A new fluorescent chemosensor for F based on inhibition of excited-state intramolecular proton transfer

New fluorescent chemosensor 1 with two amidoanthraquinone groups (1-AAQs) at the lower rim of p-tert-butylcalix[4]arene has been synthesized. The significant changes of absorption and fluorescence bands show that chemosensor 1 is selective toward fluoride ion (F⁻) over other anions such as Cl⁻, Br⁻, I⁻, CH₃COO⁻, , , and OH⁻. The ESIPT process of 1 is inhibited by the fluoride-induced H-bonding followed by deprotonation of NH of the 1-AAQ.     

Anion recognition through hydrogen bonding by adamantane-dipyrromethane receptors

Adamantane-dipyrromethane (AdD) receptors [di(pyrrole-2-yl)methyladamantane (1), 2,2-di(pyrrole-2-yl)adamantane (2), 1,3-bis[di(pyrrole-2-yl)methyl]adamantane (3), 2,2,6,6-tetra(pyrrole-2-yl)adamantane (4)] form complexes with F⁻, Cl⁻, Br⁻, AcO⁻, NO₃⁻, HSO₄⁻, and H₂PO₄⁻. The association constants of the complexes were determined by ¹H NMR titrations, whereas the geometries of complexes 1·F⁻ (2:1), 2·F⁻ (2:1), 2·Cl⁻ (2:1), 2·AcO⁻ (2:1), and 4·F⁻ (1:1) were determined by X-ray structural analysis. The most stable complexes are of 2:1 stoichiometry with F⁻ and AcO⁻. The stability constants are in accordance with the anion basicity and the ability of AdD receptors to place the hydrogen bonding donor groups in a tetrahedral fashion around anions. The binding energies of the complexes between receptors 1-4 and F⁻ anion are calculated using quantum chemical methods. The calculated results show that the solvent polarity is important for the complexation of fluoride ion with AdD receptors 1-4.     

Synthesis and properties of novel 5-(cyclohepta-2′,4′,6′-trienylidene)pyrimidine-2(1H),4(3H),6(5H)-triones: methodology for synthesizing cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborates

Novel condensation reaction of tropone with N-substituted and N,N′-disubstitued barbituric acids in Ac₂O afforded 5-(cyclohepta-2′,4′,6′-trienylidene)pyrimidine-2(1H),4(3H),6(5H)-trione derivatives (8a-f) in moderate to good yields. The ¹³C NMR spectral study of 8a-f revealed that the contribution of zwitterionic resonance structures is less important as compared with that of 8,8-dicyanoheptafulvene. The rotational barriers (ΔG^‡) around the exocyclic double bond of mono-substituted derivatives 8a-c were obtained to be 14.51-15.03 kcal mol⁻¹ by the variable temperature ¹H NMR measurements. The electrochemical properties of 8a-f were also studied by CV measurement. Upon treatment with DDQ, 8a-c underwent oxidative cyclization to give two products, 7 and 9-substituted cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborates (11a-c·BF₄⁻ and 12a-c·BF₄⁻) in various ratios, while that of disubstituted derivatives 8d-f afforded 7,9-disubstituted cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborate (11d-f·BF₄⁻) in good yields. Similarly, preparation of known 5-(1′-oxocycloheptatrien-2′-yl)-pyrimidine-2(1H),4(3H),6(5H)-trione derivatives (14a-d) and novel derivatives 14e,f was carried out. Treatment of 14a-c with aq. HBF₄/Ac₂O afforded two kinds of novel products 11a-c·BF₄⁻ and 12a,c·BF₄⁻ in various ratios, respectively, while that of 14d-f afforded 11d-f. The product ratios of 11a-c·BF₄⁻ and 12a-c·BF₄⁻ observed in two kinds of cyclization reactions were rationalized on the basis of MO calculations of model compounds 20a and 21a. The spectroscopic and electrochemical properties of 11a-f·BF₄⁻ and 12a-c·BF₄⁻ were studied, and structural characterization of 11c·BF₄⁻ based on the X-ray crystal analysis and MO calculation was also performed.     

