Speciation analysis of inorganic antimony in soil using HPLC-ID-ICP-MS

Speciation analysis of Sb(III) and Sb(V) in a soil sample was performed through extraction and on-line isotope dilution concentration determination after a chromatographic separation. The total Sb concentration found in a through traffic contaminated soil sample was (4.17 μg g⁻¹, 0.3 μg g⁻¹ SD, n=6). It was determined using ICP-MS after soil digestion using the sodium peroxide sintering method. The optimized extraction procedure for speciation analysis was carried out using 100 mmol L⁻¹ citric acid at pH 2.08 by applying an ultrasonic bath for 45 min at room temperature. The effects of citric acid concentration (0–500 mmol L⁻¹), pH (1–6), and temperature (30–60°C) on inorganic antimony species distribution in the examined sample were studied and optimized. The separation of Sb(III) and Sb(V) was achieved using an anion exchange column (PRP-X100) and 10 mmol L⁻¹ EDTA and 1 mmol L⁻¹ phthalic acid at pH 4.5 as a mobile phase. The eluent from the HPLC was mixed with an enriched (94.2%) ¹²³Sb spike solution that was pumped by a peristaltic pump with a constant flow rate (0.5 mL min⁻¹) in a three-way valve. The blend passed directly to the Conikal nebulizer of the ICP-MS. By using the above extraction procedure and methodology, 43.2% Sb(V) (2.9% RSD, n=3) and 6.0% Sb(III) (1.3% RSD, n=3) of total Sb found in the sample could be detected. The detection limits achieved by the proposed method were 20 ng L⁻¹ and 65 ng L⁻¹ for Sb(V) and Sb(III), respectively. The precision, evaluated by using RSD with 100 ng L⁻¹ calibration solutions, was 2.7% and 3.2% (n=6) for Sb(V) and Sb(III), respectively, in aqueous solutions.     

Determination and Pharmacokinetic Study of 10-O-Dimethylaminoethylginkgolide B in Rat Plasma by LC–MS

To evaluate the pharmacokinetics of a novel analogue of ginkgolide B, 10-O-dimethylaminoethylginkgolide B (XQ-1) in rat plasma in pre-clinical studies, a sensitive and specific liquid chromatographic method with electrospray ionization mass spectrometry detection (LC–ESI–MS) was developed and validated. After a simple extraction with ethyl acetate, XQ-1 was analyzed on a Shim-pack C18 column with a mobile phase of a mixture of 1 μmol L⁻¹ ammonium acetate containing 0.02% formic acid and methanol (55:45, v/v) at a flowrate of 0.3 mL min⁻¹. Detection was performed in selected ion monitoring (SIM) mode using target ions at [M + H]⁺ m/z 496.05 for XQ-1 and m/z 432.10 for the internal standard (lafutidine). Linearity was established for the concentration range from 2 to 1,000 ng mL⁻¹ . The extraction recoveries ranged from 86.0 to 89.9% in plasma at concentrations of 5, 50, and 500 ng mL⁻¹. The lower limit of quantification was 2 ng mL⁻¹ with 100 μL plasma. The validated method was successfully applied to a pharmacokinetic study after intragastic administration of XQ-1 mesylate in rats at a dose of 20 mg kg⁻¹.     

Polar herbicides,pharmaceutical products,perfluorooctanesulfonate (PFOS), perfluorooctanoate (PFOA), and nonylphenol and its carboxylates and ethoxylates in surface and tap waters around Lake Maggiore in Northern Italy

