Fe Spin crossover materials based on dissymmetrical N4 Schiff bases including 2-pyridyl and 2R-imidazol-4-yl rings: Synthesis,crystal structure and magnetic and Mössbauer properties

The synthesis and characterization of new symmetrical Fe^II complexes, [FeL^A(NCS)₂] (1), and [FeL^Bx(NCS)₂] (2–4), are reported (L^A is the tetradentate Schiff base N,N′-bis(1-pyridin-2-ylethylidene)-2,2-dimethylpropane-1,3-diamine, and L^Bx stands for the family of tetradentate Schiff bases N,N′-bis[(2-R-1H-imidazol-4-yl)methylene]-2,2-dimethylpropane-1,3-diamine, with: R = H for L^B1 in 2, R = Me for L^B2 in 3, and R = Ph for L^B3 in 4). Single-crystal X-ray structures have been determined for 1 (low-spin state at 293 K), 2 (high-spin (HS) state at 200 K), and 3 (HS state at 180 K). These complexes remain in the same spin-state over the whole temperature range [80–400 K]. The dissymmetrical tetradentate Schiff base ligands L^Cx, N-[(2-R₂-1H-imidazol-4-yl)methylene]-N′-(1-pyridin-2-ylethylidene)-2,2-R₁-propane-1,3-diamine (R₁ = H, Me; R₂ = H, Me, Ph), containing both pyridine and imidazole rings were obtained as their [FeL^Cx(NCS)₂] complexes, 5–10, through reaction of the isolated aminal type ligands 2-methyl-2-pyridin-2-ylhexahydropyrimidine (R₁ = H, 5–7) or 2,5,5-trimethyl-2-pyridin-2-ylhexahydropyrimidine (R₁ = Me, 8–10) with imidazole-4-carboxaldehyde (R₂ = H: 5, 8), 2-methylimidazole-4-carboxaldehyde (R₂ = Me: 6, 9), and 2-phenyl-imidazole-4-carboxaldehyde (R₂ = Ph: 7, 10) in the presence of iron(II) thiocyanate. Together with the single-crystal X-ray structures of 7 and 9, variable-temperature magnetic susceptibility and Mössbauer studies of 5–10 showed that it is possible to tune the spin crossover properties in the [FeL^Cx(NCS)₂] series by changing the 2-imidazole and/or C2-propylene susbtituent of L^Cx.     

Synthesis, structures, and catalytic properties for ethylene polymerization of bridged [η,η-C5H4CHPhArO]TiCl2 complexes

A number of bridged half-sandwich titanium complexes [η⁵:η¹-2-C₅H₄CHPh-4-R¹-6-R²C₆H₂O]TiCl₂ [R¹ = H (5), Me (6), ^tBu (7, 8); R² = H (6, 7), ^tBu (5, 8)] were synthesized from the reaction of their corresponding trimethylsilyl substituted ligand precursors 2-Me₃SiC₅H₄CHPh-4-R¹-6-R²C₆H₂OSiMe₃ [R¹ = H (1), Me (2), ^tBu (3, 4); R² = H (2, 3), ^tBu (1, 4)] with TiCl₄ in hexane. All new complexes were characterized by ¹H and ¹³C NMR spectroscopy. Molecular structures of complexes 5 and 8 were determined by single crystal X-ray diffraction analysis. Upon activation with AlⁱBu₃/Ph₃CB (C₆F₅)₄, complexes 5-8 exhibit reasonable catalytic activity for ethylene polymerization and copolymerization with 1-hexene, producing polyethylene and poly(ethylene-co-1-hexene) with moderate molecular weights.     

