4-Vinylbenzenesulfonic acid adduct of epoxidized soybean oil: Synthesis, free radical and ADMET polymerizations

In this work new radically polymerizable triglyceride based monomers were synthesized by the reaction of epoxidized methyl oleate (EMO) and epoxidized soybean oil (ESO) with 4-vinyl benzene sulfonic acid (4VBSA). The products are 1-(4-vinylbenzene sulfonyl)oxy-2-alkonols of epoxidized soybean oil (SESO) and 1-(4-vinylbenzene sulfonyl)oxy-2-alkonols of epoxidized methyl oleate (SEMO). These adducts were characterized by ¹H NMR, ¹³C NMR, IR and CHNS elemental analysis. SESO was found to contain, on the average, 2.47 4VBSA units per triglyceride. SESO was free radically polymerized and co-polymerized with styrene and the mechanical and thermal properties of the resulting thermosets were determined by DMA, DSC and TGA. SEMO was used as a model compound to determine the efficiency of metathesis catalysts for these fatty acid derivatives. The second generation Hoveyda–Grubbs catalyst was found to give best yields. ADMET polymerization of SESO with this catalyst with and without solvent gave ∼80% yield of a thermoset polymer. Polymers obtained by free radical route swelled in water at room temperature, and hydrolyzed in water at 60 °C.     

Autooxidized Polyunsaturated Oils/Oily Acids: Post-it Applications and Reactions with Fe(III) and Adhesion Properties

Soybean oil, sesame oil, linoleic acid and linolenic acid were epoxidized, peroxidized and hydroperoxidized via autooxidation under air oxygen and sunlight at room temperature to obtain novel post-it materials. Polymeric soybean oil peroxide and sesame oil peroxide were containing soluble part of 60%(w/w) together with crosslinked part of 40%(w/w) while polymeric linoleic and polymeric linolenic acids were completely soluble. The autooxidized soluble products with Mn varying between 800 and 3100 Daltons were used as post-it adhesive. The highest adhesion was observed in the case of polymeric soybean oil (3.0 Newton), while adhesion of commercial epoxidized soybean oil, polymeric linoleic and polymeric linolenic acid were 0.8, 0.5 and 0.5 Newton, respectively. Reactions of the autooxidized soluble products with Fe(NO₃)₃. 4H₂O in the presence of ethanol, glycerol and diethyleneglycol gave the hydroxy functionalized products with the same M_n values and indicating no adhesive properties. When the commercial epoxidized soybean oil was reacted with Fe(NO₃)₃. 4H₂O in the presence of the alcohols, Mn of the hydroxy functionalized polymeric oil was found to be unchanged. ¹H NMR, FT-IR, SEM and GPC techniques were used in the characterization of the products obtained.     

Synthesis and characterization of itaconic‐based epoxy resins

A trifunctional epoxy resin from itaconic acid (TEIA) was synthesized from a renewable resource‐based itaconic acid by allylation of itaconic acid to form diallyl itaconate by using m‐chloroperoxybenzoic acid as oxidizing agents followed by epoxidation of allylic C═C bond of diallyl itaconate methylhexahydropthalic anhydride as curing agent in the presence of 2‐methyl imidazole as a catalyst. The chemical structure of the synthesized resins was confirmed by Fourier transform infrared and nuclear magnetic resonance (¹H‐NMR and ¹³C‐NMR) spectroscopy analysis. The mechanical, thermal, and rheological performances of the TEIA were also investigated and compared with diglycidyl ether of bisphenol A and a plant‐based epoxidized soybean oil bioresin cured with the same curing agent. The higher epoxy value of 1.02, lower viscosity (0.96 Pa s at 25°C), higher mechanical, and higher curing reactivity toward methylhexahydropthalic anhydride of TEIA as compared with epoxidized soybean oil and comparable with diglycidyl ether of bisphenol A demonstrated significant evidence to design and develop a novel bio‐based epoxy resin with high performance to substitute the petroleum‐based epoxy resin.     

Soybean biodiesel methyl esters,free glycerin and acid number quantification by 1H nuclear magnetic resonance spectroscopy

Production of alternative fuels, such as biodiesel, from transesterification of vegetable oil driven by heterogeneous catalysts is a promising alternative to fossil diesel. However, achieving a successful substitution for a new renewable fuel depends on several quality parameters. ¹H NMR spectroscopy was used to determine the amount of methyl esters, free glycerin and acid number in the transesterification of soybean oil with methanol in the presence of hydrotalcite‐type catalyst to produce biodiesel. Reaction parameters, such as temperature and time, were used to evaluate soybean oil methyl esters rate conversion. Temperatures of 100 to 180 °C and times of 20 to 240 min were tested on a 1 : 12 molar ratio soybean oil/methanol reaction. At 180 °C/240 min conditions, a rate of 94.5 wt% of methyl esters was obtained, where free glycerin and free fatty acids were not detected. Copyright © 2012 John Wiley & Sons, Ltd.     

