Organic/Inorganic NLO materials based on reactive polyimides and a bulky alkoxysilane dye via sol/Gel process

A series of the organic–inorganic materials based on reactive polyimides and a bulky alkoxysilane dye (ASD) for second‐order nonlinear optics have been developed. Sol‐gel reaction of ASDs is utilized to grow a network in polymer matrices (composite) or to create inter‐polymer network among polyimide chains (hybrid). Moreover, a full interpenetrating polymer network (IPN) was formed through simultaneous free radical polymerization of a methacryloyl group containing polyimide, and sol‐gel process of ASDs. Scanning electron microscopy (SEM) results indicate that the inorganic networks are distributed uniformly throughout the polymer matrices on the molecular scale. The silica particle sizes are well under 1 µm based on AFM study. Second harmonic coefficients, d₃₃ of 4.5 to 48.5 pm/V have been obtained for the optically clear poled/cured polyimide/ASD samples. Excellent temporal stability was obtained for these NLO materials at 100 °C. The dynamic thermal and temporal stabilities of the IPN system were much better than those of composite and hybrid systems. Copyright ­© 2003 John Wiley & Sons, Ltd.     

An Organic/Inorganic Hybrid Polymer

Poly(N-acetylethylenimine) (polyoxazoline) (POZO) with a terminal triethoxysilyl group was successfully synthesized by the ring-opening polymerization of 2-methyl-2-oxazoline followed by termination with 3-aminopropyltriethoxysilane. Triethoxysilyl-terminated telechelic POZO was prepared by using a bifunctional initiator. These silane coupling POZOs were subjected to acid-catalyzed cohydrolysis polymerization with tetraethoxysilane by the so-called “sol-gel” method to produce a novel organic/inorganic hybrid polymer (block copolymer), which was a homogeneous transparent/glassy composite material. The obtained hybrid showed higher hydrophilic properties compared with silica gel without POZO segments. On the other hand, a hybrid polymer consisting of poly(2-ethyl-2-oxazoline) and silica gel, which absorbed both water and organic solvents, showed amphiphilic properties. POZO segments were eliminated by pyrolysis of the present hybrid polymer to produce a silica with micropores.     

Preparation and properties of poly(styrene-co-maleic anhydride)/silica hybrid materials by the in situ sol–gel process

Poly(styrene-co-maleic anhydride)/silica hybrid material has been successfully prepared from styrene–maleic anhydride copolymer and tetraethoxysilane (TEOS) in the presence of a coupling agent (3-aminopropyl)triethoxysilane (APTES) by an in situ sol–gel process. It was observed that the gel time of sol–gel solution was dramatically influenced by the amount of APTES. The hybrid material exhibits optical transparency almost as good as both silica gel and the copolymer. The covalent bonds between organic and inorganic phases were introduced by the aminolysis reaction of the amino group with maleic anhydride units of copolymer to form a copolymer bearing trimethoxysilyl groups, which undergo hydrolytic polycondensation with TEOS. The differential scanning calorimetry (DSC) showed that the glass transition temperature of the hybrid materials increases with increasing of SiO₂ composition. Photographs of scanning electron microscopy (SEM) and atomic force microscopy (AFM) inferred that the size of the inorganic particles in the hybrid materials was less than 20 nm. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1607–1613, 1998     

Silica–gelatin hybrids for tissue regeneration: inter-relationships between the process variables

Owing to their diverse range of highly tailorable material properties, inorganic/organic hybrids have the potential to meet the needs of biodegradable porous scaffolds across a range of tissue engineering applications. One such hybrid platform, the silica–gelatin sol–gel system, was examined and developed in this study. These hybrid scaffolds exhibit covalently linked interpenetrating networks of organic and inorganic components, which allows for independent control over their mechanical and degradation properties. A combination of the sol–gel foaming process and freeze drying was used to create an interconnected pore network. The synthesis and processing of the scaffolds has many variables that affect their structure and properties. The focus of this study was to develop a matrix tool that shows the inter-relationship between process variables by correlating the key hybrid material properties with the synthesis parameters that govern them. This was achieved by investigating the effect of the organic (gelatin) molecular weight and collating previously reported data. Control of molecular weight of the polymer is as an avenue that allows the modification of hybrid material properties without changing the surface chemistry of the material, which is a factor that governs the cell and tissue interaction with the scaffold. This presents a significant step forward in understanding the complete potential of the silica–gelatin hybrid system as a medical device.     

