Ring Size Effects on Multi‐Stimuli Responsive Luminescent Properties of Cyclic Amine Substituted β‐Diketones and Difluoroboron Complexes

Emissive β‐diketones (bdks) and difluoroboron complexes (BF₂bdks) show multi‐stimuli responsive luminescence in both solution and the solid state. A series of bdk ligands and boron coordinated dyes were synthesized with different cyclic amine substituents in the 4‐position to explore ring size effects on various luminescent properties, including solvatochromism, viscochromism, aggregation‐induced emission (AIE), mechanochromic luminescence (ML) and halochromism. Red‐shifted absorption and emission were observed in CH₂Cl₂ for both bdk ligands and boron dyes with increasing substituent ring size. The compounds displayed bathochromic emission in more polar solvents, and higher fluorescence intensity in more viscous media. The AIE compounds exhibited enhanced emission when aggregated. For solid‐state properties, a large emission wavelength shift was shown for the piperidine substituted bdk after melt quenching on weighing paper. Large blue‐shifted emissions were observed in all the boron dye spin cast films after trifluoroacetic acid vapor annealing, and the original emissions were partially recovered after triethylamine vapor treatment.     

Color‐Tunable Solid‐State Fluorescence Emission from Carbazole‐Based BODIPYs

Several carbazole‐based boron dipyrromethene (BODIPY) dyes were synthesized by organometallic approaches. Thiazole, benzothiazole, imidazole, benzimidazole, triazole, and indolone substituents were introduced at the 1‐position of the carbazole moiety, and boron complexation of each dipyrrin generated the corresponding compounds 1 , 2 a , and 3 – 6 . The properties of these products were investigated by UV/Vis and fluorescence spectroscopy, cyclic voltammetry, X‐ray crystallography, and DFT calculations. These compounds exhibited large Stokes shifts, and compounds 1 , 2 a , and 3 – 5 fluoresced both in solution and in the solid state. Complex 2 a showed the highest fluorescence quantum yield (Φ_F) in the solid state, therefore boron complexes of the carbazole–benzothiazole hybrids 2 b – f , which had several different substituents, were prepared and the effects of the substituents on the photophysical properties of the compounds were examined. The fluorescence properties showed good correlation with the results of crystal‐packing analyses, and the dyes exhibited color‐tunable solid‐state fluorescence.     

N‐Annulated Perylene‐Substituted and Fused Porphyrin Dimers with Intense Near‐Infrared One‐Photon and Two‐Photon Absorption

Fusion of two N‐annulated perylene (NP) units with a fused porphyrin dimer along the S₀–S₁ electronic transition moment axis has resulted in new near‐infrared (NIR) dyes 1 a / 1 b with very intense absorption (ε>1.3×10⁵ M ^?1 cm^?1) beyond 1250 nm. Both compounds displayed moderate NIR fluorescence with fluorescence quantum yields of 4.4×10^?6 and 6.0×10^?6 for 1 a and 1 b , respectively. The NP‐substituted porphyrin dimers 2 a / 2 b have also been obtained by controlled oxidative coupling and cyclodehydrogenation, and they showed superimposed absorptions of the fused porphyrin dimer and the NP chromophore. The excited‐state dynamics of all of these compounds have been studied by femtosecond transient absorption measurements, which revealed porphyrin dimer‐like behaviour. These new chromophores also exhibited good nonlinear optical susceptibility with large two‐photon absorption cross‐sections in the NIR region due to extended π‐conjugation. Time‐dependent density functional theory calculations have been performed to aid our understanding of their electronic structures and absorption spectra.     