Half sandwich complexes of Ru(II) and complexes of Pd(II) and Pt(II) with seleno and thio derivatives of pyrrolidine: Synthesis, structure and applications as catalysts for organic reactions

The reactions of PhSe⁻, PhS⁻ and Se²⁻ with N-{2-(chloroethyl)}pyrrolidine result in N-{2-(phenylseleno)ethyl}pyrrolidine (L1), N-{2-(phenylthio)ethyl}pyrrolidine (L2), and bis{2-pyrrolidene-N-yl)ethyl selenide (L3), respectively, which have been explored as ligands. The complexes [PdCl₂(L1/L2)] (1/7), [PtCl₂(L1/L2)] (2/8), [RuCl(η⁶-C₆H₆)(L1/L2)][PF₆] (3/9), [RuCl(η⁶-p-cymene)(L1/L2)][PF₆] (4/10), [RuCl(η⁶-p-cymene)(NH₃)₂][PF₆] (5) and [Ru(η⁶-p-cymene)(L1)(CH₃CN)][PF₆]₂·CH₃CN (6) have been synthesized. The L1-L3 and complexes were found to give characteristic NMR (Proton, Carbon-13 and Se-77). The crystal structures of complexes 1, 3-6, 9 and 10 have been solved. The Pd-Se and Ru-Se bond lengths have been found to be 2.353(2) and 2.480(11)/2.4918(9)/2.4770(5) Å, respectively. The complexes 1 and 7 have been explored for catalytic Heck and Suzuki-Miyaura coupling reactions. The value of TON has been found up to 85 000 with the advantage of catalyst’s stability under ambient conditions. The efficiency of 1 is marginally better than 7. The Ru-complexes 3 and 9 are good for catalytic oxidation of primary and secondary alcohols in CH₂Cl₂ in the presence of N-methylmorpholine-N-oxide (NMO). The TON value varies between 8.0 × 10⁴ and 9.7 × 10⁴ for this oxidation. The 3 is somewhat more efficient catalyst than 9.     

Synthesis and dynamics of atropisomeric (S)-N-(α-phenylethyl)benzamides

The synthesis of atropisomeric 2-substituted benzamides 2a-e, 3a-e, and 4a-e, and characterization by X-ray structure analysis of 2d, 2e, 3c, 3e, 4c, and 4e are reported. Dynamic ¹H NMR spectroscopic studies of benzamides 2b-d, 3b-d, and 4b-d indicate that only two of the four possible rotamers are present in solution, with population ratios ranging between 1.5:1 and 4.1:1. The measured free energy of activation to interconversion of the rotamers ranged from 12.4 to 18.9 kcal mol⁻¹. Benzamides ArCON[(S)-phenethyl]₂ (2e, 3e, and 4e), exhibited atropisomer ratios between 1.7:1 and 1:1, and free energies of interconversion of the rotamers ranged from 11.5 to 17.6 kcal mol⁻¹. The highest rotation barriers were observed for the ortho-nitro derivatives 2a-e. Molecular calculations at the semiempirical level (PM3MM) gave free energies of activation for benzamides 2e and 3e of 23.6 and 12.4 kcal mol⁻¹, respectively, which are comparable to the experimental values.     

Enantioselective syntheses of poison-frog alkaloids: 219F and 221I and an epimer of 193E

Enantioselective syntheses of indolizidines (−)-219F and (−)-221I have been achieved and the relative stereochemistries of natural 219F and 221I were determined by the present synthesis. A levorotatory indolizidine, corresponding to one proposed structure for 193E, was also synthesized, but was found to differ from 193E. It seems likely that natural 193E is the 8-epimer of the synthesized indolizidine.     

Experimental and theoretical approaches into the C- and D-ring problems of sterol biosynthesis. Hydride shift versus C-C bond migration due to cation conformational changes controlled by the counteranion

