DEA与SDS/n-C5H11OH/H2O微乳液的相互作用

以循环伏安法研究了N,N-二乙基苯胺（DEA）与十二烷基硫酸钠（SDS）/正戊醇（n-C5H11OH）/H2O体系O/W和W/O结构微乳液的相互作用.结果表明,DEA在SDS/n-C5H11OH/H2O体系微乳液中有两种定位方式:其一,DEA分子在微乳液液滴膜相中定位于表面活性剂和助表面活性剂的极性基团附近;其二,DEA分子在微乳液液滴膜相中定位于表面活性剂疏水基团一侧.两种定位的分布与微乳液的结构和组成相关.     

Solubilization and phase equilibria of water-in-oil microemulsions : II. Effects of alcohols, oils, and salinity on single-chain surfactant systems

The solubilization and phase equilibria of w/o microemulsions have been shown to be dependent on two phenomenological parameters, namely the spontaneous curvature and elasticity of the interfacial film, when interfacial tension is very low. The spontaneous curvature of an interface is basically determined by the geometric packing of surfactant and cosurfactant molecules at the interface, whereas the interfacial elasticity is related to the energy required to bend the interface. The droplet size and solubilization of microemulsions is mainly determined by the radius of spontaneous curvature, and is further influenced by interfacial elasticity and interdroplet interactions. A w/o microemulsion with a highly curved and relatively rigid interfacial film can exist in equilibrium with excess water at the solubilization limit due to the interfacial bending stress. Increasing the natural radius and fluidity of the interface can increase the droplet size and hence the solubilization in the microemulsion. On the other hand, a w/o microemulsion with a highly fluid interfacial film can exist in equilibrium with an excess oil phase containing a low density of microemulsion droplets due to attractive interdroplet interaction. Increasing the interfacial rigidity and decreasing the natural radius in this case can increase water solubilization in the microemulsion by retarding the phase separation process. Thus, a maximum water solubilization in a w/o microemulsion can be obtained by minimizing both the interfacial bending stress of rigid interfaces and the attractive interdroplet interaction of fluid interfaces at an optimal interfacial curvature and elasticity. The study of phase equilibria of microemulsions can serve as a simple method to evaluate the property of the interface and provide phenomenological guidance for the formulation of microemulsions with maximum solubilization capacity.     

Covalently closed microemulsions in presence of triblock terpolymers

This paper is focused on the influence of polystyrene (PS)-poly(1,4-butadiene) (PB)-poly(ethylene oxide) (PEO) triblock terpolymers on the w/o microemulsion of the pseudo-ternary system water/sodium dodecylsulfate (SDS)/xylene-pentanol. Despite the insolubility of the copolymer in water as well as in the xylene-pentanol mixture, it can be incorporated into the w/o microemulsion and interactions between the triblock terpolymer molecules and the anionic surfactant headgroups can be detected by differential scanning calorimetry (DSC) measurements. Furthermore, dynamic light scattering measurements were used to determine the aggregate diameter of the modified microemulsions. For lower polymer concentrations large aggregates between 100 and 500 nm can be observed. Surprisingly, at a higher terpolymer concentration of 5 wt%, significant smaller aggregate diameters can be identified by dynamic light scattering and Cryo-SEM. One can conclude that the copolymers are incorporated in the inverse microemulsion droplets, where the PB blocks cover the water droplets. The thermally induced radical cross-linking of the butadiene units in the presence of azobisisobutyronitrile (AIBN) leads then to covalently closed nanocapsules with an average size of 10 nm.     

Nonionic Microemulsion: Mechanism of Formation and Percolation

A series of microemulsions, both W/O and O/W, based on nonionic surfactants of the form (NP(EO)_n), were prepared using the titration method. Mixing a constant weight of surfactant with a constant volume of the dispersed phase and an initial volume of continuous phase produces an emulsion, which is titrated to clarity with another surfactant (cosurfactant). Plotting (a) the volume of cosurfactant necessary to transform an emulsion into a microemulsion containing a fixed volume of dispersed phase and constant weight of surfactant versus (b) different initial continuous-phase volumes yields a straight line. Extrapolating from experimentally determined values for the cosurfactant volume to the value corresponding to a zero-volume continuous phase allows the determination of the surfactant molar composition and the average number of ethylene oxides (EO) per nonylphenol adsorbed at the interface. Using a surfactant with the same number of ethylene oxides yields a single-surfactant microemulsion. Measurement of surfactants transmittance in the oil and water phases demonstrates that microemulsification occurs when the surfactant interfacial film is equally soluble in the two phases. Surface pressure measurements reveal that oil penetration impedes formation of O/W microemulsions with n-tetradecane or n-hexadecane as dispersed phase. Conductance, particle size, and transmittance measurements show that above a certain dispersed-phase volume percolation of the microemulsion occurs.     

