Thermodegradation of poly(4-vinylpyridine-co-crotonic acid-co-divinylbenzene) and N-oxide derivatives

Copolymer networks based on 4-vinylpyridine (4VPy)/crotonic acid (CrA)/divinylbenzene (DVB) and their N-oxide derivatives have been investigated by thermogravimetric analysis (TG) to evaluate their thermal stability in nitrogen atmosphere at fixed heating rate. Thermal stability was determined from TG curves to investigate the influence of 4VPy content and introduction of N-oxide groups. The TG and DTG curves of unmodified copolymers clearly show two thermodegradation stage and the same kinetic pathway. The decomposition temperatures do not depend on the 4VPy content. The copolymers modified by oxidation present lower thermostability than unmodified showing that the introduction of N-oxide groups modifies their kinetic pathways. A kinetic model Ozawa was used to determine the kinetic parameters. The apparent thermal decomposition activation energies (ΔE_d) of the unmodified copolymer under nitrogen was higher than that in modified copolymer. Also, the characterizations of copolymer networks were done by Fourier transform infrared spectroscopy (FTIR).     

Thermal degradation of copolymers of styrene with dicarboxylic acids - II: Copolymers obtained by radical copolymerisation of styrene with maleic acid or fumaric acid

Thermal degradation processes in copolymers of styrene with two stereoisomers of 1,2-ethylenedicarboxylic acids (i.e. maleic acid (the cis-isomer) and fumaric acid (the trans-isomer)) have been studied by mass spectrometry, FTIR and TG measurements. The influence of the chemical composition on thermal degradation of copolymers with acid by non-isothermal thermogravimetric analysis (TG) was also studied. The stereo-configuration of carboxyl groups in copolymers was analysed by potentiometric titration. It was found that copolymers degrade in two main complex stages. The initial step in the decomposition involves the formation of cyclic five-membered anhydrides. The presence of trans configuration of carboxyl groups hinders the formation of cyclic anhydrides and shifts the decomposition to higher temperatures, making decarboxylation competitive. At higher temperatures anhydride decomposition takes place and finally the degradation of main chains occurs.     

Synthesis and degradation profile of cast films of PPG-DMPA-IPDI aqueous polyurethane dispersions based on selective catalysts

Waterborne polyurethane (WBU) dispersions synthesized from poly(propylene glycol) (PPG), dimethylolpropionic acid (DMPA), and isophorone diisocyanate (IPDI) with catalysts of different selectivity were prepared via by the conventional prepolymer isocyanate process. Two types of chain extenders were used, ethylene glycol (EG) and propylene glycol (PG), producing polyurethanes. The dispersions were neutralized by the addition of triethylamine. The thermal stability of the materials, obtained as cast films prepared from aqueous dispersions was evaluated by thermogravimetry (TG). It was observed that initial degradation temperatures were above 140 °C, with two-step degradation profiles. The use of a more selective catalyst in the formulations led to materials with higher thermal stability. DTG curves exhibited stages not perceptible in the curves of weight loss, which were mainly influenced by the differences in the formulations. Thermal decomposition of the obtained polyurethanes was followed by TG coupled with FTIR spectroscopy.     

Thermal characterization of polymeric anion exchangers with a dendrimeric structure

The thermal properties of new anion exchangers prepared via the grafting process to polymeric particles having hydroxyl groups on their surface were evaluated by thermogravimetry and differential scanning calorimetry. The support microspheres were copolymers of 1,4-di(2-hydroxy-3-methacryloyloxypropoxy)benzene (1,4 DMH) and trimethylolpropane trimethacrylate (TRIM). They were coated with polymeric layers formed by condensation polymerization of primary amines with diepoxides. Synthesized copolymers of methylamine and 1,4-butanedioldiglycidyl ether have a dendrimer structure. By TG/FTIR/MS, it was observed that new dendrimeric materials exhibited one stage of mass loss with T _max1 400 °C, connected with degradation of organic layers. DSC and TG experiments showed that water molecules are absorbed on the materials surface. The synthesized anion exchangers exhibited good thermal stability, suitable for their use in chromatographic experiments carried out with higher temperatures.     

