聚合物假冠醚研究(VI) 以苯环为端基的[2,2,2]开链穴醚及其酚醛型聚合物的合成与吸附性能

以2-苯氧乙醇为起始原料,合成了以苯环为端基的[2,2,2]开链穴醚(三足体)及其酚醛型聚合物,测定了其对金属离子的吸附性能。结果表明,开链穴醚及其聚合物对Fe3+具有良好的选择吸附性能,吸附容量达1.74mmol/g(20℃)。同时测试了反应物的摩尔比、反应温度、Fe3+离子浓度和吸附时间对聚合物吸附Fe3+的影响。     

聚合物假冠醚研究(Ⅵ)以苯环为端基的[2,2,2]开链穴醚及其酚醛型聚合物的合成与吸附性能

以2-苯氧乙醇为起始原料,合成了以苯环为端基的[2,2,2]开链穴醚(三足体)及其酚醛型聚合物,测定了其对金属离子的吸附性能.结果表明,开链穴醚及其聚合物对Fe3 具有良好的选择吸附性能,吸附容量达1.74mmol/g(20℃).同时测试了反应物的摩尔比、反应温度、Fe3 离子浓度和吸附时间对聚合物吸附Fe3 的影响.     

二苯并三氧二氮穴醚及其Na(Ⅰ)、Cu(Ⅱ)和Co(Ⅱ)配合物的合成与表征

自从1969年Lchn等合成穴醚[2,2,2]似来.人们对穴醚的研究越来越感到兴趣.由于空腔效应,穴醚具有很强的配位能力和较高的选择性,它对于研究无机离子在生物体内的传输过程具有重要的意义,而且有可能用于离子的识别和分离.     

二苯并三氧二氮穴醚及其Na(Ⅰ)、Cu(Ⅱ)和Co(Ⅱ)配合物的合成与表征

自从1969年Lchn等合成穴醚[2,2,2]似来.人们对穴醚的研究越来越感到兴趣.由于空腔效应,穴醚具有很强的配位能力和较高的选择性,它对于研究无机离子在生物体内的传输过程具有重要的意义,而且有可能用于离子的识别和分离.本文报道3,4:9,10-二苯并-5,8,15-三氧杂-1,12-二氮杂-双环[10.5.3]十七烷(以下简称为L,结构式为及其Na(Ⅰ)、Cu(Ⅱ)和Co(Ⅱ)配合物.     

复合阴离子稀土穴醚配合物的分子和晶体结构研究

首次合成了稀土元素镱的异硫氰酸、硝酸复合阴离子穴醚(2,2,2)配合物H2Yb(NCS)~3(NO3)~2.H2O.(2,2,2)。测定了它的晶体结构及红外光谱, 发现Yb^3+没有进入穴醚空穴, 它通过H2O桥以氢键与穴醚的O原子结合。经研究认为, 分子中2个H^+结合在穴醚中2个N原子上。与Yb^3+配位的异硫氰酸根、硝酸根及分子形成八配位的三角十二面几何构型。晶体属单斜晶系, 空间群:P2~1/n。     

醚基功能化离子液体[MOEMIm]Cl和[EOEMIm]Cl热力学性质

通过核磁共振氢谱,核磁共振碳谱,元素分析和热重分析对醚基功能化的离子液体[MOEMIm]Cl和[EOEMIm]Cl进行了表征。在温度范围T=288.15–328.15 K内,测定了离子液体[MOEMIm]Cl和[EOEMIm]Cl的密度(ρ)、表面张力(γ)和折光率(nD)。根据这些实验数据,讨论并计算了离子液体[MOEMIm]Cl和[EOEMIm]Cl的体积性质。计算出离子液体[MOEMIm]Cl和[EOEMIm]Cl的摩尔表面吉布斯自由能(gs)、摩尔表面熵(s)、摩尔表面焓(h)、摩尔极化度(Rm)和摩尔极化率(αp),h均近似为一个常数说明这两种离子液体从内部到表面的过程是一个等库仑过程,同时这两种离子液体的Rm和αp均与温度无关。本文还用摩尔表面Gibbs自由能改进Lorentz-Lorenz方程并预测离子液体表面张力,预测值与实验值高度相关。     

