An Ethylenediamine‐based Switch to Render the Polyzwitterion Cationic at Tumorous pH for Effective Tumor Accumulation of Coated Nanomaterials

Polyzwitterions are employed as coating polymers for biomaterials to induce an antifouling property on the surface. Fine‐tuning the betaine structure switches the antifouling property to be interactive with anionic tissue constituents in response to a tumorous pH gradient. The ethylenediamine moiety in the carboxybetaine enabled stepwise protonation and initiated the di‐protonation process around tumorous pH (6.5). The net charge of the developed polyzwitterion (PGlu(DET‐Car)) was thus neutral at pH 7.4 for antifouling, but was cationic at pH 6.5 for interaction with anionic constituents. Quantum dots coated with PGlu(DET‐Car) exhibited comparable stealth and enhanced tumor accumulation relative to the PEG system. The present study provides a novel design of smart switchable polyzwitterion based on a precise control of the net charge.     

Influence of ionic constituents and electrical conductivity on the propagation of charged nanoscale objects in passivated gel electrophoresis

When determining the electric field E acting on charged objects in gel electrophoresis, the electrical conductivity of the buffer solution is often overlooked; E is typically calculated by dividing the applied voltage by a separation distance between electrodes. However, as a consequence of electrolytic reactions, which occur at the electrodes, gradients in the ionic content of the buffer solution and its conductivity can potentially develop over time, thereby impacting E and affecting propagation velocities of charged objects, v, directly. Here, we explore how the types and concentrations of ionic constituents of the buffer solution, which largely control its conductivity, when used in passivated gel electrophoresis (P‐gelEP), can influence E, thereby altering v of charged nanospheres propagating through large‐pore gels. We measure the conductivity of the buffer solution in the center of the gel region near propagating bands of nanospheres, and we show that predictions of E based on conductivity closely correlate with v. We also explore P‐gelEP involving two different types of passivation agents: nonionic polyethylene glycol (PEG) and anionic sodium dodecyl sulfate (SDS). Our observations indicate that using a conductivity model to determine E from the local current density and the conductivity where spheres are propagating can lead to a better estimate than the standard approach of a voltage divided by a separation. Moreover, this conductivity model also provides a starting point for interpreting the complex behavior created by amphiphilic ionic passivation agents, such as SDS, on propagating nanospheres used in some P‐gelEP experiments.     

Effect of solution chemistry on the surface charge of polymeric reverse osmosis and nanofiltration membranes

A streaming potential analyzer has been used to investigate the effect of solution chemistry on the surface charge of four commercial reverse osmosis and nanofiltration membranes. Zeta potentials of these membranes were analyzed for aqueous solutions of various chemical compositions over a pH range of 2 to 9. In the presence of an indifferent electrolyte (NaCl), the isoelectric points of these membranes range from 3.0 to 5.2. The curves of zeta potential versus solution pH for all membranes display a shape characteristic of amphoteric surfaces with acidic and basic functional groups. Results with salts containing divalent ions (CaCl₂, Na₂SO₄, and MgSO₄) indicate that divalent cations more readily adsorb to the membrane surface than divalent anions, especially in the higher pH range. Three sources of humic acid, Suwannee River humic acid, peat humic acid, and Aldrich humic acid, were used to investigate the effect of dissolved natural organic matter on membrane surface charge. Other solution chemistries involved in this investigation include an anionic surfactant (sodium dodecyl sulfate) and a cationic surfactant (dodecyltrimethylammonium bromide). Results show that humic substances and surfactants readily adsorb to the membrane surface and markedly influence the membrane surface charge.     

