Synthesis and LCST‐type phase separation behavior in organic solvents of poly(vinyl ethers) with pendant imidazolium or pyridinium salts

Vinyl ether polymers with imidazolium or pyridinium salt pendants underwent sensitive lower critical solution temperature (LCST)‐type phase separation in organic media. Well‐defined poly(salts) were quantitatively prepared by reaction with corresponding imidazoles or pyridines and poly(2‐chloroethyl vinyl ether), which was synthesized by living cationic polymerization. For example, a solution of the homopolymer with butyl imidazolium salts exhibited a sharp and reversible transition in chloroform upon heating. Sensitive phase separation was also observed in nonpolar solvents, such as toluene, ethyl acetate, THF, containing a small amount of a good solvent, such as 1‐butanol (10–15 wt %). The dependency of the salt structures, molecular weight, and the concentration on this behavior was demonstrated. The cleavage of the hydrogen bond is a key factor in this phase separation, as indicated by DSC and ¹H‐NMR measurements. On increasing the temperature, the interaction between the polymer pendant and the solvent became weaker, hence the pendant–pendant interaction was, in turn, induced through the counter anion. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5724–5733, 2008     

Synthesis of various stimuli‐responsive gradient copolymers by living cationic polymerization and their thermally or solvent induced association behavior

Stimuli‐responsive gradient copolymers, composed of various monomers, were synthesized by living cationic polymerization in the presence of base. The monomers included thermosensitive 2‐ethoxyethyl vinyl ether (EOVE) and 2‐methoxyethyl vinyl ether (MOVE), hydrophobic isobutyl vinyl ether (IBVE) and 2‐phenoxyethyl vinyl ether (PhOVE), crystalline octadecyl vinyl ether (ODVE), and hydrophilic 2‐hydroxyethyl vinyl ether (HOVE). The synthesis of gradient copolymers was conducted using a semibatch reaction method. Living cationic polymerization of the first monomer was initiated using a conventional syringe technique, followed by an immediate and continuous addition of a second monomer using a syringe pump at regulated feed rates. This simple method permitted precise control of the sequence distribution of gradient copolymers, even for a pair of monomers with very different relative monomer reactivities. The stimuli‐responsive gradient, block and random copolymers exhibited different self‐association behavior. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6444–6454, 2008     

Facile one‐shot synthesis of functional star‐shaped polymers by domino‐type living cationic copolymerization

This article describes the syntheses of various functional star‐shaped polymers via monomer‐selective living cationic polymerization of a vinyl ether (VE) and a divinyl compound with alkoxystyrene moieties by a one‐shot method. An aqueous solution of the resulting star‐shaped polymers with oxyethylene pendants exhibits thermally induced phase separation behavior. To achieve domino synthesis from various monomers, we investigated the optimum reactivity difference using a functional VE and a monofunctional alkoxystyrene. Moreover, the one‐shot copolymerization of a bifunctional VE and an alkoxystyrene is also conducted to yield a star‐shaped polymer via the core‐first method. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2166–2174     

Precise synthesis of end‐functionalized thermosensitive poly(vinyl ether)s by living cationic polymerization

A series of poly(2‐methoxyethyl vinyl ether)s with narrow molecular weight distributions and with perfectly defined end groups of varying hydrophobicities was successfully synthesized by base‐assisting living cationic polymerization. The end group was shown to greatly affect the temperature‐induced phase separation behavior of aqueous solutions (lower critical solution temperature‐type phase separation) or organic solutions (upper critical solution temperature‐type phase separation) of the polymers. The cloud points were also influenced largely by the molecular weight and concentration of the polymer. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and self assembly of eosin functionalized amphiphilic block‐random copolymers prepared by ring opening metathesis polymerization

