氯化镁增塑改性聚乙烯醇

以氯化镁为增塑剂, 采用流延法制备了增塑改性聚乙烯醇(PVA). 研究了氯化镁与PVA的相互作用以及氯化镁增塑改性PVA的结晶性能、 热性能和机械性能. 研究结果表明, 氯化镁能与PVA大分子发生较强的相互作用, 从而破坏PVA分子链内和链间的氢键, 降低PVA的结晶度. 氯化镁对PVA的热性能影响显著, PVA在加入氯化镁后的热分解过程由纯PVA的两段失重过程转变成三段失重过程. 氯化镁可有效增塑PVA, 其玻璃化转变温度降低, 拉伸强度下降, 断裂伸长率上升, 储能模量下降.     

氯化镁/聚乙二醇复配增塑剂热塑加工聚乙烯醇

采用氯化镁和聚乙二醇对聚乙烯醇(PVA)进行增塑改性, 并利用熔融加工方法制备了PVA薄膜.采用傅里叶变换红外光谱(FTIR)、X射线衍射(XRD)、差示扫描量热分析(DSC)和热重分析(TGA)方法研究了由氯化镁和聚乙二醇组成的复配增塑剂与PVA的相互作用及复配增塑剂对PVA结晶性能、热性能和力学性能的影响.结果表明, 由氯化镁和聚乙二醇组成的复配增塑剂能有效地破坏PVA自身的氢键, 降低PVA的结晶度和熔融温度, 提高PVA的热稳定性并扩展PVA的热塑加工温度窗口.由复配增塑剂通过热塑加工方法制得的PVA薄膜具有较好的力学性能, 拉伸强度为31 MPa, 断裂伸长率为466%.     

六水合硝酸镁增塑改性淀粉-聚乙烯醇复合膜的合成与性能

以六水合硝酸镁[Mg(NO₃)₂·6H₂O]为增塑剂, 采用流延法制备了增塑改性的淀粉-聚乙烯醇(PVA)复合膜, 并研究了改性后淀粉-PVA复合膜的性能. 研究结果表明, Mg(NO₃)₂·6H₂O与淀粉和PVA发生一定的相互作用, 破坏了淀粉和PVA中的结晶结构. 因此, Mg(NO₃)₂·6H₂O的加入可提高淀粉与PVA间的相容性, 改变了淀粉-PVA复合膜的力学性能, 使其拉伸强度下降, 断裂伸长率提高.     

二乙酸甘油酯封端的齐聚L-丙交酯增塑改性聚L-丙交酯薄膜

以二乙酸甘油酯(GD)引发L-丙交酯(LLA)开环聚合合成了二乙酸甘油酯封端的齐聚L-丙交酯(OGLA),并以此为增塑剂,以溶液共混法制备了OGLA与高分子量聚L-丙交酯(PLLA)的共混膜.采用DSC研究了共混膜的T_g和结晶性变化,考察了共混膜的力学性能和渗出性.结果表明:随着OGLA含量的增加,共混物T_g下降,结晶度降低,柔性提高;与聚乳酸相比,随着OGLA含量的增加,拉伸强度、弹性模量有一定程度降低,但断裂伸长率有较大程度的提高,力学性能得到较好的平衡;OGLA增塑体系与GD增塑体系相比较,优势在于避免了小分子增塑剂的渗出.     

氯化镁/氯化1-丁基-3-甲基咪唑改性淀粉/聚丁二酸丁二醇酯共混材料的结构与性能

用氯化镁/氯化1-丁基-3-甲基咪唑([BMIM]Cl)复合增塑剂改性淀粉/聚丁二酸丁二醇酯(PBS)共混材料,采用红外光谱(FTIR)、扫描电子显微镜(SEM)、差示扫描量热分析(DSC)、X射线衍射分析(XRD)及力学性能测试等方法研究了氯化镁/[BMIM]Cl改性淀粉/PBS共混材料的结构和性能.结果表明,氯化镁能与淀粉及PBS形成较强的相互作用,从而破坏淀粉及PBS原有的氢键,导致淀粉/PBS共混体系结构和性能的改变.与[BMIM]Cl改性体系相比,氯化镁/[BMIM]Cl改性体系能进一步增强淀粉与PBS的界面结合力,提高共混体系的相容性;使淀粉/PBS的熔融焓、结晶度及结晶温度降低,冷结晶温度升高;提高共混体系的力学强度和断裂伸长率,抑制[BMIM]Cl因高效增塑产生的强度降低作用.采用氯化镁/[BMIM]Cl改性淀粉/PBS可制备出具有良好力学性能的淀粉/PBS共混材料.     

