Synthesis and characterization of micron‐sized monodisperse superparamagnetic polymer particles with amino groups

Micron‐sized monodisperse superparamagnetic polyglycidyl methacrylate (PGMA) particles with functional amino groups were prepared by a process involving: (1) preparation of parent monodisperse PGMA particles by the dispersion polymerization method, (2) chemical modification of the PGMA particles with ethylenediamine (EDA) to yield amino groups, and (3) impregnation of iron ions (Fe²⁺ and Fe³⁺) inside the particles and subsequently precipitating them with ammonium hydroxide to form magnetite (Fe₃O₄) nanoparticles within the polymer particles. The resultant magnetic PGMA particles with amino groups were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), X‐ray diffractometry (XRD), and vibrating sample magnetometry (VSM). SEM showed that the magnetic particles had an average size of 2.6 μm and were highly monodisperse. TEM demonstrated that the magnetite nanoparticles distributed evenly within the polymer particles. The existence of amino groups in the magnetic polymer particles was confirmed by FTIR. XRD indicated that the magnetic nanoparticles within the polymer were pure Fe₃O₄ with a spinel structure. VSM results showed that the magnetic polymer particles were superparamagnetic, and saturation magnetization was found to be 16.3 emu/g. The Fe₃O₄ content of the magnetic particles was 24.3% based on total weight. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3433–3439, 2005     

Poly(PEGMA) magnetic nanogels: preparation via photochemical method,characterization and application as drug carrier

One-pot synthesis of magnetic nanogels with excellent biocompatibility via the photochemical method is reported in this paper. Poly(PEGMA) modified superparamagnetic nanogels (poly(PEGMA) magnetic nanogels) were synthesized by in-situ polymerization using poly(ethylene glycol) methacrylate (PEGMA) as the monomer and N, N′-methylene-bis-(acrylamide) (MBA) as the cross-linking agent in magnetite aqueous suspension under UV irradiation. The surface functional groups and components of magnetic nanogels were analyzed by Fourier transform infrared spectroscopy (FTIR) and a thermogravimetric analyzer (TGA). The results indicated that the poly(PEGMA) magnetic nanogels were synthesized successfully by coating poly(PEGMA) on the Fe₃O₄ nanoparticles under UV irradiation, and the Fe₃O₄ nanoparticles content in this nanogels was above 50 wt%. The morphology, size, zeta-potential and magnetic property were also characterized. The magnetic nanogels had a nearly spherical shape and core-shell structure, the average size in aqueous system measured by photon correlation spectroscopy (PCS) was 68.4 nm, which was much bigger than that in the dry state, the nanogels behaved superparamagnetically with saturated magnetization of 58.6 emu/g, and the zeta-potential was −16.3–−17.3 mV at physiological pH (6.8–7.4) which could help to maintain stability in blood. The preliminary application as drug carrier was made and the doxorubicin-loaded magnetic nanogels had an excellent property in slow-release. The experiment indicated that the magnetic nanogel was an ideal candidate carrier in target drug delivery systems and other biomedical application. Supported by the Natural Science Foundation of Shandong Province (Grant No. Q2006F01), Scientific and Technological Project of Shandong Province (Grant No. 2007GG3WZ02066) and Scientific and Technological Project of Department of Education, Shandong (Grant No. J07WC01)     

超顺磁性高分子微球的制备与表征

用化学共沉淀方法制备了Fe3O4纳米微粒,并用油酸(十八烯酸)和十二烷基苯磺酸钠为双层表面活性剂进行表面修饰,制备了稳定的水分散性纳米Fe3O4可聚合磁流体.在Fe3O4磁流体存在下,将苯乙烯与甲基丙烯酸通过乳液聚合方法制备了磁性高分子微球.透射电镜研究表明,Fe3O4微粒的平均粒径在10nm左右,乳液聚合形成的磁性高分子微球的粒径平均约为130nm;用超导量子干涉仪对微粒及高分子微球进行了磁性表征,结果表明,合成的Fe3O4纳米微粒以及磁性高分子微球均具有超顺磁性.同时,还用红外光谱及X射线衍射表征了磁性高分子微球的化学成分和晶体结构.用热失重方法测得磁性高分子微球中磁性物质的含量为23.6%.     