Self assembly of block copolymers has gained considerable attention because of its potential use in various areas such as medical and biomedical applications, nanotechnology, and electronics. Herein, we present the synthesis and characterization of amphiphilic block‐random copolymers with a covalently incorporated pH‐sensitive dye, namely eosin. Ring opening metathesis polymerization was chosen for the preparation of well defined block copolymers and block‐random copolymers using a modified “2nd Generation Grubbs” initiator. The self assembly behavior of the block‐random copolymers in solution was studied by dynamic light scattering and small angle X‐ray scattering (SAXS). The influence of dye incorporation on the result of the self assembly process in methanol and ethanol was investigated and a subtle interplay of the nature of the selective solvent, the chain‐length of the block copolymer and the position of the dye within the polymer chain was established. Structural investigations using SAXS revealed a spherical shape and a core‐shell structure of exemplary block and block‐random copolymer micelles. UV–vis absorption and photoluminescence measurements revealed similar optical properties for polymer micelles in methanol compared to polymer solutions in THF. The pH‐sensitive behavior of the eosin dye was preserved within the micelles. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 401–413, 2008     

Precise synthesis of pH‐responsive copolymers with naphthoic acid side groups via living cationic polymerization

pH‐Responsive homopolymers and copolymers with naphthoic acid side groups were synthesized via base‐assisting living cationic polymerization. To this end, the feasibility of the living cationic polymerization of ethyl 6‐[2‐(vinyloxy)ethoxy]‐2‐naphthoate (EVEN) was first examined using a base‐assisting initiating system. Et_1.5AlCl_1.5 as a Lewis acid catalyst induced the living cationic polymerization of EVEN in the presence of ethyl acetate or 1,4‐dioxane in CH₂Cl₂ at 0 °C. In contrast, the use of naphthoxyethyl vinyl ether (NpOVE), which is a nonsubstituted counterpart, resulted in a poorly controlled polymerization under these conditions. The presence of the carboxy ester was most likely critical in preventing side reactions. A subsequent alkaline hydrolysis of the side‐chain esters quantitatively yielded a carboxy‐containing polymer. Aqueous solutions of this polymer underwent pH‐driven phase separation at pH 7.0. Well‐defined random and block copolymers were also prepared with various functional segments, and their stimuli‐responsive behaviors were investigated in terms of solution transmittance and aggregate size. Block copolymers containing two different pH‐responsive segments formed micelle‐like structures between the two phase‐separated pH values, and dual stimuli‐responsive copolymers containing a pH‐responsive polyacid segment and a thermosensitive segment self‐assembled in the water in response to both the pH and temperature. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5239–5247     

Thermosensitive gradient copolymers by living cationic polymerization: Semibatch precision synthesis and stepwise dehydration‐induced micellization and physical gelation

Thermosensitive forced gradient copolymers with various sequence distributions were synthesized by living cationic polymerization in the presence of an added base. The synthesis was conducted using a semibatch reaction method, which is unfavorable for ionic polymerization, especially when a simple apparatus is employed. Polymerization of 2‐ethoxyethyl vinyl ether (EOVE) was initiated using a conventional syringe technique. Immediately after initiation, 2‐methoxyethyl vinyl ether (MOVE) was continuously added using a syringe pump at regulated feed rates, which allowed control of the sequence distribution. The resulting gradient copolymers of EOVE and MOVE underwent thermally induced association in water, forming micelles with a hydrophobic core derived from EOVE‐rich segments. Interestingly, the size of the micelles obtained from gradient copolymers decreased monotonously with increasing solution temperature, while the micelles of the corresponding block copolymers were unchanged in size. This self‐association behavior can be controlled by designing the gradient pattern of the instantaneous composition. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6151–6164, 2008     

