Thermoresponsive diblock copolymer micellar macro‐RAFT agent‐mediated dispersion RAFT polymerization and synthesis of temperature‐sensitive ABC triblock copolymer nanoparticles

The micellar macro‐RAFT agent‐mediated dispersion polymerization of styrene in the methanol/water mixture is performed and synthesis of temperature‐sensitive ABC triblock copolymer nanoparticles is investigated. The thermoresponsive diblock copolymer of poly(N,N‐dimethylacrylamide)‐block‐poly[N‐(4‐vinylbenzyl)‐N,N‐diethylamine] trithiocarbonate forms micelles in the polymerization solvent at the polymerization temperature and, therefore, the dispersion RAFT polymerization undergoes as similarly as seeded dispersion polymerization with accelerated polymerization rate. With the progress of the RAFT polymerization, the molecular weight of the synthesized triblock copolymer of poly(N,N‐dimethylacrylamide)‐block‐poly[N‐(4‐vinylbenzyl)‐N,N‐diethylamine]‐b‐polystyrene linearly increases with the monomer conversion, and the PDI values of the triblock copolymers are below 1.2. The dispersion RAFT polymerization affords the in situ synthesis of the triblock copolymer nanoparticles, and the mean diameter of the triblock copolymer nanoparticles increases with the polymerization degree of the polystyrene block. The triblock copolymer nanoparticles contain a central thermoresponsive poly [N‐(4‐vinylbenzyl)‐N,N‐diethylamine] block, and the soluble‐to‐insoluble ‐‐transition temperature is dependent on the methanol content in the methanol/water mixture. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2155–2165     

Synthesis and Characterization of Thermotropic Liquid Crystalline Poly(ester-imide)s

A series of thermotropic liquid crystalline poly(ester-imide)s was synthesized by melt polymerization of diacetoxynaphthalene acid and n-(ω-carboxyalkylene) trimellitic imides. All polymers with 2,6 substituent positions (n-2,6 PEIM) on the napthalene ring exhibit liquid crystalline phases, whereas polymers with 2,7 substituent positions (n-2,7 PEIM) do not. This result suggests that the kink structure of n-2,7 PEIMS would hinder the formation of liquid crystalline polymer. The copoly(ester-imide)s with an irregular sequence of aliphatic units and aromatic mesogens showed the liquid crystallinity with the lower transition temperatures and a lesser tendency to crystallize than homopoly(ester-imide)s. The semicrystalline polymers with more regular monomeric sequence in the main chain showed the hysteresis of viscoelastic property in the temperature cycle. A nematic glassy copolymer gave the higher molecular orientation to the fiber than a semicrystalline polymer. © 1997 John Wiley & Sons, Ltd.     

Photoreversible Gelation of a Triblock Copolymer in an Ionic Liquid

The reversible micellization and sol–gel transition of block copolymer solutions in an ionic liquid (IL) triggered by a photostimulus is described. The ABA triblock copolymer employed, denoted P(AzoMA‐r‐NIPAm)‐b‐PEO‐b‐P(AzoMA‐r‐NIPAm)), has a B block composed of an IL‐soluble poly(ethylene oxide) (PEO). The A block consists of a random copolymer including thermosensitive N‐isopropylacrylamide (NIPAm) units and a methacrylate with an azobenzene chromophore in the side chain (AzoMA). A phototriggered reversible unimer‐to‐micelle transition of a dilute ABA triblock copolymer (1 wt %) was observed in an IL, 1‐butyl‐3‐methylimidazolium hexafluorophosphate ([C₄mim]PF₆), at an intermediate “bistable” temperature (50 °C). The system underwent a reversible sol–gel transition cycle at the bistable temperature (53 °C), with reversible association/fragmentation of the polymer network resulting from the phototriggered self‐assembly of the ABA triblock copolymer (20 wt %) in [C₄mim]PF₆.     