新型聚酯增塑剂的合成及增塑聚氯乙烯性能

以生物质化工产品衣康酸加氢产物2-甲基丁二酸为原料,采用熔融缩聚法制备了一种新型聚酯增塑剂聚2-甲基丁二酸1,3-丙二醇酯,采用红外光谱(FTIR)和核磁共振(1H NMR)对聚酯的结构进行了表征.通过扫描电镜(SEM)、动态力学分析(DMA)、拉伸测试对该聚酯增塑聚氯乙烯(PVC)的增塑效果进行的表征结果表明,该聚酯与PVC相容性良好,可大大改善PVC材料的硬度,增加其断裂伸长率,降低PVC的玻璃化转变温度、拉伸强度及拉伸模量.与小分子增塑剂邻苯二甲酸二辛酯(DOP)相比,合成的新型聚酯增塑剂具有优异的耐抽出性、耐挥发性和耐迁移性,可提高PVC材料的使用寿命.     

木质素磺酸钙与聚乙烯醇的相互作用及共混材料的性能

采用热分析、扫描电镜、力学性能测试方法研究了木质素磺酸钙(HLS)与PVA的相互作用及HLS对PVA热性能、结晶性能和力学性能的影响.结果表明,HLS可均匀分布在PVA基体中,HLS与PVA的FloryHuggins相互作用参数为负值(≈-0.0002),意味着HLS与PVA间存在强相互作用,具有良好的相容性,在熔融状态下可混容;HLS可降低PVA的平衡熔点,提高PVA的热分解温度,拓宽PVA的热塑加工温度窗口;HLS可抑制PVA结晶,对PVA起增强作用,使HLS/PVA共混膜的拉伸强度和杨氏模量升高,断裂伸长率减小,35%HLS可使PVA的拉伸强度和杨氏模量分别提高91.9%和604.7%.     

碱催化PVA酯化交联膜的制备

在氢氧化钠催化条件下,将聚乙烯醇(PVA)与草酸(OA)酯化交联,制得了一种新的PVA-OA均质膜并利用红外光谱表征了交联膜的化学结构。考察了均质膜的耐水性能和机械性能,发现随着交联度的增加,其耐水性和拉伸强度增强,而断裂伸长率下降。将PVA与聚偏氟乙烯(PVDF)制成PVA/PVDF蒸汽渗透膜复合膜,利用乙醇-水混合物考察了其分离性能,结果表明PVA理论交联度在6%～7%时,其综合性能较优。     

木质素/氧化锌复合颗粒的制备及在水性聚氨酯中的应用

通过沉淀法以季铵化木质素(LQAs)、醋酸锌和NaOH为原料制备了不同木质素负载量的木质素/氧化锌(LQAs/ZnO)复合颗粒.测试结果表明,LQAs/ZnO复合颗粒是由LQAs和ZnO形成的杂化结构,且NaOH用量对LQAs/ZnO复合颗粒的形貌有显著影响.与纯ZnO相比,复合颗粒对紫外光的吸收明显增强.此外,探究了复合颗粒掺杂改性的水性聚氨酯(WPU)复合薄膜的光学和力学性能.与0.6%(质量分数)的LQAs/ZnO复合颗粒均匀共混成膜的WPU复合薄膜的断裂拉伸强度和断裂伸长率相较于纯WPU薄膜,分别提高了81.5%和10.9%.经过192h紫外光老化测试后,断裂拉伸强度保持在25 MPa以上,断裂伸长率保持在360%以上,表明LQAs/ZnO复合颗粒可有效提高WPU薄膜的紫外屏蔽性能和抗紫外老化性能.     

