Quasiliving Carbocationic Polymerization. XII. Forced Ideal Copolymerization of lsobutylene with Styrene

Forced ideal carbocationic copolymerization of isobutylene/styrene systems has been achieved by continuous addition of mixed monomer feeds to 2-chloro-2,4,4-trimethylpentane/TiCl₄ in n-hexane/methylene chloride charge by keeping the input rate equal to the overall rate of copolymerization. The composition of the copolymers was identical to that of the feeds over the entire monomer concentration range. The number-average molecular weight of the copolymers increased almost linearly with the amount of consumed monomers at higher isobutylene concentrations in the feed. The molecular weight increase was less pronounced at higher styrene concentration because more methylene chloride had to be used in the solvent system to keep the copolymer in solution. The micro-structure of the copolymers is uniform as determined by gel permeation chromatography (UV plus RI) and ¹³C-NMR spectroscopy According to these studies, true copolymers have formed. The probability of triads in the copolymer has been determined.     

Quasiliving Carbocationic Polymerization. XV. Forced Ideal Copolymerization of Isobutylene-lsoprene

Forced ideal carbocationic copolymerization of isobutylene and isoprene has been achieved by continuous addition of monomer mixtures of different compositions to cumyl chloride/TiCl₄ charges at -50°C. The overall rate of copolymerization could be kept equal to that of addition rate with up to 10 mol% isoprene in the mixed monomer feed. In this monomer concentration range the composition of the copolymer was identical to that of the feeds. At higher diene concentrations in the feed, chain transfer to monomer and other side reactions (intramolecular cyclization, gel formation) could not be completely avoided. The number-average molecular weight of the copolymers increased almost linearly with the amount of consumed monomers at 10 mol% isoprene concentrations in the feed (i.e., in the quasiliving range). According to ¹H-NMR and ¹³C-NMR spectroscopy, the products are random copolymers.     

Quasiliving Carbocationic Polymerization. XIV. Synthesis of Poly(styrene-b-Isobutylene)

The synthesis of poly(styrene-b-isobutylenes) by the sequential addition of styrene and isobutylene has been accomplished. First a stream of styrene was added to a cumyl chloride/TiCl₄ in nhexane/methylene chloride charge at -50°C under quasiliving conditions. After the polystyrene block has reached a desirable sequence-length (molecular weight), gaseous isobutylene was continuously introduced to the quasiliving polystyrene carbocation until the polyisobutylene block also reached a desirable molecular weight. The M _n versus monomer input plot was uninterrupted and linear over both monomer introduction phases, indicating quasi-living conditions over the entire regime of block copolymer synthesis. The block copolymers have been characterized by selective solvent extraction and GPC, and their compositions determined by ¹H-NMR spectroscopy.     

Effect of zinc salts on the spontaneous copolymerization of 4-vinylpyridine with various electron-rich vinyl monomers

The spontaneous copolymerization of 4-vinylpyridine (4-VP) complexed with three different zinc salts (chloride, acetate, and triflate) with various electron-rich vinyl monomers (p-methoxystyrene, MeOSt; p-methylstyrene, MeSt; α-methylstyrene, α-MeSt; p-tert-butylstyrene, BuSt; styrene, St) was investigated in methanol at 75°C. Increasing the zinc salt concentration or the nucleophilicity of the electron-rich monomer increased the copolymer yields. All obtained copolymers are characterized by high molecular weight (10⁵) and broad molecular weight distribution. Both ¹H-NMR and elemental analyses confirmed the almost 1 : 1 copolymer structure. Changing the anion of the zinc salt does not have a considerable effect either on the copolymerization rate or on the molecular weight. The proposed mechanism exhibits the formation of a σ-bond between the β-carbons of the two donor–acceptor monomers. This creates the 1,4-tetramethylene biradical intermediate which can initiate the copolymerization reaction. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2787–2792, 1997     

Quasiliving Carbocationic Polymerization. IV. Polymerization of p-tert-Butylstyrene