离子液体[Emim]PF6-邻菲咯琳萃取回收废旧电池中镐、镍离子的研究

研究了疏水性离子液体[Emim] PF_6-邻菲咯琳萃取体系对废旧镍镉电池中镉、镍离子的萃取性能,考察了振荡时间、温度、平衡水相酸度和萃取剂用量时萃取性能的影响.在水相pH值为5.91、温度为80℃时,4.0mL4g/L的邻菲咯琳与3.0mL离子液[Emim] PF_6组成的萃取体系时废旧电池液中镉、镍离子萃取效果良好.同时研究了废旧离子液在不同时间及酸度下的反萃效果,在浓度为1.0mol/L的盐酸介质中反萃1h,镉、镍离子能较好地被反萃.     

一个测定铬的灵敏的新方法

痕量铬的测定,通常采用二苯氨基脲法,其摩尔吸光系数为3.4×10~4。但采用三苯甲烷类碱性染料乙基紫测定痕量铬(Ⅵ)尚未见文献报道。我们在实验中发现,在弱酸性介质中,Cr~+与菸酸和乙基紫能够生成易于被混合溶剂(苯:丁酮=4:1)萃取的蓝色缔合物,其摩尔吸光系数为8.01×10~4本文研究了该络合物的形成条件,共存离子的影响,络合物的组成。实验表明该法可用于合成试样中铬     

大环穴醚双铜叠氮配合物 [Cu~2(N~3)~2(C~1~6H~3~8N~6)](ClO~4)~2的合成和结 构

本文报道二价铜与叠氮、大环穴醚(C~1~6H~3~8N~6)配合物的合成和晶体结构。配合物组成为[Cu~2(N~3)~2(C~1~6H~3~8N~6)](ClO~4)~2,晶体属于空间群C~i^1-P1,晶胞参数a=17.669(10),b=13.355(5),c=6.414(3)︿;α=103.85(4),β=100.40(4),γ=71.30(3)ⅲ;对1870个反射精修的最后一致性因子R=0.088。此配合物中Cu(II)呈平面正方四配位结构形式,这在类似饱和大环穴醚双铜配合物中,还是首次发现。每个配位多面体由大环穴醚配体提供三个氮原子,叠氮离子提供一个氮原子,两个Cu(II)离子之间不存在叠氮桥,间距为5.12︿。     

大环穴醚双铜叠氮配合物 [Cu~2(N~3)~2(C~1~6H~3~8N~6)](ClO~4)~2的合成和结 构

本文报道二价铜与叠氮、大环穴醚(C_(16)H_(38)N_6)配合物的合成和晶体结构.配合物组成为[Cu_2(N_2)_2(C_(16)H_(38)N_3)](ClO_4)_2,晶体属于空间群C_1~1-PI,晶胞参数a=17.669(10).b=13.355(5),c=6.414(3)A;β=103.85(4),β=100.40(4),γ=71.30(3)°;对1870个反射精修的最后一致性因子R=0.088.此配合物中Cu(Ⅱ)呈平面正方四配位结构形式,这在类似饱和大环穴醚双铜配合物中,还是首次发现.每个配位多面体由大环穴醚配体提供三个氮原子,叠氮离子提供一个氮原子,两个Cu(Ⅱ)离子之间不存在叠氮桥,间距为5.12A.     

