低压近场静电纺丝ZnO/PVDF复合微米纤维阵列的制备及压力传感性

利用低压近场静电纺丝技术制备了ZnO/PVDF(聚二偏氟乙烯)微米纤维平行阵列, 通过光学显微镜、扫描电子显微镜(SEM)和X射线能量色散光谱(EDS)对ZnO/PVDF微米纤维进行了表征. 该复合纤维的平均直径约为40 μm. EDS分析测试证明ZnO纳米颗粒已经掺杂进入了平行微米纤维中. 压电性能和电学性能测试结果表明, ZnO/PVDF微米纤维阵列的压电性能增强. 研究结果表明, 近场电纺丝ZnO/PVDF复合微米纤维阵列在压电型压力传感器和纳米发电机领域具有潜在的应用价值.     

Improving piezoelectric and pyroelectric properties of electrospun PVDF nanofibers using nanofillers for energy harvesting application

In this study, it was aimed to increase the piezoelectric and pyroelectric properties of electrospun polyvinylidene fluoride (PVDF) nanofibers simultaneously by using specific nanofillers. Graphene oxide (GO), graphene, and halloysite nanotubes with different concentrations (0, 0.05, 0.4, and 1.6% wt/wt) were combined with PVDF solution and were fabricated in the form of nanofibers through electrospinning. Pyroelectric properties of samples were measured by submerging sealed samples in hot water (360°K) and ice (270°K). The piezoelectric properties of the samples were evaluated through bending tests. The microstructural, mechanical, and thermal properties of the electrospun PVDF nanocomposite were investigated using scanning electron microscope, Instron instrument, and thermogravimetric analysis, respectively. To further support the experimental observations for generating electric voltage in the bended nanogenerator, the PVDF nanogenerator (PNG) was also modeled by a finite element analysis based on the theory of linear piezoelectricity using COMSOL Multiphysics simulation software. Experimental results showed that adding nanofillers could improve the piezoelectric and pyroelectric properties of all samples, associated with the increment of β‐phase in the nanofibers. It was concluded that adding nanofillers could increase pyroelectricity about 50% more than piezoelectricity in pristine PVDF nanofiber web. The PNG containing 1.6 wt% GO showed the highest efficiency in terms of piezoelectricity and pyroelectricity. In addition, the results showed that the ratio of piezoelectric to pyroelectric coefficients was constant (~1.5) and it was independent of the nanofiller type and content. The effect of external force and vibration frequency on the output voltage was also investigated. Increasing the compressive force and vibration frequency caused a greater output voltage. Finally, the fabricated nanogenerator was integrated on insole and elbow to investigate its energy harvesting capabilities from body movement.     

P[MMA-IL]修饰石墨烯协同调控PVDF复合物结晶与介电行为

为改善石墨烯(Gra)在聚偏氟乙烯(PVDF)中的分散性和界面性质,以甲基丙烯酸甲酯(MMA)和1-乙烯基-3-乙基咪唑溴盐(IL)为单体合成P[MMA-IL]共聚物,用于修饰石墨烯(Gra),并通过溶液共混、热压法制备PVDF/PMMA、PVDF/P[MMA-IL]、PVDF/PMMA/Gra和PVDF/P[MMA-IL]/Gra复合薄膜.采用Raman光谱、场发射扫描电子显微镜(FESEM)、傅里叶变换反射红外光谱分析仪(FTIR-ATR)、X射线衍射仪(XRD)、偏光显微镜(POM)、示差扫描量热仪(DSC)和电感电容电阻测试仪(LCR)对复合薄膜的结构形态、结晶与介电行为进行表征和分析.Raman光谱表明P[MMA-IL]与Gra之间存在强相互作用;FESEM照片显示P[MMAIL]能够促进Gra在基体中的分散;DSC、XRD和FTIR-ATR数据表明PMMA降低PVDF的结晶温度,PMMA和Gra未能诱导出?-PVDF极性晶体,而单独的P[MMA-IL]会通过咪唑阳离子-偶极子作用诱导?-PVDF晶体;通过咪唑阳离子-π强相互作用,P[MMA-IL]在模板剂Gra表面进行修饰,协同诱导作用增强.POM照片表明?-PVDF晶体在生长过程中,MMA链段会嵌入到球晶的晶片空隙中,引起结构疏松;离子-偶极子和IL成核作用导致?-PVDF晶体尺寸较小,结晶较快.介电行为研究表明PMMA及其修饰Gra降低PVDF的结晶度和链浓度,导致界面极化和取向极化较弱,介电响应较弱;而P[MMA-IL]修饰Gra诱导的?-PVDF晶体、以及IL链段在界面的离子极化使得界面极化作用增强,介电响应增强.     