The mechanism of polymerization of p-tert-butylstyrene (ptBuSt) initiated by the cumyl chloride/BCl₃ initiating system in CH₂Cl₂ at -50°C has been investigated. At and below ～0.4 M ptBuSt, quasiliving polymerizations proceed, i.e., initiation is instantaneous, termination is absent or reversible, and chain transfer to monomer can be suppressed or eliminated. In the quasiliving range the M _n versus [ptBuSt]₀ plot is linear and passes through the origin, and a M _w/M _n decreases much below 2.0 with decreasing [ptBuSt]. GPC traces change from broad multimodal to narrow monomodal and the color of polymerization charges change from colorless to golden-yellow with decreasing [ptBuSt]. The effect of temperature jump subsequent to monomer addition has been examined; however, it does not explain the peculiar monomer concentration effect on the mechanism. Changes in the ionicity may be responsible for this phenomenon.     

Quasiliving Carbocationic Polymerization. VII. Block Polymerization of α-Methylstyrene from Quasiliving Poly(isobutyl Vinyl Ether) Dication

Poly(α-methylstyrene-b-isobutyl vinyl ether-b-α-methylstyrene) triblock polymers have been prepared by blocking α-methyl-styrene (αMeSt) from biheaded quasiliving poly(isobuty1 vinyl ether) (PIBVE) cations generated with the bifunctional p-dicumyl chloride/AgSbF₆ initiating system in methylene chloride solvent at -90°C. The products were fractionated with 2-propanol, a good solvent for PIBVE and a nonsolvent for PaMeSt. The 2-propanol-insoluble fractions had much higher molecular weights (M _n = 30,500–69,100) than the starting PIBVE (M _n =6,600–10,600) and contained 13–29 wt% IBVE together with 87–71 wt% αMeSt units. The 2-propanol-soluble fractions (M _n = 7,300–11,600) contained ～90 wt% IBVE and ～10 wt% αMeSt units.     

Living Cationic Polymerization of α-Methylstyrene. 2. Synthesis of Block and Random Copolymers with 2-Chloroethyl Vinyl Ether and End-Functionauzed Polymers†

Abstract

Both AB and BA block copolymers of α-methylstyrene (αMeSt) and 2-chloroethyl vinyl ether (CEVE) were synthesized by the sequential living cationic polymerization initiated with the HCl-CEVE adduct (1a)/SnBr₄ system in CH₂Cl₂ at -78°C. αMeSt-CEVE (AB) block copolymers with narrow molecular weight distributions ([Mbar]_w/[Mbar]_n ～ 1.15) were obtained when αMeSt was polymerized first, followed by addition of CEVE to the resulting αMeSt living polymer solution. The reverse order of monomer addition, from CEVE to αMeSt, also led to a BA-type block copolymer. In the polymerization of a mixture of the two monomers, almost random copolymers were obtained. Living polymerizations of αMeSt were also induced with functional initiating systems, HCl-functionalized vinyl ether adducts (1b-1d)/SnBr₄, to give end-function-alized poly(αMeSt)s with a methacrylate, an acetate, or a phthalimide terminal.     

The Microstructure of Poly(Isobutylene-co-p-Methylstyrene) by NMR Spectroscopy

Abstract

The microstructure of isobutylene-para-methylstyrene (IB-pMeSt) copolymers was studied by NMR spectroscopy. ¹H- and ¹³C-NMR spectra were used to obtain overall copolymer compositions. ¹³C-NMR signals were assigned in terms of triad monomer sequences, and triad distributions were obtained over a wide copolymer composition range. According to statistical tests, the IB-pMeSt copolymerization cannot be described by zero- (Bernoullian) or first-order Markov models because reactivity ratios r _IB and r _pMeSt were found to change with the monomer feed composition. Additional insight into the microstructure of IB-pMeSt copolymers was gained by calculating sequence numbers, run numbers, and sequence lengths from triad distributions. Further, the Kelen-Tüdös plot showed a distinct curvature indicating that the Kelen-Tüdös method, applied over the entire monomer feed composition range, cannot give meaningful reactivity ratios for this monomer pair. Evidently the simple two-parameter Mayo-Lewis model is inadequate to describe the IB-pMeSt copolymerization system.     

