Polyhydrazides. IV. Preparation and properties of poly-N-ethyl- and isopropylhydrazide oxadiazoles

High molecular weight poly-N-alkylhydrazide-oxadiazoles have been prepared in poly-phosphoric acid by alkylation of poly-1,3,4-oxadiazole which was synthesized from terephthalic acid and hydrazine sulfate. Various kinds of reagents having an alkoxy group were used as alkylating agent, and N-ethylated and N-propylated polyhydrazides containing oxadiazole units were obtained. The thermal properties of the polymers obtained were investigated by using infrared spectroscopy, viscometry, differential thermometric and thermogravimetric techniques. Soluble poly-N-alkylhydrazide-oxadiazole are thermally cyclized to poly-1,3,4-oxadiazole with elimination of olefins and water at 226–330°C for propylated polydrazide and at 240–360°C for ethylated polyhydrazide. For both, weight loss in polyhydrazides occurs in two distinct stages corresponding, respectively, to cyclization and decomposition of the poly-1,3,4-oxadiazole formed in situ.     

Preparation of silicon-containing polymers IV. Thermally stable organosilicon poly-1,2,4-triazoles

Novel silicon-containing poly-1,2,4-triazoles have been synthesized by the reaction of polyhydrazide precursors and aniline in polyphosphoric acid (PPA) at 260°C. The polyhydrazide intermediates were prepared from aromatic dihydrazides and silicon-containing acid dichlorides via interfacial polycondensation. These polymers and their intermediates were characterized by infrared spectroscopy (IR), solubility, and by solution viscosity. The thermal behavior of these polytriazoles has been studied by dynamic thermogravimetry.     

Comparative study of the thermal properties of related aromatic polyhydrazides and poly(1,3,4-oxadiazole)s

Studies were undertaken to ascertain the thermal behavior of several new types of aromatic polyhydrazides and poly(1,3,4-oxadiazole)s containing different functional groups. Results of thermal analysis investigations indicate that all the polyoxadiazoles are remarkably heat-resistant when heated in nitrogen at elevated temperature but somewhat less heat-resistant than fully aromatic polyoxadiazoles. Most of the new polyoxadiazoles decompose when heated to about 450°C. The incorporation of tetraphenyl silane, hexafluoroisopropylidene, phthalido or phenoxytherephthalic groups into the main chain decrease the glass transition temperature of aromatic poly(1,3,4-oxadiazole)s. In the case of the silicon-containing polymers the glass transition temperature is independent of the other groups incorporated in the same macromolecule. The cyclization process of all investigated polyhydrazides takes place in the range between 320 and 390°C.     

Synthesis and characterization of 1,3,4-oxadiazole-containing polyazomethines

Novel 1,3,4-oxadiazole-containing polyazomethines were synthesized by the polycondensation of diamines, 2,5-bis (m-aminophenyl)-1,3,4-oxadiazole (BMAO) and 2,5-bis (p-aminophenyl)-1,3,4-oxadiazole (BPAO), with aromatic dialdehydes, isophthalaldehyde and terephthalaldehyde, in m-cresol at 20°C. These polymers were yellow to orange in color and had reduced viscosities up to 1.13 dL/g and electric conductivity as high as 10^?11?10^?12 S cm^?1. All the polyazomethines were insoluble in common organic solvents but dissolved in concentrated sulfuric acid. Thermogravimetry showed that thermal degradation started at around 400°C in air and nitrogen atmospheres. Doping with iodine markedly increased the conductivity and produced the black-colored semiconductive polyazomethines with a maximum conductivity of the order of 10^?6 S cm^?1. Electronic spectra of the undoped polymers indicated a large bathochromic shift of the absorption maxima due to C?N bonds of the monomer diamines (285 nm for BMAO and 315 nm for BPAO). This suggests that π-electrons of the polymers are extensively delocalized along the main chain.     