Background and operating parameters in microemulsion electrokinetic chromatography

Microemulsion electrokinetic chromatography (MEEKC) is an electrodriven separation technique. Separations are generally achieved using microemulsions consisting of surfactant-coated nanometer-sized oil droplets suspended in aqueous buffer. A cosurfactant such as a short-chain alcohol is generally used to stabilize the microemulsion. This review summarizes the various microemulsion types and compositions that have been used in MEEKC. The effects of key-operating variables such as surfactant type and concentration, cosurfactant type and concentration, buffer pH and type, oil type and concentration, use of organic solvent and cyclodextrin additions, and temperature are described. Specific examples of water-in-oil microemulsions and chirally selective separations are also covered.     

Growth of silica nanoparticles in methylmethacrylate-based water-in-oil microemulsions

The mechanism of silica particle formation in monomer microemulsions is studied using dynamic light scattering (DLS), atomic force microscopy, small-angle X-ray scattering (SAXS), and conductivity measurements. The hydrolysis of tetraethylorthosilicate (TEOS) in methylmethacrylate (MMA) microemulsions (MMA = methylmethacrylate) is compared with the formation of SiO₂ particles in heptane microemulsions. Stable microemulsions without cosurfactant were found for MMA, the nonionic surfactant Marlophen NP10, and aqueous ammonia (0.75 wt%). In the one-phase region of the ternary phase diagram, the water/surfactant ratio (R _w) could be varied from 6 to 18. The DLS and SAXS measurements show that reverse micelles form in these water-in-oil (w/o) microemulsions. The minimum water-to-surfactant molar ratio required for micelle formation was determined. Particle formation is achieved from the base-catalyzed hydrolysis of TEOS. According to atomic force microscopy measurements of particles isolated from the emulsion, the particle size can be effectively tailored in between 20 and 60 nm by varying R _w from 2–6 in heptane w/o microemulsions. For MMA-based microemulsions, the particle diameter ranges from 25 to 50 nm, but the polydispersity is higher. Tailoring of the particle size is not achieved with R _w, but adjusting the particle growth period produces particles between 10 and 70 nm.     

阴离子型微乳液的电导行为及其溶液结构

根据电导测量,研究了属于W/O→双连续→O/W一类微乳液的十二烷基硫酸钠(SDS)/正丁醇/辛烷/水体系的溶液结构.并探讨了表面活性剂离子对微乳液导电行为的贡献,以及表面活性剂与助表面活性剂含量、油含量对微乳液溶液结构的影响.微乳液的导电行为在W/O子区域中主要是由于SDS阴离子和在O/W子区域中是由于Na离子的影响.在双连续区(IZ)中SDS阴离子和Na阳离子都能影响导电行为增加表面活性剂含量有助于形成O/W微乳液,而助表面活性剂和油含量都增加有助于于形成W/O微乳液.     

Tween80/BmimPF6/醇/甲苯体系的相行为

以环境友好型的Tween80为表面活性剂, 以醇(乙醇、正丁醇、正己醇、正辛醇、正癸醇和异戊醇)为助表面活性剂, 对离子液体1-丁基-3-甲基咪唑六氟磷酸盐(bmimPF6)和甲苯进行了微乳化实验, 绘制了不同条件下Tween80离子液体的微乳体系的拟三元相图, 考察了醇的种类、含量对单相微乳区的影响, 并用电导法研究了在乙醇为助表面活性剂情况下, 单相微乳区的结构转变. 结果表明, 当醇(异戊醇)固定时, 随着表面活性剂/醇的质量比增加, 单相微乳区的面积逐渐增大; 不同链长的直链醇对单相微乳区的面积影响与该醇在离子液体中的溶解情况有关, 单相微乳区的面积随着直链醇链长的增加而越小; 当乙醇作助表面活性剂时, 所得到的单相微乳区的面积最大, 且单相微乳区存在着O/IL(oil-in-ionic liquid)、双连续相和IL/O(ionic liquid-in-oil)三种微结构. 尤其对离子液体微乳体系的电导随油的含量的增加而最初增大的现象进行了解释, 这一现象是由于油主要起到减少离子液体中离子对或离子的积聚, 提高带电离子淌度的作用.     