A survey of contamination of surface and drinking waters around Lake Maggiore in Northern Italy with polar anthropogenic environmental pollutants has been conducted. The target analytes were polar herbicides, pharmaceuticals (including antibiotics), steroid estrogens, perfluorooctanesulfonate (PFOS), perfluoroalkyl carboxylates (including perfluorooctanoate PFOA), nonylphenol and its carboxylates and ethoxylates (NPEO surfactants), and triclosan, a bactericide used in personal-care products. Analysis of water samples was performed by solid-phase extraction (SPE) then liquid chromatography–triple-quadrupole (tandem) mass spectrometry (LC–MS–MS). By extraction of 1-L water samples and concentration of the extract to 100 μL, method detection limits (MDLs) as low as 0.05–0.1 ng L⁻¹ were achieved for most compounds. Lake-water samples from seven different locations in the Southern part of Lake Maggiore and eleven samples from different tributary rivers and creeks were investigated. Rain water was also analyzed to investigate atmospheric input of the contaminants. Compounds regularly detected at very low concentrations in the lake water included: caffeine (max. concentration 124 ng L⁻¹), the herbicides terbutylazine (7 ng L⁻¹), atrazine (5 ng L⁻¹), simazine (16 ng L⁻¹), diuron (11 ng L⁻¹), and atrazine-desethyl (11 ng L⁻¹), the pharmaceuticals carbamazepine (9 ng L⁻¹), sulfamethoxazole (10 ng L⁻¹), gemfibrozil (1.7 ng L⁻¹), and benzafibrate (1.2 ng L⁻¹), the surfactant metabolite nonylphenol (15 ng L⁻¹), its carboxylates (NPE₁C 120 ng L⁻¹, NPE₂C 7 ng L⁻¹, NPE₃C 15 ng L⁻¹) and ethoxylates (NPE _n Os, n = 3-17; 300 ng L⁻¹), perfluorinated surfactants (PFOS 9 ng L⁻¹, PFOA 3 ng L⁻¹), and estrone (0.4 ng L⁻¹). Levels of these compounds in drinking water produced from Lake Maggiore were almost identical with those found in the lake itself, revealing the poor performance of sand filtration and chlorination applied by the local waterworks.     

Use of Experimental Design to Develop a Method for Analysis of 1,3-Dichloropropene Isomers in Water by HS-SPME and GC–ECD

A simple and reliable method has been established for determination of cis and trans-1,3-dichloropropene (1,3-DCP) in water by headspace solid-phase microextraction (HS-SPME) then GC–ECD. An experimental design with two steps was performed to determine the best experimental conditions for extraction of the 1,3-DCP isomers. First, a 2⁶⁻² fractional factorial design was conducted to screen for significant conditions. Second, a central composite design (CCD) was performed to optimise the variables. The best experimental extraction conditions were: polydimethylsiloxane–divinylbenzene (PDMS–DVB)-coated fibre, 20-min extraction time, 12 °C extraction temperature, 300 g L⁻¹ NaCl, and 20 mL headspace volume in 40-mL vial. Under these conditions the method detection limit (MDL) was 0.5 ng L⁻¹ for cis-1,3-DCP and 1.0 ng L⁻¹ for trans-1,3-DCP. The method quantification limit (MQL) was 1.2 ng L⁻¹ for cis-1,3-DCP and 3.0 ng L⁻¹ for trans-1,3-DCP. For both isomers the relative standard deviation (RSD) for analysis of 50 ng L⁻¹ or 0.5 μg L⁻¹ of the isomer mixture was less than 8%. When the proposed method was applied to surface (river) water and tapwater samples from Gipuzkoa province (Spain) the target analytes were not detected. The method was also used to investigate the presence of the isomers in leachates from agricultural soil. A mixed solution was added to samples of two different soils and 1,3-DCP isomers were quantified in leachate obtained from the samples.     

A simple flow injection spectrophotometric determination method for iron(III) based on O-acetylsalicylhydroxamic acid complexation

A simple and rapid flow-injection spectrophotometric method for the determination of iron(III) and total iron is proposed. The method is based on the reaction between iron(III) and O-acetylsalicylhydroxamic acid (AcSHA) in a 2 % methanol solution resulting in an intense violet complex with strong absorption at 475 nm. Optimum conditions for the determination of iron(III) and the interfering ions were tested. The relative standard deviation for the determination of 5 μg L⁻¹ iron(III) was 0.85 % (n = 10), and the limit of detection (blank signal plus three times the standard deviation of the blank) was 0.5 μg L⁻¹, both based on the injection volumes of 20 μL. The method was successfully applied in the determination of iron(III) and total iron in water and ore samples. The method was verified by analysing a certified reference material Zn/Al/Cu 43XZ3F and also by the AAS method.     

Multiresidue procedures for determination of triazine and organophosphorus pesticides in water by use of large-volume PTV injection in gas chromatography