Two reaction routes for the preparation of aromatic polyoxadiazoles and polytriazoles: Syntheses and properties

Two reaction routes for the preparation of aromatic poly-1,3,4-oxadiazoles and poly-1,2,4-triazoles are studied and their influence on the physical properties, i.e., inherent viscosity, glass transition, degradation temperature, and film integrity of the final products are discussed. Aromatic poly-1,3,4-oxadiazoles are prepared by means of a polycondensation reaction of terephthaloyl chloride and isophthalic dihydrazide yielding a precursor polymer, poly(p, m-phenylene) hydrazide, which is converted into the corresponding poly-1,3,4-oxadiazole by means of a cyclodehydration reaction. Poly-1,3,4-oxadiazoles are also prepared by means of a polycondensation reaction between terephthalic and isophthalic acid and hydrazine yielding poly-1,3,4-oxadiazoles with higher inherent viscosities. Flexible poly-1,3,4-oxadiazole films are obtained only if the inherent viscosities of the polymers used are higher than 2.7 dL/g. The thermal stability is found to increase with increasing content of p-phenylene groups in the polymer backbone. Aromatic poly-1,2,4-triazoles are prepared using polyhydrazides with alternating para- and meta-phenylene groups and poly-1,3,4-oxadiazoles with a random incorporation of para- and meta-phenylene groups in the main chain as precursor polymers. The glass transition temperatures are found to increase with increasing content of p-phenylene groups in the main chain of these polymers. Cold crystallization is observed only for the alternating polymer. © 1994 John Wiley & Sons, Inc.     

Thermally stable polymers containing 1,3,4-oxadiazole units obtained from Huisgen reaction

Thermally stable polymers containing 1,3,4-oxadiazole units have been synthesized through Huisgen reaction of the aromatic/aliphatic bis-tetrazole compounds with the aromatic/aliphatic bis-acid chlorides in pyridine as solvent.The obtained polymers are insoluble or slightly soluble even in polar aprotic solvents such as DMSO and DMF.Relatively high inherent viscosity values（0.61-1.33 dL/g,in 0.125%H₂SO₄ at 25℃） were observed for these compounds.Thermal analyses of the polymers using DSC and TGA techniques showed that the polymers have improved thermal stabilities.The glass transition temperature has not been observed in the fully aromatic polymers,but the polymers obtained from 5-[6-（1H-tetrazol -5-yl）hexyl]-lH-tetrazole（Ⅳ） showed very clear T_g.A model reaction was also investigated and the resulting bis-1,3,4-oxadiazole compound was characterized by conventional spectroscopy methods.     

Poly(1,3,4-oxadiazole-amide)s containing pendent imide groups

A series of new poly(1,3,4-oxadiazole-amide)s containing pendent imide groups has been synthesized by solution polycondensation of aromatic diamines containing preformed 1,3,4-oxadiazole rings with two diacid chlorides containing imide rings. These polymers were also prepared by the reaction of the same diacid chlorides with p-aminobenzhydrazide which were subsequently cyclodehydrated in solid state. The polymers were soluble in polar amidic solvents and some of them gave transparent flexible films by casting from solutions. They showed high thermal stability with decomposition temperatures above 400°C and glass transition temperatures in the range of 245–327°C. They had low dielectric constants, in the range of 3.32–3.94, and good tensile properties.     

Syntheses and degradations of fluorinated heterocyclics II. Perfluoroalkyl and perfluoroalkylether-1,2,4-oxadiazoles

3-Perfluoroalkylether-5-perfluoro-n-heptyl-1,2,4-oxadiazole and 3,5-bis(perfluoroalkylether)-1,2,4-oxadiazole were synthesized and characterized. The 3,5-bis(perfluoroalkylether)-1,2,4-oxadiazole was subjected to thermal, thermal oxidative, and hydrolytic degradations at 235 and 325°C and was found to be stable under these conditions as evidenced by practically quantitative recovery of the test samples. In the presence of Jet-A-fuel at 235°C a low degree of degradation,～4%, was observed. 3,5-Bis(perfluoro-n-heptyl)-1,2,4-oxadiazole was found to be stable to attack by water at 325°C; however in air in the presence of Jet-A at 235°C the extent of degradation was in excess of 10%.     