油酸单乙醇酰胺聚氧乙烯醚微乳液体系的研究

以油酸单乙醇酰胺聚氧乙烯醚作为乳化剂制备水包油型微乳液.通过拟三元相图、粒径大小及粒径分布确定较优配方:复配表面活性剂(由油酸单乙醇酰胺聚氧乙烯醚和吐温20组成)的亲水亲油平衡值(HLB值)为15,助表面活性剂为正丁醇,复配表面活性剂与助表面活性剂的质量比(Km值)为1,混合表面活性剂与正辛烷的质量比(S/O值)=1∶...     

Recent advances in microemulsion electrokinetic chromatography

Microemulsion electrokinetic chromatography (MEEKC) is an electrodriven separation technique. Separations are typically achieved using oil-in-water microemulsions, which are composed of nanometre-sized droplets of oil suspended in aqueous buffer. The oil droplets are coated in surfactant molecules and the system is stabilised by the addition of a short-chain alcohol cosurfactant. The novel use of water-in-oil microemulsions for MEEKC separations has also been investigated recently. This report summarises the different microemulsion types and compositions used to-date and their applications with a focus on recent papers (2002-2004). The effects of key operating variables (pH, surfactant, cosurfactant, oil phase, buffer, additives, temperature, organic modifier) and methodology techniques are described.     

Fluorescence correlation spectroscopy of water-in-oil microemulsions: an application in specific characterisation of droplets containing biomolecules

Fluorescence correlation spectroscopy (FCS) has been successfully used to characterise water-in-oil (w/o) microemulsions. The investigated systems were stabilised by sodium bis-2-ethylhexyl sulphosuccinate (AOT) and the measured diffusion times have been related to the radii of the aggregated species, which for some systems, were separately determined by small-angle neutron scattering (SANS). We demonstrate that FCS is capable of measuring hydrodynamic radii of microemulsions rapidly and at surfactant concentrations lower than previously reported for other techniques. FCS was also used to specifically interrogate microemulsion droplets containing a fluorescently-labelled biomolecule, specifically phalloidin, a peptide fungal toxin from Amanita phalloides, and the enzyme -chymotrypsin (-CT). The microemulsion droplets are only marginally increased in size if a small peptide (phalloidin) is included in the water phase, whereas the droplet size is significantly increased when a larger protein (-CT) is included.     

Physicochemical studies on cetylammonium bromide and its modified (mono-, di-, and trihydroxyethylated) head group analogues. Their micellization characteristics in water and thermodynamic and structural aspects of water-in-oil microemulsions formed with them along with n-hexanol and isooctane

The micellization behavior of cetylammonium bromide and its mono-, di-, and trihydroxyethylated head group analogues and water/oil (w/o) microemulsion formation with them have been studied with detailed thermodynamic and structural considerations. The critical micellar concentration, micellar aggregation number, and behavior of the surfactants at the air/solution interface have been studied in detail. The results have been analyzed and discussed. The formation of the w/o microemulsion stabilized by the aforesaid surfactants in conjunction with the cosurfactant n-hexanol in isooctane has been investigated by the dilution method. The energetics of the transfer of cosurfactant from oil to the interface has been estimated. The structural parameters, namely, droplet dimension, droplet number, and population of surfactant and cosurfactant on the droplet surface, have also been estimated. The efficacy of the surfactants in respect to water dispersion in oil and cosurfactant concentration level at the oil/water interface has been worked out. Such microemulsions are prospective compartmentalized systems to assist enzyme activities. In this respect, the trihydroxyethylated head group analogue in the above series has been found to be a better performer for the preparation and stabilization of microemulsions that has correlated well with its performance than the others in the hydrolysis of p-nitrophenyl-n-hexanoate by the enzyme Chromobacterium viscosum lipase.     

AOT/H2O/油微乳液体系的浊度、密度和微观结构

建立了通过精密测量密度、折射率和浊度研究微乳液滴微观性质的方法,获得水与表面活性剂的摩尔比r分别为10.5和12的AOT/H2O/甲苯微乳液体系液滴的微观结构及相互作用参数,得到AOT分子的长度L=1.07 nm,用液滴间的相互作用讨论了相变温度与r的关系.用L=1.07 nm,通过密度测量得到AOT/H2O/甲苯和AOT/H2O/环己烷两个微乳液体系不同r值下液滴的微观结构参数,与文献报导的数据吻合得很好.发现在微乳液滴中的水的密度明显大于自由水的密度,并随溶剂变化,而AOT分子的构型不变.     