Use of a hydrophobic associative four-armed star anionic polymer to create a saline aqueous solution of CO2-switchability

A four-armed anionic star-shaped block polymer, containing an anionic polymer poly(2-Acrylamido-2-methylpropanesulfonic acid) (PAMPS) as the core group and poly(2-(Dimethylamino)ethyl methacrylate) (PDM) as the terminal group, was synthesized by using the Atom Transfer Radical Polymerization (ATRP) method. The (PAMPS₅₀-PDM₅₀)₄ aqueous solution exhibited both polyelectrolyte and hydrophobic associative characteristics, that is, a low concentration of NaCl results in decreasing viscosity but a high concentration of NaCl results in increasing viscosity. The four-armed anionic block polymer shows a CO₂-reversible property at high concentrations of brine. Viscosity, pH, and ζ potential demonstrate the switchability jointly; the values could be switched from relatively low to high cyclically. These transitions could actually be attributed to the protonation of tertiary amine groups in PDM blocks, and the mechanism was proved by ¹H NMR.     

Acid-base chemistry of montmorillonitic and beidellitic-montmorillonitic smectite

Suspension of a Tunisian purified smectite and American montmorillonite are studied by acid-base potentiometric and mass titrations. These experimental methods are used to determine the point of zero net proton charge (PZNPC). A very good agreement is observed between the two kinds of experiments. The two Namontmorillonites, studied at different ionic strengths, present proton adsorption vs. pH curves with a common crossing point. The PZNPC of the edge sites are 8.02 for Tunisian purified smectite and 8.11 for pure American montmorillonite. By analyzing the proton adsorption or desorption (H⁺ vs. pH) curves, one may assume the presence of four active sites at the surface. The montmorillonite surface undergoes two successive protonations and two successive deprotonations. Below pH < PZNPC and in acidic range, the cation exchange at layer sites and protonation of edge sites (>A1OH groups) occur simultaneously. For pH > PZNPC and in alkaline pH range, deprotonation of surface hydroxyl groups exposed at the edge sites (>SiOH, and >A1OH at high pH) of montmorillonite platelets causes an overall negative charge. Published in Russian in Elektrokhimiya, 2007, Vol. 43, No. 2, pp. 175–187. The text was submitted by the authors in English.     

Amphoteric character of polyelectrolyte complex particles as revealed by isotachophoresis and viscometry

Isotachophoresis and viscometric measurements were performed on aqueous dispersions of non-stoichiometric polyelectrolyte complexes in order to elucidate the surface charge situation of the complex particles in dependence on component charge density, ratio of cationic to anionic groups in the complex, and pH and ionic strengths of the ambient medium. Components for complex formation were acryl-based anionic and cationic polyelectrolytes of the pendent type. From our results, an amphoteric character of the polyelectrolyte complex particles can be concluded, with an isoelectric point characterized by zero mobility and a minimum in reduced viscosity _spec/c of the particle dispersion, and with the sign of net surface charge depending on ambient pH and component charge density. The influence of ionic strength on the _spec/c vs pH plots can be interpreted by assuming a competition between salting-out and electrostatic shielding effects. No correlation could be established between the overall molar ratio of cationic to anionic groups and the isoelectric point of the complex particles, which obviously indicates a different composition of surface and bulk of the polyelectrolyte complex particles.     

Cd2+ Counterion-Assisted Synthesis of Uniform CdS Nanospheres Capped with the Anionic Surfactant Sodium dodecylsulfate

Uniform cadmium sulfide (CdS) nanospheres were successfully prepared in the presence of the anionic surfactant sodium dodecylsulfate (SDS) at an appropriate concentration and relatively low temperature. Zeta potential data were collected for the three kinds of CdS particles to verify the existence of the Cd²⁺counterion on the CdS surface and Charge reversal; this was crucial for the explanation of how the anionic SDS surfactant molecules adsorbed on the negatively charged surface. Moreover, we confirmed that SDS had coated the surface of CdS nanospheres using infrared spectroscopy, and thermogravimetric analysis. An counterion assisted mechanism accounting for synthesis of CdS nanospheres could be widely used in the synthesis of nanomaterials if there is specific adsorption of the counterion. The CdS nanospheres showed good performance for the rapid adsorption of methylene blue.     