Quasiliving Carbocationic Polymerization. XVII. Synthesis Of Poly (Styrene-β-Isobutylene-β-Styrene)

Poly(styrene-b-isobutylene-b-styrene) has been synthesized by sequential carbocationic polymerization under quasiliving conditions at -90°C. The quasiliving synthesis was effected by first continuously and slowly condensing gaseous isobutylene (IB) to a bifunctional initiating system (p-dicumyl chloride/TiCl₄) dissolved in a hexane-methylene chloride (60:40 v/v) mixture. After the quasiliving polyisobutylene (PIB) sequence had reached a desired molecular weight, styrene (St) was continuously and slowly added to produce the polystyrene (PSt) sequence. The products consisted of the target triblock. However, due to initiation by impurities and possibly to chain transfer to both IB and St, it also contained diblocks and small amounts of homopolymers. While the latter could be removed by selective fractionation, the triblocks and diblocks could not be separated. The mechanism of quasiliving polymerization leading to PIB/PSt blocks is discussed.     

Polymerization of coordinated monomers. XVIII. Sequence distribution in methyl acrylate–styrene copolymers prepared in the presence of zinc chloride

Methyl acrylate and styrene have been copolymerized in the presence of zinc chloride either by photoinitiation or spontaneously. The copolymerization mechanism is investigated by analyses of copolymers composition and monomer sequence distribution. The resulting copolymers are not always alternating, their composition being dependent especially on the monomer feed ratio. Appreciable deviation to higher methyl acrylate unit content from an equimolar composition occurs at monomer feed fractions of methyl acrylate over 0.7. The larger deviation is induced by higher temperature, by photoirradiation, and by greater dilution of the reaction mixture with toluene. The ¹³C-NMR spectrum of the alternating copolymer shows a sharp singlet at the carbonyl region, whereas the spectra of random copolymers prepared by benzoyl peroxide initiation at 60°C show a triplet splitting at the carbonyl carbon region, irrespective of copolymer composition. The relative intensities of the triplet peaks for the random copolymers are in good correspondence to the contents of triad sequences calculated by means of conventional radical copolymerization theory. These results clearly indicate that the carbonyl splitting is caused predominantly by variation of the monomer sequence and not by variation of the stereosequence. The monomer sequence distribution in the copolymers is thus directly and quantitatively measured from the split carbonyl resonance. Although the same triplet splitting appears in the spectra of methyl acrylate–rich copolymers prepared in the presence of zinc chloride at high feed ratios (>0.7) of methyl acrylate, the relative intensities of the split peaks do not fit the sequence distributions of random copolymers calculated by means of the Lewis–Mayo equation. The copolymerization yielding these peculiar sequences and the alternating sequence in the presence of zinc chloride is fully comprehended by a copolymerization mechanism proceeding between two active coordinated monomers, i.e., the ternary molecular complex composed of zinc chloride, methyl methacrylate, and styrene, and the binary molecular complex composed of zinc chloride and methyl methacrylate.     

Cationic copolymerization of indene with styrene derivatives: Synthesis of random copolymers of indene with high molecular weight

Random copolymers with high molecular weights of indene and p‐methylstyrene (pMeSt) were synthesized by cationic polymerization with trichloroacetic acid/tin tetrachloride in CH₂Cl₂ at low temperatures. When indene and pMeSt (1:1 v/v), for example, were polymerized at ?40 °C, both monomers were consumed at very similar rates to give a copolymer with high molecular weight [number‐average molecular weight (M_n): 8–9 × 10⁴]. This is indeed quite unexpected behavior for the combination of these two monomers because pMeSt polymerized over 1000 times faster than indene in the homopolymerization under the reaction conditions previously described. The product copolymer of indene and pMeSt had a random monomer sequence in it that was confirmed by NMR analyses and thermal‐property measurements. In sharp contrast with pMeSt, styrene and p‐chlorostyrene, which have no electron‐donating groups on the phenyl ring, led to low molecular weight polymers (M_n < 10,000) in the copolymerization with indene (1:1 v/v). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2449–2457, 2002     

Copolymerization of Isobutylene with α-Pinene

The copolymerization of isobutylene with α-pinene has been investigated by using EtA1Cb in ethyl chloride diluent at ca. -105°C. The copolymerizations proceeded readily and gave random copolymers of reasonably high molecular weights. Copolymer homogeneity, composition and structure was investigated by GPC, solubility behavior, PMR (60 and 300 MHz), CMR, reactivity ratio determination, and vulcanization behavior.     