AOT/H_2O/油微乳液体系的浊度、密度和微观结构

建立了通过精密测量密度、折射率和浊度研究微乳液滴微观性质的方法,获得水与表面活性剂的摩尔比r分别为10.5和12的AOT/H2O/甲苯微乳液体系液滴的微观结构及相互作用参数,得到AOT分子的长度L=1.07nm,用液滴间的相互作用讨论了相变温度与r的关系.用L=1.07nm,通过密度测量得到AOT/H2O/甲苯和AOT/H2O/环己烷两个微乳液体系不同r值下液滴的微观结构参数,与文献报导的数据吻合得很好.发现在微乳液滴中的水的密度明显大于自由水的密度,并随溶剂变化,而AOT分子的构型不变.     

Structural and spectroscopic investigation of ZnS nanoparticles grown in quaternary reverse micelles

ZnS nanoparticles were synthesized in four component "water in oil" microemulsions formed by a cationic surfactant (cetyltrimethylammonium bromide, CTAB), a cosurfactant (pentanol or butanol), n-hexane and water. The effect of various parameters (nature of cosurfactant, water/surfactant W(0), and alcohol/surfactant P(0)) on the formation and stability of ZnS nanoparticles was investigated thoroughly. UV-Vis spectroscopy was employed to directly follow the formation of ZnS systems in the microemulsions. Thus, particle size was estimated from the position of the first excitonic transition by employing an approximate finite-depth equation and an empirical correlation, giving average diameters in the ranges 2.3-2.5 and 3.0-3.5nm, respectively. Stable ZnS nanoparticles were obtained by employing low water and high cosurfactant amounts. This suggests that at high concentration the cosurfactant molecules act as capping agents on the surface of the inverse micelles, while low water amounts are needful to obtain water droplets with a radius close to that of the interfacial film spontaneous curvature. HRTEM analysis showed that the samples are formed by a few crystalline ZnS nanoparticles of spherical shape, embedded in and amorphous organic matrix, with a coherent scattering domain between 2 and 4nm.     

Fluorinated ionic surfactant microemulsions in hydrofluorocarbon 134a (HFC 134a)

The factors influencing the formation of water-in-134a-propellant microemulsions using the fluorinated ionic surfactants ammonium perfluorooctanoate, ammonium perfluoroheptanoate, and sodium perfluorooctanoate has been determined. None of the fluorinated ionic surfactants could be used to prepare clear, one-phase systems when used as sole surfactant, but they could be when combined with a short-chain fluoro- or hydrocarbon alcohol in surfactant:cosurfactant weight-mixing ratios (K(m)) in the range 1:2 to 2:1. When hydrocarbon alcohols were used this clear region extended over a wide range of compositions and was confirmed by means of photon correlation spectroscopy (PCS) to contain microemulsion droplets in the propellant-rich part of the phase diagram. PCS studies performed in the presence of the water-soluble drug terbutaline sulfate showed that it was possible to solubilize the drug within water-in-propellant microemulsion droplets. These studies confirm for the first time that it is possible to prepare water-in-propellant 134a microemulsions using fluorinated ionic surfactants and to solubilize water-soluble drugs within these systems.     

Release of nortriptyline hydrochloride from oil-water microemulsions

The release of nortritptyline hydrochloride from oil-in-water (o/w) microemulsions (isopropyl myristate as oil, propylene glycol as cosurfactant, polysorbate 80 as surfactant and phosphate buffer, pH 7.4, as the continuous phase) containing increasing concentrations of polyethylene glycol 400, used to facilitate the diffusion of a drug from the inner oily phase of the microemulsion to the outer aqueous phase of such a dispersion system, was studied by determining the permeability constants of the drug through hydrophilic and lipophilic membranes separating the o/w microemulsions from the receiving aqueous phase (phosphate buffer pH 7.4). The permeability of nortriptyline hydrochloride from microemulsions through the lipophilic membrane increased as the concentration of polyethylene glycol 400 in the disperse system increased. The apparent permeability constant for nortriptyline hydrochloride, from the microemulsion without polyethylene glycol, was 1.36 x 10(-3) cm x h(-1), it increased up to 7.80 x 10(-3) cm x h(-1) in the presence of polyethylene glycol at a concentration of 50% (v/v) of the initial volume of the aqueous phase.     