Synthesis and characterization of amphiphilic triblock copolymers by iron‐mediated atom transfer radical polymerization

The atom transfer radical polymerization of methyl methacrylate (MMA) and n‐butyl methacrylate (n‐BMA) was initiated by a poly(ethylene oxide) chloro telechelic macroinitiator synthesized by esterification of poly(ethylene oxide) (PEO) with 2‐chloro propionyl chloride. The polymerization, carried out in bulk at 90 °C and catalyzed by iron(II) chloride tetrahydrate in the presence of triphenylphosphine ligand (FeCl₂ · 4H₂O/PPh₃), led to A–B–A amphiphilic triblock copolymers with MMA or n‐BMA as the A block and PEO as the B block. A kinetic study showed that the polymerization was first‐order with respect to the monomer concentration. Moreover, the experimental molecular weights of the block copolymers increased linearly with the monomer conversion, and the molecular weight distribution was acceptably narrow at the end of the reaction. These block copolymers turned out to be water‐soluble through the adjustment of the content of PEO blocks (PEO content >90% by mass). When the PEO content was small [monomer/macroinitiator molar ratio (M/I) = 300], the block copolymers were water‐insoluble and showed only one glass‐transition temperature. With an increase in the concentration of PEO (M/I = 100 or 50) in the copolymer, two glass transitions were detected, indicating phase separation. The macroinitiator and the corresponding triblock copolymers were characterized with Fourier transform infrared, proton nuclear magnetic resonance, size exclusion chromatography analysis, dynamic mechanical analysis, and differential scanning calorimetry. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5049–5061, 2005     

Novel Amphiphilic Diblock and Triblock Liquid‐Crystalline Copolymers with Well‐Defined Structures Prepared by Atom Transfer Radical Polymerization

Summary: Based on a hydrophilic poly(ethylene oxide) macroinitiator (PEOBr), a novel amphiphilic diblock copolymer PEO‐block‐poly(11‐(4‐cyanobiphenyloxy)undecyl) methacrylate) (PEO‐b‐PMA(11CB)) was prepared by atom transfer radical polymerization (ATRP) using CuCl/1,1,4,7,10,10‐hexamethyltriethylenetriamine as a catalyst system. An azobenzene block of poly(11‐[4‐(4‐butylphenylazo)phenoxyl]undecyl methacrylate) was then introduced into the copolymer sequence by a second ATRP to synthesize the corresponding triblock copolymer PEO‐b‐PMA(11CB)‐b‐PMA(11Az). Both of the amphiphilic block copolymers had well‐defined structures and narrow molecular‐weight distributions, and exhibited a smectic liquid‐crystalline phase over a wide temperature range.

The amphiphilic triblock copolymer synthesized here.     

RAFT‐mediated batch emulsion polymerization of styrene using poly[N‐(4‐vinylbenzyl)‐N,N‐dibutylamine hydrochloride] trithiocarbonate as both surfactant and macro‐RAFT agent

Poly[N‐(4‐vinylbenzyl)‐N,N‐dibutylamine hydrochloride] trithiocarbonate, which contains the reactive trithiocarbonate group and the appending surface‐active groups, is used as both surfactant and macromolecular reversible addition‐fragmentation chain transfer (macro‐RAFT) agent in batch emulsion polymerization of styrene. Under the conditions at high monomer content of ～20 wt % and with the molecular weight of the macro‐RAFT agent ranging from 4.0 to 15.0 kg/mol, well‐controlled batch emulsion RAFT polymerization initiated by the hydrophilic 2‐2′‐azobis(2‐methylpropionamidine) dihydrochloride is achieved. The polymerization leads to formation of nano‐sized colloids of the poly[N‐(4‐vinylbenzyl)‐N,N‐dibutylamine hydrochloride]‐b‐ polystyrene‐b‐poly[N‐(4‐vinylbenzyl)‐N,N‐dibutylamine hydrochloride] triblock copolymer. The colloids generally have core‐shell structure, in which the hydrophilic block forms the shell and the hydrophobic block forms the core. The molecular weight of the triblock copolymer linearly increases with increase in the monomer conversion, and the values are well‐consistent with the theoretical ones. The molecular weight polydispersity index of the triblock copolymer is below 1.2 at most cases of polymerization. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

