Polymerization of acrylonitrile initiated by ceric ion–citric acid redox system

Heterogeneous polymerization of acrylonitrile initiated by ceric ammonium sulfate–citric acid (C.A.) redox system is reported at 35 ± 0.2°C under nitrogen atmosphere. The rate of monomer disappearance is found to be proportional to [C.A.]⁰, [Ce⁴⁺]^0.63, and [Monomer]^1.59. The rate of ceric ion disappearance is directly proportional to ceric ion concentration but independent of monomer concentration. The initial rate was independent of [H₂SO₄]. The molecular weight of polyacrylonitrile increases with increasing monomer concentration and decreasing ceric ion concentration. Activation energy was found to be 27.9 kJ/mol.     

Polymerization of Methacrylamide Initiated by Ceric Ion-Citric Acid Redox System

Homogeneous polymerization of methacrylamide initiated by the ceric ammonium sulfate-citric acid (CA) redox pair has been investigated and reported at 35 ± 0.2°C under nitrogen atmosphere. The initiation was caused by the free radical generated by the decomposition of the complex formed between ceric ion and citric acid. The rate of monomer disappearance was found to be proportional to [CA]^0.4, [Ce^0.4+]^0.65, and [Monomer]¹ The rate of ceric ion disappearance was directly proportional to the ceric ion concentration but independent of the monomer concentration. The initial rate was independent of [H₂SO₄]. The activation energy of the system was found to be 21.4 kJ/mol.     

Kinetics and mechanism of the oxidation of a ferrous complex with an α,α′-diimine chelate ligand by ceric sulfate in aqueous acidic medium by UV-vis absorption spectroscopy

Kinetics of the oxidation of tris(2,2′-bipyridine)iron(II) sulfate by ceric sulfate was spectrophotometrically studied in an aqueous sulfuric acid medium. Different methods, including isolation, integration and half-life, were employed to determine the reaction order. The redox reaction was found to be first-order with respect to the reductant, tris(2,2′-bipyridine)iron(II) sulfate, and the oxidant, ceric sulfate. Complex kinetics was observed with an increase in the initial concentration of the oxidant. The influence of the dielectric constant, [H⁺] and [SO₄ ^2-] on the rate was also investigated. The increase in the dielectric constant and H⁺ ion concentration of the medium retard the rate, while an increase in the SO₄ ^2- ion concentration first accelerates the rate, and then retards the reaction. The effect of each factor, i.e., the dielectric constant, H⁺ ions and SO₄ ^2- ions, suggests that Ce(SO₄)₃ ^2- is the active species of cerium(IV). A rate law consistent with the observed kinetic data and the proposed mechanism is suggested to be: {fx631-1     

Highly branched acrylamide graft copolymer

Acrylamide graft copolymerization onto poly(3-O-methacryloyl D -glucose) (PMG) as a backbone was performed by the ceric ion method. The number of polyacrylamide (PAM) chains grafted was dependent upon the concentration ratio of the redox catalyst system at constant acid concentration and increased in proportion to the ceric ion concentration. A maximum number of grafts obtained, for example, was 29 onto PMG (DP = 244) under the conditions [Ce⁴⁺]/[PMG] = 1/5, [H⁺] = 1.0 × 10^?2 mole/l. In other words, the graft frequency was 12 per 100 monomer units of PMG. Such a high frequency of the grafts was, however, greatly decreased when the acid concentration was increased. Characteristics of the highly branched structure were revealed by the relationship between intrinsic viscosity and graft frequency, which showed a downward curvature with the increasing graft frequency. Influences of acid and ceric ion concentrations on the copolymerization were kinetically evaluated. The rate of polymerization was found to be first-order with respect to ceric ion and proportional to the square of the reciprocal acid concentration. The result suggests that the graft frequency is dependent upon the rate of polymerization.     

