, respectively) and the changes in enthalpy (–31.75± 0.74, –28.15±0.44, and –25.5±0.64 J mol^–1, respectively) and entropy (4±7, –8±5, and –35±9 J mol^–1 K^–1, respectively) are determined. The thermodynamic stability of the antimony(III) fluoride complexes is found to increase on going from KSb₂F₇ to K₂SbF₅.Translated from Koordinatsionnaya Khimiya, Vol. 31, No. 3, 2005, pp. 168–171.Original Russian Text Copyright © 2005 by Kovaleva, Zemnukhova, Lebedeva, Fedorishcheva.This revised version was published online in April 2005 with a corrected cover date.This revised version was published online in April 2005 with a corrected cover date.     

A novel anode supported BaCe0.4Zr0.3Sn0.1Y0.2O3−δ electrolyte membrane for proton conducting solid oxide fuel cells

A novel BaCe_0.4Zr_0.3 Sn_0.1Y_0.2O_3−δ (BSY) electrolyte membrane with thickness of 20 μm was fabricated on NiO-based anode substrate via a one-step all-solid-state method followed by a co-sintering at 1450 °C for 5 h. Chemical stability test demonstrated that BSY electrolyte showed adequate chemical stability against CO₂ and H₂O at intermediate temperature. Besides, the doping of Sn also enhanced the conductivity in humidified hydrogen. With Nd_0.7Sr_0.3MnO_3−σ cathode and hydrogen fuel, the fuel cell generated maximum output of 320, 185 and 105 mW cm⁻² at 700, 650 and 600 °C, respectively. The interfacial resistance of the fuel cell was studied under open circuit conditions and the short-term cell performance also confirmed the stability of BSY electrolyte membrane.     

Stabilization of γ‘ phase in Bi<Subscript>4</Subscript>V<Subscript>2-x</Subscript>Fe<Subscript>x</Subscript><Superscript>II</Superscript>O<Subscript>11-1.5x</Subscript> series

Summary This work reports the room-temperature stabilization of the Bi₄V_2-xFe_x^IIO_11-1.5x γ ‘ phase, a promising ionic conductive material that finds application in solid oxide fuel cell and oxygen sensor devices. The Fe(II) cation proved to be a better stabilizer than Fe(III), which was previously used, since a lower substitution degree of V⁵⁺ is needed for the former. Powder X-ray diffraction, Fourier-transform infrared spectroscopy and differential scanning calorimetry were used in these experiments.     

Forms of iron occurrence in a series of binary tellurides Fe<Subscript>x</Subscript>Ti<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Te<Subscript>1.45</Subscript>

Nonstoichiometric tellurides Fe_xTi_1–x Te_1.45 synthesized at 850°C were studied by X-ray phase and X-ray fluorescence analysis and by ⁵⁷Fe Mössbauer spectroscopy. The mutual iron-titanium substitution is limited in this series. The system contains four individual phases in which iron is in three different states: Fe²⁺ in an asymmetric environment, Fe²⁺ in a symmetric environment, and Fe⁰. The distribution of various iron states in the system depends not only on the Fe : Ti ratio, but also on the structure of phases.Translated from Zhurnal Obshchei Khimii, Vol. 74, No. 11, 2004, pp. 1761–1764.Original Russian Text Copyright © 2004 by Pankratova, Zabolotnaya, Panchuk, Semenov, Zvinchuk, Suvorov.This revised version was published online in April 2005 with a corrected cover date.     

Structure and Properties of Solid Solutions in the System YBaCuFeO<Subscript>5</Subscript>-YBaCuCoO<Subscript>5</Subscript>

The crystal structure parameters of solid solutions YBaCuFe_{1 − x} Co_xO₅ (0 ≤ x ≤ 1) were determined, and their thermal stability, thermal expansion, conductance, thermoelectromotive force, dielectric properties, and magnetic sensibility were studied.__________Translated from Zhurnal Prikladnoi Khimii, Vol. 78, No. 5, 2005, pp. 716–720.Original Russian Text Copyright © 2005 by Chizhova, Klyndyuk, Bashkirov, Petrov, Yanushkevich.     

Energetic aspects in description of metal—hydrogen—boron bonds in (B<Subscript>10</Subscript>H<Subscript>14</Subscript>)<Subscript>2</Subscript>Pt and (B<Subscript>8</Subscript>C<Subscript>12</Subscript>H<Subscript>14</Subscript>)<Subscript>2</Subscript>Pt complexes

The energies of formation of platinum complexes with borohydrides B₁₀H₁₄ and B₁₀H ₁₄ ^2- or carboranes B₈C₂H₁₄ and B₈C₂H ₁₄ ^2- were considered in terms of the structure—thermodynamics model. The thermodynamic stability of these complexes was substantiated.Translated from Koordinatsionnaya Khimiya, Vol. 31, No. 2, 2005, pp. 149–152. Original Russian Text Copyright © 2005 by Ionov, Kuznetsov.     

Thermal Decomposition of Ti<Subscript>5</Subscript>(Se,Te)<Subscript>8</Subscript> in Argon and Nitrogen Atmospheres

Chalcogenides TiSe_1.60−x Te_x (0 ≤ x ≤ 1.60), forming a continuous series of hexagonal solid solutions, were prepared by the direct ampule procedure. The thermal decomposition of TiSe_1.60−x Te_x was studied for the samples with x = 0, 0.16, 0.80, 1.44, and 1.60 in Ar and N₂ atmospheres in the course of heating from 25 to 1000°C. The selenide undergoes no weight loss under Ar, in contrast to the telluride which disproportionates and loses weight owing to the formation of volatile TiTe₂. At high temperatures, tellurides are more sensitive than selenides to the presence of nitrogen: The disproportionation is accompanied by the reaction of TiTe₂ with N₂, yielding low-volatile titanium nitride and free tellurium. Titanium selenide and telluride as components of the solid solutions behave similarly to the corresponding individual chalcogenides.__________Translated from Zhurnal Obshchei Khimii, Vol. 75, No. 7, 2005, pp. 1063–1067.Original Russian Text Copyright © 2005 by Pankratova, Zvinchuk, Suvorov, Hatanpaa, Kozlov, Leskela.