含联苯结构侧链液晶聚合物的合成及相行为的研究

液晶聚合物从结构上可分为3种:侧链型、主链型和主侧链型。侧链型液晶聚合物主要是聚丙烯酸酯类、聚硅氧烷类以及磷腈聚合物类。Gray等对聚丙烯酸酯类含不同取代基的联苯结构液晶聚合物进行了研究,结果表明无间隔基且取代基为氰基和饱和脂肪基时,该聚合物呈现近晶型液晶行为。为了增加介晶单元的长径比及刚性,本文在聚甲基丙烯酸酯侧链     

Binary Mixtures of Liquid Crystalline Ester Bismaleimides

Abstract

A binary system consisting of a chlorohydroquinone-based ester bismaleimide (3-Cl), T _m = 238°C, and a methylhydroquinone-based ester bismaleimide (3-Me), T _m = 251°C, was investigated for the purpose of improving processability by widening the nematic phase range before polymerization. Calculations based on the Schroeder-van Laar equation predicted a system eutectic composition of 41% 3-Me monomer and a eutectic temperature of 202°C. Experiments found the eutectic composition at 35% 3-Me and the eutectic temperature at 218.5°C. Discrepancies between experimental results and theoretical predictions are likely due to error in measured heats of fusion either due to impurities in the samples or due to the reactive nature of the components being considered. Thermal cycling was also found to have a significant melting point depression effect. While significant depression of the system melting point was achieved, polymerization still occurred immediately after melting in all systems evaluated. All mixtures could be polymerized from the nematic phase to yield a solid which retained the nematic orientation of the starting polymer melt.     

侧基含羟基的主链偶氮苯液晶共聚酯的合成及其光响应行为

以4,4’-双(6-羟基己氧基)联苯(BHHBP)、4,4’-双(6-羟基己氧基)偶氮苯(BHHAB)为液晶基元,利用苹果酸二乙酯(DM)和苯基丁二酸(PSA)采用无规共聚,合成了侧基含羟基的偶氮苯液晶共聚酯(Az-LCP).先在液晶态下拉伸取向,然后用六亚甲基二异氰酸酯(HDI)交联制备单畴取向偶氮苯液晶交联网络.通过核磁共振氢谱(1H-NMR)、凝胶渗透色谱(GPC)测试,对合成的Az-LCP进行结构表征,通过示差扫描量热分析(DSC)、X射线衍射(XRD)、偏光光学显微镜(POM)等对其液晶相变行为进行表征,研究了偶氮苯含量、交联密度、薄膜厚度对其光致弯曲行为的影响.结果表明,偶氮苯含量10%,交联12 h的Az-LCP1具有最佳的光致弯曲回复行为.     

Polystyrene‐graft‐poly(ethylene oxide) copolymers prepared by macromonomer technique in dispersion. I. Liquid chromatographic separation of product mixtures

Products of the radical dispersion copolymerization of methacryloyl‐terminated poly(ethylene oxide) (PEO) macromonomer and styrene were separated and characterized by size exclusion chromatography (SEC), full adsorption‐desorption (FAD)/SEC coupling and eluent gradient liquid adsorption chromatography (LAC). In dimethylformamide, which is a good solvent for PEO side chains but a poor solvent for polystyrene (PS), amphiphilic PS‐graft‐PEO copolymers formed aggregates, which were very stable at room temperature even upon substantial dilution. The aggregates disappeared at high temperature or in tetrahydrofuran (THF), which is a good solvent for both homopolymers and for PS‐graft‐PEO. FAD/SEC procedure allowed separation of homo‐PS from graft‐copolymer and determination of both its amount and molar mass. Effective molar mass of graft‐copolymer was estimated directly from the SEC calibration curve determined with PS standards. Presence of larger amount of the homo‐PS in the final graft‐copolymer products was also confirmed with LAC measurements. The results indicate that there are at least two or maybe three polymerization loci; namely the continuous phase, the particle surface layer and the particle core. The graft copolymers are produced mainly in the continuous phase while PS or copolymer rich in styrene units is formed mostly in the core of monomer‐swollen particles. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2284–2291, 2000     

