Interpretation of contact angle measurements on two different fluoropolymers for the determination of solid surface tension

Contact angle measurements with a large number of liquids on the semi-fluorinated acryl polymer EGC-1700 films are reported. The surface tension was determined to be gammasv=13.84 mJ/m2 from contact angles of octamethylcyclotetrasiloxane (OMCTS) and decamethylcyclopentasiloxane (DMCPS). Inertness of these two liquids makes them ideal for determination of surface tension of low-energy fluoropolymers. On the other hand, contact angles of many other liquids deviated somewhat from a smooth contact angle pattern that represents the EGC-1700 surface tension. It is argued that noninertness of the molecules of these liquids gives rise to specific interactions with the polymer film, causing the deviations. Furthermore, contact angles of a series of n-alkanes (n-hexane to n-hexadecane) showed systematic deviations from this curve, similar to the trend observed for n-alkanes/Teflon AF 1600 systems studied earlier. Adsorption of vapor of short-chain liquids onto the polymer film caused their contact angles to fall above the gammasv=13.84 mJ/m2 curve, and a parallel alignment of molecules of the long-chain n-alkanes in the vicinity of the solid was the explanation for the deviation of their contact angles below it. It is found that vapor adsorption effect is more significant in the case of Teflon AF 1600, while the alignment of liquid molecules close to the surface is more pronounced for EGC-1700.     

Contact angle measurements with liquids consisting of bulky molecules

Well-measured contact angles with different solid-liquid systems fall approximately on smooth patterns when plotted versus liquid surface tension. However, there are deviations of 1 degrees -3 degrees , which are outside the error limits. It is the purpose of this paper to elucidate the reasons for such deviations. Two types of liquids were selected for advancing contact angle measurements on Teflon AF 1600 coated surfaces: a series of n-alkanes ranging from n-hexane to n-hexadecane and five liquids consisting of bulky molecules, octamethylcyclotetrasiloxane (OMCTS), methyl salicylate, tetralin, cis-decalin, and octamethyltrisiloxane (OMTS). It was found that contact angles of the liquids with bulky molecules fall on a perfectly smooth curve corresponding to a solid surface tension of 13.64 +/- 0.1 mJ/m2. However, contact angles of n-alkanes deviated from this curve by up to 3 degrees in a complicated fashion. The observed trend suggests that more than one mechanism is responsible for the deviations. Substrate-induced rearrangement of liquid molecules in the close vicinity of the surface in the case of long-chain n-alkanes and adsorption of vapor onto the solid surface in the case of short-chain n-alkanes are the most likely explanations. The results suggest that liquids with bulky molecules appear to be suitable for contact angle measurements to characterize energetics of polymeric surfaces.     

Determination of accurate surface tensions of maleimide copolymers containing fluorinated side chain from contact angle measurements

Surface energetics of two fluorinated maleimide copolymers containing fluorinated side chain, i.e., poly(ethene-alt-N-(4-(perfluoroheptylcarbonyl)aminobutyl)maleimide) (ETMF) and poly(octadecene-alt-N-(4-(perfluoroheptylcarbonyl)aminobutyl)maleimide) (ODMF), are studied by contact angle measurements with 10 liquids consisting of fairly bulky molecules. Because of the inertness of octamethylcyclotetrasiloxane (OMCTS) and decamethylcyclopentasiloxane (DMCPS) molecules, their contact angles are used to determine the surface tension of the two polymers. It is found that other liquids show specific interactions with the ETMF films, and their contact angles deviate from a smooth curve that represents the surface tension of ETMF, i.e., 11.00 mJ/m². On ODMF surfaces, only OMCTS and DMCPS yield useful contact angles. Other liquids either dissolve the polymer film or show a slip-stick pattern. This finding is discussed in terms of interactions between segments of the polymer chains and the test liquids. OMCTS and DMCPS are suggested as the appropriate probe liquids, meeting specific criteria necessary for the determination of accurate surface tension of fluoropolymers.     

Effect of electric field on liquid infiltration into hydrophobic nanopores

Understanding the variation of nanofluidic behavior in the presence of an external electric field is critical for controlling and designing nanofluidic devices. By studying the critical infiltration pressure of liquids into hydrophobic nanopores using molecular dynamics (MD) simulations and experiments, important insights can be gained on the variation of the effective liquid-solid interfacial tension with the magnitude and sign of electric field, as well as its coupling with the pore size and the solid and liquid species. It is found that the effective hydrophobicity reduces with the increase of electric intensity and/or pore size, and the behavior is asymmetric with respect to the direction of the electric field. The underlying molecular mechanisms are revealed via the study of the density profile, contact angle, and surface tension of confined liquid molecules.     