In-situ synthesis of PHEMA magnetic nanogels via photochemical method

One-pot synthesis of magnetic nanogels via photochemical method is reported in this paper. Poly(2-hydroxyethyl methacrylate)(PHEMA) magnetic nanogels are synthesized by in-situ polymeriza-tion of 2-hydroxyethyl methacrylate(HEMA) and N,N'-methylene-bis-(acrylamide)(MBA) in Fe3O4 aqueous suspension under UV irradiation. The structure and compositions of magnetic nanogels are characterized by FTIR,TGA,SEM,TEM and PCS. TGA measurement indicates that magnetic nanogels contain 90% magnetite. Both naked Fe3O4 and magnetic nanogels are superparamagnatic at room temperature according to magnetization curves. The swollen capability of the hydrogel shell is proved by contrasting the particles sizes obtained by SEM,TEM and PCS. Particle diameters can be manipu-lated by changing monomer concentration and irradiation time. A mechanism of the coating process is proposed.     

In-situ synthesis of PHEMA magnetic nanogels via photochemical method

One-pot synthesis of magnetic nanogels via photochemical method is reported in this paper. Poly(2-hydroxyethyl methacrylate)(PHEMA) magnetic nanogels are synthesized by in-situ polymerization of 2-hydroxyethyl methacrylate (HEMA) and N,N′-methylene-bis-(acrylamide)(MBA) in Fe₃O₄ aqueous suspension under UV irradiation. The structure and compositions of magnetic nanogels are characterized by FTIR, TGA, SEM, TEM and PCS. TGA measurement indicates that magnetic nanogels contain 90% magnetite. Both naked Fe₃O₄ and magnetic nanogels are superparamagnatic at room temperature according to magnetization curves. The swollen capability of the hydrogel shell is proved by contrasting the particles sizes obtained by SEM, TEM and PCS. Particle diameters can be manipulated by changing monomer concentration and irradiation time. A mechanism of the coating process is proposed. Supported by the Shanghai Municipal Commission for Special Project of Nanometer Science and Technology (Grant No. 0452nm068)     

Impact of initiators in preparing magnetic polymer particles by miniemulsion polymerization

Sub-micron sized polystyrene particles containing magnetite more than 30 wt.% were prepared by miniemulsion polymerization with commercially available ferricolloid. The effects of some water-soluble initiators and/or oil-soluble initiators on the particles characteristics, such as the size, morphology, magnetic properties and colloidal stability, were studied. The size of monomer droplets/polymer particles increased from 60 to 300 nm during polymerization, keeping magnetic in core when potassium persulfate (KPS) or ammonium persulfate (APS) was used as the sole initiator. These particles were easily separated from the medium within short time scale in external magnetic field, while such characteristics were controlled by the amount of persulfate used for the polymerization. In contrast, when 2,2′-azobis isobutyronitrile (AIBN) was used as the initiator, the size of droplets/particles was retained to be 90 nm at the most and magnetite nanoparticles located at the surface of polystyrene particles, which were so colloidally stable that they were not separated in external magnetic field. The above-mentioned effect of initiators on particle size in persulfate system was likely originated from the decrease of pH value and the increase of ionic strength, which induced the fusion of droplets/particles containing magnetite. Mixed-initiators system resulted in intermediate characteristics, compared with each initiator system. The location of magnetite in the particle seems to depend on where initiation/polymerization occurred in each initiator system.     

Hydrophilic magnetic polymer latexes. 2. Encapsulation of adsorbed iron oxide nanoparticles

The encapsulation of seed polymer particles coated by anionic iron oxide nanoparticles has been investigated using N-isopropylacrylamide as a main monomer, N,N-methylene bisacrylamide as a crosslinking agent, itaconic acid as a functional monomer and potassium persulfate as an anionic initiator. The magnetic latexes obtained have been characterized with regard to particle size, iron oxide content and electrophoretic mobility. All these properties have been examined by varying several polymerization parameters: reaction medium, monomer(s) and crosslinking agent concentrations, nature of seed latexes and type of polymerization (batch versus shot process). The magnetic content in the polymer microspheres strongly depends on the polymerization procedure (i.e., encapsulation process) and varies between 6 and 23 wt%, and monodisperse magnetic polymer particles were obtained. Received: 28 December 1999 Accepted in revised form: 15 June 1999     

Surfactant-free miniemulsion polymerization as a simple synthetic route to a successful encapsulation of magnetite nanoparticles

Due to the existing interest in new hybrid particles in the colloidal range based on both magnetic and polymeric materials for applications in biotechnological fields, this work is focused on the preparation of magnetic polymer nanoparticles (MPNPs) by a single-step miniemulsion process developed to achieve better control of the morphology of the magnetic nanocomposite particles. MPNPs are prepared by surfactant-free miniemulsion polymerization using styrene (St) as a monomer, hexadecane (HD) as a hydrophobe, and potassium persulfate (KPS) as an initiator in the presence of oleic acid (OA)-modified magnetite nanoparticles. The effect of the type of cross-linker used [divinylbenzene (DVB) and bis[2-(methacryloyloxy)ethyl] phosphate (BMEP)] together with the effect of the amount of an aid stabilizer (dextran) on size, particle size distribution (PSD), and morphology of the hybrid nanoparticles synthesized is analyzed in detail. The mixture of different surface modifiers produces hybrid nanocolloids with various morphologies: from a typical core-shell composed by a magnetite core surrounded by a polymer shell to a homogeneously distributed morphology where the magnetite is uniformly distributed throughout the entire nanocomposite.     

