Nanometer‐scale surface modification by polymerization of tetrafluoroethylene on polymer substrates in supercritical fluoroform

Surface penetrated polymerization of tetrafluoroethylene (TFE) was carried out on a polycarbonate (PC) plate in supercritical fluoroform (scCHF₃). Since the high diffusiveness is one of peculiar features of supercritical fluids, TFE monomers and initiators (perfluorinated benzoyl peroxide) could penetrate into the surface of polymer substrates and be photo‐polymerized. After washing physisorbed homopolymers on the surface, polytetrafluoroethylene (PTFE) was found to penetrate into 50–800 nm depth from the surface and covered the PC surface in the proportion of 85%. The surface coverage density and the penetration depth could be controlled by adjusting of the pressure of scCHF₃. The TFE‐penetrated polymerization could be applied for various polymer plates such as polyethylene, polystyrene, polypropylene, poly(ethylene terephthalate), and polyimide. In addition to polymer plates, this technique could be applied to a cellulose paper, a nylon textile, and a porous PC membrane. The PTFE‐penetrated nylon textile showed a high resistance for washing test with detergents, compared with the commercial fluoropolymer‐sprayed nylon textile. The PTFE‐penetrated porous PC membrane showed high oxygen permeability (P/P = 5.2), compared with that of the untreated PC membrane (P/P = 3.5) in gas permeation experiments of O₂ and N₂. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1577–1585, 2008     

Controlled synthesis of trifluoropropylmethylsiloxane–dimethylsiloxane gradient copolymers by anionic ROP of cyclotrisiloxanes

Kinetics of the anionic ring opening copolymerization of 2,4,6‐tris(3,3,3‐trifluoropropyl)‐2,4,6‐trimethylcyclotrisiloxane (F₃) with hexamethylcyclotrisiloxane (D₃) was studied in THF using BuLi as the initiator. The apparent reactivity ratios were estimated by computer simulation to r = 0.10 ± 0.02, r = 51.8 ± 5.5, which were used to predict the copolymer composition. As a result of so much different reactivities, simultaneous copolymerization leads to copolymers of blocky structure containing a narrow intermediate fragment with gradient distribution of siloxane units. Polymers having more uniform distribution of the trifluoropropyl groups along the chain were obtained by the semibatch process, adding F₃ to the polymerization of less reactive D₃. The resulted copolymers were characterized by SEC chromatography, ²⁹Si NMR, DSC, DMA, and SAXS. Thermal and mechanical properties of the copolymers obtained by simultaneous copolymerization were similar to those of block copolymers. Only the copolymers obtained by semibatch method showed properties typical for gradient copolymers. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1204–1216, 2009     

The effect of water content on the ultimate properties of rubbery nanocomposite gels

An investigation was conducted into the effects of water content (R) on the ultimate tensile properties of nanocomposite hydrogels (NC gels) based on poly(N‐isopropylacrylamide)/clay networks. Rubbery NC gels with low clay contents (<NC10) exhibited unique changes in their stress–strain curves, depending on the R. At high R, where PNIPA chains are fully hydrated, NC gels retained their rubbery tensile properties, whereas they changed to exhibit plastic‐like deformations with decreasing R. Consequently, for a series of NC gels with different R, a failure envelope was obtained by connecting the rupture points in the stress–strain curves. Here, the counterclockwise movement was observed as either the R decreased or the strain rate increased. This seemed to be analogous to that of a conventional elastomer (e.g., SBR), although the mechanisms are different in the two cases. From the R and C_clay dependences of the ultimate properties, three critical values of R were defined, where R showed a maximum strain at break, a steep increase in initial modulus, and onset of brittle fracture. Compared with NC gels, OR gels (chemically crosslinked hydrogels) showed similar but very small changes in their stress–strain curves on altering R, whereas LR (viscous PNIPA solution) showed a monotonic decrease (increase) in ε_b (E_i) with decreasing R. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 2328–2340, 2009     

Synthesis and Characterization of a Family of POCOP Pincer Complexes with Nickel: Reactivity Towards CO2 and Phenylacetylene