pH值调节方式对LAB辅助合成纳米Cu2O微球的影响与组装机理

以Cu(Ac)₂为原料,两性表面活性剂月桂酰胺丙基甜菜碱(LAB)为模板,采用两种不同的调节pH值方式制备了Cu₂O纳米材料.表征结果表明两种调节pH值方式均可获得Cu₂O纳米微球,并都呈立方晶相,而且样品的红外吸收峰、固体紫外吸收峰都不同程度的发生了蓝移;第一种Cu₂O纳米微球由针状纳米粒子积聚而成,针状纳米粒子间空隙孔径主要分布在25~50 nm之间,比表面积为22 m²·g^-1,禁带宽度为2.15 eV;第二种Cu₂O纳米微球由小的纳米球状体堆积而成,球状体间孔道直径集中在25~50 nm和50~125 nm两个区域,比表面积为9 m²·g^-1,禁带宽度为2.46 eV.两种不同的调节pH值方式获得的Cu₂O纳米微球,其反应历程和自组装机理存在不同.     

pH值调节方式对LAB辅助合成纳米Cu2O微球的影响与组装机理

以Cu(Ac)2为原料,两性表面活性剂月桂酰胺丙基甜菜碱(LAB)为模板,采用两种不同的调节pH值方式制备了Cu_2O纳米材料。表征结果表明两种调节pH值方式均可获得Cu_2O纳米微球,并都呈立方晶相,而且样品的红外吸收峰、固体紫外吸收峰都不同程度的发生了蓝移;第一种Cu_2O纳米微球由针状纳米粒子积聚而成,针状纳米粒子间空隙孔径主要分布在25~50 nm之间,比表面积为22 m~2·g~(-1),禁带宽度为2.15 eV;第二种Cu_2O纳米微球由小的纳米球状体堆积而成,球状体间孔道直径集中在25~50 nm和50~125 nm两个区域,比表面积为9 m~2·g~(-1),禁带宽度为2.46 eV。两种不同的调节pH值方式获得的Cu_2O纳米微球,其反应历程和自组装机理存在不同。     

pH-responsive aqueous foams stabilized by ionizable latex particles

We have designed a type of colloidal particle whose surface characteristics are sensitive to the pH of the aqueous phase in which they are dispersed. Particles of polystyrene latex stabilized by poly(acrylic acid) can act as stabilizers of aqueous foams by adsorbing at the air-water surface. Foams can be prepared and stabilized only at pH values below the isoelectric point where particles are either uncharged and flocculated or acquire a positive charge. At high pH where particles are anionic, no foam forms. This influence of pH on foamability and stability applies to both pH-dependent and pH-responsive systems.     

Chiral separation of anionic and neutral compounds using a hepta-substituted cationic beta-cyclodextrin as a chiral selector in capillary electrophoresis

Enantiomeric separations of six anionic and two neutral racemates were achieved using a fully substituted heptakis(6-hydroxyethylamino-6-deoxy)-beta-cyclodextrin (beta-CD-EA) as a chiral selector. As beta-CD-EA provides a dynamic coating on the capillary wall, reverse-polarity capillary electrophoresis (CE) configuration is applied for separations of anionic and neutral chiral compounds. Chiral separations of various classes of anionic and neutral enantiomers were found to be highly dependent on pH because the degree of protonation of beta-CD-EA can alter the shape of the CD cavity by charge repulsion, altering complexation, aiding selectivity, and leading to better enantiomeric separation. In general, the chiral resolution of anionic enantiomers was enhanced at higher pH. This suggests that carboxylate or phosphate groups on the analyte may interact with the protonated amine groups of cationic CD. The successful enantioseparation was achieved in a pH range of 6.6-7.8 for all six anionic analytes, in the presence of 10 mM beta-CD-EA.     

Electroosmotic flow in template-prepared carbon nanotube membranes.