Facile synthesis of superparamagnetic magnetite nanoparticles in liquid polyols

Magnetite nanoparticles have been successfully synthesized in liquid polyols at elevated temperature. Polyol solvent plays a crucial role in determining the morphology and colloidal stability of the resulting particles. The structure and morphology of the nanoparticles were studied using XRD, TEM, SAED, TGA and FTIR. The magnetic properties of the samples were measured using physical properties measurement system (PPMS) of Quantum Design. The results show that as-prepared magnetite nanoparticles are monodisperse, highly crystalline and superparamagnetic at room temperature. The nanoparticles can be easily dispersed in aqueous media and other polar solvents due to coated by a layer of hydrophilic polyol ligands in situ. This approach provides a facile route to prepare magnetite nanoparticles.     

Poly(p‐phenylenediamine)‐coated magnetic particles: Preparation and electrochemical properties

Magnetic particles are of great interest in various biomedical applications, such as, sample preparation, in vitro biomedical diagnosis, and therapy. For biosensing applications, the used functional magnetic particles should answer numerous criteria such as; submicron size in order to avoid rapid sedimentation, high magnetic content for fast separations under applied magnetic field, and finally, good colloidal stability. Therefore, the aim of this work was to prepare submicron magnetic core and conducting polymer shell particles. The polymer shell was induced using p‐phenylenediamine as key monomer. The obtained core–shell particles were characterized in terms of particle size, size distribution, magnetization properties, Fourier transform infrared (FTIR) analysis, surface morphology, chemical composition, cyclic voltammetry, and impedance spectroscopy. The best experimental condition was found using 40 mg of povidone (PVP—stabilizing agent) and 0.16 mmol of p‐phenylenediamine. Using such initial composition, the core‐shell magnetic nanoparticles shown a narrowed size distribution around 290 nm and high magnetic content (above 50%). The obtained amino containing submicron highly magnetic particles were found to be a conducting material and superparamagnetic in nature. These promising conducting magnetic particles can be used for both transport and lab‐on‐a‐chip detection.     

Physical and Chemical Properties of Magnetite and Magnetite-Polymer Nanoparticles and Their Colloidal Dispersions

The properties of polymer-coated magnetite nanoparticles, which have the potential to be used as effective magnetic resonance contrast agents, have been studied. The magnetite particles were synthesized by using continuous synthesis in an aqueous solution. The polymer-coated magnetite nanoparticles were synthesized by seed precipitation polymerization of methacrylic acid and hydroxyethyl methacrylate in the presence of the magnetite nanoparticles. The particle size was measured by laser light scattering. It was shown that the particle size, variance, magnetic properties, and stability of aqueous magnetite colloidal dispersion strictly depend on the nature of the stabilizing agent. The average hydrodynamic radius of the magnetite particles was found to be 5.7 nm in the stable aqueous colloidal dispersion. An inclusion of the magnetite particle into a hydrophilic polymeric shell increases the stability of the dispersion and decreases the influence of the stabilizing agent on the magnetic and structural properties of the magnetite particles as was shown by X-ray diffraction and M?ssbauer and IR spectroscopy, as well as by vibrating sample magnetometry. The variation in the polymeric shell size and the polymer net density can be useful tools for evaluation of the polymer-coated magnetite particles as effective contrast agents. Copyright 1999 Academic Press.     

Core–shell SiO2‐coated Fe3O4 with a surface molecularly imprinted polymer coating of folic acid and its applicable magnetic solid‐phase extraction prior to determination of folates in tomatoes

A novel core–shell magnetic surface molecularly imprinted polymer with folic acid as a template was successfully synthesized by the sol–gel method. To generate Lewis acid sites in the silica matrix for the interaction of the metal coordinate with the template, 3‐aminopropyltriethoxysilane was used as a functional monomer, tetraethyl orthosilicate as a cross‐linker, and aluminum ions as a dopant. The magnetite encapsulated by the silica shell plays an important role as a magnetic‐coated polymer. The synthesized product was characterized by powder X‐ray diffraction, scanning electron microscopy, transmission electron microscopy, and FTIR and UV/Vis spectroscopy. The powder X‐ray diffraction patterns, FTIR and UV/Vis spectra confirmed the characteristics of the as‐prepared silica coated magnetite and folic acid molecularly imprinted polymer. It was successfully applied for magnetic solid‐phase extraction prior to the determination of folates in tomato samples using high‐performance liquid chromatography with photodiode array detection. The detection limit of the proposed method was 1.67 μg/L, and results were satisfactory, with a relative standard deviation of < 3.94%.     