Kinetics of metal exchange reaction of Cu(II)-poly(vinyl alcohol) complex with Ca(II)-ethylenediamine-N,N,N′,N′-tetraacetic acid in aqueous solution

The kinetics of the metal exchange reaction between the Cu(II)-poly(vinyl alcohol) complex (Cu(II)-PVA) and Ca(II)-ethylenediamine-N,N,N′,N′-tetraacetic acid (Ca(II)-EDTA) were studied by mixing both solutions in a spectrophotometer at pH 9.7–11.0, at μ = 0.10(KNO₃) and at 25°C. The reaction is initiated by the formation of unstable Cu(II)-H-PVA by the attack of H⁺ to Cu(II)-PVA, and while both ligand exchange and metal exchange steps occur, the latter may be rate-determining. The kinetic expression of this reaction was determined as -d[Cu(II)-PVA]/dt = k[Cu(II)-PVA] [H⁺] [PVA]/[Ca(II)-EDTA], where k = k₁ + k′₂[H⁺], k₁ = 3.85 × 10⁻² sec⁻¹, k₂ = k′₂ · K^−H_Cu(II)-H-PVA 9.59 × 10⁵ 1 mol⁻¹ sec⁻¹.     

Ruthenium (VIII) mediated oxidation of some aliphatic and alicyclic ketones by periodate-ruthenium (III) system in aqueous HClO4 medium

The kinetics of Ruthenium(III) chloride mediated oxidation of acetone, 2-butanone, 4-methyl-2-pentanone, 2-pentanone, cyclopentanone, and cyclohexanone by sodium periodate in aqueous HClO₄ media was zero-order in [IO₄⁻] and first-order in [ketone]. The reaction was independent of added [Ru(III)] and showed first-order dependence on [H⁺] for all the ketones studied, except acetone. In the case of acetone at [H⁺] < 0.05 M, the rate was independent of [H⁺], the order in [Ru(III)] being unity; but at [H⁺] > 0.05 M the reaction showed unit dependence on [H⁺] and the order in [Ru(III)] was zero. Ruthenium(VIII) generated in situ is postulated as the hydride abstracting species. A mechanism involving enolization as the rate determining step is proposed. Acetone at lower acidity of the medium is shown to react directly with Ru(VIII). In the absence of ruthenium(III) chloride, the kinetics were first-order in [IO₄⁻], [ketone], and [H⁺]. Structure-reactivity relationship is discussed and thermodynamic parameters are reported. © 1996 John Wiley & Sons, Inc.     

Chemical ionization mass spectra of alkylphenol and linear alcohol polyethoxylates

The chemical ionization mass spectra of some tert-octylphenol ethoxylates and linear alcohol ethoxylates have been determined using methane and ammonia as reactant gases. Proton, [C₂H₅]⁺ and [C₃H₅]⁺ adducts were observed with attachment on the ring as well as on the oxyethylene chain for the tertiary octylphenol ethoxylates. Proton and [NH₄]⁺ addition reactions were also observed. Alkyl ion and olefin displacement reactions were also important fragmentations. Hydride abstraction and proton, [C₂H₅]⁺, [C₃H₅]⁺ and [NH₄]⁺ attachment were the most important reactions occurring for the linear alcohol ethoxylates.     

Kinetics and mechanism of the reaction between dimethylformamide and chromium(VI)

The kinetics of oxidation of N,N‐dimethylformamide by chromium(VI) has been studied spectrophotometrically in aqueous perchloric acid media at 20°C. The rate showed a first‐order dependence on both [Cr(VI)] and [DMF], and increased markedly with increasing [H⁺]. The order with respect to [HClO₄] was found to lie between 1 and 2. The rate was found to be independent of ionic strength as well as of any inhibition effect of Mn(II). The formation of superoxochromium(III) ion was detected in an aerated solution of chromium(VI), DMF and HClO₄. The proposed mechanism, involving two reaction pathways, leads to the rate law, rate = K_a1 [HCrO₄⁻] [DMF] (k_I K_a2 [H⁺]²+k_II[H⁺]). The first pathway, with rate constant k_I, involves the formation of chromium(V) and a free radical. The second pathway, with rate constant k_II, involves the formation of Cr(IV), CO₂ and dimethylamine. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet 31: 409–415, 1999     

Molybdenum(VI) catalysis of perborate or hydrogen peroxide oxidation of iodide ion

Summary Perborate in aqueous solution generates H₂O₂; in its presence the molybdenum(VI) catalysed oxidation of iodide ion is first order with respect to the oxidant and catalyst, and is independent of [I^–] and [H⁺]. Kinetic studies point to peroxymolybdenum(VI) species as the oxidizing species.     

