Synthesis and characterization of novel crosslinkable polymers with a nonlinear optical chromophore as a pendant group

New crosslinkable polymers with a nonlinear optical (NLO) active chromophore as a pendant group were synthesized by condensation chain polymerization via palladium‐catalyzed carbon–carbon coupling reactions. The polymerization yields were almost quantitative between the diiodobenzene (DIB) and diethyldipropargyl malonate (DEDPM) or 4‐(dimethylamino)‐4′‐(6‐dipropargylacetoxypropylsulfonyl)stilbene (DASS‐6) monomers. To improve the molecular weight and mechanical properties of the NLO active polymer, we carried out the copolymerization with DIB and DASS‐6 with various feed ratios of DEDPM. The resulting polymers were soluble in organic solvents and spun‐cast onto indium tin oxide‐coated glass substrates to make thin films. The molecular structures of the resulting polymers were characterized with various instrumental methods to confirm the carbon–carbon coupling reactions between the DIB and diacetylene monomers. The absorption of the ultraviolet–visible spectrum of the resulting polymers was drastically reduced after thermal curing at 160 °C because of the crosslinking of the reactive acetylene group in the polymer backbone. The electrooptic coefficient (r₃₃) measured at 1.3 μm ranged from 7 to 15 pm/V. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 4025–4034, 2001     

Site‐selective synthesis and characterization of BODIPY–acetylene copolymers and their transistor properties

To study the effect of site‐selective copolymerization of borondipyrromethene (BODIPY) with acetylene on the structural and optoelectronic properties, three copolymers P1–P3 were synthesized by the Sonogashira cross‐coupling of BODIPY units with diacetylene and bromine capping through all the possible linkages: α‐α ( P1 ), α‐β ( P2 ), and β‐β ( P3 ). The optoelectronic properties of the polymers were investigated systematically to understand the effect of site‐selective polymerization. The HOMO levels of the polymers were significantly tuned from P1 to P3 with negligible change in the LUMO levels. Broadening of absorption spectra from P3 to P1 was observed because of increase in the extent of conjugation. Additionally, the charge transport properties of these polymers in organic thin‐film transistors (OTFTs) revealed that P1 and P3 exhibited only p‐type mobility, whereas P2 exhibited electron mobility. Notably, the further investigations of the surface morphology of polymer films by atomic force microscopy (AFM) unveiled that comb like nanostructural arrangements in P3 was beneficial for the charge‐carrier mobility over the circular arrangements in P1 and P2 . © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1978–1986     

Synthesis,polymerization, and thermal properties of a new acetylene-terminated schiff base

A new acetylene-terminated Schiff base monomer, N,N′-(1,4-phenylenedimethylidyne)-bis-(4-ethynylaniline) (PPP), was synthesized and was characterized by nuclear magnetic resonance and infrared spectroscopy. This monomer was then polymerized to yield a new polymer (PPPP) with alternating units of aromatic imine and diacetylene via an oxidative coupling polymerization of the acetylenic terminal groups. The monomer was also polymerized by thermal curing at elevated temperatures up to 400°C to afford a crosslinked polymer network without significant structural decomposition. Thermal properties and thermal reactions of the monomer and the polymers were studied by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The polymers exhibit excellent thermal stabilities in an inert atmosphere. Electronic properties of the polymers are also discussed.     

Stereospecific polymerization of 9-fluorenyl methacrylate: Tacticity effects on the thermal and photophysical properties of the polymers

Poly(9-fluoreneyl methacrylate) was obtained through anionic polymerization with t-BuLi and t-BuMgBr and through radical polymerization with α,α′-azobisisobutyronitrile. Anionic polymerization with t-BuLi in tetrahydrofuran and radical polymerization afforded syndiotactic polymers (rr ∼ 90%), whereas anionic polymerization with Li and Mg initiators in toluene and CH₂Cl₂ led to isotactic polymers. The thermal and photophysical properties of the polymers were examined. A syndiotactic polymer tended to show higher glass transition and decomposition temperatures than an isotactic polymer. However, polymers with different tacticities were not likely to assume specific, distinctive conformations such as a helix or a π-stacked conformation in solution. An isotactic polymer showed stronger interactions in a CH₂Cl₂ solution with 2,4,7-trinitro-9-fluorenylidenemalononitrile, an electron-acceptor molecule, than a syndiotactic polymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4656–4665, 2004     