NMR and SANS studies of aggregation and microemulsion formation by phosphorus fluorosurfactants in liquid and supercritical carbon dioxide

(1)H NMR relaxation and diffusion studies were performed on water-in-CO(2) (W/C) microemulsion systems formed with phosphorus fluorosurfactants of bis[2-(F-hexyl)ethyl] phosphate salts (DiF(8)), having different counterions (Na(+), NH(4)(+), N(CH(3))(4)(+)) by means of high-pressure in situ NMR. Water has a low solubility in CO(2) and is mainly solubilized by the microemulsion droplets formed with surfactants added to CO(2) and water mixtures. There is rapid exchange of water between the bulk CO(2) and the microemulsion droplets; however, NMR relaxation measurements show that the entrapped water has restricted motion, and there is little "free" water in the core. Counterions entrapped by the droplets are mostly associated with the surfactant headgroups: diffusion measurements show that counterions and the surfactant molecules move together with a diffusion coefficient that is associated with the droplet. The outer shell of the microemulsion droplets consists of the surfactant tails with some associated CO(2). For W/C microemulsions formed with the phosphate-based surfactant having the ammonia counterion (A-DiF(8)), the (1)H NMR signal for NH(4)(+) shows a much larger diffusion coefficient than that of the surfactant tails. This apparent paradox is explained on the basis of proton exchange between water and the ammonium ion. The observed dependence of the relaxation time (T(2)) on W(0) (mole ratio of water to surfactant in the droplets) for water and NH(4)(+) can also be explained by this exchange model. The average hydrodynamic radius of A-DiF(8) microemulsion droplets estimated from NMR diffusion measurements (25 degrees C, 206 bar, W(0) = 5) was R(h) = 2.0 nm. Assuming the theoretical ratio of R(g)/R(h) = 0.775 for a solid sphere, where R(g) is the radius of gyration, the equivalent hydrodynamic radius from SANS is R(h) = 1.87 nm. The radii measured by the two techniques are in reasonable agreement, as the two techniques are weighted to measure somewhat different parts of the micelle structure.     

The effect of changing the microstructure of a microemulsion on chemical reactivity

A kinetic study was carried out on various solvolytic reactions in water/ NH4OT /isooctane microemulsions. The NH4OT surfactant is a derivative of the sodium salt of bis(2-ethylhexyl) sulfosuccinate (NaOT or AOT), where the Na+ counterion has been replaced by NH4+. The counterion substitution effects the phase diagram of the system, and therefore, NH4OT-based microemulsions with high water content reaching values of W = 350 (W = [H2O]/[NH4OT]) can be obtained. The presence of high W values suggests a transition in the microemulsion microstructure from water-in-oil (w/o) to oil-in-water (o/w), as was confirmed by conductivity and 1H NMR self-diffusion measurements. The interpretation of the kinetic studies in terms of pseudophase formalism allows us to analyze the effect of the microemulsion on chemical reactivity, regardless of its microstructure. It has been confirmed that the values of the solvolytic rate constants at the interphase of oil-in-water microemulsions are similar to those obtained for aqueous SDS systems, showing that the hydration degree of the interphase of the oil-in-water microemulsions is independent of W. The influence of the surfactant counterion on the solvolytic rate constants was analyzed by comparing HOT-, NaOT-, and NH4OT-based microemulsions. An important influence on the rate constants caused by the changes in the structural properties of water has been observed as was confirmed by the water 1H NMR signals.     

Some selected problems of nonaqueous microemulsions — phase diagrams and variation of the composition in the quaternary and ternary systems

A variety of quaternary and ternary systems of the type of dodecane/aliphatic alcohols/Na-dodecyl sulphate/water or a water-replacing component (formamide, ethylene glycol, propylene glycol, propylene carbonate, dimethylsulfoxide, acetonitrile) were subjected to a comparative analysis of microemulsification. The compositions of the systems of the type of oil/surfactant/cosurfactant/water or nonaqueous liquid were changed with respect to surfactant (Na-dodecyl sulfate and triton X 114) concentration, cosurfactant (homologous aliphatic alcohols) concentration and mixing ratio of water and water-replacing component. The appertaining phase diagrams were plotted and compared with those of aqueous systems.The experimental results suggest that the phase regions, which are designated as nonaqueous microemulsions, probably represent, not only microemulsions in the usual sense, but a separate kind of mixed phase whose microstructure is examined by special studies. Analogously to aqueous microemulsion systems, transparency and spontaneous formation of homogeneous multicomponent systems cannot serve as the sole criteria for waterless microemulsion formation. But they are important guiding properties of microemulsion formation in multicomponent systems.The variety of components involved in the chemical composition and the current insufficient knowledge do not permit to generally decide whether nonaqueous systems can be assigned to microemulsions or to molecular solutions. For clarifying this problem a detailed examination of the miscibility behavior, especially that of binary systems as a function of temperature, and the role that surfactant and cosurfactant play in the formation of homogeneous systems will be necessary.