Electronically variable imino-phenanthrolinyl-cobalt complexes; synthesis, structures and ethylene oligomerisation studies

The 2-imino-1,10-phenanthroline ligands, 1,10-C₁₂H₇N₂-2-CRN(2,6-i-Pr₂-4-R¹-C₆H₂) [R = R¹ = H (L1); R = H, R¹ = Br (L2); R = H, R¹ = CN (L3); R = H, R¹ = i-Pr (L4); R = Me, R¹ = H (L5); R = Me, R¹ = i-Pr (L6)], have been prepared in high yield from the condensation reaction of 1,10-C₁₂H₇N₂-2-CRO (R = H, Me) with one equivalent of the corresponding 4-substituted 2,6-diisopropylaniline. The molecular structures of L2, L5 and L6 reveal the imino nitrogen atoms to adopt a transoid configuration with respect to the phenanthrolinyl nitrogen atoms. Treatment of Lx with one equivalent of CoCl₂ in n-BuOH at 90 °C gives the high spin complexes, (Lx)CoCl₂ [Lx = L1 (1a), L2 (1b), L3 (1c), L4 (1d), L5 (1e), L6 (1f)], in which the metal centres exhibit distorted square pyramidal geometries. Activation of 1a-1f with excess methylaluminoxane (MAO) gives catalysts that are modestly active for the oligomerisation of ethylene affording mainly linear α-olefins along with some degree of internal olefins. While the donor capability of the 4-position of the N-aryl group does not appear to affect the activity of the catalyst, it does have an influence on the ratio of α-olefins to internal olefins. Single crystal X-ray diffraction studies have been performed on L2, L5, L6, 1a, 1c and 1f.     

Study of ferrocenyl-substituted Co2(CO)6-bispropargylic alcohol complexes as substrates for the formation of chains and macrocycles

Treatment of [Fc-1-R¹-1′-R²] (R¹ = H, R² = CH(O); R¹ = H, R² = CMe(O); R¹ = R² = CMe(O)) with LiCCCH₂OLi (prepared in situ from HCCCH₂OH and n-BuLi) affords the ferrocenyl-substituted but-2-yne-1,4-diol compounds of general formula [Fc-1-R¹-1′-{CR(OH)CCCH₂OH}] (R¹ = R = H (1a); R¹ = H, R = Me (1b); R¹ = CMe(O), R = Me (1c)) in low to high yields, respectively (where Fc = Fe(η⁵-C₅H₄)₂). In the case of the reactions of [Fc-1-R¹-1′-R²] (R¹ = H, R² = CH(O); R¹ = R² = CMe(O)), the by-products [Fc-1-R¹-1′-{CR(OH)(CH₂)₃CH₃}] (R¹ = R = H (2a); R¹ = CMe(O), R = Me (2c)) along with minor quantities of [Fc-1,1′-{CMe(OH)(CH₂)₃CH₃}₂] (3) are also isolated; a hydrazide derivative of dehydrated 2c, [1-(CMeCHCH₂CH₂CH₃)-1′-(CMeNNH-2,4-(NO₂)₂C₆H₃)] (2c′), has been crystallographically characterised. Interaction of 1 with Co₂(CO)₈ smoothly generates the alkyne-bridged complexes [Fc-1-R¹-1′-{Co₂(CO)₆-μ-η²-CR(OH)CCCH₂OH}] (R¹ = R = H (4a); R¹ = H, R = Me(4b); R¹ = CMe(O), R = Me (4c)) in good yield. Reaction of 4a with PhSH, in the presence of catalytic quantities of HBF₄ · OEt₂, gives the mono- [Fc-1-H-1′-{Co₂(CO)₆-μ-η²-CH(SPh)CCCH₂OH}] (5) and bis-substituted [Fc-1-H-1′-{Co₂(CO)₆-μ-η²-CH(SPh)CCCH₂SPh}] (6) straight chain species, while with HS(CH₂)_nSH (n = 2,3) the eight- and nine-membered dithiomacrocylic complexes [Fc-1-H-1′-{cyclo-Co₂(CO)₆-μ-η²-CH(S(CH₂)_n-)CCCH₂S-}] [n = 2 (7a), n = 3 (7b)] are afforded. By contrast, during attempted macrocyclic formation using 4b and HSCH₂CH₂OCH₂CH₂SH dehydration occurs to give [Fc-1-H-1′-{Co₂(CO)₆-μ-η²-C(CH₂)CCCH₂OH}] (8). Single crystal X-ray diffraction studies have been reported on 2c′, 4b, 4c, 7b and 8.     