Quantitative analysis of biodegradable amphiphilic poly(L-lactide)-block-poly(ethyleneglycol)-blockpoly(L-lactide) by using TG, FTIR and NMR

The thermogravimetric analysis (TG) of two series of tri-block copolymers based on poly(L,L-lactide) (PLLA) and poly(ethyleneglycol) (PEG) segments, having molar mass of 4000 or 600 g mol^–1, respectively, is reported. The prepared block copolymers presented wide range of molecular masses (800 to 47500 g mol^–1) and compositions (16 to 80 mass% PEG). The thermal stability increased with the PLLA and/or PEG segment size and the tri-block copolymers prepared from PEG 4000 started to decompose at higher temperatures compared to those copolymers from PEG 600. The copolymers compositions were determined by thermogravimetric analysis and the results were compared to other traditional quantitative spectroscopic methods, hydrogen nuclear magnetic resonance spectrometry (¹HNMR) and Fourier transform infrared spectrometry (FTIR). The PEG 4000 copolymer compositions calculated by TG and by ¹HNMR, presented differences of 1%, demonstrating feasibility of using thermogravimetric analysis for quantitative purposes.     

较高等规度丙烯腈成纤聚合物的合成

以无水氯化镁为添加剂,考察了不同条件下的丙烯腈聚合反应,研究了溶剂种类、聚合温度和氯化镁与丙烯腈的摩尔配比对聚合反应及聚合物等规度的影响,并确定了最佳反应条件,正己烷为溶剂,偶氮二异丁腈(AIBN)为引发剂,聚合温度为60℃,氯化镁与丙烯腈的摩尔比为2∶1.在此条件下,研究了单体浓度和引发剂浓度对丙烯腈(AN)均聚合、丙烯腈/衣康酸(AN/IA)二元共聚合和丙烯腈/衣康酸/丙烯酸甲酯(AN/IA/MA)三元共聚合反应的影响,并获得了较高等规度(三单元组全同分数30.2%～55.9%)的丙烯腈均聚物和共聚物.不同等规度的丙烯腈聚合物的热分析(DSC及TGA)表明,随着聚合物等规度的提高,聚合物的环化放热峰值温度向高温区移动,而且随着聚合物等规度的提高,环化放热峰变宽.随着聚合物等规度的提高,聚合物的热稳定性变差,热失重增加,碳收率降低.     

MONOMER REACTIVITY RATIO AND THERMAL PERFORMANCE OF Α-METHYL STYRENE AND GLYCIDYL METHACRYLATE COPOLYMERS

Synthesis and characterization of the copolymers (PAG) of α-methyl styrene (AMS) and glycidyl methacrylate (GMA) are presented. The copolymers of PAG were characterized by gel permeation chromatography (GPC), Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance (1H-NMR) and thermogravimetery (TG). Based on the copolymer compositions determined by 1H-NMR, the reactivity ratios of AMS and GMA were found to be 0.105 ± 0.012 and 0.883 ± 0.046 respectively by Kelen-Tiidos method. TG revealed that thermal stability of the copolymers decreased with increasing the AMS content in the copolymers, which indicated that the degradation was mainly caused by the chain scission of AMS-containing structures. Under heating, the copolymers depolymerize at their weak bonds and form chain radicals, which could further initiate other chemical reactions.     

Preparation and characterization of poly(l,l-lactide)-b-poly(ethylene glycol)-b-poly(l,l-lactide) (PLLA-PEG-PLLA) microspheres having encapsulated tetracycline

Amphiphilic triblock copolymers, based on hydrophilic poly(ethylene glycol) (PEG) blocks and hydrophobic poly(l,l-lactide) (PLLA) blocks, were used as the matrix material for the preparation of tetracycline-loaded microspheres. The morphology and thermal properties of the biodegradable microspheres were evaluated. SEM showed the predominance of the spherical shape, however, it was possible to distinguish three patterns: rough or smooth surface or uneven collapsed volume. The FTIR analysis indicated good mechanical stability and structural integrity of the PLLA-PEG-PLLA copolymer??s microspheres enclosing tetracycline. By thermal analysis it was possible to see the marginal influence of tetracycline on the glass transition and melting temperatures of the PLLA-PEG-PLLA triblock copolymer, while the results by TG indicated the presence of tetracycline in the inner structure of the microspheres, which thermal decomposition leading to char formation was triggered by the drug??s presence.     