A Green One-pot Synthesis of PDMS Bis-Macromonomers Using an Ecologic Catalyst (Maghnite-H+)

PDMS bis-macromonomers bearing methyl methacrylate end groups is a material mainly used for making extended-wear contact lenses. Silicon-based materials give a good oxygen passage and methyl methacrylate has biocompatibility and mechanical properties of the elastomer. The present study shows the synthesis of this material. The polymerization of hexamethylcyclotrisiloxane (D₃) catalyzed by Maghnite-H⁺ (Mag-H⁺), a montmorillonite sheet silicate clay exchanged with protons, an efficient catalyst for cationic polymerization of manyheterocyclic and vinylicmonomers. The structural compositions of “Maghnite” have already been determined. The effects of the amount of Mag-H⁺, temperature and the reaction time were studied. Moreover, we used a simple method, one step in solution to prepare Poly dimethyl siloxane (PDMS) and PDMS bis-macromonomers. The structure of the resulting products is characterized and established by ¹H and ¹³C-NMR, where the methacrylate end groups are clearly visible. The presence of unsaturated end group was also determined by UV and FTIR analysis. The influence of the amount of methacrylic anhydride on monomer conversion was studied. The polymerization yield and the molecular weight of PDMS macromonomers depend on the amount of methacrylic anhydride used.     

Thermal and mechanical properties of epoxy resin toughened with epoxidized soybean oil

A series of new modified epoxy resin (EP) cured products were prepared from epoxidized soybean oil and commercial epoxy resin, with methyl nadic anhydride as curing agent and 1-methylimidazole as promoting agent. The thermal properties of the resins were characterized by DMA and TG; DSC was used to determine the curing process. Fourier transform infrared spectroscopy was utilized to investigate their molecular structures and scanning electron microscopy was used to observe the micro morphology of their impact fracture surfaces. Tensile and impact testing was employed to characterize the mechanical properties of the cured products. The combination of commercial EP with 20 wt% ESO resulted in a bioresin with the optimum set of properties: 130.5 °C T _g, 396.9 °C T _50 %, 74.89 MPa tensile strength, and 48.86 kJ m^?2 impact resistance.     

Cleavage of alkylsilanes by strong acids : IV. The reactions of alkyldimethylfluorosilanes with fluorosulfonic acid

The kinetics of cleavage of alkyl groups and fluorine from five alkyldimethylfluorosilanes by fluorosulfonic acid dissolved in methylene chloride has been studied with proton magnetic resonance. Competitive cleavage of alkyl, methyl and fluoro occurs to form three products. A mechanism is proposed based on the third order kinetics which involves the formation of a pentacoordinate intermediate through nucleophilic attack of fluorosulfonic acid at silicon followed by electrophilic attack α to silicon.     

CH2＝CHCl与O(3P)反应的理论研究

用量子化学密度泛函理论和QCISD (Quadratic configuration interaction calculation)方法, 对O(³P)与CH₂CHCl的反应进行了理论研究. 在UB3LYP/6-311＋＋G(d,p), UB3LYP/6-31＋＋G(3df, 3pd)计算水平上, 优化了反应物、产物、中间体和过渡态的几何构型, 并在UQCISD(T)/6-311＋＋G(2df,2pd)水平上计算了单点能量. 为了确证过渡态的真实性, 在UB3LYP/6-311＋＋G(3df,3pd)水平上进行了内禀坐标(IRC)计算和频率分析, 并确定了反应机理. 研究结果表明, 反应主要产物为CH₂CHO和Cl.     

A new enone‐containing triglyceride derivative as precursor of thermosets from renewable resources

A novel triglyceride containing α,β‐unsaturated ketone was prepared through photoperoxidation from high oleic sunflower oil by two steps one pot environmentally friendly procedure. This new enone‐containing triglyceride was crosslinked with diaminodiphenylmethane (DDM) via aza‐Michael addition. A kinetic study of the reaction of p‐toluidine with either enone‐containing methyl oleate or epoxidized methyl oleate, as model compounds, allowed us to establish the higher reactivity of the former, thus confirming this curing system as an alternative to amine‐cured epoxidized vegetable oils. The thermal properties of thermosets from enone‐ and epoxy‐containing triglycerides with DDM have been evaluated. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6843–6850, 2008     

Synthesis of NIPU by the carbonation of canola oil using highly efficient 5,10,15‐tris(pentafluorophenyl)corrolato‐manganese(III) complex as novel catalyst