An Alternate [2×2] Grid Constructed Around TiO4N2 Units

The formation of a tetranuclear self-assembled species constructed around a TiO₄N₂ motif is reported. This aggregate is generated from Ti(OⁱPr)₄, 2,2’-bipyrimidine (bpym) and a bis-biphenol strand (L²H₄) where two 2,2’-biphenol units are connected with a biphenyl spacer. The solid-state structure of the [Ti₄(L²)₄(bpym)₄] architecture reveals the formation of an unprecedented chiral alternate [2×2] grid. In addition to the structural characterization of the [Ti₄(L²)₄(bpym)₄] architecture, geometry optimisation on various possible isomeric tetrameric assemblies ([2×2] grid, alternate [2×2] grid, circular helicate or cyclic hemihelicate) is performed using DFT calculations. These results confirm the higher stability of the alternate [2×2] grid over the other possible tetranuclear isomers and allow examining the replacement of the bpym ligands by two novel diimine chelates within the tetranuclear assembly (2,2’-bipyridine=bipy and 2,2’-bipyrazine=bipyraz). From this initial theoretical investigation, the competition between these three nitrogen ligands in the course of the self-assembly process is next evaluated. Overall, this investigation shows that the exclusive formation of the alternate [2×2] grid is driven by CH⋅⋅⋅N interactions.     

The electronic spectrum of (−)-s-(ps)-2,5,3',6'-tetrahydro[2.2]paracyclophane-2-carboxylic acid

A new, efficient route was used in the synthesis of [2,2]paracyclophane-2-carboxylic acid. The chiral acid was then resolved and the Birch reduction performed yielding one enantiomer of tetrahydro[2,2]paracyclophane-2-carboxylic acid. The UV spectrum of tetrahydro[2,2]paracyclophane-2-carboxylic acid in isopentane shows one absorption at 206 nm (?_max=5271). There are three bands observed in the CD spectrum in isopentane at 236 nm ([θ] = 1.8 × 10⁴), 201 nm ([θ]=-16×10⁴) and a positive band indicated below 180 nm but not observed, in ethanol the CD spectrum exhibits a band at 205 nm ([θ]= 1.5×10⁴) and the UV spectrum shows a band at 208 nm (?_max=5915). The bands were assigned and possible reasons for the occurrence of a π→π^* transition at unexpectedly long wavelengths are discussed.     

Synthesis of a novel [60]fullerene pearl-necklace polymer,poly(4,4′-carbonylbisphenylene trans-2-[60]fullerenobisacetamide)

A novel [60]fullerene pearl-necklace polymer, poly(4,4′-carbonylbisphenylene trans-2-[60]fullerenobisacetamide), was synthesized by a direct polycondensation of trans-2-[60]fullerenobisacetic acid with 4,4′-diaminobenzophenone in the presence of large excesses of triphenyl phosphite and pyridine. In the present polymer, [60]fullerene pearls and diamine linkers were attached to each other by methano-carbonyl connectors. The molecular weight M_w of the polymer was determined to be 4.5 × 10⁴ on the basis of the TOF-MS, and a GPC analysis of the polymer using polystyrene standards showed a weight-average molecular weight of 5.3 × 10⁴. The UV-vis spectrum of the resultant polymer in N,N-dimethylacetamide (DMAc) exhibited a broad absorption (λ_max 310 nm, ε 2.1 × 10⁴ L · mol⁻¹ · cm⁻¹), tailing to longer wavelengths, and a fluorenscence peak centered at 550 nm was observed in DMAc. There was observed a large downfield-shift of the cyclopropane methyne proton in the ¹H-NMR spectra from 4.57 ppm of the ethyl ester to 5.78 ppm of the polyamide. These observations indicate that the present polyamide is a high-molecular-weight [60]fullerene pearl-necklace polymer and that the cyclopropane rings are efficient to make the [60]fullerene cages and the diamine components conjugatable. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3632–3637, 1999     

Uranyl Microsensor: An Asymmetric Potentiometric Membrane Sensor Based on a New Calix[4]arene