Syntheses,characterizations and crystal structures of monomeric or macrocyclic compounds of di- or triorganotin (IV) moieties with 4,4′-thiodibenzenethiol

Six organotin compounds with 4,4′-thiodibenzenethiol (LH₂) of the type R_nSnL_4−nSnR_n (n = 3: R = Me 1, Ph 2, PhCH₂3, n = 2: R = Me 4, Ph 5, PhCH₂6) have been synthesized. All compounds were characterized by elemental analysis, IR and NMR (¹H, ¹³C, and ¹¹⁹Sn) spectra. The structures of compounds 1, 2, 4, 5 and 6 were also determined by X-ray diffraction analysis, which revealed that compounds 1 and 2 were monomeric structures, compounds 4, 5 and 6 were centrosymmetric dinuclear macrocyclic structures, and all the tin(IV) atoms are four-coordinated. Furthermore, supramolecular structures were also found in compounds 1, 2, 4, 5 and 6, which exhibit one-dimensional chains, two-dimensional networks or three-dimensional structures through intermolecular C–H?S weak hydrogen bonds (WHBs), non-bonded Sn?S interactions or C–H?π interactions.     

Titanium (IV) complexes based on substituted 2-[(2-hydroxyethyl)]aminophenols

Novel substituted 2-[(2-hydroxyethyl)]aminophenols, MeN(CHR¹CR²R³OH)(C₆H₄-o-OH) (2-5), were synthesized by the reaction of 2-methylaminophenol with corresponding oxiranes. Titano-spiro-bis(ocanes) [MeN(CHR¹CR²R³O)(C₆H₄-o-O)]₂Ti 6-9 (2, 6, R¹ = H, R² = R³ = Me; 3, 7, R¹ = R² = Ph (treo-), R³ = H; 4, 8, R¹ = Ph, R² = R³ = H; 5, 9, R¹ = R² = H, R³ = Ph) based on [ONO]-ligands have been synthesized. The obtained compounds were characterized by ¹H and ¹³C NMR spectroscopy and elemental analysis data. The complex [Ti(μ²-O){O-o-C₆H₄}{μ²-CMe₂CH₂}NMe]₆ (10) was obtained by controlled hydrolysis of 6. Molecular structure of 10 was determined by X-ray structure analysis.     

A series of new zirconium complexes bearing bis(phenoxyketimine) ligands: Synthesis, characterization and ethylene polymerization

A series of new zirconium complexes bearing bis(phenoxyketimine) ligands, bis((3,5-di-tert-butyl-C₆H₂-2-O)R₁CN (2-R₂-C₆H₄))ZrCl₂ {R₁ = Me, R₂ = H (2a); R₁ = Et, R₂ = H (2b); R₁ = Ph, R₂ = H (2c); R₁ = 2-Me-Ph, R₂ = H (2d); R₁ = 2-F-Ph, R₂ = H (2e); R₁ = 2-Cl-Ph, R₂ = H (2f); R₁ = 2-Br-Ph, R₂ = H (2g); R₁ = Ph, R₂ = Me (2h); R₁ = Ph, R₂ = F (2i)}, have been prepared, characterized and tested as catalyst precursors for ethylene polymerization. Crystal structure analysis reveals that complex 2c has a six coordinate center in a distorted octahedral geometry with trans-O, cis-N, cis-Cl arrangement which possesses approximate C₂ symmetry. When activated with methylaluminoxane (MAO), complexes 2a-2i exhibited high ethylene polymerization activities of 10⁶-10⁸ g PE (mol M h)⁻¹. Compared with the bis(phenoxyimine) zirconium analogues bis((3,5-di-tert-butyl-C₆H₂-2-O)CHNC₆H₅)ZrCl₂ (3), the introduction of substituent on the carbon atom of the imine double bond enhanced the catalytic activity and molecular weight of prepared polyethylene. Especially, when the H atom at the carbon atom of the imine double bond was replaced by 2-fluoro-phenyl with strong electronic-withdrawing property, complex 2e displayed the highest catalytic activity, and the polyethylene obtained possessed the highest molecular weight and melt point.     