Synthesis of a novel hybrid liquid‐crystalline rod–coil diblock copolymer

A series of novel rod–coil diblock copolymers on the basis of mesogen‐jacketed liquid‐crystalline polymer were successfully prepared by atom transfer radical polymerization from the flexible polydimethylsiloxane (PDMS) macroinitiator. The hybrid diblock copolymers, poly{2,5‐bis[(4‐methoxyphenyl)oxycarbonyl]styrene}‐block‐polydimethylsiloxane, had number‐average molecular weights (M_n's) ranging from 9500 to 30,900 and relatively narrow polydispersities (≤1.34). The polymerization proceeded with first‐order kinetics. Data from differential scanning calorimetry validated the microphase separation of the diblock copolymers. All block copolymers exhibited thermotropic liquid‐crystalline behavior except for the one with M_n being 9500. Four liquid‐crystalline diblock copolymers with PDMS weight fractions of more than 18% had two distinctive glass‐transition temperatures. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1799–1806, 2003     

Photocrosslinkable liquid‐crystalline block copolymers with coumarin units synthesized with atom transfer radical polymerization

A new class of liquid‐crystalline (LC) homopolymers of poly{11‐[4‐(3‐ethoxycarbonyl‐coumarin‐7‐oxy)‐carbonylphenyloxy]‐undecyl methacrylate} containing a coumarin moiety as a photocrosslinkable unit with various polymerization degrees and their LC‐coil diblock and LC‐coil‐LC triblock copolymers with polystyrene as the coil segment was synthesized with the atom transfer radical polymerization method. All the homopolymers and block copolymers synthesized here exhibited narrow polydispersities, indicating well‐controlled living polymerization. Differential scanning calorimetry, polarized optical microscopy, and wide‐angle X‐ray diffraction confirmed that all the homopolymers and block copolymers exhibit a monolayer smectic A phase. Coumarin moieties in the polymers can be photodimerized under λ > 300 nm light irradiation to yield crosslinked network structures, which improve the thermal stability of a polymer nanostructure because of microphase separation. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2197–2206, 2003     

Control of reaction mechanisms in cationically polymerized epoxy resins facilitates the adjustment of morphology and mechanical properties

Structure–property relations of cationically polymerized epoxy thermosets with different morphologies are examined. The morphology adjustment of amorphous epoxy based copolymers and partially crystalline polymer alloys is carried out with star‐shaped poly(ε‐caprolactone) (SPCL) bearing various numbers of hydroxyl end groups. These hydroxyl groups are known for their reactivity toward epoxides following the activated monomer (AM) mechanism. For this reason, four‐armed SPCL was synthesized with four hydroxyl end groups (SPCL‐tetraol) and, in addition, with successively esterified ones down to a SPCL with four ester end groups (SPCL‐tetraester). SPCL species bearing fewer or no hydroxyl end groups segregate into needle‐like nanodomains within the epoxy networks and, if the concentration is high enough, also into crystalline domains. The stronger phase separation of SPCL‐tetraester within the epoxy network compared with SPCL‐tetraol is due to a reduction of the AM mechanism. The mechanical properties resulting from different morphologies lead to a trade‐off between higher storage moduli and T_g values in the case of the more phase separated (and partially crystalline) polymer alloys and higher strain at break in the case of the amorphous copolymers. Nevertheless, in both cases toughness is improved or at least kept on the same level as for the pure epoxy resin. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2188–2199     

Synthesis,dynamic light scattering,and luminescence properties of copolymers containing iridium(III) bisterpyridine in the side chain

Supramolecular block‐random copolymers containing [Ir(terpy)₂]³⁺ in the side chain were synthesized via postfunctionalization of a P(S‐b‐AC_terpy) block copolymer. Absorbance and emission spectra compared to a model compound show that the polymer backbone has a minor effect on the polymer absorbance but produces a larger shift for the phosphorescence signals to higher wavelength. Dynamic light scattering of the metal complex containing copolymer studied in various solvents showed monomodal aggregation with decreasing aggregate size as the solvent dielectric constant increased. The copolymer precursor P(S‐b‐AC_terpy) shows multimodal aggregation in different solvents with the major population consisting of single chains. This difference in behavior between the two polymers is attributed to the electrolytic nature of the complex and the amphiphilicity induced by the charged metal complex. Supramolecular copolymers like these will continue to have interesting self‐organizational properties and may find applications in multicomponent systems for photoinduced charge separation processes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1109–1121, 2007     