The first asymmetric potentiometric UO₂(II) microsensor is introduced. 5,11,17,23-tetra-tertio butyl(25,27),-bis)2-)n-]2-hydroxy-5-dinitridphenilonitrilidine) amino etoxy(26,28)-di hydroxy calix[4]arene (HAECA) was synthesized. It was found that HAECA can be used as an excellent ionophore in construction of UO₂(II) microsensor. The best performance was obtained with a membrane composition containing 20% PVC, 73% dibutyl phthalate, 5% HAECA, and 2% sodium tetraphenyl borate. The proposed microsensor exhibits a Nernstian slope of 28.5 ± 0.3 mV per decade over a wide concentration range of 1.0 ×10^?10–1.0 × 10^?4 M and a detection limit of 6.0 × 10^?11 M. The potentiometric response of the sensor is independent to the pH of the solution in the range of 2.2–3.6.     

Homooxacalix[3]arene Derivatives as Ionophores for Serotonin‐Selective Membrane Electrodes

Homooxacalix[3]arene derivatives are effective ionophores for constructing serotonin‐selective membrane electrodes. An electrode based on one of the derivatives, tris(methoxyphenylpropyloxy)hexahomooxacalix[3]arene‐triethyl ether, with potassium tetrakis(p‐chlorophenyl)borate (20 mol% relative to the ionophore) as an ionic additive and bis(2‐ethylhexyl) sebacate as a solvent mediator in a poly(vinyl chloride) membrane matrix, displayed much better selectivity for serotonin than for various organic ammonium ions and inorganic cations. The electrode exhibited a near‐Nernstian response to serotonin in the concentration range of 2×10^?4 to 1×10^?2 M with a slope of 56.4 mV per concentration decade in physiological saline containing 150 mM NaCl and 10 mM Na₂HPO₄/NaH₂PO₄ (pH 7.4). The limit of the detection was 8×10^?5 M. The selectivity pattern of this electrode was quite different from that of an electrode using calix[6]arene‐hexaacetic acid hexaethyl ester, a well‐known ionophore for primary organic ammonium ions, which did not induce an enhanced response to serotonin. The developed electrode was used for the active loading of serotonin in liposomes induced by transmembrane pH gradients.     

Analytical application of poly [dibenzo-18-crown-6] for chromatographic separation of thorium(IV) from uranium(VI) and other elements in glycine medium

A selective and effective chromatographic separation method for thorium(IV) has been developed by using poly [dibenzo-18-crown-6] as stationary phase. The separations are carried out from glycine medium. The sorption of thorium(IV) was quantitative from 1 × 10^?2 to 1 × 10^?4 M glycine. The elution of thorium(IV) was quantitative with 2.0–8.0 M HCl, 4.0–7.0 M HBr, 1.0–2.0 M HClO₄ and 5.0 M H₂SO₄. The capacity of poly [dibenzo-18-crown-6] for thorium(IV) was found to be 0.215 ± 0.01 mmol/g of crown polymer. The effect of concentration of glycine, metal ion, foreign ion and eluents has been studied. Thorium(IV) was separated from a number of cations in ternary as well as in multicomponent mixtures. The applicability of the proposed method was checked for the determination of thorium(IV) in real as well as geological sample. The method is simple, rapid, and selective with good reproducibility (approximately ±2 %).     

Iron(III) selective fluorescence probe based on perylene tetracarboxylic diimide

Responses of organic fluorophore, perylenediimide derivative N,N′-di[3-[2-(3-thienyl)ethyl]phenyl]perylene-3,4,9,10-bis-(dicarboxyimide) (PDI1) was investigated in polymer matrix of polyvinyl chloride (PVC) by emission spectrometry. Its response to Fe(III) ions was evaluated in terms of the effect of pH. The properties of time dependent response, reversibility, limit of detection, linear concentration range for the metal ion and repeatability characteristics of the sensing element also have been studied. The offered sensor exhibited remarkable fluorescence intensity quenching at pH 6.0 in the concentration range of 1 × 10^?6 to 2.5 × 10^?3 M Fe(III) ions. The reproducibility of the sensor membrane was investigated by alternately changing the solution between 1 × 10^?4 M Fe(III) in Na₂HPO₄ (4 × 10^?2 M) and NaH₂PO₄ buffer (2 × 10^?3 M).     