White Emitters by Tuning the Excited‐State Intramolecular Proton‐Transfer Fluorescence Emission in 2‐(2′‐Hydroxybenzofuran)benzoxazole Dyes

The synthesis, structural, and photophysical properties of a new series of original dyes based on 2‐(2′‐hydroxybenzofuran)benzoxazole (HBBO) is reported. Upon photoexcitation, these dyes exhibit intense dual fluorescence with contribution from the enol (E*) and the keto (K*) emission, with K* being formed through excited‐state intramolecular proton transfer (ESIPT). We show that the ratio of emission intensity E*/K* can be fine‐tuned by judiciously decorating the molecular core with electron‐donating or ‐attracting substituents. Push–pull dyes 9 and 10 functionalized by a strong donor (nNBu₂) and a strong acceptor group (CF₃ and CN, respectively) exhibit intense dual emission, particularly in apolar solvents such as cyclohexane in which the maximum wavelength of the two bands is the more strongly separated. Moreover, all dyes exhibit strong solid‐state dual emission in a KBr matrix and polymer films with enhanced quantum yields reaching up to 54 %. A wise selection of substituents led to white emission both in solution and in the solid state. Finally, these experimental results were analyzed by time‐dependent density functional theory (TD‐DFT) calculations, which confirm that, on the one hand, only E* and K* emission are present (no rotamer) and, on the other hand, the relative free energies of the two tautomers in the excited state guide the ratio of the E*/K* emission intensities.     

First Highly Efficient and Photostable E and C Derivatives of 4,4‐Difluoro‐4‐bora‐3a,4a‐diaza‐s‐indacene (BODIPY) as Dye Lasers in the Liquid Phase,Thin Films,and Solid‐State Rods

A new library of E‐ and C‐4,4‐difluoro‐4‐bora‐3a,4a‐diaza‐s‐indacene (BODIPY) derivatives has been synthesized through a straightforward protocol from commercially available BODIPY complexes, and a systematic study of the photophysical properties and laser behavior related to the electronic properties of the B‐substituent group (alkynyl, cyano, vinyl, aryl, and alkyl) has been carried out. The replacement of fluorine atoms by electron‐withdrawing groups enhances the fluorescence response of the dye, whereas electron‐donor groups diminish the fluorescence efficiency. As a consequence, these compounds exhibit enhanced laser action with respect to their parent dyes, both in liquid solution and in the solid phase, with lasing efficiencies under transversal pumping up to 73 % in liquid solution and 53 % in a solid matrix. The new dyes also showed enhanced photostability. In a solid matrix, the derivative of commercial dye PM597 that incorporated cyano groups at the boron center exhibited a very high lasing stability, with the laser emission remaining at the initial level after 100 000 pump pulses in the same position of the sample at a 10 Hz repetition rate. Distributed feedback laser emission was demonstrated with organic films that incorporated parent dye PM597 and its cyano derivative. The films were deposited onto quartz substrates engraved with appropriate periodical structures. The C derivative exhibited a laser threshold lower than that of the parent dye as well as lasing intensities up to three orders of magnitude higher.     

Two‐Photon‐Induced Fluorescence in New π‐Expanded Diketopyrrolopyrroles

Structurally unique π‐expanded diketopyrrolopyrroles (EDPP) were designed and synthesized. Strategic placement of a fluorene scaffold at the periphery of a diketopyrrolopyrrole through tandem Friedel–Crafts‐dehydration reactions resulted in dyes with supreme solubility. The structure of the dyes was confirmed by X‐ray crystallography verifying a nearly flattened arrangement of the ten fused rings. Despite the extended ring system, the dye still preserved good solubility and was further functionalized by using Pd‐catalyzed coupling reactions, such as the Buchwald–Hartwig amination. Photophysical studies of these new functional dyes revealed that they possess enhanced properties when compared with expanded DPPs in terms of two‐photon absorption cross‐section. It is further demonstrated that in addition to the initial diacetals, the final electrophilic cyclization step can also be applied to diketones. By placing two amine groups at peripheral positions of the resulting dyes, values of two‐photon absorption cross‐section on the level of 2000 GM around 1000 nm were achieved, which in combination with high fluorescence quantum yield (Φ_fl), generated a two‐photon brightness of approximately 1600 GM. These characteristics in combination with strong red emission (665 nm) make these new π‐expanded diketopyrrolopyrroles of major promise as two‐photon dyes for bioimaging applications. Finally, the corresponding N‐alkylated DPPs displayed a solid‐state fluorescence.     