Living carbocationic copolymerization of isobutylene with styrene

The carbocationic copolymerization of isobutylene (IB) and styrene (St), initiated by 2‐chloro‐2,4,4‐trimethylpentane/TiCl₄ in 60/40 (v/v) methyl chloride/hexane at ?90 °C, was investigated. At a low total concentration (0.5 mol/L), slow initiation and rapid monomer conversion were observed. At a high total comonomer concentration (3 mol/L), living conditions (a linear semilogarithmic rate and M_n–conversion plots) were found, provided that the St concentration was above a critical value ([St]₀ ～ 0.6 mol/L). The breadth of the molecular weight distribution decreased with increasing IB concentration in the feed, reaching M_w/M_n ～ 1.1. St homopolymerization was also living at a high total concentration, yielding polystyrene with M_n = 82,000 g/mol, the highest molecular weight ever achieved in carbocationic St polymerization. An analysis of this system by both the traditional gravimetric–NMR copolymer composition method and FTIR demonstrated penultimate effects. IB enrichment was found in the copolymers at all feed compositions, with very little drift at a high total concentration and above the critical St concentration. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1778–1787, 2007     

Living Carbocationic Copolymerizations. V. Synthesis of Isobutylene/p-Methylstyrene Copolymers with the Constant Copolymer Composition Technique in the Leidenfrost Reactor

Abstract

Living copolymerization of the isobutylene (IB)-p-methylstyrene (pMeSt) monomer pair in combination with the constant copolymer composition (CCC) technique produces high molecular weight ( M _n ≈ 100,000 g·mol^?1) and narrow molecular weight distribution ( M _w/ M _n ≈ 1.45) compositionally uniform IB/pMeSt copolymer molecules in the industrially important IB/pMeSt = 97–99/3–1 mol% composition range. Syntheses were carried out with TiCl₄ coinitiator in n-butyl chloride homogeneous solution at ?85°C by the use of the Leidenfrost reactor (i.e., by direct cooling of the charge with liquid nitrogen). In order to carry out the CCC technique it was necessary to obtain reliable copolymerization reactivity ratios. These investigations led to r_IB = 0.5 ± 0.1 and r _pMeSt = 10 ± 4. The attainment of CCC and living copolymerization conditions has been quantitatively demonstrated by dedicated diagnostic plots. Specifically, the attainment of CCC conditions was proven by the analysis of composite rate plots (comonomers input and corresponding copolymer formed versus time) and composition plots (comonomer composition in feed and copolymer formed versus weight of copolymer formed, W _p), and living copolymerization was proven by linearly ascending number-average molecular weight of copolymer ( M _n) versus W _p plots starting at the origin.     

Copolymerization with Depropagation

Free-radical copolymerizations of styrene with α-methylstyrene and methyl methacrylate and of acrylonitrile with α-methylstyrene have been carried out in the approximate regions of the ceiling temperatures of α-methylstyrene and methyl methacrylate. A theoretical treatment of copolymerization emphasizing the thermodynamic reversibility of particular propagation reactions has been compared with a kinetic treatment of copolymerization which emphasizes penultimate unit effects on the same propagation reactions. The former is found to adequately describe experimental copolymer composition data over a wide range of temperatures and over the complete range of monomer feed composition.     

Emulsion copolymerization of tribromophenyl maleimide with styrene

Emulsion copolymerization of Tribromophenyl Maleimide (TBPMI) and styrene was conducted by semi-batch and batch processes. The effects of monomer composition and copolymerization method on copolymerization rate, molecular weight and molecular weight distribution, latex particle size and size distribution, glass transition temperature (T_g), thermal stability and mechanical properties were investigated. A kinetic study has shown that the rate of copolymerization in the batch process increased with increasing TBPMI content in the monomer feed. For the semi-batch polymerized samples, molecular weight decreased and molecular weight distribution increased with increasing TBPMI content in the monomer feed. For the batch polymerized samples, molecular weight also decreased but no obvious tendency was observed for the molecular weight distribution when TBPMI content increased. Compared with the batch copolymers, the semi-batch copolymers have a higher molecular weight at the same initial monomer mixture composition. Latex particle size decreased, while particle size distribution slightly increased with increasing TBPMI content in both semi-batch and batch latices. The semi-batch samples exhibit only a single T_g, the value of which increses linearly with increasing TBPMI content. For the batch copolymers, two T_gs were found, reflecting a mixture of styrene-rich and TBPMI-rich copolymer chains. TGA results indicate that the thermal stability of the semi-batch copolymers increased with increasing TBPMI concentration. Young's and flexural moduli increased, while tensile and flexural strengths decreased by increasing the TBPMI content for both the semi-batch and batch specimens. The semi-batch specimens have higher tensile and flexural strenghts than the batch ones.     