MONOMER REACTIVITY RATIO AND THERMAL PERFORMANCE OFα-METHYL STYRENE AND GLYCIDYL METHACRYLATE COPOLYMERS

<正>Synthesis and characterization of the copolymers(PAG) ofα-methyl styrene(AMS) and glycidyl methacrylate (GMA) are presented.The copolymers of PAG were characterized by gel permeation chromatography(GPC),Fourier transform infrared spectroscopy(FTIR),nuclear magnetic resonance(~1H-NMR) and thermogravimetery(TG).Based on the copolymer compositions determined by ~1H-NMR,the reactivity ratios of AMS and GMA were found to be 0.105±0.012 and 0.883±0.046 respectively by Kelen-Tüds method.TG revealed that thermal stability of the copolymers decreased with increasing the AMS content in the copolymers,which indicated that the degradation was mainly caused by the chain scission of AMS-containing structures.Under heating,the copolymers depolymerize at their weak bonds and form chain radicals, which could further initiate other chemical reactions.     

Irradiation‐induced grafting of acrylonitrile onto activated carbon fiber

Viscose‐based activated carbon fiber (VACF) was modified with acrylonitrile (AN) by γ‐irradiation‐induced grafting polymerization. Effects of the grafting conditions, such as concentrations of AN and divinylbenzene (DVB), pH value, and solvent on the grafting process were studied. The physicochemical properties of the fibers were characterized. The results show that AN can be effectively grafted onto the surface of VACF with the addition of DVB. The grafting yield is higher than 12% according to thermogravimetric (TG) analysis. The study shows that DVB can improve the grafting degree of AN in the form of grafting chains or agglomerate materials. After grafting modification, VACF shows a small decrease in the specific surface area. Copyright © 2009 John Wiley & Sons, Ltd.     

Study of some volatile compounds evolved from the thermal decomposition of atenolol

Simultaneous thermogravimetry–differential scanning calorimetry (TG–DSC) and coupled thermogravimetry–infrared spectroscopy (TG–FTIR) analyses were used to study the antihypertensive drug atenolol. The TG–DSC curves provided information concerning the thermal stability and decomposition profiles of the compound. From the TG–FTIR coupled techniques, it was possible to identify ammonia and isopropylamine as possible volatile compounds released during the thermal decomposition of the drug.     

Synthesis and Properties of pH and Temperature Responsive Copolymer with Pesudorotaxane Structure

pH and temperature responsive copolymers PNAM4VBCB of N-isopropyl acrylamide(NAM) and complex pseudorotaxane monomer N¹-(4-vinylbenzyl)-1,4-diaminobutane dihydrochloride with cucurbit[6]uril(CB[6]) threaded(4VBCB) were prepared via free-radical polymerization in aqueous solution. The copolymers were characterized by ¹H NMR, Fourier transform infrared(FTIR) spectrometry, elemental analysis, and static light scattering. The thermodynamic properties of the copolymers were studied by thermogravimetric analysis(TGA), and the effects of pH and the concentration of the copolymer on the average hydrodynamic radius(R_h) were studied by dynamic light scattering(DLS). In addition, the thermal sensitivities of the copolymers were studied by DLS and UV-Vis. The experiment data show that CB[6] beads are localized on 1,4-diaminobutane units in the side chains of the copolymer. TGA data show that thermal stability of the copolymers increases with the adding of CB[6] threaded because of the enhanced rigidity and the bulky steric hindrance of 4VBCB in the side chain of PNAM4VBCB. DLS data show that the average hydrodynamic radius of copolymer increases with the increase of the copolymer concentration and has a jump with adjusting pH due to the existing of the small size CB[6] dethreaded from the copolymer with increasing pH. Both pH and electrical conductivity curves of the solution of PNAM4VBCB-4 have a jump because CB[6] could dethread from the copolymers with the addition of NaOH. In addition, the copolymers have thermal sensitivity and their phase-change temperatures could be controlled by adjusting the molar ratio of NAM to 4VBCB in the copolymers.     