Self-stabilized magnetic polymeric composite nanoparticles by emulsifier-free miniemulsion polymerization

Self-stabilized magnetic polymeric composite nanoparticles (SS-MPCPs) were prepared by emulsifier-free miniemulsion polymerization using styrene (St) as a monomer, sodium p-styrenesulfonate (NaSS) as an ionic comonomer, hexadecane (HD) as a hydrophobe, and 2,2'-azodiisobutyronitrile (AIBN) as an initiator in the presence of hydrophobic magnetite particles. The hydrophobic magnetite particles with an average size of about 10 nm were prepared by the acidification of the water-based magnetite ferrofluid, previously synthesized by a chemical coprecipitation method. Some colloidal features of the synthesized SS-MPCPs were analyzed. The morphology and the particle size distributions (PSDs) of the SS-MPCPs were observed and analyzed by transmission electron microscopy (TEM). The surface charge density was determined by conductometric titration. The surface hairy layer and the colloidal stability of SS-MPCPs against different electrolytes were determined by photon correlation spectroscopy (PCS). The average Fe3O4 content of SS-MPCPs was determined by thermogravimetric analysis (TGA). Vibrating sample magnetometry (VSM) was used to analyze the magnetic properties of the SS-MPCPs under dry conditions. The results show that the encapsulation of magnetite is successful and the distribution of magnetite particles inside SS-MPCPs is mainly in the core of the particles. The best SS-MPCPs prepared had a relatively narrow PSD, exhibited superparamagnetism, and possessed some magnetic response.     

含稀土铕双功能荧光磁性纳米粒子的制备及性能表征

首先制备了油酸和十一烯酸钠改性的水基磁流体,然后在其存在的情况下,将可聚合的稀土铕配合物单体Eu(AA)3Phen(AA=丙烯酸,phen=邻菲罗啉)与苯乙烯和甲基丙烯酸缩水甘油酯在过硫酸钾的引发下,进行无皂种子乳液聚合来制备荧光磁性高分子微球。 利用透射电子显微镜和动态光散射粒度仪表征了粒子的形貌及粒径,发现荧光磁性微球具有明显的核-壳结构及较窄的粒径分布;通过红外光谱和X射线衍射分析表征了粒子的化学及晶体结构;通过振动样品磁强计和荧光分光光度计表征粒子的磁性及荧光性能,发现荧光磁性微球具有超顺磁性,其荧光发射光谱在594和619 nm处出现Eu3+的特征荧光发射峰。     

Kinetic studies of surface‐initiated atom transfer radical polymerization in the synthesis of magnetic fluids

We present results from kinetic studies on the surface‐initiated atom transfer radical polymerization in the preparation of polymer brush‐coated magnetic particles from a heterogeneous system. It is shown that a controlled reaction behavior and a reproducible surface functionalization with end‐tethered polymers are achieved, although the reaction advances gradually from a biphasic solid–liquid mixture to a stable colloidal dispersion of the nanoobjects. Although the initiator‐functional magnetite nanoparticles initially form a precipitate, the formation of a polymer layer on the particle surface in the course of the reaction contributes to a sterical stabilization in dispersion. We thoroughly investigated the development of the initial heterogeneous system with time and in various concentration regimes by simultaneously monitoring the monomer conversion, molar mass, the hydrodynamic diameter of the nanoobjects, and the magnetite content of the dispersions at different reaction times. The results indicate first‐order chain growth kinetics with respect to the monomer and narrow molar mass distributions, demonstrating good control on the particle architecture. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2009     

Synthesis of Stimuli-responsive Nanoparticles by Solution Polymerization

In this study, stimuli-responsive nanoparticles were prepared by solution polymerization. Two synthesis routes are proposed to synthesize the particles, the monomer route and the polymer/monomer route. For the monomer route, pH and thermal sensitive nanoparticles were synthesized from acrylic acid and N-isopropylacrylamide. For the polymer/monomer route, the pH sensitive nanoparticles were synthesized from chitosan and acrylic acid. The effect of reaction time, initiator concentration and agitation rate on the particle size and the size distribution were investigated. The stimuli-responsive nanoparticles could be directly blended with other polymers to prepare stimuli-responsive functional membranes.     