For the green synthesis of polyurethane (PU), non‐isocyanate routes are worthy alternatives. In the present work, we have explored 5,10,15‐tris(pentafluorophenyl)corrolato‐manganese(III) complex as novel catalyst for coupling reaction between epoxidized canola oil and CO₂ (gaseous) to introduce cyclic carbonate moieties in the oil and further used it to obtain non‐isocyanate PU, generally abbreviated as NIPU, by curing with different diamines. The results obtained indicated a 1/4th of the reduction in reaction time with the use of 5,10,15‐tris(pentafluorophenyl)corrolato‐manganese(III) complex as catalyst as compared to the previously reported literature data. As per the reported studies, the corrole metal complex has not been used for this reaction earlier. The structure of products and intermediates were confirmed by using different characterization techniques like ¹H NMR and FTIR spectroscopies. The thermal and mechanical behavior of final product was analyzed by TGA and universal testing machine, respectively. The non‐isocyanate PU obtained showed a good thermal stability up to 200°C and a tensile strength of up to 8 MPa. The effect of structure of diamines on the properties of non‐isocyanate PU was also extensively studied.     

Linseed oil‐based reactive diluents preparation to improve tetra‐functional epoxy resin properties

Two kinds of bio‐resourced reactive diluents have been synthesized from linseed oil. The prepared epoxidized linseed oil (ELO) and the cyclocarbonated linseed oil (CLO) were separately blended with a petroleum‐based tetra‐functional epoxy resin (TGDDM) to improve its processability and to overcome the brittleness of the thermoset network therefrom. The linseed oil modifications were spectrally established, and processability improvement of the resin blends was rheologically confirmed. The curing of samples was studied by differential scanning calorimetry, and their mechanical properties (ie, tensile, flexural, fracture toughness, and adhesion) were investigated as well. Scanning electron microscopy images were obtained to reconfirm the toughness improvement of the modified thermosets. In contrast of the epoxidized soybean oil (ie, the most conventionally studied bio‐based reactive diluent), ELO and CLO had no negative effects on the thermoset material characteristics. They improved properties such as tensile strength (up to 43.2 MPa), fracture toughness (1.1 MPa m^1/2), and peel‐adhesion strength (4.5 N/25 mm). It was concluded that ELO and CLO were efficient reactive diluents to be used in formulations of polymer composites, surface coatings, and structural adhesives based on epoxy resins.     

Morphology and photoelectrochemical properties of TiO2 electrodes prepared using functionalized plant oil binders

Chemically functionalized plant oils, viz. acrylated epoxidized soybean oil (AESO) and maleinized acrylated epoxidized soybean oil (MAESO), were used as bio-based binders for the TiO₂ electrodes of dye-sensitized solar cells (DSSC). The surface roughness and number of appropriate pores were increased in the TiO₂ films prepared using the plant oil binders in comparison with the film prepared using polyethylene glycol (PEG), due to the larger number of functionalities. The short circuit photocurrent (I_SC) and open circuit photovoltage (V_OC) were increased, and the conversion efficiency was significantly improved, in the cell using the plant oil binders.     

Identification Des Produits De La Reduction Electrochimique d'Un Nouvel Antiinflammatoire: Le Piroxicam

Abstract

The electrochemical reduction of piroxicam has been investigated on a mercury pool in acidic and alcaline media.

After exhaustive electrolysis, the extraction followed by chromatographic separation of the reaction products gives the reduced compounds which have been identified by spectroscopic techniques. From the analysis of the NMR ¹H, ¹³C and IR spectra and the results of our preceding electrochemical investigation, the polarographic behaviour of piroxicam has been elucidated. The process occurs by the irreversible reduction of the double bond of the enol function over the total pH range investigated. However, in alkaline and highly acidic solutions, a preceding two-electron step occurs, giving rise to the opening of the thiazine ring.     

Reactions of Nonequilibrium Oxygen Plasmas with Liquid Olefins

The oxidation of 13 liquid olefins with either high-voltage or radio frequency (RF) glow discharges has been studied. The reactions were carried out by making the oxygen plasma reach the low vapor pressure substrate. Product formation has proved to be selective—epoxides, aldehydes, ketones, and low quantities of carboxylic acids being the most important species. Fragmentation products were only observed in the traps of the RF system for the most volatile olefin of this study. This indicates that, except for this case, the most relevant interaction of this study has been the heterogeneous reaction of the plasma with the liquid. Total conversion, i.e., mass transformed against initial mass of substrate, has been studied as a function of temperature of the liquid and oxygen flow rate in the reactor, this ranging from 15 to 53.6 mmol/hr in the high-voltage system and 13 to 270 mmol/hr in the RF device. The optimum conversions were 27 to 99%. A correlation between these results and the behavior of the O( ³ P) population in the discharge allows us to conclude that this is the most relevant species to the oxidation process. A discussion relating the structures of the olefins with the composition of the mixtures produced by the oxidation is also presented.     