Recent progress in the determination of solid surface tensions from contact angles

Advancing contact angles of different liquids measured on the same solid surface fall very close to a smooth curve when plotted as a function of liquid surface tension, i.e., gamma(lv)costheta versus gamma(lv). Changing the solid surface, and hence gamma(sv), shifts the curve in a regular manner. These patterns suggest that gamma(lv)costheta depends only on gamma(lv) and gamma(sv). Thus, an "equation of state for the interfacial tensions" was developed to facilitate the determination of solid surface tensions from contact angles in conjunction with Young's equation. However, a close examination of the smooth curves showed that contact angles typically show a scatter of 1-3 degrees around the curves. The existence of the deviations introduces an element of uncertainty in the determination of solid surface tensions. Establishing that (i) contact angles are exclusively a material property of the coating polymer and do not depend on experimental procedures and that (ii) contact angle measurements with a sophisticated methodology, axisymmetric drop shape analysis (ADSA), are highly reproducible guarantees that the deviations are not experimental errors and must have physical causes. The contact angles of a large number of liquids on the films of four different fluoropolymers were studied to identify the causes of the deviations. Specific molecular interactions at solid-vapor and/or solid-liquid interfaces account for the minor contact angle deviations. Such interactions take place in different ways. Adsorption of vapor of the test liquid onto the solid surface is apparently the only process that influences the solid-vapor interfacial tension (gamma(sv)). The molecular interactions taking place at the solid-liquid interface are more diverse and complicated. Parallel alignment of liquid molecules at the solid surface, reorganization of liquid molecules at the solid-liquid interface, change in the configuration of polymer chains due to contact with certain probe liquids, and intermolecular interactions between solid and liquid molecules cause the solid-liquid interfacial (gamma(sl)) tension to be different from that predicted by the equation of state, i.e., gamma(sl) is not a precise function of gamma(lv) and gamma(sv). In other words, the experimental contact angles deviate from the "ideal" contact angle pattern. Specific criteria are proposed to identify probe liquids which eliminate specific molecular interactions. Octamethylcyclotetrasiloxane (OMCTS) and decamethylcyclopentasiloxane (DMCPS) are shown to meet those criteria, and therefore are the most suitable liquids to characterize surface tensions of low energy fluoropolymer films with an accuracy of +/-0.2 mJ/m2.     

Low‐rate dynamic contact angles on poly(methyl methacrylate/ethyl methacrylate, 30/70) and the determination of solid surface tensions

Low‐rate dynamic contact angles of 12 liquids on a poly(methyl methacrylate/ethyl methacrylate, 30/70) P(MMA/EMA, 30/70) copolymer were measured by an automated axisymmetric drop shape analysis‐profile (ADSA‐P). It was found that five liquids yield nonconstant contact angles, and/or dissolve the polymer on contact. From the experimental contact angles of the remaining seven liquids, it is found that the liquid–vapor surface tension times cosine of the contact angle changes smoothly with the liquid–vapor surface tension (i.e., γ_l|Kv cos θ depends only on γ_l|Kv for a given solid surface or solid surface tension). This contact angle pattern is in harmony with those from other methacrylate polymer surfaces previously studied.^45,50 The solid–vapor surface tension calculated from the equation‐of‐state approach for solid–liquid interfacial tensions¹⁴ is found to be 35.1 mJ/m², with a 95% confidence limit of ± 0.3 mJ/m², from the experimental contact angles of the seven liquids. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2039–2051, 1999     

Wetting study of imidazolium ionic liquids

In this work, we present a systematic contact angles study of a series of 1-alkyl, 3-methyl-imidazolium ionic liquids (ILs) on well-defined polar and nonpolar monolayer surfaces supported on Si wafers. The advancing and receding contact angles of ILs were used to determine the surface energy of the monolayer surfaces using Neumann's equation-of-state and Zisman's critical surface tension approaches. In parallel, the contact angles of conventional probe fluids (molecular liquids) including water, formamide, methylene iodide, ethylene glycol, and hexadecane were determined on the same surfaces. The results obtained showed a great deal of similarity in wetting behavior of ionic vs molecular probe fluids: the contact angles of both sets of liquids followed the same patterns in accord with the surface tension of the fluid. A good agreement was found between the surface energy determined by different sets of liquids.     