Sol–gel derived organic–inorganic hybrid materials: synthesis,characterizations and applications

Organic/inorganic hybrid materials prepared by the sol–gel approach have rapidly become a fascinating new field of research in materials science. The explosion of activity in this area in the past decade has made tremendous progress in both the fundamental understanding of the sol–gel process and the development and applications of new organic/inorganic hybrid materials. Polymer-inorganic nanocomposite present an interesting approach to improve the separation properties of polymer material because they possess properties of both organic and inorganic such as good permeability, selectivity, mechanical strength, and thermal and chemical stability. Composite material derived by combining the sol–gel approach and organic polymers synthesis of hybrid material were the focus area of review It has also been demonstrated in this review that a more complete understanding of their structure–property behavior can be gained by employing many of the standard tools that are utilized for developing similar structure–property relationships of organic polymers. This review article is introductory in nature and gives introduction to composite materials/nanocomposite, their applications and the methods commonly employed for their synthesis and characterization. A brief literature survey on the polysaccharide templated and polysaccharide/protein dual templated synthesis of silica composite materials is also presented in this review article.     

Synthesis of biocompatible hydrophobic silica-gelatin nano-hybrid by sol-gel process

Silica-biopolymer hybrid has been synthesised using colloidal silica as the precursor for silica and gelatin as the biopolymer counterpart. The surface modification of the hybrid material has been done with methyltrimethoxysilane leading to the formation of biocompatible hydrophobic silica-gelatin hybrid. Here we are reporting hydrophobic silica-gelatin hybrid and coating precursor for the first time. The hybrid gel has been evaluated for chemical modification, thermal degradation, hydrophobicity, particle size, transparency under the UV-visible region and morphology. FTIR spectroscopy has been used to verify the presence of CH(3) groups which introduce hydrophobicity to the SiO2-MTMS-gelatin hybrids. The hydrophobic property has also been tailored by varying the concentration of methyltrimethoxysilane. Contact angle by Wilhelmy plate method of transparent hydrophobic silica-gelatin coatings has been found to be as high as approximately 95 degrees . Oxidation of the organic group which induces the hydrophobic character occurs at 530 degrees C which indicates that the surface hydrophobicity is retained up to that temperature. Optical transmittance of SiO2-MTMS-gelatin hybrid coatings on glass substrates has been found to be close to 100% which will enable the hybrid for possible optical applications and also for preparation of transparent biocompatible hydrophobic coatings on biological substrates such as leather.     

Acrylic polymer/silica hybrids prepared by emulsifier‐free emulsion polymerization and the sol–gel process

Acrylic polymer/silica hybrids were prepared by emulsifier‐free emulsion polymerization and the sol–gel process. Acrylic polymer emulsions containing triethoxysilyl groups were synthesized by emulsifier‐free batch emulsion polymerization. The acrylic polymer/silica hybrid films prepared from the acrylic polymer emulsions and tetraethoxysilane (TEOS) were transparent and solvent‐resistant. Atomic force microscopy studies of the hybrid film surface suggested that the hybrid films did not contain large (e.g., micrometer‐size) silica particles, which could be formed because of the organic–inorganic phase separation. The Si? O? Si bond formed by the cocondensation of TEOS and the triethoxysilyl groups on the acrylic polymer increased the miscibility between the acrylic polymer component and the silica component in the hybrid films, in which the nanometer‐size silica domains (particles) were dispersed homogeneously in the acrylic polymer component. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 273–280, 2006     

Acrylic polymer/silica organic–inorganic hybrid emulsions for coating materials: Role of the silane coupling agent

Acrylic polymer/silica organic–inorganic hybrid emulsions were synthesized by a simple method, that is, a conventional emulsion polymerization and subsequent sol–gel process, to provide water‐based coating materials. The acrylic polymer emulsions contained a silane coupling agent monomer, such as methacryloxypropyltriethoxysilane, to form highly solvent‐resistant hybrid films. On the other hand, the hybrid films from the surface‐modified polymer emulsions, in which the silane coupling agent was located only on the surface of the polymer particles and the particle core was not crosslinked, did not exhibit high solvent resistance. A honeycomblike array structure, which was derived from the polymer particles (diameter ≈ 50 nm) and the silica domain, on the hybrid film surfaces was observed by atomic force microscopy. The crosslinked core part and silane coupling agent containing the shell part of the polymer particles played important roles in attaining high solvent resistance. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4736–4742, 2006     