Thermal studies on the starch-g-copolymers prepared from two terpene acrylate monomers under oxidative conditions

The simultaneous thermal studies (TG/DTG/DSC) coupled with the FTIR analysis of the gaseous decomposition products created under oxidative heating of starch-g-poly(neryl acrylate) and starch-g-poly(geranyl acrylate) copolymers have been presented. To these studies, the copolymers with the following grafting percents (G) were selected: starch-g-poly(neryl acrylate) copolymers: 36.6?±?0.3%, 40.3?±?0.4%, 42.8?±?0.4% and starch-g-poly(geranyl acrylate) copolymers: 28.9?±?0.2%, 32.4?±?0.6%, 35.6?±?0.4%. The performed tests proved that the thermal resistance of the copolymers was strongly dependent on their G values, despite a small difference in the G values between the samples. The slight increase (ca. 6.2–6.7%) in the G value caused the significant drop of the thermal stability of all the studied materials. The TG/DTG/DSC studies confirmed at least three-stage decomposition mechanism of the copolymers where simultaneous pyrolysis, oxidation, dehydration and decarboxylation processes took place. The TG/FTIR analyses showed the emission of various structure fragments; among them, one can mention the creation of some organic fragments such as aldehyde, acid, alkene, alkane, furan fragments, CH₄ and inorganic species (CO₂, CO, H₂O) as a result of the oxidative decomposition processes of the studied copolymers. In addition, the conducted studies demonstrated similar decomposition course and mechanism for both types of the copolymers, regardless of the monomer type used to the graft process.

     

Thermal degradation of poly(siloxane-urethane) copolymers

The aim of this study was to investigate the characteristics and mechanism of the degradation of poly(siloxane-urethane) (PSiU) copolymers by thermogravimetric analysis (TGA) and TGA coupled with Fourier-transform infra-red spectroscopy (TG-FTIR). The PSiU copolymers consisted of 4,4′-diphenylmethane diisocyanate (MDI), 1,4-butanediol (1,4-BD), and OH-terminated polydimethylsiloxane (PDMS). In TGA they exhibited a two-stage degradation at 250-650 °C. The two stages of degradation have been found to comprise eight degradation steps and two interchange reactions, as revealed by TG-FTIR analysis. The main decomposition products have been identified as CO₂, tetrahydrofuran, cyclosiloxane, and macrocyclic species. In addition, the effects of hard segment content (HSC) on the degradation and thermal stability of PSiU copolymers have been investigated by means of TG and DTG curves; notably, a stability region at 410-470 °C is caused by the cyclosiloxane, as verified by TG-FTIR.     

蓖麻油与乳酸的共聚物合成与表征

用熔融聚合法合成了一种蓖麻油和乳酸的共聚物.以丁二酸酐作为共聚体系的引发剂和封端剂,制得端羧基共聚物P(LA-CO)-COOH.研究了反应条件对共聚物分子量的影响,通过核磁共振表征了共聚物的结构.DSC和TG研究表明,蓖麻油链段的引入破坏了聚乳酸的结晶性,提高了共聚物的热稳定性.     

ABA／PET液晶共聚酯酰胺的结构与性能

研究了对象基苯甲酸（ＡＢＡ）／聚对苯二甲酸乙二酯（ＰＥＴ）液晶共聚酯酰胺的晶体结构，以及热性能、流变学和力学性质。广角Ｘ射线衍射研究结果表明ＡＢＡ链节的引入使ＰＥＴ的晶态结构发生畸变，但大部分结晶衍射峰仍然存在。随着ＡＢＡ含量的增加，各晶面间距基本不变，微晶尺寸显著增大，结晶度急剧降低。差示扫描量热分析和热失重结果表明共聚酯胺具有优良的热稳定性，并且随着ＡＢＡ含量的增加，共聚物的热稳定性提高，共聚     

Synthesis and characterization of a new semi-interpenetrating polymer network hydrogel obtained by gamma radiations