Electrospinning of poly(vinylidene fluoride)/dimethylformamide solutions with carbon nanotubes

For conductive carbon nanotube (CN)/polymer composite fibers to be obtained, CNs were incorporated into poly(vinylidene fluoride) (PVDF) in dimethylformamide (DMF) solutions and electrospun to form CN/PVDF fiber mats. The thinnest fiber was 70 nm thick. The percolation threshold for the insulator‐to‐conductor transition was 0.003 wt % CN for CN/PVDF/DMF solutions, 0.015 wt % CN for CN/PVDF spin‐coated films, and 0.04 wt % CN for CN/PVDF electrospun fiber mats. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1572–1577, 2003     

Preparation and characterization of a novel electrospun spider silk fibroin/poly(D,L-lactide) composite fiber

In the paper, we successfully prepared spider silk fibroins (Ss)/poly( d, l-lactide) (PDLLA) composite fibrous nonwoven mats for the first time to the best of our knowledge. The morphology of the fibers was observed by a scanning electron microscope (SEM) and transmission electron microscope (TEM). The secondary structure change of the spidroin before and after electrospinning was characterized using Fourier transform infrared spectroscopy (FT-IR). Herein, a qualitative analysis of the conformational changes of the silk protein was performed by analyzing the FT-IR second-derivative spectra, from which quantitative information was obtained via the deconvolution of the amide I band. A mechanical test was carried out to investigate the tensile strength and the elongation at break. A water contact angle (CA) measurement was also performed to characterize surface properties of the fibers. The cytotoxicity of electrospun PDLLA and Ss-PDLLA nonwoven fibrous mats was evaluated based on a CCL 81(Vero) cells proliferation study. The results showed that the hydrophilic and mechanical property of the composite fiber were improved by introducing spidroin.     

Effect of Additional Poly Vinyledene Fluoride (PVDF) on LiCoO2 Cathodes

LiCoO2 as one of cathodes in lithium ion battery was prepared using ball mill on 800 Hz for 10 h, followed by ultra–sonic process in order to form LiCoO2 nanoparticle. Poly(vinyledene fluoride) PVDF was added into LiCoO2 nanoparticle using dimethylsulfoxide (DMSO) to form LiCoO2/PVDF composite. The addition of PVDF was able to fill the voids on LiCoO2 matrix, therefore the space gap between particles in the matrix could be eliminated. The morphology, crystal structure and composite conductivity of LiCoO2/PVDF were analysed using scanning electron microscope (SEM), X-ray diffraction (XRD) and conductivity meter. The results showed that LiCoO2 with PVDF had bigger conductivity value than LiCoO2 without PVDF.     

Preparation and antibacterial activity of electrospun chitosan/poly(ethylene oxide) membranes containing silver nanoparticles

Fairly uniform chitosan (CS)/poly(ethylene oxide) (PEO) ultrafine fibers containing silver nanoparticles (AgNPs) were successfully prepared by electrospinning of CS/PEO solutions containing Ag/CS colloids by means of in situ chemical reduction of Ag ions. The presence of AgNPs in the electrospun ultrafine fibers was confirmed by X-ray diffraction patterns. The AgNPs were evenly distributed in CS/PEO ultrafine fibers with the size less than 5 nm observed under a transmission electron microscope. X-ray photoelectron spectroscopy suggested that the existence of Ag―O bond in the composite ultrafine fibers led to the tight combination between Ag and CS. Evaluation of antimicrobial activities of the electrospun Ag/CS/PEO fibrous membranes against Escherichia coli showed that the AgNPs in the ultrafine fibers significantly enhanced the inactivation of bacteria.     