A cyclohexyl‐based POCOP pincer ligand (POCOP=cis‐1,3‐bis(di‐tert‐butylphosphinito)cyclohexyl) cyclometalates with nickel to generate a series of new POCOP‐supported Ni^II complexes, including the halide, hydride, methyl, and phenyl species. trans‐[NiCl{cis‐1,3‐bis(di‐tert‐butylphosphinito)cyclohexane}], [(POCOP)NiCl] ( 1 a ) and the analogous bromide complex ( 1 b ) were synthesized and fully characterized by NMR spectroscopy and X‐ray crystallography. Cyclic voltammetry measurements of 1 a and 1 b alongside their bis(phosphine) analogues [(PCP)NiCl] ( 2 a ) and [(PCP)NiCl] ( 2 a ) (PCP=cis‐1,3‐bis(di‐tert‐butylphosphino)cyclohexyl) indicate a reduced electron density at the metal center upon introducing electron‐withdrawing oxygen atoms in the pincer arms. The methyl [(POCOP)NiMe] ( 3 ) and phenyl [(POCOP)NiPh] ( 4 ) complexes were formed from 1 a by reaction with the corresponding organolithium reagents. 1 a also reacts with LiAlH₄ to give the hydride complex [(POCOP)NiH] ( 5 ). The methyl complex 3 reacts with phenyl acetylene to give the acetylide complex [(POCOP)NiCCPh] ( 6 ). The reactivity of compounds 3 – 5 towards CO₂ was studied. The hydride complex 5 and the methyl complex 3 both underwent CO₂ insertion to form the formate species [(POCOP)NiOCOH] ( 7 ) and acetate species [(POCOP)NiOCOCH₃] ( 8 ), respectively, although with a higher barrier of insertion in the latter case. Compound 4 was unreactive towards CO₂ even at elevated temperatures. Complexes 3 – 8 were all characterized by NMR spectroscopy and X‐ray crystallography.     

Synthesis and characterization of new organosoluble and gas‐permeable polyimides from bulky substituted pyromellitic dianhydrides

Two new pyromellitic dianhydrides, 1,4‐bis(4′‐t‐butylphenyl) pyromellitic dianhydride and 1,4‐bis(4′‐trimethylsilylphenyl) pyromellitic dianhydride, were synthesized via Suzuki coupling, oxidation, and dehydration. A series of new organosoluble polyimides were prepared from the obtained pyromellitic dianhydride and various aromatic diamines by the conventional polycondensation reaction followed by chemical imidization, as well as high‐temperature, one‐step polymerization. The structures of the dianhydrides and polymers were identified with various spectroscopies. The inherent viscosities of the resulting polymers were 0.62–1.89 dL/g. The synthesized polyimides showed good solubility in various organic solvents such as N‐methyl‐2‐pyrrolidinone, N,N‐dimethylacetamide, and p‐chlorophenol. These polymers had glass‐transition temperatures of 230–260 °C. Thermogravimetric analysis showed that all the polymers were stable, with 10% weight losses recorded above 490 °C in nitrogen. The polyimide films had good mechanical properties and high oxygen permselectivity to nitrogen. The oxygen permeability coefficient (P) and the permselectivity of oxygen to nitrogen (P/P) of the films were 13–56 barrer and 3.7–5.5, respectively. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4288–4296, 2002     

Peculiar kinetics of the complex formation in the iron(III)–sulfate system

The results of comprehensive equilibrium and kinetic studies of the iron(III)–sulfate system in aqueous solutions at I = 1.0 M (NaClO₄), in the concentration ranges of T = 0.15–0.3 mM, and at pH 0.7–2.5 are presented. The iron(III)–containing species detected are FeOH²⁺ (=FeH_?1), (FeOH) (=Fe₂H_?2), FeSO, and Fe(SO₄) with formation constants of log β = ?2.84, log β = ?2.88, log β = 2.32, and log β = 3.83. The formation rate constants of the stepwise formation of the sulfate complexes are k_1a = 4.4 × 10³ M^?1 s^?1 for the ${\rm Fe}^{3+} + {\rm SO}_4^{2-}\,\stackrel{k_{1a}}{\rightleftharpoons}\, {\rm FeSO}_4^+The results of comprehensive equilibrium and kinetic studies of the iron(III)–sulfate system in aqueous solutions at I = 1.0 M (NaClO₄), in the concentration ranges of T = 0.15–0.3 mM, and at pH 0.7–2.5 are presented. The iron(III)–containing species detected are FeOH²⁺ (=FeH_?1), (FeOH) (=Fe₂H_?2), FeSO, and Fe(SO₄) with formation constants of log β = ?2.84, log β = ?2.88, log β = 2.32, and log β = 3.83. The formation rate constants of the stepwise formation of the sulfate complexes are k_1a = 4.4 × 10³ M^?1 s^?1 for the ${\rm Fe}^{3+} + {\rm SO}_4^{2-}\,\stackrel{k_{1a}}{\rightleftharpoons}\, {\rm FeSO}_4^+$ step and k₂ = 1.1 × 10³ M^?1 s^?1 for the ${\rm FeSO}_4^+ + {\rm SO}_4^{2-} \stackrel{k_2}{\rightleftharpoons}\, {\rm Fe}({\rm SO}_4)_2^-$ step. The mono‐sulfate complex is also formed in the ${\rm Fe}({\rm OH})^{2+} + {\rm SO}_4^{2-} \stackrel{k_{1b}}{\longrightarrow} {\rm FeSO}_4^+$ reaction with the k_1b = 2.7 × 10⁵ M^?1 s^?1 rate constant. The most surprising result is, however, that the 2 FeSO? Fe³⁺ + Fe(SO₄) equilibrium is established well before the system as a whole reaches its equilibrium state, and the main path of the formation of Fe(SO₄) is the above fast (on the stopped flow scale) equilibrium process. The use and advantages of our recently elaborated programs for the evaluation of equilibrium and kinetic experiments are briefly outlined. © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 40: 114–124, 2008     