Oxidative coupling as a potential route to polymers of group IV acetylenes

Bis tert-butyl-, trimethylsilyl- and trimethylgermyl-diacetylenes were prepared from the corresponding ethynyl Group IV compounds via oxidative coupling. Bis(trimethylstannyl)diacetylene could not be prepared by oxidative coupling, but was prepared via another technique. Coupling of diethynyldimethylsilane did not lead to the expected polymer, as cleavage of the silicon–ethynyl bond occurred. However, coupling of 1,3-bis(dimethylethynyl)disiloxane did lead to polymer containing alternating diacetylene and disiloxane units.     

Preparation of microporous polymers in the form of particles and a thin film from hyperbranched polyphenylenes

The use of a hyperbranched polymer as a building block for the synthesis of a microporous organic polymer was demonstrated. Hyperbranched polyphenylenes (HBPs) were prepared from (3,5‐dibromophenyl)boronic acid, which contained numerous unreacted bromophenyl end groups. Utilizing metal‐catalyzed coupling reactions between these functional groups, cross‐linked porous polymers were obtained. Although the HBPs did not show porosity, their cross‐linked polymers had highly porous structures with Brunauer–Emmett–Teller surface areas of up to 2030 m²/g. An insoluble porous thin film was fabricated by spin casting of a solution containing a HBP followed by Sonogashira cross‐coupling reaction. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2336–2342     

Glaser coupling of polymers: Side‐reaction in Huisgens “click” coupling reaction and opportunity for polymers with focal diacetylene units in combination with ATRP

Atom transfer radical polymerization (ATRP) was used in combination with Glaser type coupling, allowing the clean and efficient formation of symmetrically coupled polymers with a central diacetylene unit. The feasibility of the clean acetylene coupling was investigated with alkyne terminated poly(ethylene glycol) and poly(styrene) obtained by ATRP. The latter allowed subsequent ATRP to be carried out from the coupled products, offering opportunities for the formation of well defined functional materials with central diacetylene units. Glaser coupling was also observed as a side reaction in Huisgens‐type “click” reactions of polymeric alkynes with hindered surface azide groups. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3795–3802, 2009     

Functionalized poly(phenylene‐alt‐bithiophenes): Synthesis,chiroptical properties,and interaction with chiral amines

New functionalized, (a)chiral poly(phenylene‐alt‐bithiophene)s were prepared and their chiroptical properties were studied. The polymers were prepared by a Stille coupling reaction and were functionalized with protected carboxylic acid and amino functions (tert‐butyl ester and BOC respectively). The polymers are present as well conjugated rigid rods in solution, which (chirally) aggregate in nonsolvents and film. In a next step, the protecting group (tert‐butyl ester in case of the carboxylic acid) was removed. Aggregation of this polymer can be induced by addition of amines; if chiral amines are used, the polymer chains chirally stack. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4817–4829, 2008     

Synthesis,characterization, and properties of regioregular conjugated polymers containing quaterthiophene and an acceptor repeating units

Novel donor–acceptor type polymers consisting of alternating quaterthiophene and an electron withdrawing moiety, pyrazinyl or pyridinyl, have been prepared using Stille coupling approach with moderate yields. The polymers were highly soluble in common organic solvents such as tetrahydrofuran and chloroform. The structure and optical properties of the polymers were characterized by NMR, UV‐vis and fluorescence spectroscopy, and cyclic voltammetry, respectively. The polymer having pyrazine unit exhibited a red‐shift in both absorption and emission in comparison with those analogs containing pyridine because of strong electron withdrawing character of the pyrazinyl group. The polymer containing pyrazinyl as acceptor units also depicted decrease in its optical and electrochemical bandgap relative to those polymers containing 2,5‐ or 2,6‐pyridine moieties. The electrochemical behavior showed facile n‐doping and p‐doping properties of those polymers consisting of alternating quaterthiophene and the acceptor moiety. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2163–2171, 2009     