Synthesis of 4-hetaryl-substituted 5-amino- and 5-sulfanyl-1,3-oxazole derivatives

Previously unknown 5-amino- and 5-sulfanyl-1,3-oxazole derivatives containing a 1,3,4-oxadiazole, 1,3,4-thiadiazole, or 1,2,4-triazole fragment at C⁴ were synthesized from accessible 1,3-oxazole-4-carboxylic acid hydrazides.     

New Heterocycles with a 3-Aminofurazanyl Substituent

New 3-aminofurazans containing 1,2,4- and 1,3,4-oxadiazole, pyridine, and 1,2,4-triazole substituents in the 4-position were synthesized.     

Aromatic polyamides with pendent acetoxybenzamide groups and thin films made therefrom

New aromatic polyamides containing 1,3,4-oxadiazole or benzonitrile units in the main chain and 5-(4-acetoxybenzamido) groups in the side chain have been synthesized and their properties have been characterized and compared with those of related polyamides and polyoxadiazole-amides. These polymers show good thermal stability, with initial decomposition temperature being at about 300 °C and glass transition temperature in the range of 260-280 °C. They are easily soluble in certain solvents such as N-methylpyrrolidinone (NMP), N,N^′-dimethylacetamide (DMA) and N,N^′-dimethylformamide (DMF) and can be cast from solutions into thin flexible films. The polymer films had tensile strengths in the range of 77-97 MPa, tensile moduli in the range of 2.3-2.6 GPa and elongation at break values ranging from 6% to 24%. One of the polymers containing the 1,3,4-oxadiazole ring exhibited blue fluorescence.     

Synthesis of 1,2,4-Triazol-3-ylmethyl-, 1,3,4-Oxa-, and -Thiadiazol-2-ylmethyl-1<Emphasis Type="Italic">H</Emphasis>-[1,2,3]-triazolo[4,5-<Emphasis Type="Italic">d</Emphasis>]pyrimidinediones

Summary. 1-Carbethoxymethyl-4,6-dimethyl-1H-[1,2,3]triazolo[4,5-d]pyrimidine-5,7(4H,6H)-dione was synthesized and treated with hydrazine hydrate to give the corresponding hydrazide. The latter hydrazide was treated either with phenylisothiocyanate or with carbon disulfide/alc. KOH to afford the corresponding thiosemicarbazide and oxadiazole derivatives. Alkylation of 2-mercapto-1,3,4-oxadiazole with dimethyl sulfate or ethyl chloroacetate gave the corresponding 2-methylthio-, and 2-ethylthioglycolate derivatives. Formation of 1,3,4-thiadiazole, 5-mercapto-1,2,4-triazole, and 1,3,4-oxadiazole were carried out by treating of the latter thiosemicarbazide with conc. H₂SO₄, NaOH/HCl, and HgO. Treating of 5-mercapto-1,2,4-triazole with ethyl chloroacetate afforded the thioglycolate ester. Hydrolysis of the latter with hydrazine hydrate afforded the hydrazide derivatives. Condensation of these hydrazides with monosaccharide aldoses gave the corresponding sugar hydrazones. The novel compounds were tested for antiviral activity against hepatitis B virus and showed moderate activities.     

微波促进下3-(2-苯并呋喃基)-4-氨基-5-巯基-1,2,4-三唑

微波辐射条件下, 首先由2-苯并呋喃甲酰肼依次与二硫化碳和水合肼反应合成3-(2-苯并呋喃基)-4-氨基-5-巯基- 1,2,4-三唑, 进一步在微波辐射条件下由4-氨基-5-巯基-1,2,4-三唑分别与芳甲酸/芳氧基乙酸、α-溴代苯乙酮及芳醛反应以较高产率制得了相应的1,2,4-三唑并[3,4-b]-1,3,4-噻二唑、1,2,4-三唑并[3,4-b]-1,3,4-噻二嗪及4-芳亚甲基亚胺基-5-巯基-1,2,4-三唑. 产物结构经IR, ¹H NMR, MS及元素分析进行了表征.     