Carbon nanotube membranes (CNMs) were prepared by doing chemical vapor deposition of carbon within the pores of a microporous alumina template. Electroosmotic flow (EOF) was driven across the CNMs by allowing the membrane to separate two electrolyte solutions and using an electrode in each solution to pass a constant ionic current through the nanotubes. EOF was investigated by measuring the flux of a probe molecule (phenol) across the CNM. The as-synthesized CNMs have anionic surface charge, and EOF is in the direction of cation migration across the membrane. Measurements of the rate of EOF as a function of applied transmembrane current provided the zeta potential. The effect of pH on zeta provided the pK(a) for the surface acidic sites responsible for this anionic charge; the acidic-site density was also determined. An electrochemical derivatization method was used to attach carboxylate groups to the nanotube walls; this enhances the anionic surface charge density, resulting in a corresponding increase in the EOF rate. Electrochemical derivatization was also used to attach cationic ammonium sites to the nanotube walls to yield CNMs that show EOF in the opposite direction of the as-synthesized or carboxylated membranes.     

Separation and characterisation of beta2-microglobulin folding conformers by ion-exchange liquid chromatography and ion-exchange liquid chromatography–mass spectrometry

In this work we present for the first time the use of ion-exchange liquid chromatography to separate the native form and a partially structured intermediate of the folding of the amyloidogenic protein beta₂-microglobulin. Using a strong anion-exchange column that accounts for the differences in charge exposure of the two conformers, a LC–UV method is initially optimised in terms of mobile phase pH, composition and temperature. The preferred mobile phase conditions that afford useful information were found to be 35 mM ammonium formate, pH 7.4 at 25 °C. The dynamic equilibrium of the two species is demonstrated upon increasing the concentration of acetonitrile in the protein sample. Then, the chromatographic method is transferred to MS detection and the respective charge state distributions of the separated conformers are identified. The LC–MS results demonstrate that one of the conformers is partially unfolded, compared with the native and more compact species. The correspondence with previous results obtained in free solution by capillary electrophoresis suggest that strong ion exchange LC–MS does not alter beta₂-microglobulin conformation and maintains the dynamic equilibrium already observed between the native protein and its folding intermediate.     

Charge regulation in redox active monolayers embedded in proton exchanger surfaces

Experimental evidence of the variation in redox potential of osmium pyridine complexes tethered to a Au surface by thiol or diazonium chemistry at different ionic concentration and electrolyte pH is described. The interplay between the charged redox and acid groups is described by a charge regulation model based on PM-IRRAS spectroscopic evidence on the different degrees of surface protonation.     

Adsorption of cationic polyelectrolyte onto a model carboxylic latex and the influence of adsorbed polycation on the charge regulation at the latex surface

 Adsorption of a well-characterized cationic polyacrylamide (CPAM) onto the surface of a model colloid (monodisperse polystyrene latex with carboxylic functional groups) was studied over a wide range of pH (4–9) and KCl concentration (c _s =10^-3–0.3 M). The surface charge density of the latex particles with and without adsorbed CPAM was also measured over the same range of electrolyte compositions. The adsorbed amount of CPAM increases with increase in c _s and pH. The polyelectrolyte adsorption alters substantially the surface charge density of the latex particles as compared to the polymer-free case. A large overcompensation of the surface charge by the adsorbed polyelectrolyte is established at high c _s and low pH. A qualitative explanation of the observed features is put forward. Received: 3 December 1996 Accepted: 20 January 1997     

ELECTROCHEMICAL PROPERTIES OF ASPHALTENE PARTICLES IN AQUEOUS SOLUTIONS

The electrical properties of colloidal asphaltene/water solution interface were determined by carrying out the potentiometric titration and electrokinetic measurements. Asphaltenes in aqueous solutions exhibit typical organic colloid properties i.e. surface charge and electrophoretic mobility. It was considered that the surface charge at the asphaltene particles is a result of protonation and dissociation reactions of surface functional groups. On the base of the surface charge density data vs. pH the surface reaction constants were calculated by numerical method. The agreement of these values with calculated ones, on the base of ζ potential data, is noticeable.