硅胶基质高效液相色谱填料研究进展

高效液相色谱(HPLC)不仅是一种有效的分析分离手段,也是一种重要的高效制备分离技术。色谱柱是HPLC系统的核心,不同性能的填料是HPLC广泛应用的基础。硅胶是开发最早、研究最为深入、应用最为广泛的HPLC固定相基质,其制备方法主要有喷雾干燥法、溶胶-凝胶法、聚合诱导胶体凝聚法及模板法等。近年来,亚2μm小粒径硅胶、核-壳型硅胶、双孔径硅胶、介孔性硅胶、有机杂化硅胶等新型硅胶应用于HPLC并取得了色谱分离技术的飞速发展,例如基于亚2μm填料的超高压液相色谱技术、基于核-壳型填料的快速分离技术、基于杂化硅胶填料的高温液相色谱技术等。硅胶经表面化学键合、聚合物包覆等有机改性可制得先进的大分子限进填料、温敏性填料、手性填料等,大大扩展了HPLC的应用范围。本文对液相色谱用硅胶的制备方法、改性与修饰方法以及硅胶基质固定相的评价方法加以系统综述,概述了新型硅胶在HPLC中的应用进展,并对硅胶基质填料的发展方向与应用前景进行了展望。     

Preparation and characterization of monodisperse porous silica microspheres with controllable morphology and structure

A novel method for the preparation of monodisperse porous silica microspheres with controllable morphology and structure is reported. The starting porous polymer microspheres were first functionalized with ethylenediamine (EDA) to generate amino groups. Subsequently, silica nanoparticles were deposited in the porous polymer microsphere to form polymer/silica hybrid microspheres via a modified sol‐gel process in the presence of tetra‐n‐butylammonium bromide (TBAB) or tetramethyl ammonium hydroxide (TMAH). Upon calcination of the polymer/silica hybrid microspheres, the porous silica microspheres were obtained. The morphology, inner structure, and properties of the porous silica microspheres were studied by field emission scanning electron microscope, Fourier transform infrared spectroscopy, thermogravimetric analysis, and mercury intrusion method. The results show that the presence of TBAB or TMAH in the process not only prevents the agglomeration of the hybrid microspheres, but also governs the controllable morphology from a porous inner structure to a hollow‐cage structure. The obtained porous silica microspheres exhibit no shrinkage from the polymer microspheres with a yield of around 98%. These porous silica microspheres have potential applications in the fields of chromatography, catalyst, and biology. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Effect of monomer structures and preparation methods on the morphology and properties of UV cured organic–inorganic hybrid films

The effects of preparation methods and monomer chemical structures on the microstructure, morphology, and properties of the hybrid films were studied. 7DBPA‐3S was synthesized by the sol–gel reaction of precondensed silica particles with alkoxysilane‐modified polymers DBPA. DBP‐POBG3T3 was prepared by the radiation curing of comb‐like UV curable alkoxysilanes POBG3T3 with UV curable polymer DBP, followed by the sol–gel reaction of alkoxysilanes. The DBP‐POBG3T3 film consisted of polymer matrix and large tethered aggregates with tiny silica connected by organic chains. On the contrary, silica nanoparticles were well‐dispersed in the 7DBPA‐3S hybrid film. The TEM, energy dispersive X‐ray Si‐mapping and P‐mapping images are good experimental approaches to characterize the texture of the tethered aggregates. The 7DBPA‐3S hybrid composite with well‐dispersed silica nanoparticles exhibited smoother surface, higher transparency, and better thermal stability than the DBP‐POBG3T3 composite did. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1152–1165, 2007     

Synthesis and characterization of UV‐curable phosphorus containing hybrid materials prepared by sol–gel technique