Summary Two procedures, based on large-volume injection with a programmed-temperature vaporizer (PTV), have been developed for the determination of several triazine and organophosphorus pesticides. The use of PTV for injection in gas chromatography (GC) has enabled the introduction of up to 200 μL sample extract into the GC, thus increasing the sensitivity of the method. PTV injection has been combined off-line with two different microextraction procedures—liquid-liquid partition and solid-phase extraction. A simple and rapid off-line liquid-liquid microextraction procedure (5 mL water/1 mL methyltert-butyl ether) was applied to surface water samples spiked at levels between 0.01 and 5μg L⁻¹. Recoveries of the overall procedure were >80% and the precision was better than 15%. Detection limits were <30 ngL⁻¹ from 200-μL injections in GC-NPD analysis of triazines and GC-FPD analysis of organophosphorus pesticides. Off-line automated solid-phase extraction with C₁₈ cartridges has been applied to water samples (50 mL) spiked at 0.01, 0.1 and 1 μg L⁻¹. The overall procedure was satisfactory (recoveries >80% and coefficients of variation <12%) and the limits of detection ranged from 1 to 9 ng L⁻¹. Finally, several surface water samples were anlysed, and triazine herbicides were detected at concentrations of approx. 0.1–0.2 μg L⁻¹. The results were similar to those obtained by conventional solvent extraction then GC-MSD after splitless injection of 2 μL.     

Preparation of antibodies and development of a sensitive immunoassay with fluorescence detection for triazine herbicides

Specific polyclonal antibodies against s-triazine herbicides were obtained by preparing immunogens coupling home-synthesized haptens derivatives of simazine (6-chloro-N-ethyl-N′-ethyl-1,3,5-triazine-2,4-diamine) to lysine groups of hemocyanin from keyhole limpets and bovine serum albumin carrier proteins. Three highly sensitive rabbit antisera were obtained and evaluated with a battery of six enzyme tracers derived from triazine structures in an optimized ELISA format. The antiserum As8 and the HRP-2f tracer, which yield the best assay sensitivity for simazine (detection limit 0.11 ± 0.02 μg L⁻¹, IC₅₀ 0.88 ± 0.04 μg L⁻¹), were applied to the development of a sensitive flow-through immunoassay for the analysis of this herbicide. The automated assay was based on a direct competitive immunosorbent assay and fluorescence detection. The optimized method presents an IC₅₀ value of 0.35 ± 0.04 μg L⁻¹ with a detection limit of 1.3 ± 0.9 ng L⁻¹ and a dynamic range from 0.010 to 7.5 μg L⁻¹ simazine. The generic nature of the antiserum was shown by good relative cross-reactivities with other triazines such as atrazine (420%) or propazine (130%) and a lower response to terbutylazine (6.4%) and desethyl-atrazine (2.2%). No cross-reactivity was obtained for nonrelated pesticides such as 2,4-dichlorophenoxyacetic acid or linuron and the assay could be applied as a screening method for triazine herbicides. The total analysis time was 30 min per determination and the immunosensor could be reused for more than 150 cycles without significant loss of activity. The immunosensor has been successfully applied to the direct analysis of simazine in surface water samples at the nanogram per liter level. The results obtained by comparative analysis of the immunosensor with a chromatographic procedure for triazines showed a close correspondence.     

Determination of vitamin B<Subscript>1</Subscript> in seawater and microalgal fermentation media by high-performance liquid chromatography with fluorescence detection

A highly sensitive high-performance liquid chromatographic method with fluorescence detection has been developed for determination of vitamin B₁. Vitamin B₁ was converted into a fluorescent compound by treatment with hydrogen peroxide–horseradish peroxidase and the derivative was subsequently analyzed by HPLC on a Waters Spherisorb ODS2 column (250 mm×4.6 mm ID, 5 μm) with 40:60 methanol–pH 8.5 acetate buffer solution as mobile phase and fluorescence detection at 440 nm (with excitation at 375 nm). The calibration graph was linear from 5.00×10⁻¹⁰ mol L⁻¹ to 5.00×10⁻⁷ mol L⁻¹ for vitamin B₁ with a correlation coefficient of 0.9991 (n=9). The detection limit was 1.0×10⁻¹⁰ mol L⁻¹. The method was successfully used for determination of vitamin B₁ at pg mL⁻¹ levels in microalgal fermentation media and seawater after solid-phase extraction. Recovery was from 89 to 110% and the relative standard deviation was in the range 1.1 to 4.3%.     

Simultaneous ion chromatographic determination of selenium and metal ions in waters at trace level

Summary An ion-chromatographic procedure is described for the determination of selenium (VI) at μg L⁻¹ level in the presence of anions and heavy metal ions. Maximum permissible concentrations and effects from each interfering substance were investigated for the Se concentration range 12.5–1,000 μg L⁻¹. The method, optimized for the detection of SeO ₄ ²⁻ , gives results suitable for speciation analysis. Total selenium can be determined after complete conversion to selenate ion by oxidation with KMnO₄. The detection limit of selenium is 4.8 μg L⁻¹ (0.96 ng for 200 μL sample). Paper presented at the 41st Pittsburgh Conference, New York, March 5–9, 1990.     