The C- and D-ring problems of sterol biosynthesis, how an enzyme overcomes the Markovnikov wall, were investigated by using a model compound from an experimental as well as theoretical standpoint. When model diol 20 was treated with BF₃·Et₂O, SnCl₄, TiF₄, Sc(OTf)₃, FeCl₃, or TfOH, spirocyclic ether 21 was formed as the sole product via a tert-cationic intermediate 16 through 1,2-hydride shift. However, the treatment with TiCl₄ afforded six-membered ring products 22, 23, 24, 25, 26, and 27 via the ring expansion into the unstable six-membered ring secondary cation 17. Occurrence of both α and β chloride 23 and 24 is distinctive evidence of the existence of secondary cation 17, ruling out the idea of the concerted mechanism. Molecular mechanics calculations of the naked cation 15 elucidated two possible conformers, parallel 15-I (five membered ring and cationic plane) that is favorable for the hydride shift generating 16 and perpendicular 15-II leading to C-C bond migration to 17. The first ab initio calculation of the cation conformation in the presence of counteranions such as [TiCl₄OH]⁻, [TiF₄OH]⁻, [BF₃OH]⁻, and [OTf]⁻ entirely supported our experimental results. Although the counteranion [TiCl₄OH]⁻ stabilizes perpendicular cation 15-II, it destabilizes the parallel conformer 15-I significantly, and thus, the C-C bond migration to 17 becomes the only possible pass. On the other hand, [TiF₄OH]⁻, [BF₃OH]⁻, and [OTf]⁻ stabilize parallel conformer 15-I and the hydride shift to 16 becomes the only possible pass. The relative location or distance of the counteranion from the cation should be the biggest factor to control the stability and, thus, the conformation of the cation. Our results indicate that the carboxylate anions in the enzyme cavity enable to control the conformation of pre-C-ring cationic intermediate 3 to be perpendicular leading to six-membered C-ring secondary cation 4. The parallel conformation of the cation 5 could lead to hydride shift to give tirucallanoids or lanostanoids. Therefore, this result is the first example that overcame the big Markovnikov wall experimentally and theoretically at least to our knowledge.     

Rhodium(I) carbonyl complexes of quinoline carboxaldehyde ligands and their catalytic carbonylation reaction

The dimeric rhodium precursor [Rh(CO)₂Cl]₂ reacts with quinoline (a) and its three isomeric carboxaldehyde ligands [quinoline-2-carboxaldehyde (b), quinoline-3-carboxaldehyde (c), and quinoline-4-carboxaldehyde (d)] in 1:2 mole ratio to afford complexes of the type cis-[Rh(CO)₂Cl(L)] (1a-1d), where L = a-d. The complexes 1a-1d have been characterised by elemental analyses, mass spectrometry, IR and NMR (¹H, ¹³C) spectroscopy together with a single crystal X-ray structure determination of 1c. The X-ray crystal structure of 1c reveals square planar geometry with a weak intermolecular pseudo dimeric structure (Rh?Rh = 3.573 Å). 1a-1d undergo oxidative addition (OA) with different electrophiles such as CH₃I, C₂H₅I and I₂ to give Rh(III) complexes of the type [Rh(CO)(COR)Cl(L)I] {R = -CH₃ (2a-2d), R = -C₂H₅ (3a-3d)} and [Rh(CO)Cl(L)I₂] (4a-4d) respectively. 1b exhibits facile reactivity with different electrophiles at room temperature (25 °C), while 1a, 1c and 1d show very slow reactivity under similar condition, however, significant reactivity was observed at a temperature ∼40 °C. The complexes 1a-1d show higher catalytic activity for carbonylation of methanol to acetic acid and methyl acetate [Turn Over Frequency (TOF) = 1551-1735 h⁻¹] compared to that of the well known Monsanto’s species [Rh(CO)₂I₂]⁻ (TOF = 1000 h⁻¹) under the reaction conditions: temperature 130 ± 2 °C, pressure 33 ± 2 bar, 450 rpm and time 1 h. The organometallic residue of 1a-1d was also isolated after the catalytic reaction and found to be active for further run without significant loss of activity.     

Solid chemistry of the Zn/1,2,4-triazolate/anion system: Separation of 2D isoreticular layers tuned by the terminal counteranions X (X=Cl, Br, I, SCN)

An array of 2D isoreticular layers, viz. [Zn(atrz)X]_∞ (1·X; X=Cl⁻, Br⁻, I⁻; atrz=3-amino-1,2,4-triazole anion), [Zn₄(atrz)₄(SCN)₄·H₂O]_∞ (1·SCN·H₂O) and [Zn(trz)X]_∞ (2·X; X=Cl⁻, Br⁻, I⁻; trz=1,2,4-triazole anion), have been hydrothermally synthesized and structurally characterized. Compounds 1·X and 1·SCN·H₂O are constructed from binuclear planar Zn₂(atrz)₂ subunits and exhibit (4,4) topological network when the subunits are simplified as four-connected nodes. Based on changing the terminal counteranions X (X=Cl⁻, Br⁻, I⁻, SCN⁻), the average interlayer separations of 1·X and 1·SCN·H₂O are enlarged, which equal to 5.851, 6.153, 6.651 and 8.292 Å, respectively. As a result, H₂O molecules reside in the spaces between two adjacent layers of 1·SCN·H₂O. 2 and 1 are the isomorphous structures. In common with 1, the interlayer separations of 2·X are widened with increasing the ion radius. Solid-state luminescence properties and thermogravimetric analyses of 1 and 2 were investigated, respectively.     