Synthesis of sequence‐controlled copolymers from extremely polar and apolar monomers by living radical polymerization and their phase‐separated structures

A series of copolymers composed of two monomer units having a polar phosphorylcholine group and an apolar fluorocarbon group with a controlled monomer unit sequence were synthesized by a reversible addition‐fragmentation chain transfer (RAFT) living radical polymerization method. 2‐Methacryloyloxyethyl phosphorylcholine (MPC) and 2,2,2‐trifluoroethyl methacrylate (TFEMA) were selected as the monomers, because they have disparate polarity. Furthermore, to investigate the influence of the monomer unit sequence in a polymer chain on the phase‐separated structure in the bulk and surface structure, copolymers having a continuous change in the monomer unit composition along the polymer chain (gradient copolymer) were synthesized, as well as random and block copolymers. The analysis of instantaneous composition revealed a continuous change in the monomer unit composition in the gradient copolymer and the statistical monomer unit sequence in the random copolymer. Thermal analysis assumed that the gradient sequence of the monomer unit would make the phase‐separated structure in the bulk ambiguous, while the well‐defined and monodispersive block sequence would undergo the distinct phase‐separation due to the extreme difference in the polarity of the component monomer units. The preliminary surface characterization of the synthesized polymers indicated the monomer unit sequence in the polymer chain would much influence on the surface structure. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6073–6083, 2005     

Synthesis and characterization of side‐chain liquid crystalline ABC triblock copolymers with p‐methoxyazobenzene moieties by atom transfer radical polymerization

A series of novel side‐chain liquid crystalline ABC triblock copolymers composed of poly(ethylene oxide) (PEO), polystyrene (PS), and poly[6‐(4‐methoxy‐4′‐oxy‐azobenzene) hexyl methacrylate] (PMMAZO) were synthesized by atom transfer radical polymerization (ATRP) using CuBr/1,1,4,7,7‐pentamethyldiethylenetriamine (PMDETA) as a catalyst system. First, the bromine‐terminated diblock copolymer poly(ethylene oxide)‐block‐polystyrene (PEO‐PS‐Br) was prepared by the ATRP of styrene initiated with the macro‐initiator PEO‐Br, which was obtained from the esterification of PEO and 2‐bromo‐2‐methylpropionyl bromide. An azobenzene‐containing block of PMMAZO with different molecular weights was then introduced into the diblock copolymer by a second ATRP to synthesize the novel side‐chain liquid crystalline ABC triblock copolymer poly(ethylene oxide)‐block‐polystyrene‐block‐poly[6‐(4‐methoxy‐4′‐oxy‐azobenzene) hexyl methacrylate] (PEO‐PS‐PMMAZO). These block copolymers were characterized using proton nuclear magnetic resonance (¹H NMR) and gel permeation chromatograph (GPC). Their thermotropic phase behaviors were investigated using differential scanning calorimetry (DSC) and polarized optical microscope (POM). These triblock copolymers exhibited a smectic phase and a nematic phase over a relatively wide temperature range. At the same time, the photoresponsive properties of these triblock copolymers in chloroform solution were preliminarily studied. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4442–4450, 2008     

Synthesis and micellization of amphiphilic poly(sebacic anhydride)–poly(ethylene glycol)–poly(sebacic anhydride) block copolymers