A new type of charge compensating mechanism in Ca5(PO4)3F:Eu phosphor

The X-ray powder diffraction, reflectance, photoluminescence, photoluminescence excitation and ESR spectra of Ca₅(PO₄)₃F:Eu³⁺ phosphor have been studied. Three distinct variants of calcium substitutional Eu³⁺-sites have been observed in this host and the charge compensating species related to each of these sites has been identified. It is noted that the host related trace impurities those have prospects of acting as charge compensator, and the reaction environment that exists during the preparation of the material, greatly influence the preferential substitution of different Ca²⁺-sites by the Eu³⁺ ions. It is also noted that the charge compensating species in a suitable case, takes part in the photophysical process of luminescence of the Eu³⁺.     

Rearrangements in Spiro-λ4-sulfane Chemistry

The reactions of possible spiro-λ⁴-sulfane precursor diaryl sulfoxides with dehydrating agents have been studied resulting in the formation of cyclic anhydride, spiro-λ⁴-sulfane, cyclic sulfonium-ylide, lactam-sulfoxide, cyclic sulfonimide and cyclic sulfilimine type of intermediates or products. The structures of the intermediates or products depend on the functional groups attached to the aryl rings at ortho positions and on the reaction conditions applied.     

Phosphorylation of pyridoxal azomethines. Synthesis of phosphorus containing azomethines and furopyridines

New O-phosphorylated pyridoxal derivatives have been synthesized through the reaction of azomethines with Р^V acid chlorides. 2-Chloro-2-thioxo-5,5-dimethyl-1,3,2-dioxaphosphinanes and diethylchlorothiophosphate have been employed as phosphorylating agents. Regardless of the nature of the phosphorylating agent, the reaction is regioselective at phenolic hydroxyl group. The structure of final products is determined by the nature of the substituent at the nitrogen atom. If R is alkyl or cycloalkyl group, the products of the reaction represent phosphorylated pyridoxal imines, whereas phosphorylated furopyridines are formed in the case R is aryl substituent.     

A novel method for the synthesis of biodiesel from soybean oil and urea

The increasing demand for energy has encouraged the development of renewable resources and environmentally benign fuel such as biodiesel. In this study, ethyl fatty esters (EFEs), a major component of biodiesel fuel, were synthesized from soybean oil using sodium ethoxide as a catalyst. By-products were glycerol and difatty acyl urea (DFAU), which has biological characteristics, as antibiotics and antifungal medications. Both EFEs and DFAU have been characterized using Fourier transform infrared (FTIR) spectroscopy, and ¹H nuclear magnetic resonance (NMR) technique. The optimum conditions were studied as a function of reaction time, reactant molar ratios, catalyst percentage and the effect of organic solvents. The conversion ratio of soybean oil into pure EFEs was 76% after 10 h of reaction. The highest conversion yield of EFEs is obtained when the urea/soybean oil ratio was from 6.2 mmol to 1 mmol, while the highest production of DFAU is obtained when the ethoxide (as a catalyst)/soybean oil ratio is from 6.4 mmol to 1 mmol in hexane as the reaction medium.     

Development of completely bio‐based epoxy networks derived from epoxidized linseed and castor oil cured with citric acid

Bio‐based epoxy resins were synthesized from nonedible resources like linseed oil and castor oil. Both the oils were epoxidized through in situ method and characterized via Fourier transform infrared and ¹H‐NMR. These epoxidized oils were crosslinked with citric acid without using any catalyst and their properties compared with diglycidyl ether of bisphenol A‐epoxy. The tensile strength and modulus of epoxidized linseed oil (ELO) were found to be more than those of epoxidized castor oil (ECO)‐based network. However, elongation at break of ECO was significantly higher than that of both ELO and epoxy, which reveals its improved flexibility and toughened nature. Thermogravimetric analysis revealed that the thermal degradation of ELO‐based network is similar to that of petro‐based epoxy. Dynamic mechanical analysis revealed moderate storage modulus and broader loss tangent curve of bio‐based epoxies confirming superior damping properties. Bioepoxies exhibit nearly similar contact angle as epoxy and display good chemical resistant. The preparation method does not involve the use of any toxic catalyst and more hazardous solvents, thus being eco‐friendly.     

Products characterization of tung oil–phenol reactions based on analysis of a model reaction

A method of determining the molecular species composition distributions of products obtained by reaction of tung oil with various phenols in the presence of acid catalyst has been studied. Methyl α-eleostearate was used as a model substance in place of tung oil. The product composition analysis of methyl α-eleostearate reactions with phenols was done by HLC. From these results, the molecular weight distributions and molecular species composition distributions of the reaction products were calculated according to a statistical procedure. Good agreement was found between the calculated and experimental molecular weight distribution, which enabled prediction of the molecular species composition distribution.