新型热塑性淀粉的制备和性能

以二甲基亚砜(DMSO)为增塑剂, 通过熔融共混法制备了一种新型热塑性淀粉(TPS), 研究不同增塑剂含量对材料结构和性能的影响, 并与甘油及甘油/水复合增塑淀粉体系进行了比较. FTIR结果显示, DMSO能够与淀粉产生强烈而稳定的氢键相互作用. WAXD和SEM的研究结果表明, DMSO的加入破坏了淀粉的有序结构, 实现了淀粉的塑化, 形成均一的非晶连续相. 同甘油及甘油/水增塑体系相比, DMSO与淀粉的羟基形成更为稳定的氢键, 能够有效抑制淀粉的重结晶. 动态力学和拉伸力学性能测试结果表明, 经过DMSO的增塑, 有效降低了淀粉的玻璃化转变温度, 改善了材料的韧性, 增塑效率要好于甘油及甘油/水复合增塑体系.     

CHARACTERIZATION OF POLY(VINYL ALCOHOL)-KONJAC GLUCOMANNAN BLEND FILMS

This article deals with the characterization of blend films obtained by mixing poly(vinyl alcohol) (PVA) and konjac glucomannan (KGM) in aqueous solution. The DTA curves of PVA/KGM blend films showed overlapping of the main thermal transitions characteristic of the individual polymers. The exothermic peak at 312°C, which resulted from the thermal degradation of the KGM, shifted slightly to a higher temperature at low PVA content (≤20 wt%). The weight-retention properties of the blend films indicated that thermal stability of the blend films were better than pure KGM film at PVA content below 20 wt%. The crystallinities, tensile strength, and elongation at break of the films increased with the PVA content, and reached the maximum values at 20 wt% PVA, then decreased. Changes in the carbonyl stretching band of KGM and hydroxyl stretching regions of KGM and PVA were detected by FTIR analysis. Those are attributable to the existence of a certain degree of inteaction between KGM and PVA, and resulted from intermolecular hydrogen bonds. Phase separation phenomena were observed by examining the surface of the blend films by SEM.     

Water resistance, mechanical properties and biodegradability of methylated-cornstarch/poly(vinyl alcohol) blend film

The main shortcomings of biodegradable starch/poly(vinyl alcohol) (PVA) film are hydrophilicity and poor mechanical properties. With an aim to overcome these disadvantages, cornstarch was methylated and blend films were prepared by mixing methylated-cornstarch (MCS) with PVA. The mechanical properties, water resistance and biodegradability of the MCS/PVA film were investigated. It was found that MCS/PVA film had higher water resistance than the native starch/PVA film. However, the water resistance of MCS/PVA films did not have significant difference with the increase in the degree of substitution (DS) of the methylated starch from 0.096 to 0.864. Enzymatic, microbiological and soil burial biodegradation results indicated that the biodegradability of the MCS/PVA film strongly depended on the starch proportion in the film matrix. The degradation rate of starch in the starch/PVA film was hindered by blending starch with PVA. Both tensile strength and percent elongation at break of the MCS/PVA film were improved as DS of the methylated starch increased. Conversely, increasing the methylated starch proportion in film matrix deteriorated both tensile strength and percent elongation at break of the film.     

Influence of urea and glycerol on functional properties of biodegradable PVA/xylan composite films

In recent years, numerous studies have focused on biodegradable plastics for agricultural applications. To improve the mechanical and hydrophobic properties, biodegradable xylan composite films containing poly(vinyl alcohol) (PVA) were successfully prepared by casting method in this work. A series of composite films at a PVA/xylan weight ratio of 3:1 under the addition of glycerol and urea were investigated. Influences of the urea and glycerol amounts on the functional properties of composite films such as hydrophilicity/hydrophobicity, water vapor permeability (WVP), mechanical properties, solubility and degradability were comparatively investigated. Results showed that increasing the glycerol amount led to a decrease in tensile strength and an increase in elongation at break and WVP, while the addition of 1 % urea in composite films without glycerol had a positive impact on improving the water resistance of composite films; the contact angle and WVP values reached 114.68° and 4.11 × 10^?11 g m^?1 s^?1 Pa^?1. Moreover, thermogravimetric analysis, FTIR and a scanning electron microscope were used to confirm the compatibility of the PVA and xylan components. FTIR analysis displayed the intensity of hydroxyl groups of films became stronger with increasing amounts of glycerol, while the opposite results were obtained with an increase of the amount of urea. These indicated that glycerol could improve the miscibility between PVA and xylan, and the addition of urea could enhance the water resistance of composite films.     