Preparation of stimulus-responsive,polyfluorene-wrapped carbon nanotubes via palladium cross coupling

Decoration of carbon nanotube surfaces without damaging nanotube optoelectronic properties is an ongoing challenge. Here, we utilize Sonogashira coupling chemistry to decorate the nanotube surface without perturbing optoelectronic properties. Reactive, noncovalently functionalized polymer–nanotube complexes were prepared using a polyfluorene with aryl iodide groups in its side chains. The aryl iodides enable Pd cross coupling between polymer–nanotube complexes and small molecules or polymers derivatized with an alkyne. Modestly efficient coupling was found to occur under dilute conditions at elevated temperatures. Successful coupling between aryl iodide and alkyne partners was observed using infrared spectroscopy via the appearance of carbonyl stretches that originate from covalently linked, carbonyl-containing alkynes, and thermogravimetric analysis was used to measure reaction conversion under various conditions. Grafting of the hydrophobic polymer–nanotube complex with poly(ethylene glycol) enabled the dispersion to be transferred from organic to aqueous solution. This chemistry resulted in no damage to the nanotube sidewall, as evidenced by Raman spectroscopy. The aryl iodide-containing polyfluorene–nanotube complex was also coupled to a photoswitchable alkyne-containing spiropyran moiety and it was found that the photoswitch retained its functionality after coupling to the polymer–nanotube complex. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2723–2729     

Anionic synthesis and detection of fluorescence‐labeled polymers with a terminal anhydride group

To monitor polymer–polymer coupling reactions between two different monofunctional polymers in dilute polymer blends, fluorescence‐labeled anhydride‐functional polystyrene (PS) and poly(methyl methacrylate) (PMMA) were prepared by conventional anionic polymerization. Sequential trapping of lithiopolystyrene by 1‐(2‐anthryl)‐1‐phenylethylene (APE) and then di‐t‐butyl maleate (4) provided, after pyrolysis, anhydride‐functional fluorescent PS. Fluorescent PMMA anhydride (8) was synthesized with sec‐butyllithium/APE as an initiator for the anionic polymerization of methyl methacrylate, trapping by 4, and pyrolysis. These polymers could be reacted with amine‐functional polymers by melt blending, and the reaction progress could be monitored by gel permeation chromatography coupled with fluorescence detection. This technique not only allows monitoring of the coupling reaction with high sensitivity (ca. 100 times more sensitive than refractive index detection) but also permits selective detection because unlabeled polymers are invisible to fluorescence detection. This highly sensitive and selective detection methodology was also used to monitor the coupling reaction of 8 with PS‐NH₂ at a thin‐film interface, which was otherwise difficult to detect by conventional methods. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2177–2185, 2000     

Synthesis,photophysics, structure‐tunable photoluminescence,and electrochemical properties of soluble poly(p‐phenylenevinylene)‐based polymers with adjacent 1,3,4‐oxadiazoles in the backbone

Three new poly(p‐phenylenevinylene)‐based polymers containing two 1,3,4‐oxadiazole moieties in the main chain per repeat unit were synthesized by Heck coupling. A single, double, or triple bond was introduced between the oxadiazoles to provide a means for modifying the polymer properties. The polymers were readily soluble in common organic solvents and showed T_g values lower than 50 °C. The color of the emissive light in both the solid state and the solution could be tuned by a change in the nature of the bond between the oxadiazole rings. The polymers emitted ultraviolet‐green light in solution with a photoluminescence (PL) emission maximum at 345–483 nm and blue‐green light at 458–542 nm in thin films. The PL quantum yields in solution were 0.36–0.43. The electrochemical properties are affected by the nature of the bond between the oxadiazoles as well. In polymers with a single bond between the oxadiazoles, a lower ionization potential was observed than in polymers with a double or triple bond. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3079–3090, 2005     