Hydrophilic–hydrophobic AB diblock copolymers containing poly(trimethylene carbonate) and poly(ethylene oxide) blocks

AB‐type block copolymers with poly(trimethylene carbonate) [poly(TMC); A] and poly(ethylene oxide) [PEO; B; number‐average molecular weight (M_n) = 5000] blocks [poly(TMC)‐b‐PEO] were synthesized via the ring‐opening polymerization of trimethylene carbonate (TMC) in the presence of monohydroxy PEO with stannous octoate as a catalyst. M_n of the resulting copolymers increased with increasing TMC content in the feed at a constant molar ratio of the monomer to the catalyst (monomer/catalyst = 125). The thermal properties of the AB diblock copolymers were investigated with differential scanning calorimetry. The melting temperature of the PEO blocks was lower than that of the homopolymer, and the crystallinity of the PEO block decreased as the length of the poly(TMC) blocks increased. The glass‐transition temperature of the poly(TMC) blocks was dependent on the diblock copolymer composition upon first heating. The static contact angle decreased sharply with increasing PEO content in the diblock copolymers. Compared with poly(TMC), poly(TMC)‐b‐PEO had a higher Young's modulus and lower elongation at break. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4819–4827, 2005     

Novel Thermoreversible Gelation of Biodegradable PLGA‐block‐PEO‐block‐PLGA Triblock Copolymers in Aqueous Solution

The BAB‐type triblock copolymers composed of a central poly(ethylene oxide) (PEO, M̄_nPEO = 1 000) block and two poly[(D ,L ‐lactic acid)‐co‐(glycolic acid)] end blocks with molecular weights between 900 and 1 600 exhibited an interesting phase transition behavior. The copolymer aqueous solution can form micelles with PLGA loops in the core and a PEO shell and groups of micelles because of bridging between micelles caused by the PLGA blocks with raising temperature. A possible micellar gelation mechanism was suggested.     

Synthesis and polymerization of styrene monomer carrying isothiocyanate moiety and its copolymerization with HEMA based on chemo‐selectivity to nucleophiles

Isothiocyanate is a very useful functional group for post‐polymerization modification by the reaction with amine or alcohol. An isothiocyanate monomer, 4‐vinylbenzyl isothiocyanate, was synthesized from 4‐vinylbenzyl chloride without using any harmful reagents such as thiophosgene and CS₂. The obtained monomer was successively polymerized by the conventional radical polymerization (AIBN, 1,4‐dioxane, 60 °C) to afford the corresponding polymer. The obtained polymer was characterized by ¹H NMR, FTIR, thermogravimetric analysis (TGA), and differential scanning calorimetry. In contrast to the isocyanate group, the isothiocyanate group was relatively tolerant to alcohols, and this character enabled us to synthesize a copolymer of 4‐vinyl benzylisothiocyanate and (2‐hydroxyethyl methacrylate). The copolymer is transformed into networked polymer by 1,8‐diazabicyclo[5.4.0]undec‐7‐ene as a promoter of the reaction between isothiocyanate and alcohol to afford thiocarbamate. The formation of networked polymer was characterized by FTIR and TGA. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5215–5220     

Synthesis and radical polymerization of styrene‐based monomer having a five‐membered cyclic carbonate structure

A styrene‐based monomer having a five‐membered cyclic carbonate structure, 4‐vinylbenzyl 2,5‐dioxoran‐3‐ylmethyl ether (VBCE), was prepared by lithium bromide‐catalyzed addition of carbon dioxide to 4‐vinylbenxyl glycidyl ether (VBGE). Radical polymerization of the obtained VBCE was carried out using 2,2′‐azobisisobutyronitrile as an initiator. PolyVBCE with number‐averaged molecular weight higher than 13,800 was obtained by a solution polymerization in N,N‐dimethylformamide, N,N‐dimethylacetamide, dimethyl sulfoxide, and methyl ethyl ketone. The glass transition temperature and 5 wt % decomposition temperature of the polyVBCE were determined to be 52 and 305 °C by differential scanning calorimetry and thermal gravimetry analysis, respectively. It was confirmed that a polymer consisting of the same VBCE repeating unit can be also obtained via chemical modification of polyVBGE, that is, a lithium‐bromide‐catalyzed addition of carbon dioxide to a polyVBGE prepared from a radical polymerization of VBGE. Further copolymerization of VBCE with styrene gave the corresponding copolymer in a high yield. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Preparation of amphiphilic ternary block copolymers with PEO as the middle block and the effect of PEO position on the glass transition temperature (Tg) of copolymers