The supramolecular chemistry of metal complexes with heavily substituted imidazoles as ligands: Cobalt(II) and zinc(II) complexes of 1-methyl-4,5-diphenylimidazole

An investigation of the M^II/X⁻/L [M^II = Co, Ni, Cu, Zn; X⁻ = Cl⁻, Br⁻, I⁻, NCS⁻, NO₃⁻, N₃⁻, CH₃COO⁻; L = 1-methyl-4,5-diphenylimidazole] general reaction system towards the detailed study of the intermolecular interactions utilized for controlling the supramolecular organization and the structural consequences on the structures produced has been initiated. Three representative complexes with the formulae [Co(NO₃)₂(L)₂] (1), [Zn(NO₃)₂(L)₂] (2) and [Co(NCS)₂(L)₂]·EtOH (3·EtOH) have been synthesized and characterized by spectroscopic methods and single-crystal X-ray analysis. Compounds 1 and 2 are isomorphous (tetragonal, I4₁cd) with their metal ions in a severely distorted octahedral Co/ZnN₂O₄ environment, while 3·EtOH crystallizes in P2₁/c with a tetrahedral CoN₄ coordination. The structural analysis of 1, 2 and 3·EtOH reveals a common mode of packing among neighbouring ligands (expressed through intramolecular π–π interactions between the 4,5-diphenylimidazole moieties), enhancing thus the rigidity and stability of the complexes. The bent coordination of the two isothiocyanates in 3 [Co–NCS angles of 173.8(2) and 160.8(2)°] seems to be caused by intermolecular hydrogen bonding and crystal packing effects.     

Photoactive building blocks for coordination complexes: Gilding 2,2′:6′,2″-terpyridine

The alkyne unit of 4′-ethynyl-2,2′:6′,2″-terpyridine has been functionalized with Ph₃PAu, (2-tolyl)₃PAu or Au(dppe)Au units to produce compounds 1-3, respectively. These derivatives have been characterized by electrospray mass spectrometry, solution ¹H and ¹³C NMR, UV-Vis and emission spectroscopies, and single crystal X-ray diffraction. In the solid state, molecules of 1 or 2 pack with separated domains of tpy and R₃PAu units; the tpy units in 2 (but not 1) exhibit face-to-face π-stacking. Compound 3 crystallizes as 2(3)^.CHCl₃, and the folded conformation of the dppe backbone results in a short (2.9470(8) Å) aurophilic interaction. Folded molecule 3 captures CHCl₃, preventing intramolecular face-to-face π-interactions between the tpy units. In CH₂Cl₂ solution, 1-3 are emissive when excited between 230 and 300 nm, but over minutes when λ_ex = 230 nm, the emission bands decay as the compounds photodegrade.     

Preparation of chelate bis(imine)nickel allyl systems by reaction of their corresponding butadiene complexes with electrophiles

The chelate 1,2-bis(imine)nickel(butadiene) complex 4a (chelate ligand derived from condensation of biacetyl with 2,6-diisopropylaniline) adds the strong Lewis acid B(C₆F₅)₃ at the terminal carbon atom of the butadiene ligand to yield the dipolar substituted π-allyl-type betaine complex (lig)Ni[η³-C₃H₄-CH₂B(C₆F₅)₃] (Z-6a). At 90 °C the kinetically formed product equilibrated with its E-6a isomer. Similarly, 4a adds the boron Lewis acid (pyrrolyl)B(C₆F₅)₂ to yield the corresponding neutral dipolar π-allyl betaine complex Z-7a, that slowly equilibrated with E-7a over several hours at ambient temperature. Protonation of the butadiene ligand of complex 4a was achieved by treatment with the neutral Brønsted acid (2H-pyrrol)B(C₆F₅)₃ to yield the [(lig)Ni(η³-crotyl)⁺][(pyrrolyl)B(C₆F₅)₃⁻] salt 9a (Z-/E-9a ratio=90:10 upon preparation). At 298 K this salt rearranged to a 5:95 mixture of Z-9a/E-9a with a Gibbs activation energy of ΔG^‡ (298 K)=22.3±0.2 kcal mol⁻¹. Complex 4a added [Ph₃C⁺] to the butadiene ligand to yield the salt [(lig)Ni(η³-C₃H₄-CH₂CPh₃)⁺][B(C₆F₅)₄⁻] (Z-12a), that proved isomerically stable under the applied reaction conditions. Similar reactions were carried out starting from the acenaphthylene 1,2-dione derived chelate bis(imine)Ni(butadiene) complex 4b. The systems 6, 7, 9 and 12 were found to be active ethene polymerization catalysts in the presence of Al(i-Bu)₃.     