Synthesis and Fluorescence Properties of Pyrimidine‐Based Diboron Complexes with Donor–π–Acceptor Structures

Pyrimidine‐based diboron complexes bearing β‐iminoenolate ligands and phenyl groups as bulky substituents on the boron atoms were synthesized as novel fluorescent dyes, and their fluorescence properties were investigated in solution and in the solid state. The diboron complexes with donor–π–acceptor structures showed positive solvatochromism in the fluorescence spectra. The cyano derivative exhibited the most dramatic redshift of the fluorescence maximum F_max with increasing solvent polarity (from 551 nm in n‐hexane to 710 nm in acetonitrile). The diboron complexes showed solid‐state fluorescence in the range of 578–706 nm with fluorescence quantum yields of 0.06–0.28. Additionally, the trifluoromethyl derivative exhibited solvent‐inclusion solid‐state fluorescence. The trifluoromethyl derivative formed toluene‐inclusion and ethyl acetate‐inclusion crystals. The toluene‐inclusion crystal (F_max=668 nm, Φ_f=0.16) showed a blueshifted F_max and higher Φ_f value compared to the original trifluoromethyl derivative (F_max=694 nm, Φ_f=0.08) in the solid state. On the other hand, the F_max (709 nm) and Φ_f (0.04) values of the ethyl acetate‐inclusion crystal were redshifted and lower, respectively.     

Highly near‐infrared emissive boron di(iso)indomethene‐based polymer: Drastic change from deep‐red to near‐infrared emission via quantitative polymer reaction

It is challenging to realize the near‐infrared (NIR) emission with large brightness and sharp spectra from the conjugated polymers. In this study, we demonstrate the strategy for receiving strong and pure NIR emission from polymeric materials using organoboron complexes and the modification after polymerization. A series of NIR emissive conjugated polymers with boron di(iso)indomethenes (BODINs) and fluorene or bithiophene were synthesized by Suzuki–Miyaura coupling reaction. The obtained polymers exhibited high emissions in the range from deep‐red to NIR region (quantum yields: ?_PL = 0.40–0.79, full width at half maximum height: Δλ_1/2 = 660–940 cm^?1, emission maxima: λ_PL = 686–714 nm). Next, the demethylation of the BODIN‐based polymer with o‐methoxyphenyl groups was carried out. The transformation of the polymer structure quantitatively proceeded via efficient intramolecular crosslinking through the intermediary of the boron atom. Finally, the resulting polymer showed both drastically larger red‐shifted and sharper photoluminescence spectrum than that of the parent polymer with deep‐red emission (?_PL = 0.37, Δλ_1/2 = 460 cm^?1, λ_PL = 758 nm). © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

2,5‐Difluorenyl‐Substituted Siloles for the Fabrication of High‐Performance Yellow Organic Light‐Emitting Diodes

2,3,4,5‐Tetraarylsiloles are a class of important luminogenic materials with efficient solid‐state emission and excellent electron‐transport capacity. However, those exhibiting outstanding electroluminescence properties are still rare. In this work, bulky 9,9‐dimethylfluorenyl, 9,9‐diphenylfluorenyl, and 9,9′‐spirobifluorenyl substituents were introduced into the 2,5‐positions of silole rings. The resulting 2,5‐difluorenyl‐substituted siloles are thermally stable and have low‐lying LUMO energy levels. Crystallographic analysis revealed that intramolecular π–π interactions are prone to form between 9,9′‐spirobifluorene units and phenyl rings at the 3,4‐positions of the silole ring. In the solution state, these new siloles show weak blue and green emission bands, arising from the fluorenyl groups and silole rings with a certain extension of π conjugation, respectively. With increasing substituent volume, intramolecular rotation is decreased, and thus the emissions of the present siloles gradually improved and they showed higher fluorescence quantum yields (Φ_F=2.5–5.4 %) than 2,3,4,5‐tetraphenylsiloles. They are highly emissive in solid films, with dominant green to yellow emissions and good solid‐state Φ_F values (75–88 %). Efficient organic light‐emitting diodes were fabricated by adopting them as host emitters and gave high luminance, current efficiency, and power efficiency of up to 44 100 cd m^?2, 18.3 cd A^?1, and 15.7 lm W^?1, respectively. Notably, a maximum external quantum efficiency of 5.5 % was achieved in an optimized device.     