The copolymer of polystyrene‐block‐poly(ethylene oxide)‐block‐poly (tert‐butyl acrylate) (PS‐b‐PEO‐b‐PtBA) was prepared, the synthesis process involved ring‐opening polymerization (ROP), nitroxide‐mediated polymerization (NMP), and atom transfer radical polymerization (ATRP), and 4‐hydroxyl‐2,2,6,6‐tetramethylpiperidinyl‐1‐oxy (HTEMPO) was used as parent compound. The PEO precursors with α‐hydroxyl‐ω‐2,2,6,6‐tetramethylpiperidinyl‐1‐oxy end groups(TEMPO‐PEO‐OH) were first obtained by ROP of EO using HTEMPO and diphenylmethylpotassium (DPMK) as the coinitiator. The TEMPO at one end of PEO chain mediated the polymerization of St using benzoyl peroxide as initiator. The resultant PS‐b‐PEO‐OH reacted further with 2‐bromoisobutyryl bromide and then initiated the polymerization of tBA in the presence of CuBr and PMDETA by ATRP. The ternary block copolymers PS‐b‐PEO‐b‐PtBA and intermediates were characterized by gel permeation chromatography, Fourier transform infrared, and nuclear magnetic resonance spectroscopy in detail. Differential scanning calorimetry measurements confirmed that the PS‐b‐PEO‐b‐PtBA with PEO as middle block can weaken the interaction between PS and PtBA blocks, the glass transition temperature (T_g) for two blocks were approximate to their corresponding homopolymers comparing with the PEO‐b‐PS‐b‐PtBA with PEO as the first block. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2624–2631, 2008     

聚芳醚酮与液晶聚酯多嵌段共聚物的合成表征

近年来,以热塑性聚合物为基体,热致液晶聚合物(TLCP)作为增强剂的高分子原位复合材料由于其具有优异的机械性能和优良的成型加工性能,已引起各国工作者的普遍关注和极大兴趣．然而由于自聚集和相分离作用的影响,大部分液晶聚合物与通常的热塑性聚合物基体基本不相容或弱相容,这对于提高原位复合材料的力学性能不利．     

Synthesis and characterization of linear ABC triblock copolymer of ethylene oxide,methyl methacrylate,and styrene

A well‐defined linear ABC triblock copolymer of ethylene oxide (EO), methyl methacrylate (MMA), and styrene (St) was prepared by sequential living anionic and photo‐induced charge transfer polymerization (CTP) using p‐aminophenol as parent compound. In the first step, the diblock copolymer of PEO‐b‐PMMA with a protected aniline end group at PEO end was prepared by initiating of phenoxo‐anion the polymerization of EO and MMA successively, then the diblock copolymer of PEO‐b‐PMMA via deprotection of aniline at PEO end constituted a binary initiation system with benzophenone (BP) by charge transfer complex mechanism to initiate the polymerization of St under UV‐irradiation. The GPC and NMR measurements support that in copolymerization, either in the first or second step, neither homopolymer nor side reactions, such as chain transfer or chain termination, was found. The effect of the concentration of PEO_a‐b‐PMMA and St, and the polarity of solvent on the polymerization rate (R_p) of CTP is discussed. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 825–833, 1999     