The structures of [C4H4]+˙ ions by photodissociation in an ion cyclotron resonance spectrometer

The photodissociation of [C₄H₄]⁺˙ fragment ions at the ion cyclotron resonance time-scale competes with relaxation of the internal energy by infrared emission. As a result the fraction of photodissociating ions increases with light intensity. The experiments indicate that [C₄H₄]⁺˙ from benzene and 1,5-hexadiyne consists of a mixture of 60% vinyl acetylene ions, 10% butatriene ions and 30% cyclic ions. This confirms previous conclusions from studies of the ion-molecule reactions of [C₄H₄]⁺˙ with benzene.     

Kinetics and mechanism of Rh(III) catalyzed oxidation of styrene,stilbene and phenylacetylene by acid periodate

The kinetics of Rh(III) catalyzed oxidative cleavage of styrene, stilbene, and phenylacetylene by periodate have been investigated in the presence of HClO₄ in aqueous acetic acid medium. The kinetic orders are completely dependent on the nature of unsaturation. In the cases of styrene and stilbene the reactions are first order in the oxidant and Rh(III), zero order with respect to the substrate, and independent of [H⁺], whereas in the case of phenyl acetylene the reaction is zero order with respect to the oxidant and first order with respect to the substrate and Rh(III). The reaction is independent of [H⁺] in the range of 0.01?0.05M studied. A mechanism involving higher Rh(V) species has been postulated in the case of styrene as well as stilbene, and metal ion catalyzed hydration has been postulated in case of phenylacetylene. The influence of the solvent has been investigated, and a comparative analysis of the kinetic orders of styrene and stilbene is made with those of phenylacetylene.     

The effect of vibrational energy content on the neutralization–reionization mass spectra of [H2]+˙ ions

Neutralization-reionization experiments were performed on beams of [H²]⁺˙ ions of different, known vibrational energy content using a variety of neutralization target gases (Xe, H₂, Ne) and reionization gases (He, O₂). The recovery of [H₂]⁺˙ ions was found to be only weakly dependent on the vibrational energy of the original [H₂]⁺˙ ions. The ion kinetic energy spectra of H⁺ fragments from the neutralization-reionization experiments were independent of the collision gas; the processes by which they were generated were identified.     

Elucidation of artefacts in proton transfer reaction time‐of‐flight mass spectrometers

We present an effective procedure to differentiate instrumental artefacts, such as parasitic ions, memory effects, and real trace impurities contained in inert gases. Three different proton transfer reaction mass spectrometers were used in order to identify instrument‐specific parasitic ions. The methodology reveals new nitrogen‐ and metal‐containing ions that up to date have not been reported. The parasitic ion signal was dominated by [N₂]H⁺ and [NH₃]H⁺ rather than by the common ions NO⁺ and O₂⁺. Under dry conditions in a proton transfer reaction quadrupole interface time‐of‐flight mass spectrometer (PTR‐QiTOF), the ion abundances of [N₂]H⁺ were elevated compared with the signals in the presence of humidity. In contrast, the [NH₃]H⁺ ion did not show a clear humidity dependency. On the other hand, two PTR‐TOF1000 instruments showed no significant contribution of the [N₂]H⁺ ion, which supports the idea of [N₂]H⁺ formation in the quadrupole interface of the PTR‐QiTOF. Many new nitrogen‐containing ions were identified, and three different reaction sequences showing a similar reaction mechanism were established. Additionally, several metal‐containing ions, their oxides, and hydroxides were formed in the three PTR instruments. However, their relative ion abundancies were below 0.03% in all cases. Within the series of metal‐containing ions, the highest contribution under dry conditions was assigned to the [Fe(OH)₂]H⁺ ion. Only in one PTR‐TOF1000 the Fe⁺ ion appeared as dominant species compared with the [Fe(OH)₂]H⁺ ion. The present analysis and the resulting database can be used as a tool for the elucidation of artefacts in mass spectra and, especially in cases, where dilution with inert gases play a significant role, preventing misinterpretations.     