Near‐Infrared‐III‐Absorbing and ‐Emitting Dyes: Energy‐Gap Engineering of Expanded Porphyrinoids via Metallation

The synthesis of organometallic complexes of modified 26π‐conjugated hexaphyrins with absorption and emission capabilities in the third near‐infrared region (NIR‐III) is described. Symmetry alteration of the frontier molecular orbitals (MOs) of bis‐Pd^II and bis‐Pt^II complexes of hexaphyrin via N‐confusion modification led to substantial metal d_π–p_π interactions. This MO mixing, in turn, resulted in a significantly narrower HOMO–LUMO energy gap. A remarkable long‐wavelength shift of the lowest S₀→S₁ absorption beyond 1700 nm was achieved with the bis‐Pt^II complex, t ‐Pt₂‐3 . The emergence of photoacoustic (PA) signals maximized at 1700 nm makes t ‐Pt₂‐3 potentially useful as a NIR‐III PA contrast agent. The rigid bis‐Pd^II complexes, t ‐Pd₂‐3 and c ‐Pd₂‐3 , are rare examples of NIR emitters beyond 1500 nm. The current study provides new insight into the design of stable, expanded porphyrinic dyes possessing NIR‐III‐emissive and photoacoustic‐response capabilities.     

Polymorph‐Dependent Solid‐State Fluorescence and Selective Metal‐Ion‐Sensor Properties of 2‐(2‐Hydroxyphenyl)‐4(3H)‐quinazolinone

2‐(2‐Hydroxy‐phenyl)‐4(3H)‐quinazolinone (HPQ), an organic fluorescent material that exhibits fluorescence by the excited‐state intramolecular proton‐transfer (ESIPT) mechanism, forms two different polymorphs in tetrahydrofuran. The conformational twist between the phenyl and quinazolinone rings of HPQ leads to different molecular packing in the solid state, giving structures that show solid‐state fluorescence at 497 and 511 nm. HPQ also shows intense fluorescence in dimethyl formamide (DMF) solution and selectively detects Zn²⁺ and Cd²⁺ ions at micromolar concentrations in DMF. Importantly, HPQ not only detects Zn²⁺ and Cd²⁺ ions selectively, but it also distinguishes between the metal ions with a fluorescence λ_max that is blue‐shifted from 497 to 420 and 426 nm for Zn²⁺ and Cd²⁺ ions, respectively. Hence, tunable solid‐state fluorescence and selective metal‐ion‐sensor properties were demonstrated in a single organic material.     

Boron Difluoride Curcuminoid Fluorophores with Enhanced Two‐Photon Excited Fluorescence Emission and Versatile Living‐Cell Imaging Properties