Effect of Supercritical Carbon Dioxide Conditions on PVDF/PVP Microcellular Foams

Supercritical carbon dioxide (ScCO₂) was used as a physical foaming agent to prepare poly(vinylidene f luoride)/poly(N-vinyl pyrrolidone) (PVDF/PVP) microstructure material. The effects of foaming conditions including saturation pressure, foaming temperature and foaming time on PVDF/PVP foams morphology, thermal and electrical behavior were systematically investigated by scanning electron microscope, differential scanning calorimeter and broadband dielectric spectrometer. Small cell and low cell density were achieved at low pressure of 12 MPa, as increasing saturation pressure, the average cell size increased first, and then decreased. The competition between the cell growth and cell nucleation played an important role in average cell size, which was directly related to ScCO₂ processing conditions. With increasing foaming temperature, cell size was increased and cell density was decreased, in a nearly linear manner. The variation of foaming time was considered to be closely related to the time for cells to grow. Thus, the results revealed that the average cell size enhanced with extending foaming time. The thermal properties of PVDF/PVP composites are slightly inf luenced by foaming parameters, and the dielectric constant of PVDF/PVP composite foams decreased with increasing volume expansion ratio.     

EFFECT OF GAS FLOW RATE ON CRYSTAL STRUCTURES OF ELECTROSPUN AND GAS-JET/ELECTROSPUN POLY(VINYLIDENE FLUORIDE) FIBERS

The effect of gas flow rate on crystal structures of electrospun and gas-jet/electrospun poly(vinylidene fluoride) (PVDF) fibers was investigated.PVDF fibers were prepared by electrospinning and gas-jet/electrospinning of its N,N-dimethylformamide (DMF) solutions.The morphology of the PVDF fibers was investigated by scanning electron microscopy (SEM).With an increase of the gas flow rate,the average diameters of PVDF fibers were decreased.The crystal structures and thermal properties of the PVDF fibers w...     

SEPARATION OF PROPANE FROM PROPANE/NITROGEN MIXTURES USING PDMS COMPOSITE MEMBRANES BY VAPOR PERMEATION

This study deals with polydimethylsiloxane(PDMS)/polyvinylidene fluoride(PVDF) composite membranes for propane separation from propane/nitrogen mixtures,which is relevant to the recovery of propane in petroleum and chemical industry.The surface and cross-section morphology of PDMS/PVDF composite membranes was observed by scanning electron microscope(SEM).The surface morphology of PDMS/PVDF composite membranes is very dense.There are three layers,the thin dense top layer,finger-like porous middle layer an...     

PTC/NTC Behavior of PVDF Composites Filled with GF and CF

Conductive polyvinylidene fluoride（PVDF）matrix composites filled with graphited fiber（GF）or carbon fiber（CF）were prepared by the melt-mixing method.The breakage and length distribution of the fibers in the polymer matrix were studied by scanning electron microscope（SEM）and optical microscope（OM）observations,respectively. The differences in the positive temperature coefficient（PTC）effects of the composites were mainly attributed to inter-fiber contact ability.The elimination of the negative temperature coefficient（NTC）effect for CF/PVDF composite was because of an increase in the viscosity of the polymer matrix.With the same filler content,CF could be more effective,to eliminate the NTC effect when compared with GF.Addition of 2%CF（mass fraction）in the PVDF composite with 7%GF（mass fraction）could effectively eliminate the NTC phenomenon of the composite.     

Preparation and Characterization of Aligned PLLA/PCL/HA Composite Fibrous Membranes

Aligned poly(L-lactide) (PLLA)/poly(?-caprolactone) (PCL)/hydroxyapaite (HA) composite fibrous membranes were fabricated by electrospinning. Their morphology, thermal stability, mechanical properties, hydrophilic properties and biocompatibility were investigated. The electrospun fibers are highly aligned and the HA are oriented along the fiber axis. When HA are incorporated, the PLLA/PCL/HA composite fibers become thinner due to the increased conductivity. In addition, the aligned HA reinforce the electrospun fibrous membranes. The larger porosity and higher hydrophilic properties induced by HA in the electrospun fibers have improved the degradation of the PLLA/PCL/HA fibrous membranes which have no toxic effect on proliferation of adipose-derived stem cells.     