Low-rate dynamic contact angles on poly(n-butyl methacrylate) and the determination of solid surface tensions

 Low-rate dynamic contact angles of 22 liquids on a poly(n-butyl methacrylate) (PnBMA) polymer are measured by an automated axisymmetric drop shape analysis-profile (ADSA-P). It is found that 16 liquids yielded non-constant contact angles, and/or dissolved the polymer on contact. From the experimental contact angles of the remaining 6 liquids, it is found that the liquid–vapor surface tension times cosine of the contact angle changes smoothly with the liquid–vapor surface tension, i.e. γ_lv cos θ depends only on γ_lv for a given solid surface (or solid surface tension). This contact angle pattern is in harmony with those from other inert and non-inert (polar and non-polar) surfaces [34–37, 45–47]. The solid–vapor surface tension calculated from the equation-of-state approach for solid-liquid interfacial tensions [14] is found to be 28.8 mJ/m², with a 95% confidence limit of ±0.5 mJ/m², from the experimental contact angles of the 6 liquids. Received: 12 September 1997 Accepted: 22 January 1998     

Interface between ionic and nonionic liquids: theoretical study

We use a Flory-Huggins type approach to calculate the structure and the surface tension coefficient of the boundary between ionic and nonionic liquids. The mixture of ionic and nonionic liquids is treated as a "three-component" system including anions, cations, and neutral molecules. We show that if the affinities of the cations and the anions to the neutral molecules are different, the interface comprises an electric double layer. The presence of this layer (uncompensated electric field) stabilizes the interface: the field inhibits the ions segregation at the interface and increases the surface tension. On the other hand, the short-range volume interactions promote the segregation and decrease the surface tension. Furthermore, the surface tension coefficient can be negative, if the difference of the affinities is high enough. It implies a possibility of microphase separation of the system.     

Determination of line tension for systems near wetting

Contact angle measurements for three n-alkanes, heptane, octane, and nonane, on two different self-assembled surfaces (SAM) are reported as a function of drop size. These liquids all formed low contact angles (below 20 degrees ); the measurements were performed using an accurate method for systems with low contact angle, ADSA-D. The observed drop size dependence of the contact angles was interpreted using the modified Young equation. It was concluded that the observed drop size dependence of contact angles was due to line tension. The choice of systems also provided the opportunity to examine the behavior of the line tension for systems near wetting (i.e., low contact angles). It was determined that the line tension is positive and ranges from below 10(-7) to just below 10(-6) J/m for the systems studied; the observations suggested that the line tension decreases as the contact angle decreases and likely vanishes at complete wetting.     

Equilibrium contact angles of liquid droplets on ideal rough solids

This work proposes a theoretical model for predicting the apparent equilibrium contact angle of a liquid on an ideal rough surface that is homogeneous and has a negligible body force, line tension, or contact angle hysteresis between solid and liquid. The model is derived from the conservation equations and the free-energy minimization theory for the changes of state of liquid droplets. The work of adhesion is expressed as the contact angles in the wetting process of the liquid droplets. Equilibrium contact angles of liquid droplets for rough surfaces are expressed as functions of the area ratios for the solid, liquid, and surrounding gas and the roughness ratio and wetting ratio of the liquid on the solid for the partially and fully wet states. It is found that the ideal critical angle for accentuating the contact angles by the surface roughness is 48°. The present model is compared with existing experimental data and the classical Wenzel and Cassie-Baxter models and agrees with most of the experimental data for various surfaces and liquids better than does the Wenzel model and accounts for trends that the Wenzel model cannot explain.     

Influence of electronic properties of naphthalene compounds on contact angles

Contact angles of a homologous series of naphthalene compounds on films of a fluorinated acrylate polymer (EGC-1700) deviate from an ideal pattern of contact angles. The deviations increase with the electronegativity of the constituent atoms of the liquid molecules. The results suggest that an uneven distribution of electrostatic charges over the molecules creates strong dipole moments, giving rise to fairly strong dipole-dipole and dipole-induced dipole interactions between liquid molecules and the EGC-1700 chains, which have large dipole moments. In comparison, contact angles of the same probe liquids on the films of Teflon AF 1600, which have small dipole moments, fall on a smooth curve representing the surface tension of the polymer film.     