Synthesis of 1,2,4-Triazol-3-ylmethyl-, 1,3,4-Oxa-, and -Thiadiazol-2-ylmethyl-1H-[1,2,3]-triazolo[4,5-d]pyrimidinediones

1-Carbethoxymethyl-4,6-dimethyl-1H-[1,2,3]triazolo[4,5-d]pyrimidine-5,7(4H,6H)-dione was synthesized and treated with hydrazine hydrate to give the corresponding hydrazide. The latter hydrazide was treated either with phenylisothiocyanate or with carbon disulfide/alc. KOH to afford the corresponding thiosemicarbazide and oxadiazole derivatives. Alkylation of 2-mercapto-1,3,4-oxadiazole with dimethyl sulfate or ethyl chloroacetate gave the corresponding 2-methylthio-, and 2-ethylthioglycolate derivatives. Formation of 1,3,4-thiadiazole, 5-mercapto-1,2,4-triazole, and 1,3,4-oxadiazole were carried out by treating of the latter thiosemicarbazide with conc. H₂SO₄, NaOH/HCl, and HgO. Treating of 5-mercapto-1,2,4-triazole with ethyl chloroacetate afforded the thioglycolate ester. Hydrolysis of the latter with hydrazine hydrate afforded the hydrazide derivatives. Condensation of these hydrazides with monosaccharide aldoses gave the corresponding sugar hydrazones. The novel compounds were tested for antiviral activity against hepatitis B virus and showed moderate activities.     

6-硝基苯并咪唑杂环衍生物的合成

以６－硝基苯并咪唑－１－乙酰肼和５－（６－硝基苯并咪唑－１－亚甲基）－３－巯基－４－氨基－１,２,４－三唑为原料,在不同条件下合成了一系列新的均三唑〔３,４－ｂ〕－１,３,４－噻二唑,１,２,４－三唑和１,３,４－恶二唑衍生物。化合物的结构均经元素分析、＾１Ｈ ＮＭＲ、ＩＲ和ＭＳ确证,并对其波谱性质进行了讨论。     

Design,synthesis, and characterization of some new benzimidazole derivatives and biological evaluation

A new series of benzimidazole derivatives ( 1-15 ) containing 1,2,4-triazole, 1,3,4-thiadiazole, 1,3,4-oxadiazole, and thiazolidinon rings have been synthesized. All new synthesized benzimidazole compounds were confirmed by ¹H NMR, ¹³C NMR spectra, and LC-MS, and they were examined for their antioxidant and antimicrobial activities. Compounds 7 and 1 showed the highest and the lowest antioxidant activities, respectively. The lowest minimum inhibition concentration value found in compound 5 against Enterobacter aerogenes.     

Preparation and properties of new wholly aromatic polyesters containing a terphenyl analogue of 1,3,4-thiadiazole in the main chain

Novel wholly aromatic polyesters 8 containing a terphenyl analogue of 1,3,4-thiadiazole (2,5-diphenyl-1,3,4-thiadiazole) in the main chain were synthesized by high-temperature solution polycondensation of a diacyl chloride derivative of 2,5-diphenyl-1,3,4-thiadiazole 6 with four hydroquinones 7 in 1-chloronaphthalene. These polymers 8 are insoluble in most organic solvents and decompose very rapidly above 400°C in air without showing thermotropic liquid crystalline melts.     