Syntheses, characterizations and crystal structures of new organoantimony(V) complexes with heterocyclic (S, N) ligand

Eight new organoantimony(V) complexes with 1-phenyl-1H-tetrazole-5-thiol [L¹H] and 2,5-dimercapto-4-phenyl-1,3,4-thiodiazole [L²H] of the type R_nSbL_5 − n (L = L¹: n = 4, R = n-Bu 1, Ph 2, n = 3, R = Me 3, Ph 4; L = L²: n = 4, R = n-Bu 5, Ph 6, n = 3, R = Me 7, Ph 8) have been synthesized. All the complexes 1-8 have been characterized by elemental, FT-IR, ¹H and ¹³C NMR analyses. Among them complexes 2, 6 and 8 have also been confirmed by X-ray crystallography. The structure analyses show that the antimony atoms in complexes 2 and 6 display a trigonal bipyramid geometry, while it displays a distorted capped trigonal prism in complex 8 with two intramolecular Sb?N weak interactions. Furthermore, the supramolecular structure of 2 has been found to consist of one-dimensional linear molecular chain built up by intermolecular C-H?N weak hydrogen bonds, while a macrocyclic dimer has been found in complex 6 linked by intermolecular C-H?S weak hydrogen bonds with head-to-tail arrangement. Interestingly, one-dimensional helical chain is recognized in complex 8, which is connected by intermolecular C-H?S weak hydrogen bonds.     

Use of Suzuki cross-coupling as a route to 2-phenoxy-6-iminopyridines and chiral 2-phenoxy-6-(methanamino)pyridines

The anisyl boronic acids, 2-OMe-3-R²-5-R¹-C₆H₂B(OH)₂ (R¹=R²=H (a); R¹=H, R²=Ph (b); R¹=Me, R²=H (c); R¹=Cl, R²=H (d); R¹=t-Bu, R²=H (e)), have been employed in Suzuki cross-coupling reactions with either 2-bromo-6-formylpyridine (I) or 2-bromo-6-acetylpyridine (II) generating, following a facile deprotection step, the 2-phenoxy-6-carbonylpyridines, 2-(2′-OH-3′-R²-5′-R¹-C₆H₂)-6-(CHO)C₅H₃N (R¹=R²=H (1a); R¹=Me, R²=H (1c); R¹=Cl, R²=H (1d); R¹=t-Bu, R²=H (1e)) and 2-(2′-OH-3′-R²-5′-R¹-C₆H₂)-6-(CMeO)C₅H₃N (R¹=R²=H (2a); R¹=H, R²=Ph (2b)). Condensation reactions of 1 and 2 with 2,6-diisopropylaniline proceed smoothly to give the 2-phenoxy-6-iminopyridines, 2-(2′-OH-3′-R²-5′-R¹-C₆H₂)-6-{CHN(2,6-i-Pr₂C₆H₃)}C₅H₃N (R¹=R²=H (3a); R¹=Me, R²=H (3c); R¹=Cl, R²=H (3d); R¹=t-Bu, R²=H (3e)) and 2-(2′-OH-3′-R²-5′-R²-C₆H₂)-6-{CMeN(2,6-i-Pr₂C₆H₃)}C₅H₃N (R¹=H, R²=Ph (4a), R¹=H, R²=Ph (4b)). Reduction of the imino unit (and concomitant C-C bond formation) in 3 can be achieved by treatment with trimethylaluminium or methyllithium which, following hydrolysis, furnishes the racemic chiral 2-phenoxy-6-(methanamino)pyridines, 2-(2′-OH-3′-R²-5′-R¹-C₆H₂)-6-{CHMe-NH(2,6-i-Pr₂C₆H₃)}C₅H₃N (R¹=R²=H (5a); R¹=Me, R²=H (5c); R¹=Cl, R²=H (5d); R¹=t-Bu, R²=H (5e)). This work represents a straightforward and rapid synthetic route to libraries of sterically and electronically variable phenoxy-substituted imino- and methanamino-pyridines, which are expected to act as useful ligands or proligands for late and early transition metal-mediated alkene polymerisation catalysis.     