Grafting copolymerization of styrene and maleic anhydride binary monomer systems induced by UV irradiation

Photografting copolymerization of maleic anhydride (MAH) and styrene (St) onto LDPE film was investigated by using a one-step method, and further thermally induced grafting copolymerization of them was carried out by using a two-step method. Regarding the photografting copolymerization of MAH/St binary monomer system, both conversion percentage (CP) and grafting efficiency (GE) increased with raising the content of MAH in the monomer feed. In addition, the content of MAH in the grafted copolymers also increased with increasing the fraction of MAH in the monomer feed. The formation of LDPE-g-P(MAH-co-St) grafted film was identified by FTIR and ESCA spectroscopy. In the case of grafting copolymerization of MAH/St by the two-step method, grafting copolymerization proceeded slowly compared with the non-grafting copolymerization. The apparent activation energy (E_a) for the non-grafting copolymerization in the solution and the grafting copolymerization on LDPE film was 24 and 82 kJ/mol, respectively, which were noticeably lower than those of MAH/vinyl acetate (MAH/VAC) binary monomer system under the similar grafting conditions. These data of E_a explained why the grafting copolymerization of styrene/MAH took place faster than that of MAH/VAC binary monomer system. The composition of the grafted copolymer chains was largely affected by the composition of the monomer feeds; however, the composition of the non-grafted copolymers nearly remained at 1/1 even in systems with largely different MAH/styrene ratios in monomer feeds. It is indicated that the non-grafting copolymerization proceeded predominantly following alternating copolymerization, but the grafting copolymerization performed random copolymerization.     

Über die Copolymerisation von Maleinsäure-anhydrid mit Bicyclo [2.2.1] hept-5-en-2-Carbonsäure

Radiation-induced and radical-initiated copolymerizations of norbornencarboxylic acid with maleic anhydride have been studied. In both cases decarboxylation occurs during the copolymerization; the composition of the copolymers is independent of the method of initiation and of the composition of the initial monomer feed. The decarboxylation is caused by the norbornencarboxylic acid and not by maleic anhydride. This result is supported by the observation that, during the radical homopolymerization of norbornencarboxylic acid also, carbon dioxide is split off.     

双官能团引发剂进行的基团转移嵌段共聚

嵌段共聚物的合成技术有较大的可靠性和预见性,并可提供别的聚合物所不能达到的特殊性能。用基团转移聚合的方法进行丙烯酸酯类极性单体室温下的活性聚合,能得到具有预定链长、嵌段纯度和多分散性指数小的嵌段共聚物。用双官能团引发剂进行基团转移嵌段共聚,可减少加单体的次数,避免引进杂质,且能合成用单官能团引发剂所无法得到的A—B—     

Determination of chain transfer constant to dodecanethiol in styrene/methyl methacrylate and butyl acrylate/methyl methacrylate copolymerization and effect of chain length on composition and stereochemical configuration of copolymers

Free radical copolymerization of styrene/methyl methacrylate (S/MMA) and butyl acrylate/methyl methacrylate (BA/MMA) in the presence of n-dodecanthiol (DDT) has been studied at 60°C in a 3 mol/L benzene solution using 2,2′-azobis(isobutyronitrile) (AIBN) as initiator. Overall chain transfer constant to DDT has been determined for both copolymerization systems, as a function of monomer feed composition using complete molecular weight distribution and the Mayo method. Overall transfer coefficients have values which are dependent on both monomer feed composition and individual comonomer transfer values. Composition, sequence distribution, and stereoregularity of copolymers obtained are, in our experimental conditions, independent of copolymer molecular weight. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2913–2925, 1998