In this study, a series of ultraviolet (UV)‐curable organic–inorganic hybrid coating materials containing phosphorus were prepared by sol–gel approach from acrylate end‐capped urethane resin, acrylated phenyl phosphine oxide oligomer (APPO), and inorganic precursors. TEOS and MAPTMS were used to obtain the silica network and Ti:acac complex was employed for the formation of the titania network in the hybrid coating systems. Coating performance of the hybrid coating materials applied on aluminum substrates was determined by the analysis techniques, such as hardness, gloss, impact strength, cross‐cut adhesion, taber abrasion resistance, which were accepted by international organization. Also, stress–strain test of the hybrids was carried out on the free films. These measurements showed that all the properties of the hybrids were enhanced effectively by gradual increase in sol–gel precursors and APPO oligomer content. The thermal behavior of the hybrid coatings was investigated by thermogravimetric analysis (TGA) analysis. The flame retardancy of the hybrid materials was examined by the limiting oxygen index (LOI); the LOI values of pure organic coating (BF) increased from 31 to 44 for the hybrid materials containing phosphorus (BF‐P:40/Si:10). The data from thermal analysis and LOI showed that the hybrid coating materials containing phosphorus have higher thermal stability and flame resistance properties than the organic polymer. Besides that, it was found that the double bond conversion values for the hybrid mixtures were adequate in order to form an organic matrix. The polycondensation reactions of TEOS and MAPTMS compounds were also investigated by ²⁹Si‐NMR spectroscopy. SEM studies of the hybrid coatings showed that silica/titania particles were homogenously dispersed through the organic matrix. In addition, it was determined that the hybrid material containing phosphorus and silica showed fibrillar structure. Copyright © 2009 John Wiley & Sons, Ltd.     

OXIDATION OF HYDROCARBONS UNDER THE MILD CONDITIONS

The oxidation of organic substrates leads to the production of many functionalised molecules which are of great commercial and synthetic importance. The conventional mode of oxidation which involves stoichiometric ammount of Cr or Mn salts has been staked out because of the environmental hazadrous process. The transition to cleaner, safer, and more efficient plants is a new paradigm in the synthetic organic chemistry. Nowadays, hydrogen peroxide and oxygen as oxidizing agents were extreamely valuable and attractive. It is increasingly recognized, when polymers are used as supports for catalysts or organic reagents, the reactivity and selectivity of the supported catalysts or reagents may be seriously changed by so-called "polymer effects". As metal catalyzed oxidation of organic substrates with oxygen, we arc planing the incorporation of transition metals into polymer. In oxidaton organic compound has little resistant, so syntheses of organic-inorganic hybrid polymer from silica gel and montmorillonite by the modification with silane coupling reagents and the complexation of transition metal ions into hybrid polymer obtained above were investigated.     

Preparation of a Star Network PEG-based Gel Polymer Electrolyte and Its Application to Electrochromic Devices

A star network polymer with a pentaerythritol core linking four PEG-block polymeric arms was synthesized, and its corresponding gel polymer electrolyte based on lithium perchlorate and plasticizers EC/PC with the character being colorless and highly transparent has been also prepared. The polymer host was characterized and confirmed to be of a star network and an amorphous structure by FTIR, ^1H NMR and XRD studies. The polymer host hold good mechanical properties for pentaerythritol cross-linking. Maximum ionic conductivity of the prepared polymer electrolyte has reached 8.83 × 10 ^-4 S·cm^-1 at room temperature. Thermogravimetry （TG） of the polymer electrolyte showed that the thermal stability was up to at least 150 ℃. The gel polymer electrolyte was further evaluated in electrochromic devices fabricated by transparent PET-ITO and electrochromically active viologen derivative films, and its excellent performance promised the usage of the gel polymer electrolyte as ionic conductor material in electrochrornic devices.     

Fabrication and characterization of superhydrophobic silica nanotrees

Superhydrophobic silica nanotrees were obtained by sol–gel method with hybrid silica sol and jelly-like resorcinol formaldehyde resin. Rough surfaces were obtained by removing the organic polymer at high temperature. After the films with rough surface were modified by trimethylchlorosilane (TMCS), the wettability of the film changed from superhydrophilic to superhydrophobic. The surface roughness of the silica nanotrees film is about 20 nm, and it is transparent and superhydrophobic with a water contact angle higher than 150°.     