Synthesis and characterization of aluminum complexes of 2-pyrazol-1-yl-ethenolate ligands

The synthesis and the characterization of some new aluminum complexes with bidentate 2-pyrazol-1-yl-ethenolate ligands are described. 2-(3,5-Disubstituted pyrazol-1-yl)-1-phenylethanones, 1-PhC(O)CH₂-3,5-R₂C₃HN₂ (1a, R = Me; 1b, R = Bu^t), were prepared by solventless reaction of 3,5-dimethyl pyrazole or 3,5-di-tert-butyl pyrazole with PhC(O)CH₂Br. Reaction of 1a or 1b with (R¹ = Me, Et) yielded N,O-chelate alkylaluminum complexes (2a, R = R¹ = Me; 2b, R = Bu^t, R¹ = Me; 2c, R = Me, R¹ = Et). Compound 1a was readily lithiated with LiBuⁿ in thf or toluene to give lithiated species 3. Treatment of 3 with 0.5 equiv of MeAlCl₂ or AlCl₃ yielded five-coordinated aluminum complexes [XAl(OC(Ph)CH{(3,5-Me₂C₃HN₂)-1})₂] (4, X = Me; 5, X = Cl). Reaction of 5 with an equiv of LiHBEt₃ generated [Al(OC(Ph)CH{(3,5-Me₂C₃HN₂)-1})₃] (6). Complex 6 was also obtained by reaction of 3 with 1/3 equiv of AlCl₃. Treatment of 5 with 2 equiv of AlMe₃ yielded complex 2a, whereas with an equiv of AlMe₃ afforded a mixture of 2a and [Me(Cl)AlOC(Ph)CH{(3,5-Me₂C₃HN₂)-1}] (7). Compounds 1a, 1b, 2a-2c and 4-6 were characterized by elemental analyses, NMR and IR (for 1a and 1b) spectroscopy. The structures of complexes 2a and 5 were determined by single crystal X-ray diffraction techniques. Both 2a and 5 are monomeric in the solid state. The coordination geometries of the aluminum atoms are a distorted tetrahedron for 2a or a distorted trigonal bipyramid for 5.     

Self-assembly of di- and triorganotin(IV) complexes: Syntheses, characterization and crystal structures of 1D polymeric chain containing O,O-diethyl or O,O-diisopropyl phosphoric acid ligands

A series of organotin(IV) complexes with O,O-diethyl phosphoric acid (L¹H) and O,O-diisopropyl phosphoric acid (L²H) of the types: [R₃Sn · L]_n (L = L¹, R = Ph 1, R = PhCH₂2, R = Me 3, R = Bu 4; L = L², R = Ph 9, R = PhCH₂10, R = Me 11, R = Bu 12), [R₂Cl Sn · L]_n (L = L¹, R = Me 5, R = Ph 6, R = PhCH₂7, R = Bu 8; L = L², R = Me 13, R = Ph 14, R = PhCH₂15, R = Bu 16), have been synthesized. All complexes were characterized by elemental analysis, TGA, IR and NMR (¹H, ¹³C, ³¹P and ¹¹⁹Sn) spectroscopy analysis. Among them, complexes 1, 2, 3, 5, 8, 9 and 11 have been characterized by X-ray crystallography diffraction analysis. In the crystalline state, the complexes adopt infinite 1D infinite chain structures which are generated by the bidentate bridging phosphonate ligands and the five-coordinated tin centers.     