The synthesis of boron difluoride complexes of a series of curcuminoid derivatives containing various donor end groups is described. Time‐dependent (TD)‐DFT calculations confirm the charge‐transfer character of the second lowest‐energy transition band and ascribe the lowest energy band to a “cyanine‐like” transition. Photophysical studies reveal that tuning the donor strength of the end groups allows covering a broad spectral range, from the visible to the NIR region, of the UV–visible absorption and fluorescence spectra. Two‐photon‐excited fluorescence and Z‐scan techniques prove that an increase in the donor strength or in the rigidity of the backbone results in a considerable increase in the two‐photon cross section, reaching 5000 GM, with predominant two‐photon absorption from the S₀–S₂ charge‐transfer transition. Direct comparisons with the hemicurcuminoid derivatives show that the two‐photon active band for the curcuminoid derivatives has the same intramolecular charge‐transfer character and therefore arises from a dipolar structure. Overall, this structure–relationship study allows the optimization of the two‐photon brightness (i.e., 400–900 GM) with one dye that emits in the NIR region of the spectrum. In addition, these dyes demonstrate high intracellular uptake efficiency in Cos7 cells with emission in the visible region, which is further improved by using porous silica nanoparticles as dye vehicles for the imaging of two mammalian carcinoma cells type based on NIR fluorescence emission.     

Rational Design of Emissive NIR‐Absorbing Chromophores: RhIII Porphyrin‐Aza‐BODIPY Conjugates with Orthogonal Metal–Carbon Bonds

The facile synthesis of Group 9 Rh^III porphyrin‐aza‐BODIPY conjugates that are linked through an orthogonal Rh?C(aryl) bond is reported. The conjugates combine the advantages of the near‐IR (NIR) absorption and intense fluorescence of aza‐BODIPY dyes with the long‐lived triplet states of transition metal rhodium porphyrins. Only one emission peak centered at about 720 nm is observed, irrespective of the excitation wavelength, demonstrating that the conjugates act as unique molecules rather than as dyads. The generation of a locally excited (LE) state with intramolecular charge‐transfer (ICT) character has been demonstrated by solvatochromic effects in the photophysical properties, singlet oxygen quantum yields in polar solvents, and by the results of density functional theory (DFT) calculations. In nonpolar solvents, the Rh^III conjugates exhibit strong aza‐BODIPY‐centered fluorescence at around 720 nm (Φ_F=17–34 %), and negligible singlet oxygen generation. In polar solvents, enhancements of the singlet‐oxygen quantum yield (Φ_Δ=19–27 %, λ_ex=690 nm) have been observed. Nanosecond pulsed time‐resolved absorption spectroscopy confirms that relatively long‐lived triplet excited states are formed. The synthetic methodology outlined herein provides a useful strategy for the assembly of functional materials that are highly desirable for a wide range of applications in material science and biomedical fields.     

3,14‐Bis(p‐nitrophenyl)‐17,17‐dipentyltetrabenzo[a,c,g,i]‐fluorene: A New Fluorophore Displaying Both Remarkable Solvatochromism and Crystalline‐Induced Emission

A series of 17,17‐dialkyl‐3,14‐diaryltetrabenzofluorenes were efficiently prepared by using Suzuki–Miyaura cross‐coupling reactions of the corresponding 3,14‐dibromo derivatives. Studies of the unique fluorescence properties of these compounds showed that they display intense blue to yellow fluorescence with high quantum yields in the solution state and blue to orange fluorescence with moderate quantum yields in the solid state. In addition, the fluorescence wavelength of the bis(p‐nitrophenyl) derivative is remarkably solvent‐dependent in a manner that correlates with the solvent polarity parameter E_T(30). The results of density function theory calculations suggest that the intramolecular charge‐transfer character of the HOMO–LUMO transition is responsible for the large solvent effect. Moreover, addition of water to a tetrahydrofuran (THF) solution of this compound leads to quenching of the yellow fluorescence owing to an increase in the solvent polarity. However, when the amount of water fraction exceeds 70 %, a new fluorescence band appears at the same orange‐red emission wavelength as that of the solid‐state fluorescence. This observation suggests the occurrence of a crystallization‐induced emission (CIE) phenomenon in highly aqueous THF.     