聚乙二醇-b-聚乳酸的合成及其电纺形成超细纤维研究

为了提高聚乳酸的亲水性,以辛酸亚锡为催化剂、聚乙二醇单甲醚(mPEG)为大分子引发剂进行丙交酯(LLA)开环聚合,合成聚乙二醇-b-聚乳酸两嵌段共聚物(PELA).以红外光谱1、H核磁共振谱、接触角测试、差热扫描量热分析等方法对PELA的结构及性能进行表征.结果表明,通过调控mPEG与LLA的投料比可以控制PELA的相对分子质量,而随着mPEG组分含量或链长增加,共聚物亲水性增强,但其Tg、Tcc、Tm有所降低.由普通电纺制备PELA超细纤维,并分别由乳液电纺和同轴电纺得到以水溶性聚氧化乙烯(PEO)为芯、PELA为壳的芯/壳结构复合超细纤维(E-PEO/PELA和C-PEO/PELA).扫描电镜和透射电镜结果表明,PELA、E-PEO/PELA和C-PEO/PELA超细纤维形貌良好.随着PELA中mPEG含量的增加,电纺PELA纤维膜的吸水率增强,而由乳液电纺和同轴电纺制备的PEO/PELA芯/壳结构超细纤维膜,亲水性均好于PELA超细纤维膜.     

A novel sandwiched membrane as polymer electrolyte for application in lithium-ion battery

A novel kind of sandwiched polymer membrane was prepared, which consists of two outer layers of electrospun poly(vinyl difluoride) (PVDF) fibrous films and one inner layer of poly(methyl methacrylate) (PMMA) film. Its characteristics were investigated by scanning electron microscopy and X-ray diffraction. The membrane can easily absorb non-aqueous electrolyte to form gelled polymer electrolytes (GPEs). The resulting gelled polymer electrolytes had a high ionic conductivity up to 1.93 × 10⁻³ S cm⁻¹ at room temperature, and exhibited a high electrochemical stability potential of 4.5 V (vs. Li/Li⁺). It is of great potential application in polymer lithium-ion batteries.     

十六烷基膦酸表面修饰纳米镍粉及其复合材料的制备和性能

以十六烷基膦酸作为修饰剂, 对纳米镍粉进行表面改性处理, 通过溶液共混的方法制备改性镍粉与聚丙烯的聚合物基复合材料. 利用X射线光电子能谱(XPS)、 X射线衍射(XRD)及透射电子显微镜(TEM)等测试手段研究改性镍粉的表面形态; 利用扫描电子显微镜(SEM)研究复合材料断面形貌; 利用介电频谱分析系统对复合材料的介电常数和介电损耗等进行了测试. 结果表明, 纳米镍粉表面形成厚度为2~4 nm的十六烷基膦酸包覆层, 使纳米镍粉由亲水性变为亲油性; 聚丙烯基复合材料中, 改性镍粉均匀分散; 复合材料的介电常数在镍填充量为40%时, 可以达到纯聚丙烯的近10倍.     

电纺聚乙烯醇超细纤维膜的性能研究

由电纺制备聚乙烯醇(PVA)超细纤维膜,以扫描电镜观察纤维的微观形貌,用X射线衍射研究超细纤维膜的结晶行为,并测定了PVA超细纤维膜的力学性能和吸水性.结果表明,PVA超细纤维的平均直径为(184±26)nm,超细纤维中PVA的结晶度和晶体有序程度较浇铸膜低.超细纤维膜的拉伸强度、模量和断裂伸长率均较浇铸膜差,吸水率在300%以上,高于浇铸膜.     

Vesicle-formation of hexadecyl phosphatidyl choline released from ε-caprolactone electrospun fibrous mats: preparation and characterization

After it was proved by transmission electron microscope and light microscope that hexadecyl phosphatidyl choline (HePC) itself and HePC/cholesterol (Chol) complexes could form micro- or nanoscale vesicles, it was also found that vesicles composed by HePC itself or HePC/Chol could be formed by releasing from the fibers after electrospun poly ε-caprolactone (PCL) fibers with hexadecyl phosphatidyl choline (HePC) and Chol entrapped was obtained. Characterization by field emission scanning electron microscope, wide-angle X-ray diffraction, and differential thermal analysis indicated that HePC and HePC/Chol was perfectly entrapped in fibers. Beside these, it is was also found that HePC and Chol presented synchronous sustained release pattern from PCL by high-performance liquid chromatography. This experiment provided a further vision of composite materials composed of macromolecule and small molecule, for application in gene delivery, controlled drug delivery and bio-scaffold.     