Determination of Pyrethroid Insecticide Deltamethrin by Micellar Liquid Chromatography with Spectrophotometric Detection

A simple micellar liquid chromatographic technique for deltamethrin determination was developed and validated. The method provided to be suitable for deltamethrin determination in pediculicide shampoo. Kromasil C18 column (150 mm×4.6 mm, 5 μm) and mobile phase −0.12 M sodium dodecyl sulfate with 9% (v/v) 1-butanol were used for deltamethrin separation. Detection wavelength was 265 nm. The retention time was about 15 min. Different validation parameters were evaluated. The specificity of the method was demonstrated. Linearity was established in the range 10–40 μg L⁻¹. The limits of detection and quantitation were 1.06 and 3.22 μg mL⁻¹, respectively. The method showed excellent accuracy (100.6%) and precision (repeatability) gave a relative standard deviation of less than 1%. The influence of the various method parameters (robustness study) was also studied.     

Environmental monitoring of phenolic pollutants in water by cloud point extraction prior to micellar electrokinetic chromatography

Many aromatic compounds can be found in the environment as a result of anthropogenic activities and some of them are highly toxic. The need to determine low concentrations of pollutants requires analytical methods with high sensitivity, selectivity, and resolution for application to soil, sediment, water, and other environmental samples. Complex sample preparation involving analyte isolation and enrichment is generally necessary before the final analysis. The present paper outlines a novel, simple, low-cost, and environmentally friendly method for the simultaneous determination of p-nitrophenol (PNP), p-aminophenol (PAP), and hydroquinone (HQ) by micellar electrokinetic capillary chromatography after preconcentration by cloud point extraction. Enrichment factors of 180 to 200 were achieved. The limits of detection of the analytes for the preconcentration of 50-ml sample volume were 0.10 μg L⁻¹ for PNP, 0.20 μg L⁻¹ for PAP, and 0.16 μg L⁻¹ for HQ. The optimized procedure was applied to the determination of phenolic pollutants in natural waters from San Luis, Argentina. Figure Schematic representation of the cloud point extraction process.     

Determination of gastrodin,p-hydroxybenzyl alcohol, vanillyl alcohol,p-hydroxylbenzaldehyde and vanillin in tall gastrodia tuber by high-performance liquid chromatography

Summary A high-performance liquid chromatographic method for the separation and determination of gastrodin,p-hydroxybenzyl alcohol, vanillyl alcohol,p-hydroxylbenzaldehyde and vanillin in extract of Chinese herbal medicine tall gastrodia tuber (Chinese name: Tianma) was established. The chromatographic conditions were optimized by means of computer-assisted method development technique. Dry-Lab software was used to model the retention behavior of the compounds as a function of gradient conditions, based on the data from two scouting gradient runs. Under the optimized conditions: column, Kromasil-C18, 5 μm, 15×0.46-cm; solvent A, water; solvent B, methanol; gradient, 5/44/65/65% B at 0/9/12/15 min; flow rate, 1.00 mL min⁻¹; temperature, ambient, the quality of tall gastrodia tubers from different sources and tianma injection were examined.     

Molecularly imprinted polymer solid-phase extraction coupled to square wave voltammetry at carbon fibre microelectrodes for the determination of fenbendazole in beef liver

A molecularly imprinted polymer was developed and used for solid-phase extraction (MISPE) of the antihelmintic fenbendazole in beef liver samples. Detection of the analyte was accomplished using square wave voltammetry (SWV) at a cylindrical carbon fibre microelectrode (CFME). A mixture of MeOH/HAc (9:1) was employed both as eluent in the MISPE system and as working medium for electrochemical detection of fenbendazole. The limit of detection was 1.9 × 10⁻⁷ mol L⁻¹ (57 μg L⁻¹), which was appropriate for the determination of fenbendazole at the maximum residue level permitted by the European Commission (500 μg kg⁻¹ in liver). Given that the SW voltammetric analysis could not be directly performed in the sample extract as a consequence of interference from some sample components, a sample clean-up with a MIP for selectively retaining fenbendazole was performed. The MIP was synthesized using a 1:8:22 template/methacrylic acid/ethylene glycol dimethacrylate ratio. A Britton–Robinson Buffer of pH 9.0 was selected for retaining fenbendazole in the MIP cartridges, and an eluent volume of 5.0 mL at a flow rate of 2.0 mL min⁻¹ was chosen in the elution step. Cross-reactivity with the MIP was observed for other benzimidazoles. The synthesized MIP exhibited a good selectivity for benzimidazoles with respect to other veterinary drugs. The applicability of the MISPE-SWV method was tested with beef liver samples, spiked with fenbendazole at 5,000 and 500 μg kg⁻¹. Results obtained for ten different liver samples yielded mean recoveries of (95 ± 12)% and (96 ± 11)% for the upper and lower concentration level, respectively.     