3,3'-双叠氮甲基环氧丁烷-3-叠氮甲基-3'-甲基环氧丁烷无规共聚物的合成与结构表征

以1,4-丁二醇/三氟化硼乙醚为引发体系, 利用阳离子开环共聚合方法合成了3,3'-双叠氮甲基环氧丁烷(BAMO)与3-叠氮甲基-3'-甲基环氧丁烷(AMMO)的无规共聚物, 探讨了以Lewis酸为催化剂时活性链端与活性单体相互竞争的聚合反应机理. 同时根据GPC结果分析了聚合反应温度对产物分子量和分子量分布的影响. 结果表明, 在15 ℃时产物分子量可控且分布较窄. 通过1H NMR和13C NMR对无规共聚物的共聚组成及微观序列结构进行了表征, 结果表明, 共聚组成中两单体的摩尔比接近于1:1, 与投料比一致; 交替度接近50%, BAMO与AMMO链段的平均序列长度为2, 其结构单元呈随机分布的状态.     

Atom transfer radical polymerization of styrenic ionic liquid monomers and carbon dioxide absorption of the polymerized ionic liquids

Polymeric forms of ionic liquids have many potential applications because of their high thermal stability and ionic nature. Two ionic liquid monomers, 1‐(4‐vinylbenzyl)‐3‐butyl imidazolium tetrafluoroborate (VBIT) and 1‐(4‐vinylbenzyl)‐3‐ butyl imidazolium hexafluorophosphate (VBIH), were synthesized through the quaternization of N‐butylimidazole with 4‐vinylbenzylchloride and a subsequent anion‐ exchange reaction with sodium tetrafluoroborate or potassium hexafluorophosphate. Copper‐mediated atom transfer radical polymerization was used to polymerize VBIT and VBIH. The effects of various initiator/catalyst systems, monomer concentrations, solvent polarities, and reaction temperatures on the polymerization were examined. The polymerization was well controlled and exhibited living characteristics when CuBr/1,1,4,7,10,10‐hexamethyltriethylenetetramine or CuBr/2,2′‐bipyridine was used as the catalyst and ethyl 2‐bromoisobutyrate was used as the initiator. Characterizations by thermogravimetric analysis, differential scanning calorimetry, and X‐ray diffraction showed that the resulting VBIT polymer, poly[1‐(4‐vinylbenzyl)‐3‐butyl imidazolium tetrafluoroborate] (PVBIT), was amorphous and had excellent thermal stability, with a glass‐transition temperature of 84 °C. The polymerized ionic liquids could absorb CO₂ as ionic liquids: PVBIT absorbed 0.30% (w/w) CO₂ at room temperature and 0.78 atm. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1432–1443, 2005     

Thermoresponsive poly(ionic liquid): Controllable RAFT synthesis,thermoresponse, and application in dispersion RAFT polymerization

The thermoresponsive poly(ionic liquid) of poly[1‐(4‐vinylbenzyl)‐3‐methylimidozolium tetrafluoroborate] trithiocarbonate (P[VBMI][BF₄]‐TTC) showing the soluble‐to‐insoluble phase transition in the methanol/water mixture at the upper critical solution temperature (UCST) was synthesized by solution RAFT polymerization and the synthesized P[VBMI][BF₄]‐TTC was employed as macro‐RAFT agent to mediate the RAFT polymerization under dispersion condition to afford the thermoresponsive diblock copolymer nanoparticles of poly[1‐(4‐vinylbenzyl)‐3‐methylimidozolium tetrafluoroborate]‐b‐polystyrene (P[VBMI][BF₄]‐b‐PS). The controllable solution RAFT polymerization was achieved as indicated by the linearly increasing polymer molecular weight with the monomer conversion and the narrow molecular weight distribution. The P[VBMI][BF₄]‐TTC macro‐RAFT agent mediated dispersion polymerization afforded the P[VBMI][BF₄]‐b‐PS nanoparticles, the size of which was uncorrelated with the polymerization degree of the P[VBMI][BF₄] block. Several parameters including the polymerization degree, the polymer concentration and the water content in the solvent of the methanol/water mixture were found to be correlated with the UCST of the poly(ionic liquid). The synthesized poly(ionic liquid) is believed to be a new thermos‐responsive polymer and will be useful in material science. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 945–954