Mass spectrometry of homoadamantane derivatives

Homoadamantane derivatives can be divided into two groups according to their mass spectra. To the first group belong compounds with electron attracting substituents (COOH, CI, COOCH₃, Br); compounds with electron releasing substituents (OCH₃, OH, NH₃, NHCOCH₃) constitute the second group. The most characteristic feature of the first group compounds is the splitting off of the substituent. The hydrocarbon fragment [C₁₁H₁₇]⁺ thus formed then loses olefin molecules with the formation of corresponding ionic species C_11?nH_17?2n. The 3-substituted compounds of this group undergo thermal Wagner-Meerwein type rearrangements into adamantane derivatives, resulting in the [C₁₀H₁₅]⁺ (m/e 135) ion formation; this is the main difference between 1- and 3-substituted homoadamantanes. The series of [C_nH_2n?6X]⁺ ions (where X = OCH₃, OH, NH₂, NHCOCH₃, n = 6 to 10) are characteristic of the mass spectra of the second group compounds, the ion [C₆H₆X]⁺, [M ? C₅H₁₁]⁺ being the most abundant. The intensity ratio of [M ? C₅H₁₁]⁺ to [M ? C₄H₉]⁺ ions is 10:1 for 1-substituted and 3:1 for 3-substituted compounds of this group, allowing the location of the substituent. Some individual features of the spectra are also reported.     

Grafting onto wool. III. Graft copolymerization of poly(vinyl acetate) by use of fenton's reagent as initiator

In an attempt to modify fibrous protein, poly(vinyl acetate) has been graft copolymerized onto Himachali wool in an aqueous medium by using Fenton's reagent as redox initiator. Graft copolymerizations were carried out at 25, 30, 35, 40, and 45°C for a period of 3 hr. Percentage grafting was found to be dependent upon reaction temperature, concentration of monomers, and the molar ratio of [H₂O₂]/[Fe⁺²]. Maximum grafting occurred at 45°C with a molar ratio of [H₂O₂]/[Fe⁺²] = 1.43. A small amount of grafting (2.6–2.8%) occurred when grafting was effected at 45°C in the presence of Fe⁺² alone.     

Aqueous polymerization of methyl methacrylate initiated by the redox system Ce(IV)–isopropyl alcohol. Kinetics and molecular weight

Polymerization of methyl methacrylate was carried out in aqueous nitric acid in the temperature range 26–40°C, with the redox initiator system ceric ammonium nitrate–isopropyl alcohol. A short induction period was observed, as well as the attainment of a limiting conversion, and the total ceric ion consumption with reaction time. The reaction orders were 1/2 and 3/2 with respect to the IPA and monomer concentration, respectively, within the range (3–5) × 10^?3M of Ce(IV). But at lower Ce(IV) concentration (≤ 1 × 10^?3M), the order with respect to monomer and Ce(IV) changed to 1 and 1/2, respectively. The rate of ceric ion disappearance was first order with respect to Ce(IV) concentration and (R_Ce)^?1 was proportional to [IPA]^?1. Both the rate of polymerization and the rate of ceric ion consumption increase with rise in temperature. The average-molecular weight can be controlled by variations in IPA, Ce(IV), and monomer concentrations, and in temperature. A kinetic scheme involving oxidation of IPA by Ce(IV) via complex formation, whose decomposition gives rise to a primary radical, initiation, propagation, and termination of the polymeric radicals by bimolecular interaction is proposed. An oxidative termination of primary radicals by Ce(IV) is also included.     