Amphiphilic biodegradable block copolymers [poly(sebacic anhydride)–poly(ethylene glycol)–poly(sebacic anhydride)] were synthesized by the melt polycondensation of poly(ethylene glycol) and sebacic anhydride prepolymers. The chemical structure, crystalline nature, and phase behavior of the resulting copolymers were characterized with ¹H NMR, Fourier transform infrared, gel permeation chromatography, and differential scanning calorimetry. Microphase separation of the copolymers occurred, and the crystallinity of the poly(sebacic anhydride) (PSA) blocks diminished when the sebacic anhydride unit content in the copolymer was only 21.6%. ¹H NMR spectra carried out in CDCl₃ and D₂O were used to demonstrate the existence of hydrophobic PSA domains as the core of the micelle. In aqueous media, the copolymers formed micelles after precipitation from water‐miscible solvents. The effects on the micelle sizes due to the micelle preparation conditions, such as the organic phase, dropping rate of the polymer organic solution into the aqueous phase, and copolymer concentrations in the organic phase, were studied. There was an increase in the micelle size as the molecular weight of the PSA block was increased. The diameters of the copolymer micelles were also found to increase as the concentration of the copolymer dissolved in the organic phase was increased, and the dependence of the micelle diameters on the concentration of the copolymer varied with the copolymer composition. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1271–1278, 2006     

Synthesis and properties of gradient copolymers based on 2‐phenyl‐2‐oxazoline and 2‐nonyl‐2‐oxazoline

In this study, the structure–property relationships for a series of statistical 2‐nonyl‐2‐oxazoline (NonOx) and 2‐phenyl‐2‐oxazoline (PhOx) copolymers were investigated for the first time. The copolymerization kinetics were studied and the reactivity ratios were calculated to be r_NonOx = 7.1 ± 1.4 and r_PhOx = 0.02 ± 0.1 revealing the formation of gradient copolymers. The synthesis of a systematical series of NonOx–PhOx copolymers is described, whereby the amount of NonOx was increased in steps of 10 mol %. The thermal and surface properties were investigated for this series of well‐defined copolymers. The thermal properties revealed a linear decrease in glass transition temperature for copolymers containing up to 39 wt % NonOx. Furthermore, the melting temperature of the copolymers containing 0 to 55 wt % PhOx linearly decreased most likely due to disturbance of the NonOx crystalline domains by incorporation of PhOx in the NonOx part of the copolymer. The surface energies of spincoated polymer films revealed a strong decrease in surface energy upon incorporation of NonOx in the copolymers due to strong phase separation between NonOx and PhOx allowing the NonOx chains to orient to the surface. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6433–6440, 2009     

Laccase‐catalyzed polymerization of lignocatechol and affinity on proteins of resulting polymers

For the synthesis of a new biologically functional polymer from a natural resource by an environment‐friendly method, the laccase‐catalyzed polymerization of a lignin‐based macromonomer, lignocatechol, was carried out for the first time in ethanol–phosphate buffer solvent system to give crosslinked polymers in good yields. Lignocatechol was prepared by the phase separation system of lignin and catechol in aqueous sulfuric acid. The copolymerization was also performed with urushiol to afford the corresponding copolymers in high yields. The polymerization mechanism was estimated by the IR and pyrolysis GC‐MS measurements, suggesting that the polymerization proceeded mainly at the catechol ring through a quinone radical intermediate. The thermal properties were measured by the DSC, TG, and TMA analyses, indicating that the polymers had high thermal stabilities because of the crosslinked structures. In addition, it was found that the resulting polymers had the affinity of bovine serum albumin (BSA) and glucoamylase. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 824–832, 2009     