Validity of the "sharp-kink approximation" for water and other fluids

The contact angle of a liquid droplet on a solid surface is a direct measure of fundamental atomic-scale forces acting between liquid molecules and the solid surface. In this work, the validity is assessed of a simple equation, which approximately relates the contact angle of a liquid on a surface to its density, its surface tension, and the effective molecule-surface potential. This equation is derived in the sharp-kink approximation, where the density profile of the liquid is assumed to drop precipitously within one molecular diameter of the substrate. It is found that this equation satisfactorily reproduces the temperature-dependence of the contact angle for helium on alkali metal surfaces. The equation also seems be applicable to liquids such as water on solid surfaces such as gold and graphite, on the basis of a comparison of predicted and measured contact angles near room-temperature. Nevertheless, we conclude that, to fully test the equation's applicability to fluids such as water, it remains necessary to measure the contact angle's temperature-dependence. We hypothesize that the effects of electrostatic forces can increase with temperature, potentially driving the wetting temperature much higher and closer to the critical point, or lower, closer to room temperature, than predicted using current theories.     

端羟基化聚苯乙烯的表面性质

利用Wilhelmy片技术和躺滴法研究了端羟基化聚苯乙烯的表面性质.结果表明,端羟基化对聚苯乙烯在空气面的接触角基本没有影响(89°),而在玻璃面的接触角则大大降低(66°),其降低幅度与分子量及分子量分布有关.这与动态接触角的测定结果基本一致,而且宽分子量分布的端羟基化聚苯乙烯的前进接触角(θa)随着温度的升高而降低,于40℃时达到最低值.而窄分子量分布样品的动态接触角基本不变.样品与不同温度水接触后表面接触角的变化也基本相似.DMA研究结果表明,样品损耗模量、储能模量和tanδ从40℃开始发生突变,刚好与接触角最低值的温度相对应.这是由于宽分子量分布样品中的较低分子量组分在表面聚集,导致表面分子具有较高的活动能力.接触角随温度的变化趋势可能是聚合物表面分子运动能力增加和结晶程度变化等因素综合作用的结果.     

Electrokinetic Separation Methods

Electrophoresis is the transport of dissolved molecules or suspended particles in a homogeneous polar liquid (such as water) under the influence of an electric field. Most molecules or particles acquire a surface electric charge when dissolved or suspended in buffered water (or other polar liquids), owing to ionization or adsorption of ions present in the water. The sign of the surface charge of molecules or particles determines whether they will migrate towards the positive or the negative electrode of the applied electric field, and the velocity of migration depends on the surface potential of the molecules or particles, as well as on the potential of the electric field.     

Experimental Study on Contact Angle Patterns: Liquid Surface Tensions Less Than Solid Surface Tensions

The interpretation of contact angles in terms of solid surface tensions is not trivial. In the past, we and others have postulated that contact angles should be measured with liquid of surface tension larger than the anticipated solid surface tension, i.e., gamma(lv)>gamma(sv). This has recently been disputed. It is also not entirely obvious how to proceed experimentally since gamma(sv) is not known initially. Typically, one starts with a liquid of high gamma(lv) (such as water) and goes lower. We have stopped in the past when the contact angles became small. A question arises as to what would happen if we would go on. Contact angles of liquids with gamma(lv) less than or near gamma(sv) were measured on eight polymer-coated solid surfaces. The experimental contact angle patterns for gamma(lv)gamma(sv) were compared. Results suggest that contact angle interpretation in terms of solid surface tensions requires contact angles to be measured for gamma(lv)>gamma(sv) because the Young equation is not applicable for gamma(lv)相似文献   