A Computational and Experimental Study of Thieno[3,4‐b]thiophene as a Proaromatic π‐Bridge in Dye‐Sensitized Solar Cells

Four D ‐π‐A dyes (D=donor, A=accpetor) based on a 3,4‐thienothiophene π‐bridge were synthesized for use in dye‐sensitized solar cells (DSCs). The proaromatic building block 3,4‐thienothiophene is incorporated to stabilize dye excited‐state oxidation potentials. This lowering of the excited‐state energy levels allows for deeper absorption into the NIR region with relatively low molecular weight dyes. The influence of proaromatic functionality is probed through a computational analysis of optimized bond lengths and nucleus independent chemical shifts (NICS) for both the ground‐ and excited‐ states. To avoid a necessary lowering of the TiO₂ semiconductor conduction band (CB) to promote efficient dye–TiO₂ electron injection, strong donor functionalities based on triaryl‐ and diarylamines are employed in the dye designs to raise both the ground‐ and excited‐state oxidation potentials of the dyes. Solubility, aggregation, and TiO₂ surface protection are addressed by examining an ethylhexyl alkyl chain in comparison to a simple ethyl chain on the 3,4‐thienothiophene bridge. Power conversion efficiencies of up to 7.8 % are observed.     

Water‐Soluble Phospholo[3,2‐b]phosphole‐P,P′‐Dioxide‐Based Fluorescent Dyes with High Photostability

We recently reported that fluorescent dye PB430, which consisted of a 2‐phenyl‐substituted benzophosphole P‐oxide skeleton that was reinforced by a methylene bridge, showed pronounced photostability and, thus, high utility for applications in super‐resolution stimulated emission depletion (STED) microscopy. Herein, we replaced the methylene bridge with another P=O group to 1) investigate the role of the bridging moieties; and 2) further modulate the fluorescence properties of this skeleton. We synthesized a series of phospholo[3,2‐b]phosphole‐based dyes—trans‐PO‐PB430, cis‐PO‐PB430, and trans‐PO‐PB460—all of which showed sufficient water solubility. Moreover, trans‐PO‐PB430 and trans‐PO‐PB460 exhibited intense green and orange fluorescence, respectively, and a high photostability that was comparable to that of PB430. In contrast, cis‐PO‐PB430 underwent rapid photobleaching upon continuous photoirradiation, which demonstrated the importance of steric shielding of the polycyclic skeleton by the substituents on the bridging moieties. The fluorescence properties of these dyes were insensitive to concentration, pH value, and polarity changes of the environment in solution. In addition, even in the solid state, these dyes showed strong green to orange emissions. These results demonstrate the potential utility of trans‐PO‐PB430 and trans‐PO‐PB460 as highly photostable fluorescent dyes.     

A three‐dimensional CdII coordination framework: poly[di‐μ2‐aqua‐{μ2‐1,4‐bis[(1H‐1,2,4‐triazol‐1‐yl)methyl]benzene‐κ2N4:N4′}di‐μ3‐terephthalato‐κ3O:O′:O′′‐dicadmium(II)]

The title Cd^II coordination polymer, [Cd(C₁₀H₈O₄)(C₁₂H₁₂N₆)_0.5(H₂O)]_n, has been obtained by the hydrothermal method and studied by single‐crystal X‐ray diffraction, elemental analysis, thermogravimetric analysis, IR spectroscopy and fluorescence spectroscopy. The compound forms a novel three‐dimensional framework with 3,8‐connected three‐dimensional binodal {4.5²}₂{4².5¹⁰.6¹².7.8³} topology. An investigation of its photoluminescence properties shows that the compound exhibits a strong fluorescence emission in the solid state at room temperature.     

A two‐dimensional coordination polymer: poly[diaqua(μ4‐4,4′‐oxydibenzoato)(μ2‐4,4′‐oxydibenzoato)dilead(II)]

In a new two‐dimensional coordination polymer, [Pb(C₁₄H₈O₅)(H₂O)]_n, the asymmetric unit consists of a Pb^II cation, two halves of two crystallographically distinct fully deprotonated 4,4′‐oxydibenzoate ligands and one aqua ligand. Single‐crystal X‐ray diffraction analysis reveals that the compound is a coordination polymer with the point symbol {5³}₂{5⁴.8²}. In addition, it exhibits a strong fluorescence emission in the solid state at room temperature.     