A new polyacrylic acid/polyhydroxybutyrate semi-interpenetrating polymer network hydrogel, the s-IPN/PAA-PHB, was prepared by a gamma radiation-induced polymerization. Thermal behavior was studied by thermogravimetric analysis (TG) and Differential scanning calorimetry (DSC), while the s-IPNs composition, FTIR spectra, and swelling kinetics were also determined. It was found that the DSC curve showed a melting point which is attributed to polyhydroxybutyrate. The TG curves showed various stages of degradation which are in correspondence of the presence of crosslinked polyacrylic acid and confirmed the higher thermal stability of the polymer network. The s-IPN/PAA-PHB composition was 10% of PHB and 90% of PAA. Moreover, the network reached approximately 600% of swelling in water, so it behaves like a superabsorbent hydrogel.     

Synthesis, characterization, and thermal properties of diacrylic/divinylbenzene copolymers

In this article, synthesis, characterization, and thermal properties of diacrylic/divinylbenzene copolymers based on the new aromatic tetrafunctional acrylate monomers are presented. The new monomers were generated by treatment of epoxides derived from various aromatic diols: naphthalene-2,3-diol (NAF), biphenyl-4,4′-diol (BIF), bis(4-hydroxyphenyl)methanone (BEP) or 4,4′-thiodiphenol (BES), and epichlorohydrin with acrylic acid. The addition reaction was carried out by a ratio of 0.5 mol of suitable epoxy derivative and 1 mol of acrylic acid in the presence of 0.7 wt% of triethylbenzylammonia chloride (TEBAC) as a catalyst and 0.045 wt% of hydroquinone as a polymerization inhibitor. The chemical structure of the prepared acrylate monomers was confirmed by ¹³C NMR and GC MS spectra. The emulsion–suspension polymerization of acrylate monomers with divinylbenzene (DVB) in the presence of pore-forming diluents (toluene + decan-1-ol) allowed obtaining microspheres containing pendant functional groups (hydroxyl groups). This process was carried out at constant mol ratio of acrylate monomers: DVB (1:1), and constant volume ratio of pore-forming diluents to monomers (1:1). The different concentrations of toluene in the mixture with decan-1-ol were used for qualifying the effect of the diluents on the microsphere characteristics. The influence of synthesis’s parameters on the properties of copolymer beads, e.g., pore size and surface area by BET method, the surface texture by AFM, swelling behavior in polar and non-polar solvents as well as thermal stability by differential scanning calorimetry (DSC), and thermogravimetric analysis (TG) was studied and discussed.     

Thermal and surface study of phenolic resin from cashew nut shell liquid cured by plasma treatment

In this study, phenolic resins from cashew nut shell liquid (CNSL) were applied as coating on Carbon Steel 1020 samples and successfully cured by plasma treatment or with hexamethylenetetramine (HMTA). The crosslinked samples were characterized by thermal analysis using thermogravimetry (TG), derivative thermogravimetry (DTG), differential scanning calorimetry (DSC), and atomic force microscopy (AFM) techniques in order to evaluate the thermal stability of these samples, as well as understand and study the curing process. TG/DTG curves showed that the thermal stability of the HMTA-cured resin was slightly higher than the resin treated by plasma. According to the DSC curves, HMTA-cured resin and plasma-treated resin exhibited only transition temperatures, so both resins were predominantly amorphous. Images generated by AFM provided qualitative evaluation of the resin surfaces, demonstrating that the coating surface with best homogeneity was cured by plasma treatment.     

丙烯腈──苯乙烯/聚丙烯接枝共聚合

丙烯腈（AN）—苯乙烯（St）与聚丙烯（PP）非均相接枝共聚，得杨梅形树脂。研究了AN／St摩尔比对接枝聚合的影响，发现苯乙烯相对含量增大时，非接枝物产量增加，接枝率和接枝效率相应下降。从接枝物的C、H、N分析可计算出聚丙烯、丙烯腈和苯乙烯的组成比例。此外，用二乙烯基苯（DVB）作交联剂，制备了PP－g－（AN－co－St－co－DVB）接枝共聚物—交联型薄壳树脂，交联剂的存在使单体转化率和接枝效率高达100％。