Novel preparation of magnetite/polystyrene composite particles via inverse emulsion polymerization

In this paper, super-paramagnetic magnetite/polystyrene (PSt) composite particles were prepared by inverse emulsion polymerization with water-based magnetic ferro-fluid as dispersing phase and organic solvent and styrene (St) as continuous phase. And the mechanism of the nucleation was discussed. The influence of factors, such as the monomer content, the amount of the ferro-fluid and the different continuous phases on the morphology of the magnetite/polystyrene composite particles was studied. The final products were characterized by X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM) and thermogravimetric analysis (TGA). Magnetic hysteresis loop measurements revealed that the composite particles were super-paramagnetic.     

Nanocomposite particles with core-shell morphology II. An investigation into the affecting parameters on preparation of Fe3O4-poly (butyl acrylate-styrene) particles via miniemulsion polymerization

The encapsulation of inorganic particles with polymers is desirable for many applications in order to improve the stability of the encapsulated products and disperse ability in different media. Colloidal particles with magnetic properties have become increasingly important both technologically and for fundamental studies. This is due to their tunable anisotropic. In the absence of an applied magnetic field, the particles have isotropic sphere dispersion, whereas in an external magnetic field the particles form anisotropic structures. Here, latexes containing nanocomposite particles of styrene-butyl acrylate/Fe₃O₄ with core-shell structure were prepared through miniemulsion polymerization technique. Magnetic composite nanospheres with high magnetic content were synthesized through miniemulsion polymerization using a new process based on a three-steps preparation route including two miniemulsion processes: (1) preparing a dispersion of oleic acid coated magnetite particles in water; (2) mixing of modified magnetite particles with styrene/butyl acrylate in the presence of sodium dodecyl sulfate (SDS), sorbitane mono oleate (Span 80), hexadecane (HD) and (3) miniemulsification of the modified Fe₃O₄ into the monomer droplets to reach to complete encapsulation. Subsequent polymerization generated magnetic nanocomposite spheres. Hence, the copolymerization reaction was performed on the surface of such particles in order to obtain core-shell morphology for these nanoparticles, which were characterized by several techniques such as TEM, SEM, DLS, TGA, VSM and FT-IR. The magnetic copolymer particles with diameter of 120-170 nm were obtained. The effect of several parameters such as magnetite, surfactants and hydrophobe amounts on the stability, particle size and magnetization were investigated and also optimized.     

Effect of the swelling degree on the formation of magnetite nanoparticles in hydrogels

Composites containing magnetite nanoparticles in poly(acrylamide-co-hydroxyethylacrylate) cross-linked using poly-ethylene-glycol-diacrylate were prepared and characterized. The magnetite was synthesized in situ in the polymer network by treatment with a water solution of Fe (II) and Fe (III). The salts were then coprecipitated by exposing the swollen gels to ammonia vapors and the obtained magnetic gels dried. The ratio acrylamide (AM)/hydroxyethylacrylate (HEA) was varied to compare matrices with different hydrophilicity. Moreover solutions with different concentration of iron salts were used to swell the gels. The effect of both the network composition and the concentration of iron salts in the swollen polymers on the final structure and properties of the dried magnetic polymers were studied. The investigation was carried out by means of electron diffraction, X-ray diffraction, vibrating sample magnetometry, small angle X-ray scattering and transmission electron microscopy. The coercivity of the magnetic composites prepared was close to zero and they provided super-paramagnetic properties. The decrease of the acrylamide content in the polymer gel and of the iron salts concentration in the swelling aqueous solution leads to the formation of amorphous particles of iron oxide. The average sizes of the magnetite nanoparticles obtained are compared.     

Preparation of magnetic polystyrene latex via the miniemulsion polymerization technique

Magnetic iron oxide (magnetite, Fe₃O₄) nanoparticles were encapsulated with polystyrene to give a stable water‐based magnetic polymer latex, using the miniemulsion polymerization technique. The resulting magnetic latexes were characterized with transmission electron microscopy (TEM), dynamic light scattering (DLS), vibrating sample magnetometer measurements (VSM), and ⁵⁷Fe Mössbauer spectroscopy measurements. TEM revealed that all magnetite nanoparticles were embedded in the polymer spheres, leaving no empty polystyrene particles. The distribution of magnetite particles within the polystyrene spheres was inhomogeneous, showing an uneven polar appearance. The DLS measurements indicated a bimodal size distribution for the particles in the latexes. According to our magnetometry and Mössbauer spectroscopy data, the encapsulated magnetite particles conserve their superparamagnetic feature when they are separated in the polymer matrix. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4802–4808, 2004