Simultaneous Determination of Six Active Compounds in Rhodiola L. by RP-LC

Rhodiola L. has a long history as traditional Chinese medicine (TCM) with a medicinal efficacy similar to Ginseng and Manyprickle Acathopanax roots. There exist three classes of important active constituents, i.e., phenylethanoids (salidroside, p-tyrosol), phenylpropanoides (rosarin, rosavin, rosin), and monoterpene (rosiridin) in this TCM. In this study, by optimizing the extraction, separation and analytical conditions, a sensitive and accurate high performance liquid chromatographic method has been developed for the simultaneous determination of the six active compounds in the different species of Rhodioa L. for the first time. The analysis was performed on a Purospher STAR C18 column at 30 °C using 20 mmol L⁻¹ aqueous ammonia acetate/methanol gradient system at a flow rate of 1.0 mL min⁻¹ and photodiode array detection (DAD ) at wavelengths 276, 250 and 205 nm, respectively. The optimized method provided good linear relation (r ² > 0.9993 for all the target compounds), satisfactory precision (RSD values less than 1.53%) and good recovery (from 96.3–104.8%). The limits of detection ranged between 0.012 and 0.047 μg mL⁻¹ for the different analytes. The developed method has been successfully applied to analysis and quality control of Rhodiola L.     

Study on an on-line molecularly imprinted solid-phase extraction coupled to high-performance liquid chromatography for separation and determination of trace estrone in environment

Estrone is one of the important potential endocrine-disrupting compounds, and the sensitive and reliable analytical methods for the determination of estrone are required for the assurance of human health. In this paper, using estrone as template molecule, 3-aminopropyltriethoxysilane as function monomer, and tetraethoxysilicane as cross-linker, a highly selective molecularly imprinted microsphere was synthesized by surface molecular imprinting technique combined with a sol–gel process. The imprinted material was characterized by the Fourier transform infrared and static adsorption experiments, and the results showed that it exhibited good recognition and selective ability for estrone. A novel method for separation and determination of trace estrone in environmental sample was developed using on-line molecularly imprinted solid-phase extraction coupled to high-performance liquid chromatography. With a sample loading flow rate of 2.6 mL min⁻¹ for a 9.6-min extraction, the enrichment factor obtained by the slopes of the linear portion in comparison with the direct injection of 10 μL standard sample solution was 1,045. The detection limit (S/N = 3) was 5.7 ng L⁻¹, and the relative standard deviations for nine replicate extractions of 5.0 μg L⁻¹ estrone was less than 10.0%. This method was evaluated for quantitative determination of estrone in well and lake water samples spiked at two levels (0.5 and 1.0 μg L⁻¹) with recoveries ranging from 86% to 95%.      

IC Determination of Halide Impurities in Ionic Liquids

An ion chromatographic (IC) method has been developed for determination of trace levels of halide impurities in various types of ionic liquids (ILs). The advantage of this method is that all relevant halide species can be measured in a single chromatographic analysis. Separation of halides was performed on a Dionex AS9-HC column using an eluent consisting of 20 mM NaOH and 10% (v/v) acetonitrile, delivered at 1.5 mL min⁻¹. Using this eluent, fluoride, chloride and bromide were well resolved from each other, but iodide was co-eluted with tetrafluoroborate (BF₄⁻) present as a counter-anion in tetrafluoroborate-based ILs. The same eluent was also used successfully for the determination of halides in highly hydrophobic ILs, such as those based on bis-(trifluoromethanesulfonyl)imide (TFSI⁻) and bis-perfluoroethylsulfonylimide (BETI⁻). In this case, 50% (v/v) acetonitrile aqueous was needed to dissolve the sample before injection, and this did not adversely affect the separation. Detection limits in the measured solution were 0.1, 0.2 and 1.0 ppm for chloride, bromide and iodide, respectively, by conductivity detection, and 0.02 ppm for iodide by UV detection.     