DETERMINATION OF THE DEGREE OF BONDED PHASE ON THE SURFACE OF SILICA GEL BY XPS

Attention is being increasingly paid to the new material prepared by bonding organic molecules on the surface of silica gel in the preparation of catalyst or packing material for liquid chrotnatographic column.There has not been a quantitative method for determination or characterizing the degree of bonded phase on surface of silica gel yet.This paper provides a new semi-quantitative method.     

A novel polymer gel electrolyte: Direct polymerization of ionic liquid from surface of silica nanoparticles

A novel polymer electrolyte is synthesized by directly grafting poly ionic liquids onto silica nanoparticles. The kinetic study of this surface‐initiated polymerization has also been included. A gel‐state electrolyte is formed by mixing this type of polymer/silica nanocomposite with ionic liquids under 60 °C, which exhibits an excellent conductivity of 0.8 mS/cm at room temperature and 14.7 mS/cm at 90 °C. In addition, the mechanism of gel formation has also been discussed in this article. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 121–127     

Synthesis of UV‐cured acrylic–silica hybrid nanocomposites from dendritic acrylic oligomer and acrylic‐functionalized silica

An acrylic–silica hybrid polymeric nanocomposite, comprising well‐distributed silica nanoparticles in acrylic matrix, has been synthesized at a markedly rapid rate from a dendritic acrylic oligomer (DAO) and an acrylic‐functionalized silica (A‐silica) via UV‐curing. A‐silica was made by functioning colloidal silica nanoparticles with 3‐methacryloxypropyltrimethoxysilane (MATMS) and DAO was formed by reacting 1,5‐diamino‐2‐methylpentane (MPMDA) with trimethylopropane triacrylate (TMPTA). The MATMS has been found either doubly or singly bonded to silica nanoparticles but not triply bonded, and the inclusion of MATMS into the siloxane network structure increases the size of silica nanoparticles. The well distribution of A‐silica and its good compatibility with DAO cause an increase in T_d of the acrylic–silica hybrid material. Silica nanoparticles are too small to cause any significant light scattering, and do not have deleterious effects on transparency. The “hybrid‐on‐polyethylene terephathalate” films exhibited satisfactory hardness and surface roughness because of silica nanoparticles. The preparation as well as the characterization of the constituting species and the final hybrid material are described in detail. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 8149–8158, 2008     

Polycaprolactone membranes reinforced by toughened sol–gel produced silica networks

The aim of this work is to develop polycaprolactone based porous materials with improved mechanical performance to be used in bone repair. The hybrid membranes consist in a polymeric porous material in which the pore walls are coated by a silica thin layer. Silica coating increases membrane stiffness with respect to pure polymer but in addition filling the pores of the polymer with a silica phase improves bioactivity due to the delivery of silica ions in the neighborhood of the material in vivo. Nevertheless silica network, even that produced by sol–gel, might be too stiff and brittle what is not desirable for its performance as a coating. In this work we produced a toughened silica coating adding chitosan and 3-glycidoxypropyltrimethoxysilane (GPTMS) to the precursor solution looking for having polymer chains linked by covalent bonding to the silica network. Hybrid polymer–silica coating was produced by in situ sol–gel reaction using Tetraethyl orthosilicate (TEOS), GPTMS and chitosan. Chemical reaction between amine groups of chitosan chains and epoxy groups of GPTMS allowed covalent bonding of polymer chains to the silica network. Physical properties of the hybrid membranes were characterized and cell attachment of MC3T3-E1 pre-osteoblastic cells on the surface of these supports was assessed.     

Preparation of polypropylene/silica composites by in-situ sol–gel processing using hyperbranched polyethoxysiloxane

Based on a volatile-free silica liquid precursor polymer—hyperbranched polyethoxysiloxane (PEOS), an industrial compatible in situ sol–gel process for the preparation of polymer/silica nanocomposites has been developed. It has been shown that in the presence of a catalyst water vapor induced a fast conversion of liquid PEOS to solid silica in polypropylene (PP) melt in a twin-screw microcompounder. Solid state NMR showed that the in situ conversion of PEOS proceeded to a large extent. With small amounts of PEOS this procedure yielded PP/silica composites with particle size less than 100 nm. The particle size increased with the PEOS amount blended with PP. Nevertheless, the particles were observed to be homogeneously dispersed within the polymer matrix. PP/silica composites prepared by in situ sol–gel technology showed improved thermal properties, but almost not affected mechanical properties in comparison with pure PP.