Preparation and properties of poly(vinyl alcohol)/exfoliated α-zirconium phosphate nanocomposite films

In this work, poly(vinylalcohol)(PVA)/exfoliated α-zirconium phosphate(e-α-ZrP) nanocomposites of various compositions were created by a solution casting method. The α-ZrP compound was synthesized by refluxing. The characteristic properties of the PVA/e-α-ZrP composite films were examined by thermal gravimetric analysis (TGA), differential scanning calorimetry (DSC), X-ray diffraction (XRD), scanning electron microscopy (SEM) and tensile tests. Tensile tests indicated that with the loading of e-α-ZrP, the tensile strength and the elongation at break were increased by 17.3% and 26.6% compared to neat PVA, respectively. It is noteworthy that optimum film properties were obtained with 0.8 wt% e-α-ZrP, and higher proportions of e-α-ZrP, may be related to the aggregation of e-α-ZrP particles and deterioration of the film properties. On the whole, the nanocomposite PVA/e-α-ZrP systems had mechanical and thermal properties which were superior to that of the neat polymer and its conventionally filled composites.     

Morphology and Mechanical Properties of Palm Based Fly Ash Reinforced Dynamically Vulcanized Natural Rubber/Polypropylene Blends

Palm based fly ash (PFA) is a solid waste of palm oil processing industry which contains silica components. These components are typically used to improve the mechanical properties of rubber-based products. This research aims to study the effect of the PFA as a filler on the morphology and properties of thermoplastic vulcanizate (TPV) based on a mixture of natural rubber (NR) and polypropylene (PP). TPV samples were prepared using the internal mixer at a mass ratio of NR/PP 70/30. Maleated polypropylene (MA-g-PP) 5% mass was added as a compatibilizer, filler content was varied from 15 to 45 per hundred rubber (phr). Paraffin and palm oil were added as a plasticizer with contents of 5 to 50 phr. Other additives include ZnO 5 phr, stearic acid 2 phr, trimethylquinone 1 phr, mercaptodibenzo-thiozyldisulfide 0.6 phr and 3 phr sulfur. The results showed that the use of PFA provides good tensile strength properties, a relatively homogeneous morphology, and low water absorption rate. The use of paraffin plasticizer produces a higher tensile strength compared to palm oil, but the elongation at break which produced the contrary. The best morphology and tensile properties of TPV (NR/PP 70/30) are on PFA and paraffin contents of 30 phr and 25 phr, respectively.     

电纺聚乙烯醇超细纤维膜的性能研究

由电纺制备聚乙烯醇(PVA)超细纤维膜,以扫描电镜观察纤维的微观形貌,用X射线衍射研究超细纤维膜的结晶行为,并测定了PVA超细纤维膜的力学性能和吸水性.结果表明,PVA超细纤维的平均直径为(184±26)nm,超细纤维中PVA的结晶度和晶体有序程度较浇铸膜低.超细纤维膜的拉伸强度、模量和断裂伸长率均较浇铸膜差,吸水率在300%以上,高于浇铸膜.     

海藻酸钠-硫酸软骨素共混膜的结构及性能研究

利用溶液共混法成功制备了新型生物膜材料-硫酸软骨素共混膜,通过红外光谱、X-射线衍射、原子吸收光谱和扫描电镜对共混膜的结构进行了表征,并测定了不同配比共混膜的抗张强度、断裂伸长率,吸水率,同时考察了介质pH值和离子强度对共混膜吸水率的影响。结果表明:共混膜中海藻酸钠、软骨素之间具有较强的相互作用和良好的相容性,共混膜具有良好的力学性能。作为一种潜在的生物材料可望在生物医学领域得到应用。