Synthesis,properties, and gas permeability of novel poly(diarylacetylene) derivatives

Poly(diphenylacetylene)s having various silyl groups are soluble in common solvents, from whose membranes poly(diphenylacetylene) membranes can be obtained by desilylation. The oxygen permeability coefficients of the desilylated polymers are quite different from one another (120–3300 barrers) irrespective of the same polymer structure. When bulkier silyl groups are removed, the oxygen permeability increases to larger extents. Poly[1-aryl-2-p-(trimethylsilyl)phenylacetylene]s are soluble in common solvents, and afford free-standing membranes. These Si-containing polymer membranes are desilylated to give the membranes of poly[1-aryl-2-phenylacetylene]s. Both of the starting and desilylated polymers show very high thermal stability and high gas permeability. 1-Phenyl-2-p-(t-butyldimethylsiloxy)phenylacetylene polymerizes into a high-molecular-weight polymer. This polymer is soluble in common organic solvents to provide a free-standing membrane. Desilylation of this membrane yields a poly(diphenylacetylene) having free hydroxyl groups, which is the first example of a highly polar group-carrying poly(diphenylacetylene). The P/P and P/P permselectivity ratios of poly(1-phenyl-2-p-hydroxylphenylacetylene) membrane are as large as 47.8 and 45.8, respectively, while keeping relatively high P of 110 barrers. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5028–5038, 2006     

Microemulsion polymerization of cationic pyrroles bearing an imidazolum‐ionic liquid moiety

A cationic pyrrole derivative, N‐(4‐butyl‐(1‐methylimidazole)) pyrrole bromide (Py‐Br) bearing an imidazolium‐type ionic liquid moiety was synthesized. Microemulsion polymerization of Py‐Br in water/oil microemulsions produced poly(N‐(4‐butyl‐(1‐methylimidazole)) pyrrole bromide) (PPy‐Br) nanoparticles. The bromide anion of the resultant PPy‐Br nanoparticles was exchanged in water with different anions, including BF and PF to produce new nanoparticles bearing different counteranions. The results of thermal analysis indicate that the thermal stability of cationic PPy nanoparticles strongly depends on the nature of counteranion. As an application, water‐soluble PPy‐Br with fine fluorescence property was used as a new sensor for DNA detection. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 746–753, 2009     

Theoretical Studies on the Structures,Stabilities,Vibrational Spectra,and Thermodynamic Properties of Polyn itromethylbenzenes

The nitro derivatives of methylbenzenes were optimized to obtain their molecular geometries and electronic structures at the DFT‐B3LYP/6‐31G* level. The structure parameters, such as the C–NO₂ bond length (L) and the least C–NO₂ bond overlap population (M) were focused to predict their relative stability or sensitivity. Their IR spectra were obtained and assigned by vibrational analysis, which are reliable compared with the experimental results. Based on the frequencies scaled by 0.96 and the principle of statistic thermodynamics, the thermodynamic properties were evaluated, which are linearly related with the number of nitro and methyl groups as well as the temperature, obviously showing good group additivity.     