On‐line Liquid‐liquid Extraction Coupled to a Reversed Micellar‐mediated Chemiluminescence Detection System: Application to the Determination of Amino/Nitroaromatic Compounds

A simple and fast flow method for the trace level determination of p‐toluidine, 2‐methyl‐5‐nitroaniline, and 2,4‐dinitroaniline in aqueous samples is reported. These amino/nitroaromatics are related to trinitrotoluene (TNT) and appear during the degradation process of the explosive. The chemical principles of ion‐pair formation and liquid‐liquid extraction are applied: In aqueous acidic medium, the protonated analyte [HA]⁺ makes an ion‐pair with the tetrachloroaurate(III) ion, followed by on‐line ion‐pair extraction into the dichloromethane carrier used. After membrane separation, the CH₂Cl₂ containing the ion‐pair, [HA]⁺[AuCl₄]⁻, is mixed with the reversed micellar luminescent reagent of luminol (in 0.3 M Na₂CO₃) prepared from cetyl‐trimethylammonium chloride in CH₂Cl₂‐cyclohexane and the [AuCl₄⁻‐luminol chemiluminescence (CL) output is recorded. The detection limits (S/N> 3) are: p‐toluidine, 1.0 × 10⁻⁴M; 2‐methyl‐5‐nitroaniline, 1.0 × 10⁻⁷ M; 2,4‐dinitroaniline, 1.0 × 10⁻⁷ M, while the calibration curves are linear between 1.0 × 10⁻⁴ — 1.0 × 10⁻² M for all the compounds. Although spectral studies indicated the formation and extraction of a very small amount of the ion‐pair species, the reversed micellar‐mediated CL detection system provides an alternative procedure for the determination of degradation products of the explosive TNT in environmental aqueous samples.     

Zur frage transanularer II-II-wechselwirkungen im [2.2]metacyclophan, [2.2]Paracyclophan und 2,2′-spirobiindan

Concerning the question of transanular II-II-interactions in [2.2]metacyclophane, [2.2]paracyclophane and 2,2′-spirobiindane.From the quotient of the two dissociation constants (K₁/K₂) of [2.2]metacyclophane-bis-chromtricarbonyl (9·0 ± 1·9) it was concluded that there are no transanular II-II-interactions between the two benzene rings. The corresponding values for the bis-chromtricarbonyl-complexes of 2,2′-spirobiindane and [2.2]paracyclophane are 8·0 ± 1·5 and 10⁴, resp. These results are supported by IR-spectroscopical data of the CO-frequencies of the Cr(CO)₃-complexes of [2.2]metacyclophane and some derivatives, of 2,2′-spirobiindane and [2.2]paracyclophane.Moreover, UV-spectroscopic studies of tetracyanoethylene complexes of arenes are shown to be insignificant with regard to transanular II-II-interactions.     

Ionophoric Properties of [14]Tetraazaannulene Derivatives and Substituent Effect on the Cation‐selectivity

[14]Tetraazaannulene derivatives 1–4 with various substituents were synthesized as ion recognition compounds. All solvent polymeric membrane electrodes incorporating [14]tetraazaannulene derivatives 1–4 showed rapid response for the Cu²⁺ ion and exhibited excellent selectivity over other mono‐ and divalent cations such as Ag⁺ and Ni²⁺ ions. The solvent polymeric membrane electrode based on [14]tetraazaannulene derivative 1 has a linear response to the Cu²⁺ ion from 5.01 × 10⁻⁷ – 2.63 × 10⁻⁴ M with a slope of 29.56 mV per decade. DFT calculations showed that the selectivities for the Cu²⁺ ion of the ISEs based on [14]tetraazaannulene derivatives 1–4 depended on both their topological and electrostatic properties caused by the introduced substituents.