Determination by LC of Polyphenols in Italian Red Wine

A reversed-phase liquid chromatographic method, optimised for the separation of trans-, and cis-resveratrol, catechin, epicatechin, quercetin and rutin, is reported. Separation was achieved using a C18 column and a gradient elution with acetonitrile and 5% formic acid aqueous solution. The analyses required an equilibration period of 10 min and a run time of 25 min for completion. Identification was based on retention characteristics and by relative UV spectra, obtained by photodiode array detector and were compared with commercial standards. Analyses were performed without any sample pre-treatment. Detection was carried out by UV–Vis detector at three different wavelengths. The detection limit ranged from 0.16 μgm L⁻¹ (cis-resveratrol) to 1.5 μgm L⁻¹ (+)-catechin. Investigation was extended to quantitative determination of phenol compounds in Italian red wine and to investigate the stability of the six antioxidants.     

Determination of alkaloids in Corydalis yanhusuo using hollow-fibre liquid phase microextraction and high performance liquid chromatography

Hollow fibre based liquid phase microextraction (HF-LPME) with high performance liquid chromatography (HPLC) was developed for the determination of alkaloids in Corydalis yanhusuo. Three alkaloids (protopine, tetrahydropalmatine, tetrahydroberberine) were extracted from a 10 mL alkaline sample (donor phase) to an organic phase impregnated in the pores of the hollow fibre, and then, they were extracted to an acidic solution (acceptor phase) in the lumen of the fibre. The extract was determined directly by HPLC. Parameters affecting the HF-LPME include the organic solvent, pH of the donor and the acceptor phase, the extraction time and the stirring speed were investigated systematically. To minimize the error of the injection, palmatine was added as an internal standard (I.S.). Under optimal conditions, calibration curves were obtained in the range of 0.1–1.0 mg L⁻¹ with a reasonable linearity (r ² > 0.993) and the limits of detection (LODs) ranged between 10.0 × 10⁻³ mg L⁻¹ and 13.7 × 10⁻³ mg L⁻¹. Additionally, enrichment factors with 100 to 184-fold were obtained. The method was then applied to the crude extract of Corydalis yanhusuo successfully.     

A Capillary GC Method Using Nitrogen Phosphorus Detection for Determination of Topiramate in Patients with Epilepsy

A new capillary gas chromatographic assay with nitrogen phosphorus detection for the determination of topiramate in the serum was developed and validated. The sample procedure included a liquid–liquid extraction of 0.1 mL of alkalized sample with ethyl acetate. The organic solvent was evaporated, and flash methylation of topiramate and internal standard 5-(p-methylphenyl)-5-phenylhydantoin with trimethylanilinium hydroxide (0.07 mol L⁻¹ in methanol) was performed. The structure of derivatization product was confirmed using gas chromatography–mass spectrometry. Validation experiments certified suitability of bioanalytical method in the monitoring of serum concentrations in epileptic patients. The limit of detection was found to be 1.69 μmol L⁻¹. The range of applicability and linearity was established from 4.35 to 69.62 μmol L⁻¹. The accuracy and precision reached acceptable values from 86.15 to 109.5% (recovery) respectively, values were from 2.19 to 11.03% (RSD). No interference was found from endogenous substances or studied antiepileptic drugs.     

Separation ofN-carbamoyl aspartate andl-dihydroorotate from serum by high-performance liquid chromatography with fluorimetric detection

Summary A high-performance liquid chromatographic method, with 9-anthryldiazomethane as derivatizing agent, has been developed for the simultaneous determination ofN-carbamoyl aspartate andl-dihydroorotate in serum. Sample preparation for 1 mL serum was by simple liquid-liquid extraction and then derivatization. The compounds were separated on a Luna C18(2) column by use of a gradient prepared from acetonitrile and 10 mM sodium acetate buffer, pH 6.0, and fluorimetric detection was performed at excitation and emission wavelengths of 365 nm and 412 nm, respectively. The response was found to be linearly dependent on concentration between 0.8 and 60 μg mL⁻¹ forl-dihydrooratate and between 0.9 and 90 μg mL⁻¹ forN-carbamoyl aspartate; the mean recovery rates were 50 and 51%, respectively. The limits of detection and quantification were 0.33 μg mL⁻¹ and 0.6 μg mL⁻¹, respectively, forl-dihydroorotate and 0.4 μg mL⁻¹ and 0.7 μg mL⁻¹ forN-carbamoyl aspartate. This method can be used to assess accumulation ofN-carbamoyl aspartate andl-dihydroorotate in body fluids in situations where cellular pyrimidine de novo synthesis is impaired.