First‐principles calculations on the energetics,electronic structures and magnetism of SrFeO2

The electronic and magnetic properties of SrFeO₂ with different magnetic configurations have been calculated via the plane‐wave pseudopotential density functional theory method, using the experimental lattice parameters. The results give an antiferromagnetic ground state for SrFeO₂ with an absolute magnetic moment agreeing very well with the experimental report. In comparison with the counterparts whose magnetic moments are parallel to the c axis, the structures with spin moments parallel to the a (or b) axis exhibit no observable preference in total energy, but show different density distributions of the Fe 3d and Fe 3d states. The square‐planar crystal field splits the Fe 3d orbitals into a high‐level d, a low d, and intermediate d_xy and d_xz or d_yz components. The exchange splitting is larger than the crystal‐field splitting, resulting in the high‐spin Fe 3d states. Referred to the triplet O₂, the O‐vacancy formation energy from SrFeO₃ to SrFeO₂ has been deduced as well, along with its dependence on the temperature and O₂ partial pressure. © 2009 Wiley Periodicals, Inc. J Comput Chem 2009     

Synthesis of gradient copolysiloxanes by simultaneous copolymerization of cyclotrisiloxanes and mechanism for kinetics inverse between anionic and cationic ring‐opening polymerization

Trifluoropropylmethylsiloxane–phenylmethylsiloxane gradient copolysiloxanes were synthesized by anionic and cationic ring‐opening polymerization (ROP) of 1,3,5‐tris(trifluoropropylmethyl)cyclotrisiloxane ( ) and phenylmethylcyclotrisiloxane ( ). The analysis of reactivity ratios revealed that the reactivity of toward anionic ROP was higher than that of ; however, exhibited lower reactivity compared with during the cationic ROP. AB and BAB type gradient copolymers were obtained because of a difference in the reactivity of the monomers. The microstructure of copolymers was characterized by ²⁹Si NMR spectroscopy, gel permeation chromatography, and differential scanning calorimetry. Furthermore, the mechanism for kinetics inverse of copolymerization was proposed based on the results of the optimized molecular configuration. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 835–843     

Polymerization of carboxylic ester functionalized norbornenes catalyzed by (η3‐allyl)palladium complexes bearing N‐heterocyclic carbene ligands

An in situ generated cationic allylpalladium complex bearing N‐heterocyclic carbene (NHC) ligands, derived from the reaction of [(η³‐C₃H₅)Pd(NHC)Cl] with AgX (X = BF₄ or SbF₆), is an active catalyst for the addition polymerization of norbornene and norbornene derivatives [5‐norbornene‐2‐carboxylic acid methyl ester ( b ) and 5‐norbornene‐2‐carboxylic acid n‐butyl ester ( c )] with an ester group containing a large portion of endo‐isomers. The catalytic activities, polymer yields, molecular weights, and molecular weight distributions of polynorbornenes were investigated under various reaction conditions: the catalytic activity was highly dependent on the counteranion, the reaction solvent, and the reaction temperature. For b , as the portion of an endo‐isomer increased, the activity of 13 (SbF) was much higher than those of 14 and 15 , and for c (exo/endo = 95:5), the maximum turn over number (TON) was observed with 15 (SbF). © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3042–3052, 2007     

Primary radical termination and unimolecular termination in the heterogeneous polymerization of acrylamide initiated by a fluorinated azo‐derivative initiator: A kinetic study

Acrylamide was polymerized in acetonitrile at 82 °C with a perfluorinated azo‐derivative initiator. The polymerization proceeded heterogeneously. Varying amounts of initiator and monomer were used. The activation energy was deduced from three experiments carried out at 59, 71, and 82 °C. The following kinetic law, deviating a great deal from the classical law, was obtained: R ∼ [I₂][M](0.05% < [I₂]_o/[M]_o < 1.00%) and R ∼ [I₂][M](1% < [I₂]_o/[M]_o < 7%). These results can be interpreted in light of the contribution of primary radical termination and the emergence of occlusion. The development of a new kinetic relationship allowed us to confirm the existence of both of these termination reactions. The calculation of the k_prt /k_i · k_p ratio was also achieved. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1834–1843, 2000     

New simple method of measuring the surface glass transition temperature of polymers

A lap‐shear joint mechanical testing method has been probed to measure the surface glass transition temperature (T) of the thick bulk films of high‐molecular‐weight polymers. As T, the temperature transition “occurrence of autoadhesion–nonoccurrence of autoadhesion” has been proposed. The influence of chain flexibility, of molecular architecture, of polymer morphology, and of chain ends concentration on the T has been investigated. The correlation between the reduction in T with respect to the glass transition temperature of the bulk (T) and the intensity of the intermolecular interaction in the polymer bulk in amorphous polymers has been found. The effect of surface roughness on T has been discussed. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 2012–2021, 2010     