Structural diversity in the self-assembly of Ag(I) complexes containing 2-amino-5-halopyrimidine

A series of Ag(I) complexes containing the 2-amino-5-halopyrimidine ligands have been synthesized and their structures characterized by X-ray crystallography. The isomorphous complexes Ag(L-Cl)₂(CF₃SO₃) (L-Cl = 2-amino-5-chloropyrimidine), 1, and Ag(L-Br)₂(CF₃SO₃) (L-Br = 2-amino-5-bromopyrimidine), 2, are mononuclear, while [Ag(L-Br)(CF₃SO₃)]₆·6C₄H₁₀O, 3, and [Ag(L-I)(CF₃SO₃)]₆ (L-I = 2-amino-5-iodopyrimidine), 4, show cyclic self-assembly of six Ag(Ι) atoms and six L-X ligands, resulting in 24-membered metallocycles. The complex [Ag(L-I)(CF₃SO₃)]_∞, 5, forms 1D zigzag chains which are linked through C-I?Ag and Ag?O interactions to form a 3D structure. The tetranuclear complexes [Ag(L-X)(NO₃)]₄ [X = Cl, 6; Br, 7] form 16-membered metallocycles, while [Ag(L-X)(ClO₄)]_∞ [X = Cl, 8; Br, 9] exhibit helical chains. The different structure of 5 from 1 and 2 appears to be due to the stronger nucleophilic character of the iodine atom. In these complexes, the relatively smaller NO₃⁻ anions lead to the formation of tetranuclear metallocycles and the larger CF₃SO₃⁻ anions support the hexanuclear metallocycles, whereas the ClO₄⁻ anions induce the helical chains.     

Synthesis and characterization of new Rh complexes bearing CO, PPh3 and chelating P,O- or Se,Se-ligands: Application to hydroformylation of styrene

The complexes [Rh(CO)(PPh₃){Ph₂PNP(O)Ph₂-P,O}] (3), [Rh(CO)₂{Ph₂P(Se)NP(Se)Ph₂-Se,Se′}] (5), and [Rh(CO)(PPh₃){Ph₂P(Se)NP(Se)Ph₂-Se,Se′}] (6), were synthesised by stepwise reactions of CO and PPh₃ with [Rh(cod){Ph₂PNP(O)Ph₂-P,O}] (2) and [Rh(cod){Ph₂P(Se)NP(Se)Ph₂-Se,Se′}] (4), respectively. The complexes 3, 5 and 6 have been studied by IR, as well as ¹H and ³¹P NMR spectroscopy. The ν(CO) bands of complexes 3 and 6 appear at approximately 1960 cm⁻¹, indicating high electron density at the Rh^I centre. The structure of complexes 3 and 6 has been determined by X-ray crystallography, and the ³¹P NMR chemical shifts have been resolved via low temperature NMR experiments. Both complexes exhibit square planar geometry around the metal centre, with the five-membered ring of complex 3 being almost planar, and the six-membered ring of complex 6 adopting a slightly distorted boat conformation. The C-O bond of the carbonyl ligand is relatively weak in both complexes, due to strong π-back donation from the electron rich Rh^I centre. The catalytic activity of the complexes 2, 3 and 6 in the hydroformylation of styrene has been investigated. Complexes 2 and 3 showed satisfactory catalytic properties, whereas complex 6 had effectively no catalytic activity.     

Novel 2,7-substituted pyrene derivatives: syntheses, solid-state structures, and properties

A novel series of pyrene derivatives 3-6 functionalized with different aromatic substituents at 2,7-positions of the pyrene core have been readily synthesized by Suzuki coupling reactions. Single crystals suitable for X-ray crystallographic analysis of compounds 3-6 were all successfully obtained. The optical, electrochemical, and thermal properties of these newly synthesized compounds were thoroughly investigated and discussed. Theoretical calculation was adopted to study the geometric and electronic structure of compounds 3-6. Additionally, preliminary studies demonstrated that field-effect transistors using compound 3, 5, and 6 performed as p-type semiconductors, in which a field-effect mobility as high as 0.018 cm² V⁻¹ s⁻¹ and current on/off ratio of 10⁶ were achieved from compound 6.     