Syntheses, crystal structures and coordination modes of tri- and di-organotin derivatives with 2-mercapto-4-methylpyrimidine

The organotin (IV) derivatives of 2-mercapto-4-methylpyrimidine (Hmpymt) R₃SnL (R = Ph 1, PhCH₂2, n-Bu 3), R₂SnCl_mL_n (m = 1, n = 1, R = CH₃4, Ph 5, n-Bu 6, PhCH₂7; m = 0, n = 2, R = CH₃8, n-Bu 9, Ph 10, PhCH₂11) were obtained by the reaction of the organotin(IV) chlorides R₃SnCl or R₂SnCl₂ with 2-mercapto-4-methylpyrimidine hydrochloride (HCl · Hmpymt) in 1:1 or 1:2 molar ratio. All complexes 1-11 were characterized by elemental analyses, IR, ¹H, ¹³C and temperature-dependent ¹¹⁹Sn NMR spectra. Except for complexes 3 and 6, the structures of complexes 1, 2, 4, 5, 7, 8-11 were confirmed by X-ray crystallography. Including tin-nitrogen intramolecular interaction, the tin atoms of complexes 1-7 are all five-coordinated and their geometries are distorted trigonal bipyramidal. While the tin atoms of complexes 8-11 are six-coordinated and their geometries are distorted octahedral. Besides, the ligand adopts the different coordination modes to bond to tin atom between the complexes 1, 6, 7 and 2, 3, 4, 5, 8-11. Furthermore, intermolecular Sn?N or Sn?S interactions were recognized in crystal structures of complexes 4, 7 and 11, respectively.     

Transition-metal complexes of phenoxy-imine ligands modified with pendant imidazolium salts: Synthesis, characterisation and testing as ethylene polymerisation catalysts

Reaction between 3-((1R,2R)-2-{[1-(3,5-di-tert-butyl-2-hydroxy-phenyl)-meth-(E)-ylidene]-amino}-cyclohexyl)-1-isopropyl-4-phenyl-3H-imidazol-1-ium bromide (1a) or the derivative 3-((1R,2R)-2-{[1-(2-hydroxy-5-nitro-phenyl)-meth-(E)-ylidene]-amino}-cyclohexyl)-1-isopropyl-4-phenyl-3H-imidazol-1-ium bromide (1b) and metal halides MCl_x.yTHF (M = Zr, x = 4, y = 2; M = V, x = y = 3; M = Cr, x = y = 3), in THF, at −78 °C gives the metal complexes of general formula [MCl_x(κ²-N,O-OC₆H₂R¹R²C(H)N-C₆H₁₀-Im)₂][Br]₂ (where M = Zr, x = 2, R¹ = R² = ^tBu, 2; M = Zr, x = 2, R¹ = H, R² = NO₂, 3; M = V, x = 1, R¹ = R² = ^tBu, 4; M = Cr, x = 1, R¹ = R² = ^tBu, 5; M = Fe, x = 0, R¹ = R² = ^tBu, 6; Im = 1-isopropyl-4-phenyl-3H-imidazol-1-ium-3-yl). ¹H and ¹³C NMR spectroscopy of 2 and 3 indicate κ²-N,O-ligand coordination via the phenoxy-imine moiety with pendant imidazolium salt that is corroborated by a single crystal structure of 6. Compounds 2, 3, 4 and 5 were tested as precatalysts for ethylene polymerisation in the presence of methylaluminoxane (MAO) cocatalyst, showing low activity. Selected polymer samples were characterised by GPC showing multimodal molecular weight distributions.     

Syntheses, characterization and crystal structures of di- and triorganotin (IV) derivatives with 6-amino-1,3,5-triazine-2,4-dithiol

A series of organotin (IV) complexes with 6-amino-1,3,5-triazine-2,4-dithiol of the type [(R_nSnCl_4−n)₂ (C₃H₂N₄S₂)] (n = 3: R = Me 1, n-Bu 2, PhCH₂3, Ph 4; n = 2: R = Me 5, n-Bu 6, PhCH₂7, Ph 8) have been synthesized. All the complexes 1-8 have been characterized by elemental analysis, IR, ¹H and ¹³C NMR spectra. Among them complexes 1, 4, 5 and 8 have also been characterized by X-ray crystallography diffraction analyses, which revealed that the tin atoms of complexes 1, 4, 5 and 8 are all five-coordinated with distorted trigonal bipyramid geometries.     