Structure and dissociation energy of weakly bound H (n = 5−8) complexes

The geometrical parameters, vibrational frequencies, and dissociation energies for H (n = 5–8) clusters have been investigated using high level ab initio quantum mechanical techniques with large basis sets. The highest level of theory employed in this study is TZ2P CCSD(T). The C₁ structure of H is predicted to be a global minimum, while the C_s structure of H is calculated to be a transition state. Harmonic vibrational frequencies are also determined at the DZP and TZ2P CCSD levels of theory. The dissociation energies, D_e, for H (n = 5–8) have been predicted using energy differences at each optimized geometry, and zero‐point vibrational energies (ZPVEs) are considered to compare with experimental values. The dissociation energies (D_o) have been predicted to be 1.69, 1.65, 1.65, and 1.46 kcal · mol for H, H, H (C₁ symmetry) and H, respectively, at the TZ2P CCSD(T) level of theory. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Key counter ion parameters governing polluted nafion membrane properties

Some properties of perfluorosulphonated ionomer membranes contaminated by a series of 10 counter ions were investigated by infrared spectroscopy (FTIR), thermogravimetric analysis coupled to mass spectroscopy (TG‐MS), and dynamic mechanical spectrometry (DMA). Distinctive parameters were extracted and regarded as a function of the cations' properties. An optimum interaction between sulfonate group and cation was found for cations with Lewis Acid Strength (LAS) in the 0.2–0.3 range. This critical value is found to be the Lewis Basic Strength (LBS‐) of the sulfonate anion in Nafion membrane. Thermal stability analyses also point out the influence of this cation parameter on the polymer degradation process. Cations with LAS values lower than LBS‐ improve the thermal stability of the side chains while cations with LAS values higher than LBS‐ enhance the thermal degradation. Moreover, the temperature of the modulus drop increases with the LAS of the counter ion. For cations with values lower 0.5, the transition is attributed to the glass relaxation of the polymer while for cations showing LAS values higher than 0.5, the loss of stiffness originates from the polymer thermal degradation process. The overview of the experimental data allows the definition of calibration curves as a function of the cations' LAS. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1381–1392, 2009     

Anthracene‐ and thiophene‐containing MEH‐PPE‐PPVs: Synthesis and study of the effect of the aromatic ring position on the photophysical and electrochemical properties

This contribution reports on the synthesis and characterization of thiophene‐ ( P1 , P2 , and P3 ) and anthracene‐ ( P4 and P5) containing PPE‐PPV copolymers. The thermostable, soluble and film‐forming polymers were fully characterized by NMR, IR and ELEM . ANAL .; they exhibit high molar masses with polydispersity indices below 2.5. The position of the thiophene in the polymeric backbone has insignificant influence on the spectroscopic properties of the polymers. In contrast, the anthracene‐containing polymers reveal position dependent optical properties. A constant bathochromic shift of 50 nm was observed going from P4 , where anthracene is surrounded by two double bonds, to P5 , where anthracene is at the bridge between a triple bond and a double bond, as well as from P5 to P6 where anthracene is surrounded by two triple bonds. This correlates to the decrease of the observed anthracene band around 255 nm going from P4 through P5 to P6 , amounting to the degree of contribution of the anthracene unit to the main chain conjugation. The phenomenon known as CN‐PPV effect was observed in the case of P4 [Φ_f (solution) = 3%, Φ_f (solid) = 13%]. Electrochemical studies carried out under absolute inert conditions revealed lower electrochemical band gap energies, E , than E . © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2243–2261, 2009     

Aryl‐Copper(III)‐Acetylides as Key Intermediates in CCsp Model Couplings under Mild Conditions

The mechanism of copper‐mediated Sonogashira couplings (so‐called Stephens–Castro and Miura couplings) is not well understood and lacks clear comprehension. In this work, the reactivity of a well‐defined aryl‐Cu^III species ( 1 ) with p‐R‐phenylacetylenes (R=NO₂, CF₃, H) is reported and it is found that facile reductive elimination from a putative aryl‐Cu^III‐acetylide species occurs at room temperature to afford the C_aryl?C_sp coupling species ( I_R ), which in turn undergo an intramolecular reorganisation to afford final heterocyclic products containing 2H‐isoindole ( P , P , P_Ha ) or 1,2‐dihydroisoquinoline ( P_Hb ) substructures. Density Functional Theory (DFT) studies support the postulated reductive elimination pathway that leads to the formation of C?C_sp bonds and provide the clue to understand the divergent intramolecular reorganisation when p‐H‐phenylacetylene is used. Mechanistic insights and the very mild experimental conditions to effect C_aryl?C_sp coupling in these model systems provide important insights for developing milder copper‐catalysed C_aryl?C_sp coupling reactions with standard substrates in the future.