Metastable ion decomposition and collisional activation mass spectra of 1,2,3-triarylpropen-1-ones

Substituents have been found to have a marked influence on the metastable ion decompositions and collisionally activated (CA) fragmentations of the M⁺˙ ion of a number of 1,2,3-triarylpropen-1-ones. An attempt has been made to confirm the structures of the rearrangement ions, [C₁₄H₁₀]⁺˙, [C₁₃H₁₁]⁺˙, [C₁₃H₉]⁺ and [C₁₂H₈]⁺˙ by comparison of their CA spectra with those of the corresponding ions produced from reference compounds. The results imply that [C₁₄H₁₀]⁺˙ and the M⁺˙ ions of phenanthrene and diphenylacetylene have a common structure, [C₁₃H₉]⁺ and the fluorenyl cation have a common structure and [C₁₂H₈]⁺˙ and biphenylene molecular ion have a common structure. The available data indicate that the ion at m/z 167 consists of a mixture of structures, likely possibilities being diphenylmethyl, phenyltropylium and dihydrofluorenyl cations.     

Metastable transitions in the mass spectra of ketals and ketones. Competition between loss of small and large radicals

An investigation of competing metastable transitions in the mass spectra of ethylene ketals R_SR_LC(OCH₂)₂ (where R_L is a larger n-alkyl group than R_S) has established that in most cases R_S is lost with a lower activation energy than R_L. This technique has also been applied to ketones R_SR_LC?O, to show again that R_S is usually lost with the lower activation energy (thus supporting earlier data based on relative daughter ion abundances at the threshold). In the classes of compounds so far investigated, although [M⁺ ? R_S] ions are formed with lower activation energies than [M⁺ ? R_L] ions, the ion yield of [M⁺ ? R_S] ions is anomalously low from ions of high internal energy. Factors which may influence the [M⁺ ? R_S]/[M⁺ ? R_L] ratio of daughter ion intensities are examined. It is suggested that at the threshold [M⁺ ? R_S] and [M⁺ ? R_L] ions may be formed with rearrangement, or from an electronic state that cannot be effectively populated from molecular ions of high internal energies.     

Polymerization of iso-butyl vinyl ether by oxychlorides of group V and VI elements

Chromyl chloride (CrO₂Cl₂) causes facile polymerization of iso-butyl vinyl ether (IBVE). In contradiction to the existing report, CrO₂Cl₂ alone or in combination with conventional modifiers fails to produce stereoregular poly(IBVE). Because of the fast polymerization at ambient temperature (30°), the kinetics of the polymerization of IBVE by CrO₂Cl₂ were studied at 0° and 15°. The polymerization is first order in CrO₂Cl₂ and second order in IBVE upto a threshold monomer concentration thereafter becoming independent of [IBVE]. The polymerization is inhibited by pyridine. Addition of HCl to CrO₂Cl₂ increases both rate of polymerization (R_P) and [η]. Added water does not affect R_P upto [H₂O]/[CrO₂Cl₂] ≈ 1.33 but thereafter enhances it sharply upto [H₂O]/[CrO₂Cl₂] ≈ 5.32. With increasing [H₂O], [η] falls to a limiting value. [η] is independent of [CrO₂Cl₂] but increases with [IBVE] upto 1.0mole/l. Both R_P and [η] show a maximum at 47° in the Arrhenius plot over the range 10–72°. The features have been explained on the basis of a conventional cationic mechanism.     

Evidence of protonation during the oxidation of some aryl alcohols by permanganate in perchloric acid medium and mechanism of the oxidation processes

The oxidation of benzyl alcohol and methoxy-, chloro-, and nitro- substituted benzyl alcohols by permanganate has been studied in aqueous and acetic acid medium in presence of perchloric acid. The reaction is first-order in [MnO₄^?] and [XC₆H₄CH₂OH], but the order is complex with respect to [H⁺]. Different thermodynamic parameters have been evaluated. The reaction occurs through the protonation of alcohol in a fast preequilibrium followed by a slow rate-determining oxidation step. A two-electron transfer oxidation step has been suggested for benzyl alcohol and chloro- and nitro- substituted alcohols, while the oxidation of methoxy compounds involves a one-electron transfer via a free-radical mechanism. © 1995 John Wiley & Sons, Inc.