Incorporation of a tripodal ligand with a (N,O,O)-donor set into a new family of nickel and cobalt spin clusters

The reaction of Ni(OAc)₂, NiX₂ (X = Cl, Br) or CoCl₂ with the proligand 2-amino-2-methyl-1,3-propanediol (ampdH₂) affords a new family of tetranuclear complexes. The syntheses of [Ni₄(OAc)₄(ampdH)₄] (1) and [M₄X₄(ampdH)₄] (M = Ni, X = Cl, 2; M = Ni, X = Br, 3; M = Co, X = Cl, 4) are reported, together with the single crystal X-ray structures of 1, 2 and 4 and the magnetochemical characterization of 1, 3 and 4. Each member of this family of complexes displays a low symmetry structure that incorporates a {M₄O₄} core unit based on a distorted cubane. Magnetic measurements reveal ferromagnetic exchange interactions for 1, 3 and 4. These give rise to S = 4 ground state spins for the tetranuclear Ni complexes and an anisotropic effective S′ = 2 ground state for the Co complex.     

Conversion of novel palladacycles into oxopyrrolo[3,4-b]quinolines

The quinolinylcyclopalladated complexes 3a–b were synthesised in good yields (81% and 77%) by the insertion reaction of the prepared dinuclear palladium complexes [Pd(C,N-2-C₉H₄N-CHO-3-R-6)Cl(PPh₃)]₂ [(R = H (2a), R = OMe (2b)] with isonitrile XyNC (Xy = 2,6-Me₂C₆H₃). The cyclopalladated complexes 3a–b were also obtained in low yields (39% and 33.5%) via a one pot oxidative addition reaction of quinoline chloride 1a–b with isonitrile XyNC:Pd(dba)₂ (4:1). The reactions of 3a–b with Tl(TfO) (TfO = triflate, CF₃SO₃) in the presence of H₂O or EtOH causes depalladation reactions of the complexes to provide the corresponding organic compounds 4a–b, 5a–b and 6a–b in yields (41%, 27% and 18–19%). The products were characterized by satisfactory elemental analyses and spectral studies (IR, ¹H, ¹³C and ³¹P NMR). The crystal structures of 2a, 3a and 3b were determined by X-ray diffraction studies.     

The chemistry of niobium and tantalum halides,MX5, with haloacetic acids and their related anhydrides: Anhydride C–H bond activation promoted by MF5

Niobium and tantalum pentahalides, MX₅ (1), react with acetic acid and halo-substituted acetic acids, in 1:1 ratio, to give the dinuclear complexes [MX₄(μ-OOCMe)]₂ [M = Nb, X = Cl, 2a; M = Ta, X = Cl, 2b; Br, 2c] and [MCl₄(μ-OOCR)]₂ [M = Nb, R = CH₂Cl, 4a; CHCl₂, 4c; CCl₃, 4e; CF₃, 4g; CHBr₂, 4i; CH₂I, 4j; M = Ta, R = CH₂Cl, 4b; CHCl₂, 4d; CCl₃, 4f; CF₃, 4h]. The solid state structures of 2b and 4e have been ascertained by X-ray diffraction studies. The reactions of 1 with acetic anhydride and halo-substituted acetic anhydrides result in C–O bond activation and afford 2 and 4, respectively, with concomitant formation of acetyl halides. Moreover, the complexes MCl₅[OC(Cl)Me] [M = Nb, 3a; M = Ta, 3b] have been detected in significant amounts within the mixtures of the reactions of MCl₅ with acetic anhydride. TaI₅ is unreactive, at room temperature, towards both MeCOOH and (MeCO)₂O. MF₅ react with RCOOH (R = Me, CH₂Cl) in 1:1 molar ratio, to afford the ionic compounds [MF₄(RCOOH)₂][MF₆], 5a–d, in high yields. The additions of (RCO)₂O (R = Me, CH₂Cl) to MF₅ give 5, suggesting that anhydride C–H and C–O bonds activation is operative during the course of these reactions.