Masked Rhodamine Dyes of Five Principal Colors Revealed by Photolysis of a 2‐Diazo‐1‐Indanone Caging Group: Synthesis,Photophysics, and Light Microscopy Applications

Caged rhodamine dyes (Rhodamines NN) of five basic colors were synthesized and used as “hidden” markers in subdiffractional and conventional light microscopy. These masked fluorophores with a 2‐diazo‐1‐indanone group can be irreversibly photoactivated, either by irradiation with UV‐ or violet light (one‐photon process), or by exposure to intense red light (λ～750 nm; two‐photon mode). All dyes possess a very small 2‐diazoketone caging group incorporated into the 2‐diazo‐1‐indanone residue with a quaternary carbon atom (C‐3) and a spiro‐9H‐xanthene fragment. Initially they are non‐colored (pale yellow), non‐fluorescent, and absorb at λ=330–350 nm (molar extinction coefficient (ε)≈10⁴ M^?1 cm^?1) with a band edge that extends to about λ=440 nm. The absorption and emission bands of the uncaged derivatives are tunable over a wide range (λ=511–633 and 525–653 nm, respectively). The unmasked dyes are highly colored and fluorescent (ε= 3–8×10⁴ M^?1 cm^?1 and fluorescence quantum yields (?)=40–85 % in the unbound state and in methanol). By stepwise and orthogonal protection of carboxylic and sulfonic acid groups a highly water‐soluble caged red‐emitting dye with two sulfonic acid residues was prepared. Rhodamines NN were decorated with amino‐reactive N‐hydroxysuccinimidyl ester groups, applied in aqueous buffers, easily conjugated with proteins, and readily photoactivated (uncaged) with λ=375–420 nm light or intense red light (λ=775 nm). Protein conjugates with optimal degrees of labeling (3–6) were prepared and uncaged with λ=405 nm light in aqueous buffer solutions (?=20–38 %). The photochemical cleavage of the masking group generates only molecular nitrogen. Some 10–40 % of the non‐fluorescent (dark) byproducts are also formed. However, they have low absorbance and do not quench the fluorescence of the uncaged dyes. Photoactivation of the individual molecules of Rhodamines NN (e.g., due to reversible or irreversible transition to a “dark” non‐emitting state or photobleaching) provides multicolor images with subdiffractional optical resolution. The applicability of these novel caged fluorophores in super‐resolution optical microscopy is exemplified.     

5,12‐Diacetyl‐5,12‐dihydroquinoxalino[2,3‐b]quinoxalines: Solid‐State Fluorescence,AIE Properties,and Orbital Switching by Substituent Effect

The compound 5,12‐diacetyl‐5,12‐dihydroquinoxalino[2,3‐b]quinoxaline 1 a and its derivatives were prepared, and their solid‐ and solution‐state spectroscopic properties were studied; 1 a shows stronger fluorescence in solution than in the solid state due to aggregation caused by self‐quenching. Phenyl‐ or alkoxy‐substituted derivatives 1 b – d show solid‐state fluorescence with moderate quantum yields of about Φ=0.12–0.15, although the corresponding values are 0.01–0.07 in solution. The spectroscopic properties of alkoxy‐substituted derivatives were hardly changed compared to 1 a and 1 b , although 1 a and 1 b have similar absorption and fluorescence maxima in solution and in the solid state. DFT calculations indicate that orbital switching occurs between HOMO and HOMO‐1 and HOMO‐2 due to orbital interactions with introduced substituents. Crystal structure analysis revealed that the molecules have bent structures around tertiary nitrogen atoms and form a characteristic dimeric structure.