Effect of surfactants on wetting of super-hydrophobic surfaces

The effect of surfactants on wetting behavior of super-hydrophobic surfaces was investigated. Super-hydrophobic surfaces were prepared of alkylketene dimer (AKD) by casting the AKD melt in a specially designed mold. Time-dependent studies were carried out, using the axisymmetric drop shape analysis method for contact angle measurement of pure water on AKD surfaces. The results show that both advancing and receding contact angles of water on the AKD surfaces increase over time ( approximately 3 days) and reach the values of about 164 and 147 degrees , respectively. The increase of contact angles is due to the development of a prickly structure on the surface (verified by scanning electron microscopy), which is responsible for its super-hydrophobicity. Aqueous solutions of sodium acetate, sodium dodecyl sulfate, hexadecyltrimethylammonium bromide, and n-decanoyl-n-methylglucamine were used to investigate the wetting of AKD surfaces. Advancing and receding contact angles for various concentrations of different surfactant solutions were measured. The contact angle results were compared to those of a number of pure liquids with surface tensions similar to those of surfactant solutions. It was found that although the surface tensions of pure liquids and surfactant solutions at high concentrations are similar, the contact angles are very different. Furthermore, the usual behavior of super-hydrophobic surfaces that turn super-hydrophilic when the intrinsic contact angle of liquid on a smooth surface (of identical material) is below 90 degrees was not observed in the presence of surfactants. The difference in the results for pure liquids and surfactant solutions is explained using an adsorption hypothesis.     

Photon control of liquid motion on reversibly photoresponsive surfaces

The movement of a liquid droplet on a flat surface functionalized with a photochromic azobenzene may be driven by the irradiation of spatially distinct areas of the drop with different UV and visible light fluxes to create a gradient in the surface tension. In order to better understand and control this phenomenon, we have measured the wetting characteristics of these surfaces for a variety of liquids after UV and visible light irradiation. The results are used to approximate the components of the azobenzene surface energy under UV and visible light using the van Oss-Chaudhury-Good equation. These components, in combination with liquid parameters, allow one to estimate the strength of the surface interaction as given by the advancing contact angle for various liquids. The azobenzene monolayers were formed on smooth air-oxidized Si surfaces through 3-aminopropylmethyldiethoxysilane linkages. The experimental advancing and receding contact angles were determined following azobenzene photoisomerization under visible and ultraviolet (UV) light. Reversible light-induced advancing contact-angle changes ranging from 8 to 16 degrees were observed. A large reversible change in contact angle by photoswitching of 12.4 degrees was achieved for water. The millimeter-scale transport of 5 microL droplets of certain liquids was achieved by creating a spatial gradient in visible/UV light across the droplets. A criterion for light-induced motion of droplets is shown to be consistent with the response of a variety of liquids. The type of light-driven fluid movement observed could have applications in microfluidic devices.     

Capillary rise of liquids over a microstructured solid surface

The location of the triple line as a function of time has been recorded for a series of organic liquids, with various surface tension to viscosity ratios, wicking upward a rough Cu(6)Sn(5)/Cu intermetallic (IMC) substrate. The complex topographical features of such an IMC rough surface are characterized by surface porosity and surface roughness. A theoretical model for wicking upward a rough surface has been established by treating the rough IMC surface as a two-dimensional porous medium featuring a network of open microtriangular grooves. The model is verified against experimental data. The study confirms that the kinetics of capillary rise of organic liquids in a nonreactive flow regime over a porous surface having arbitrary but uniformly distributed topographical features involves (i) surface topography metrics (i.e., permeability, tortuosity/porosity, and geometry of the microchannel cross section); (ii) wicking features (i.e., contact angle and filling factor); and (iii) physical properties of liquids (i.e., surface tension and viscosity). An excellent agreement between theoretical predictions and experimentally obtained data proves, for a selected filling factor η, validity of the analytically established model. Scaled data sets show that, for a given rough surface topography, (i) wicking kinetics of considered liquids depend on properties of liquids, that is, surface tension to viscosity ratios and contact angles; (ii) the filling factor for all tested liquids is an invariant, offering good prediction within the range of ~0.9-1.0. The distance of the wicking front versus square root of time relationship was well established throughout the whole considered wicking evolution time.     

Microscopic measurements of deformation of liquid surfaces induced by localized direct current electric field.

This study presents a new microscopic method for the measurements of the deformation of liquid surfaces induced by a localized direct current (dc) electric field in a noncontact manner. Since the dielectric constant of aqueous and organic liquids is larger than that of air, the liquids tend to occupy a space with a stronger electric field. The horizontal level of transparent surfaces was measured with a constructed microscopic system that possessed a resolution of about 2 microm. When a rod electrode (2.0 mm in radius) was brought near to a liquid surface vertically within 150 - 200 microm and a dc voltage (50 - 75 V) was applied, the surface just under the electrode rose by 4 - 19 microm. The deformation of the liquid surfaces was quantitatively analyzed by using a dielectric force, surface tension, and hydrostatic pressure.