Synthesis and electrochemical properties of new cobalt and manganese phthalocyanine complexes tetra-substituted with 3,4-(methylendioxy)-phenoxy

The synthesis and electrochemical properties of new cobalt and manganese phthalocyanine complexes, tetra-substituted with 3,4-(methylendioxy)-phenoxy at the peripheral (complexes 3 and 5) and non-peripheral (complexes 4 and 6) positions, are reported. Complexes 3 and 4 showed Q-band absorption, in DMF, at 668 and 686 nm, respectively while Q-band due to complexes 5 and 6 appeared at 732 and 760 nm, respectively in CHCl₃. All the complexes showed well resolved redox processes attributed to both metal and ring based processes. Complexes 3 and 4 showed four redox processes, labeled I, II, III and IV. For complex 3, process I (Co^IPc⁻²/Co^IPc⁻³) was observed at −1.45 V, II (Co^IIPc⁻²/Co^IPc⁻²) at −0.38 V, III (Co^IIIPc⁻²/Co^IIPc⁻²) at +0.49 V and IV (Co^IIIPc⁻¹/Co^IIIPc⁻²) at +0.97 V versus Ag|AgCl. Similar processes were observed for complex 4 at −1.36 V, −0.27 V, +0.56 V, +1.03 V versus Ag|AgCl, respectively. Complexes 5 and 6 showed two redox processes (I and II). For complex 5, these processes appeared at −0.79 V (Mn^IIPc⁻²/Mn^IIPc⁻³, I) and −0.07 V versus Ag|AgCl (Mn^IIIPc⁻²/Mn^IIPc⁻², II), while for complex 6, they were observed at −0.86 V and −0.04 V versus Ag|AgCl. Spectroelectrochemistry was used to probe and confirm the origin of these processes.     

New succinamic acids, -γ-lactones, and -succinimides from (3-perfluoroalkyl-2-iodoalkyl)succinic acid anhydrides and amines : Highly surface active amphiphiles

The (3-perfluoroalkyl-2-iodoalkyl)succinic anhydrides (4 and 5) react with primary (RNH₂) and secondary amines (RYNH) to yield (3-F-alkyl-2-iodoalkyl)succinamic acids. A second mole of RYNH gives the conjugate bases, 7a and 7b, as two position isomers. Only the C-1 isomer 7a can cyclize to a γ-lactone, while the carboxylate ion intramolecularly displaces iodide ion from CHI as RYNH₂⁺I⁻. Simultaneously, the nucleophilic carboxylate at C-4 in the unreacted isomer 7b attacks the CONHYR group at C-1 to displace the amine and revert to the anhydride 4. Then Step (1) is repeated until all of 7a and 7b are consumed. Though a weak base, COO⁻ is an effective nucleophile in the coiled conformation of 7a or 7b. In the next step, the CH₂(CO)NHR group of the γ-lactone, with an N-attack at the carbonyl rearranges to an N-alkyl (3-F-alkyl-2-hydroxypropyl)succinimide. As above, the lactone opens its ring under stereoelectronic control (with proper alignment of lone pairs on the two O atoms) and forms a new succinimide ring. These reactions occur, successively, in an aprotic, low polarity solvent under mild conditions. Elimination of HI from 4 or 5, or the iodopropylsuccinamic acid, does not occur. Diamines, e.g. (CH₃)₂N(CH₂)₃NH₂ (23) or (CH₃)₂N(CH₂)₃NH(CH₃) (27), reacting with 1 mol of 4 or 5, yield the zwitterionic salt., which inter alia, cyclizes smoothly to the γ-lactone HI salt. The lactone.HI salt from 23, as above, rearranges to the N-(dimethylammonium)propyl (3-F-alkyl-2-hydroxypropyl)succinimide iodide, while the lactone salt 33HI from diamine 27, like that from diethylamine, does not rearrange. Diamine 23, reacting with the t-butyl half ester, R_FCH₂CHICH₂CH(CO₂H)CH₂CO₂C(CH₃)₃, displaces t-butyl alcohol to yield the zwitterionic salt and γ-lactone HI salt, but not the succinimide. Radical addition of R_FI to N-butyl prop-2-enylsuccinimide (100 °C; no solvent) provides the desired adduct in high yield. By contrast, N-(3-dimethylamino)propyl (3-F-alkyl-2-iodopropyl)succinimide (25), loses HI intramolecularly to the basic (CH₃)₂N group; the concentration of 25 is 10 times greater than amines in reactions above. The R_F-surfactants (nonionic, zwitterionic, anionic, and cationic salts) of this work have an oriented F-alkyl segmented tail and a fairly complex polar head; and as a group, they lower the surface tension (γ_a) of water to 15-17 mN m⁻¹ at 1.5-1.7 mM concentration.     