Synthesis,Morphological Structures,and Material Characterization of Electrospun PLA:PCL/Magnetic Nanoparticle Composites for Drug Delivery

The effects of pure and impure magnetic nanoparticles (MPs) with three different concentrations (0.01, 0.1, and 1 wt %/v) on the morphological structure, crystallinity level, thermal properties and constituent interactions of electrospun poly(lactic acid) (PLA): poly(ε‐caprolactone) (PCL)‐based composites were investigated by means of scanning electron microscopy (SEM), transmission electron microscopy (TEM), X‐ray diffraction (XRD), differential scanning calorimetry (DSC), gel permeation chromatography (GPC), Fourier transform infrared spectroscopy (FTIR), and drug release tests using UV–vis spectrophotometry. Tetracycline hydrochloride (TCH), as a typical therapeutic compound, was loaded into these composite fibrous structures to study their application for drug delivery. The infrared spectra of composite nanofibers confirm the successful embedding of MPs into the fibrous networks. The addition of pure MPs increased the solution viscosity and thus promoted the MP dispersion inside the electrospun composite fiber mats. Impure MPs led to considerably lower average fiber diameters, and could generate unique cell structures that were reported for the first time in this study. The accelerated release of TCH was found by adding pure MPs to PLA:PCL blends. This characteristic was reflected in the parameters of Ritger‐Peppas and Zeng models, which were well fitted to our experimental drug release data. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1607–1617     

Physical and dielectric properties of poly(vinylidene fluoride)/polybenzimidazole functionalized graphene nanocomposites

Polymer‐based nanocomposites with good dielectric behavior have engrossed research devotion because of their distinctive benefits in electronic applications. An in situ synthetic process for the polybenzimidazole functionalized graphene oxide (GBI) and its nanocomposite with poly(vinylidene fluoride) (PVDF) is described. GBI shows good dispersion in the bulk PVDF matrix implying a strong interaction of polybenzimidazole with PVDF as evident from morphological and FTIR studies. A gradual increment of GBI in PVDF increases its piezoelectric β‐polymorph formation with a maximum of 73% for 10 wt % GBI in PVDF (GBF10) which also exhibits highest thermal stability. An exhaustive study of frequency dependent electrical properties of GBF10 indicates significantly higher dielectric constant (61), low dielectric loss (0.42), and low AC conductivity value of 1.17 × 10^?10 S/cm at 100 Hz which are the key properties of a suitable capacitor. GBF10 also shows hydrophobic behavior (water uptake 2.89%) and low swelling ratio (1.143), providing an opportunity to use the composite film in fuel cell application. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 189–201     

Enhanced thermal and mechanical properties of poly (vinylidene fluoride) nanocomposites reinforced by liquid-exfoliated graphene

We report the preparation and enhanced thermal and mechanical properties of poly (vinylidine diflouride) (PVDF) nanocomposites reinforced by few-layer graphene flakes which are produced by the direct liquid-phase exfoliation of pristine graphite. Graphene flakes are found to homogeneously disperse in PVDF, reduce the bubble defects and thus the porosity of PVDF, and change PVDF’s crystallinity. Thermogravimetric analysis indicates that graphene can accelerate the fracture of hydrogen bond connecting PVDF and N-Methyl pyrrolidone molecules. 1.5?wt% graphene loading leads to around 20?°C enhancement in the melting temperature of PVDF. The mechanical properties like Young’s modulus (EIT), yield stress (σy), and hardness (H) of the nanocomposites are investigated by nanoindentation technique. A 1.0?wt% loading of graphene is found to increase EIT, σy, and H of PVDF by ～337%, ～102%, and ～228%, respectively.

• Highlights

• Few-layer graphene was produced by liquid-phase exfoliation.

• Graphene were added to PVDF to enhance thermal and mechanical properties of polymer.

• Mechanical properties of PVDF/graphene composite films were investigated by nanoindentation.