Poly(1,3,4-oxadiazole-ether-imide)s and their polydimethylsiloxane-containing copolymers

Poly(1,3,4-oxadiazole-ether-imide)s were prepared by thermal imidization of poly(amic-acid) intermediates resulting from the solution polycondensation reaction of a bis(ether-anhydride), namely 2,2′-bis-[(3,4-dicarboxyphenoxy)phenyl]-1,4-phenylenediisopropylidene dianhydride, with different aromatic diamines containing 1,3,4-oxadiazole ring, such as 2,5-bis(p-aminophenyl)-1,3,4-oxadiazole, 2,5-bis[p-(4-aminophenoxy)phenyl]-1,3,4-oxadiazole, 2-(4-dimethylaminophenyl)-5-(3,5-diaminophenyl)-1,3,4-oxadiazole. Poly(1,3,4-oxadiazole-ether-imide)-polydimethylsiloxane copolymers were prepared by polycondensation reaction of the same bis(ether-anhydride) with equimolar quantities of an aromatic diamine having 1,3,4-oxadiazole ring and a bis(aminopropyl)polydimethylsiloxane oligomer of controlled molecular weight. A solution imidization procedure was used to convert quantitatively the poly(amic-acid) intermediates to the corresponding polyimides. All the polymers were easily soluble in polar organic solvents such as N-methylpyrrolidone and N,N-dimethylacetamide. The polymers showed good thermal stability with decomposition temperature being above 400 °C. Solutions of some polymers in N-methylpyrrolidone exhibited blue fluorescence, having maximum emission wavelength in the range of 370-412 nm.     

Polyamides with pendant 1,3,4-oxadiazole and pyridine moieties

A novel aromatic diamine,2-（5-（3,5-diaminophenyl）-l,3,4-oxadiazole-2-yl）pyridine（POBD）,containing a pyridine ring and a 1,3,4-oxadiazole moiety,was synthesized.It was used in a polycondensation with various aromatic and aliphatic diacid chlorides to generate a series of new aromatic polyamides with pendant 1,3,4-oxadiazole groups.The prepared polyamides were characterized by IR,elemental analysis and through the synthesis of model compounds.Thermophysical properties of the synthesized polyamides have been studied by DSC,TGA and inherent viscosity measurements. Relatively high inherent viscosity values（0.76-1.62 dL/g,in 0.125%H₂SO₄ at 25℃） were observed for these compounds. Number average molecular weight（M_n） of the polymers was measured by vapor phase osmometry（VPO）.The introduction of bulky side chains in the structure of aromatic polyamides led to increased solubility of these polymers in common polar and aprotic solvents,such as DMF,DMSO,NMP and DMAc,which allowed thin films to be cast from polymer solutions. The highest molecular weight（M_n = 51190） was observed for polymer（DC）,which was prepared from pyridine-2,6-dichlorocarbonyl.     

Synthesis of poly(1,3,4-oxadiazole)s by direct polycondensation of dicarboxylic acids with hydrazine sulfate using phosphorus pentoxide/methanesulfonic acid as condensing agent and solvent

A convenient method for the synthesis of poly(1,3,4-oxadiazole)s of high molecular weights has been developed. These polymers were prepared readily by the direct polycondensation of dicarboxylic acids with hydrazine sulfate ( 1 ) using phosphorus pentoxide/methanesulfonic acid (PPMA) as both a condensing agent and solvent. Polycondensation of aliphatic dicarboxylic acids with 1 proceeded even at room temperature and produced poly(1,3,4-oxadiazole)s with inherent viscosities up to 1.4 dL/g. The synthesis of aromatic poly(1,3,4-oxadiazole)s from aromatic dicarboxylic acids containing phenyl ether structures was carried out by a one-pot procedure because the preactivation of dicarboxylic acids was required. The synthesis of 2,5-disubstituted-1,3,4-oxadiazoles by the reaction of carboxylic acids with 1 in PPMA was studied to demonstrate the feasibility of the reaction for polymer formation. The thermogravimetry of the aromatic poly(1,3,4-oxadiazole)s showed 10% weight loss both in air and in nitrogen at 440–490°C.