Novel photo-induced oxidative cyclization of 1,3-dimethyl-5-(1-arylmethylidene)pyrimidine-2,4,6(1,3,5H)-triones: synthesis and properties of areno[5,6]pyrano[2,3-d]pyrimidine-2,4(1,3H)-dionylium ions and their photo-induced autorecycling oxidizing reaction toward some amines

Novel photo-induced oxidative cyclization was accomplished to synthesize areno[b]pyrimido[5,4-e]pyran-2,4(1,3H)-dionylium ions 13a-c⁺·ClO₄⁻. Furthermore, 13a-c⁺·BF₄⁻ and their phenyl-substituted derivatives 19a,b⁺·BF₄⁻ were alternatively synthesized by the reaction of salicylaldehyde and its naphthyl derivatives with barbituric acids and subsequent treatment with aq. HBF₄. Structural characteristics of 13a-c⁺ and 19a,b⁺ were clarified on inspection of the UV-vis and NMR spectral data as well as X-ray crystal analyses. The electrochemical properties were studied by the CV measurement. In a search for reactivity, reactions of 13a-c⁺·BF₄⁻ with some nucleophiles, hydride, benzylamine, and H₂O, were also carried out. The photo-induced autorecycling oxidation reactions of 13a-c⁺·BF₄⁻ toward some amines under aerobic conditions were carried out to give the corresponding imines (isolated by converting to the corresponding 2,4-dinitrophenylhydrazones) in 643-3600% yield (recycling number of 13a-c⁺·BF₄⁻: 6.4-36.0).     

New P-bridgehead urea-based tripodal anion receptors for H2PO4 recognition

A series of new P-bridgehead tripodal urea-based anion receptors 1-3 bearing phosphine oxide (PO) were synthesized and characterized. Their anion-binding ability was examined by UV-vis, ¹H NMR, ³¹P NMR, and ESI-MS. The results revealed that receptors 1-3 showed good sensitivity, selectivity, and binding affinity for H₂PO₄⁻ over NO₃⁻ and Br⁻, and among them receptor 2 showed the best binding affinity for H₂PO₄⁻ over F⁻, Br⁻, CH₃COO⁻, HSO₄⁻, and NO₃⁻. The Job plot experiments indicated that receptors 1-3 formed 1:1 stoichiometric complex with H₂PO₄⁻.     

Nickel (II) complexes bearing 2-ethylcarboxylate-6-iminopyridyl ligands: synthesis, structures and their catalytic behavior for ethylene oligomerization and polymerization

A series of nickel (II) complexes (L)NiCl₂ (7-9) and (L)NiBr₂ (10-12) were prepared by the reactions of the corresponding 2-carboxylate-6-iminopyridine ligands 1-6 with NiCl₂ · 6H₂O or (DME)NiBr₂ (DME = 1,2-dimethoxyethane), respectively. All the complexes were characterized by IR spectroscopy and elemental analysis. Solid-state structures of 7, 8, 10, 11 and 12 were determined by X-ray diffraction. In the cases of 7, 8 and 10, the ligands chelate with the nickel centers in tridentate fashion in which the carbonyl oxygen atoms coordinate with the metal centers, while the carbonyl oxygen atoms are free from coordinating with the nickel centers in 11 and 12. Upon activation with methylaluminoxane (MAO), these complexes are active for ethylene oligomerization (up to 7.97 × 10⁵ g mol⁻¹ (Ni) h⁻¹ for 11 with 2 equivalents of PPh₃ as auxiliary ligand) and/or polymerization (1.37 × 10⁴ g mol⁻¹ (Ni) h⁻¹ for 9). The ethylene oligomerization activities of 7-12 were significantly improved in the presence of PPh₃ as auxiliary ligands. The effects of the coordination environment and reaction conditions on the ethylene catalytic behaviors have been discussed.