The characteristic feature of the investigated systems is the maximum, appearing on the curve ζ potential vs. electrolyte concentration. This behaviour is explained by _”hair layer ” structure of the asphaltene surface     

X-ray photoelectron spectroscopic studies of charge transfer interactions in electroactive polyaniline

Four modes of charge transfer interactions in polyaniline (PAN), viz. acid protonation, self-doping, charge transfer interactions with organic acceptors, and charge transfer interactions with surface grafted functional polymers have been studied by X-ray photoelectron spectroscopy (XPS). In the case of acid protonation, the protonation behavior of volatile and non-volatile acid differs. The structures of sulfonated leucomeraldine (LM) and nigraniline (NA) are similar to those of sulfonated and self-protonated emeraldine (EM). A substantially higher degree of charge transfer interaction with the organic acceptors is observed for EM film that has been subjected to one cycle of acid/base treatment. The charge transfer interactions with the organic acceptors have proceeded further than the pure formation of molecular complexes. Both pristine and Ar plasma or O₃ pretreated EM films are susceptible to surface modifications by graft copolymerization. The protonic acid functional groups of the graft readily give rise to a self-protonated EM surface.     

Surface-enhanced Raman scattering of EDOT and PEDOT on silver and gold nanoparticles

Surface-enhanced Raman scattering (SERS) spectra of the conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) and its monomer 3,4-ethylenedioxythiophene (EDOT) on Ag and Au nanoparticles presenting different morphologies and stabilizing agents have been obtained using the excitation radiation at 633 nm. The SERS spectra of the monomer and polymer are strongly dependent both on the metal and capping agent of the substrate. SERS spectra of EDOT on Au nanospheres indicates that adsorption occurs with the thiophene ring perpendicular to the metal surface. In contrast, polymerization takes place on the silver surface of Ag nanospheres. EDOT adsorption on Ag nanoprisms with polyvinylpyrrolidone (PVP) as capping agent occurs similarly to that observed on gold. Surface-enhanced resonance Raman scattering (SERRS) spectra of PEDOT on gold nanostars that present a thick layer of PVP show no chemical interaction of PEDOT with the metal surface; however, when PEDOT is adsorbed on citrate stabilized gold nanospheres, the SERRS spectra suggest that thiophene rings are perpendicular to the surface. Oxidation of PEDOT also is observed on Ag nanospheres. The investigation of the interface between PEDOT and metal surface is crucial for the development in polymer-based optoelectronic devices since this interface plays a crucial role in their stability and performance.     

TiO2在水及丙二醇介质中表面电性质的研究

0引言 固体颗粒在液相介质中的分散是基础研究领域和工业技术部门普遍遇到的问题 ?在化学工业领域,如涂料 ? 染料 ? 油墨 ? 化妆品等,固体颗粒的分散及分散稳定性直接影响着产品的质量和性能 ?TiO 2 颗粒的水基分散体系广泛应用于涂料 ? 油墨以及化妆品中,也是陶瓷制备过程中重     

可见光高催化活性GO/Ag3PO4/Ni复合薄膜的制备和性能

以磷酸铵和氧化石墨烯悬浊液的混合液为电解液,采用电化学共沉积法制备了Ag3PO4基GO/Ag3PO4/Ni复合薄膜。运用扫描电子显微镜(SEM)、能量色散谱(EDS)、X射线衍射(XRD)、拉曼光谱(Raman)和紫外可见漫反射光谱(UV-Vis DRS)等对其形貌、物相和光谱特性进行分析。最佳工艺制备的GO/Ag3PO4/Ni复合薄膜呈现出GO包覆在直径为100 nm左右的Ag3PO4纳米球外的表面形貌。GO片与Ag3PO4纳米球之间存在强电荷相互作用。与单独的Ag3PO4纳米球相比,GO片的附着导致带隙缩小,可见光区的吸收率增强。可见光下考察了复合薄膜降解罗丹明B的光催化活性和稳定性,并利用荧光光谱和捕获剂法对薄膜的光催化机理进行了探索。结果表明,GO片的加入不仅显著提高了Ag3PO4的光催化活性,而且提高了Ag3PO4的结构稳定性。光催化降解罗丹明B 60 min时,GO/Ag3PO4/Ni复合薄膜的降解率是Ag3PO4/Ni薄膜的1.32倍。在保持薄膜光催化活性基本不变的前提下可循环使用7次。GO优异的电荷传导性能,以及Ag3PO4纳米球与GO片之间的正协同效应是提高复合薄膜光催化性能的主要原因。