Fine structure and phase transition behavior of fluorinated comb copolymers

The fine structure in the solid state and phase transition behavior of newly synthesized comb copolymers having fluorocarbon and hydrocarbon side‐chains were investigated by temperature controlled wide angle X‐ray diffraction (WAXD) and differential scanning calorimetry (DSC). From the WAXD profiles, two kinds of short spacing peaks based on the formation of the subcell for fluorinated and hydrogenated side‐chains were confirmed at 5.0 and 4.1 Å, respectively. Furthermore, two kinds of endothermic peaks, which corresponded to melting peaks of both side‐chain crystals, appeared in heating process of the DSC thermograms. From these experimental findings, the phase separation structure having the independently packed immiscible side‐chain crystalline was formed in the whole polymer crystal. In addition, it was found that these comb polymers formed highly ordered (double) layer structure estimated using WAXD and small angle X‐ray scattering (SAXS). These fluorinated comb copolymers form a monolayer on the water surface and their transferred film with phase‐separated structure at nanometer size on solid. There were hydrogenated domains at 10–20 nm diameter scales in these phase separated surface structure of monolayers. From these experimental results, these copolymer monolayers are expected to be used as a new molecular device such as nanolithography based on the surface patterning of polymer nanomaterials. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 416–425, 2006     

Synthesis and tailoring phase behavior of mesogen jacketed liquid crystalline copolymers based on 2, 5‐bis[(4‐alkoxyphenyl)oxycarbonyl]styrenes

Based on 2, 5‐bis[(4‐alkoxyphenyl)oxycarbonyl]styrenes (M‐OCm, m is the number of the carbons of alkyl tails, m = 1, 4, and 18), three series of binary copolymers with high‐molecular weights, {poly(M‐OC1‐co‐M‐OC4), poly(M‐OC1‐co‐M‐OC18), and poly(M‐OC4‐co‐M‐OC18)} have been prepared via free‐radical polymerization. The random nature of the copolymers was expected on the basis of the assumed similar reactivities because of the analogous monomers. The phase behaviors of copolymers were studied by DSC, POM, and one‐dimensional wide‐angle X‐ray diffraction. The results showed that liquid crystalline (LC) phase structures of copolymers, containing smectic phase, reentrant isotropic phase, columnar phase. and isotropic phase, were strongly depended on the composition and the alkyl length due to the competing among the steric effect, the microphase separation and the driving force of the entropy. When one of them occupied a dominant position, the LC phase structure can be presented for the copolymers. Otherwise, the LC phase structure is lost despite the pair of corresponding homopolymers forming mesogenic structure. Therefore, through copolymerization, LC behavior of the mesogen‐jacketed liquid crystalline polymers can be greatly varied. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2804–2816     

Syntheses of random PET‐co‐PTTs and some related copolyesters by entropically‐driven ring‐opening polymerizations and by melt blending: Thermal properties and crystallinity

A library of random poly(ethylene terephthalate) (PET), poly(trimethylene terephthalate) (PTT), and seven PET–PTT copolymers has been prepared in a high throughput manner by entropically‐driven ring‐opening polymerizations of the corresponding macrocyclic oligomers. The products have been investigated by differential scanning calorimetry and wide angle X‐ray diffraction. They show that the 50:50 copolymer displays a crystalline phase. The same phase can be formed by in situ transesterification when a 50:50 mixture of PET and PTT is melt blended. Poly(butylene terephthalate) (PBT)–PET and PTT–PBT 50:50 copolymers also show crystal phases. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

ABA‐type liquid crystalline triblock copolymers via nitroxide‐mediated radical polymerization: Design,synthesis, and morphologies

We have designed and synthesized rod–coil–rod triblock copolymers of controlled molecular weight by two‐step nitroxide‐mediated radical polymerization, where the rod part consists of “mesogen‐jacketed liquid crystalline polymer” (MJLCP). The MJLCP segment examined in our studies is poly{2,5‐bis[(4‐methoxyphenyl)oxycarbonyl]styrene} (MPCS) while the coil part is polyisoprene (PI). Characterization of the triblock copolymers by GPC, ¹H and ¹³C NMR spectroscopies, TGA, DSC confirmed that the triblock copolymers were comprised of microphase‐separated low T_g amorphous PI and high T_g PMPCS blocks. Analysis of POM and 1D, 2D‐WAXD demonstrated that the triblock copolymers formed nematic liquid crystal phase. Morphological studies using TEM indicated the sample formed lamellar structure. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5949–5956, 2007