Poly(perylene‐alt‐phenyleneethynylene)s with multiple pendant ester groups in various lengths: Synthesis,photophysics and selective hydrolysis

Five fluorescence polymers with poly(perylene‐alt‐phenyleneethynylene)s (PPPEs) backbone and multiple side chains containing ester‐groups were synthesized via Sonogashira coupling reaction. These polymers were soluble in common organic solvents to form red‐orange solution. The polymer powders had dark red color. The absorption/emission spectra of these polymers were similar, with absorption bands between 300 and 600 nm and an emission peak between 520 and 700 nm. Furthermore, the ester groups of the side chains were partially or completely hydrolyzed, resulting in the fluorescence PPPEs with tunable density of carboxylic acid functional groups on the polymer chains as interaction/reaction sites for further applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1880–1886     

Synthesis of hydroxy‐terminated,oligomeric poly(silarylene disiloxane)s via rhodium‐catalyzed dehydrogenative coupling and their use in the aminosilane–disilanol polymerization reaction

A series of oligomeric, hydroxy‐terminated silarylene–siloxane prepolymers of various lengths were prepared via dehydrogenative coupling between 1,4‐bis(dimethylsilyl)benzene [H(CH₃)₂SiC₆H₄Si(CH₃)₂H] and excess 1,4‐bis(hydroxydimethylsilyl)benzene [HO(CH₃)₂SiC₆H₄Si(CH₃)₂OH] in the presence of a catalytic amount of Wilkinson's catalyst [(Ph₃P)₃RhCl]. Attempts to incorporate the diacetylene units via dehydrogenative coupling polymerization between 1,4‐bis(dimethylsilyl)butadiyne [H(CH₃)₂Si? C?C? C?C? Si(CH₃)₂H] and the hydroxy‐terminated prepolymers were unsuccessful. The diacetylene units were incorporated into the polymer main chain via aminosilane–disilanol polycondensation between 1,4‐bis(dimethylaminodimethylsilyl)butadiyne [(CH₃)₂N? Si(CH₃)₂? C?C? C?C? (CH₃)₂SiN(CH₃)₂] and the hydroxy‐terminated prepolymers. Linear polymers were characterized by Fourier transform infrared, ¹H and ¹³C NMR, gel permeation chromatography, differential scanning calorimetry, and thermogravimetric analysis, and they were thermally crosslinked through the diacetylene units, producing networked polymeric systems. The thermooxidative stability of the networked polymers is discussed. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1334–1341, 2002     

Synthesis,optical properties,and electroluminescence of conjugated poly(p‐phenylenevinylene) derivatives containing 1,3,4‐oxadiazole and pyridine rings in the main chain

Three new poly(p‐phenylenevinylene) derivatives—PO, POD, and POP—with oxadiazole and pyridine rings along the main chain were synthesized via Heck coupling. The polymers were amorphous and dissolved readily in common organic solvents. They showed relatively low glass‐transition temperatures (up to 42 °C) and satisfactory thermal stability. Solutions of the polymers emitted blue‐greenish light with photoluminescence (PL) emission maxima around 460 nm and PL quantum yields of 0.28–0.49. Thin films of the polymers displayed PL emission maxima at 461–521 nm, and their tendency to form aggregates was significantly influenced by the chemical structure. Light‐emitting diodes with polymers PO and POP, with an indium tin oxide/poly(ethylenedioxythiophene) (PEDOT)/polymer/Ca configuration, emitted yellow and green light, respectively, and this could be attributed to excimer emission. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3212–3223, 2004     

Greatly enhanced thermo‐oxidative stability of polybenzoxazine thermoset by incorporation of m‐carborane

Novel polybenzoxazine precursor containing m‐carborane unit in the main‐chain has been firstly synthesized through click reaction of diazidomethyl m‐carborane (DAMC) and diacetylene bisbenzoxazine (DABB). Meanwhlie, the traditional polybenzoxazine precursor was also prepared through click reaction of diazidomethyl p‐benzene (DAPB) and DABB as a control. 1H NMR was used to confirm the structures of the monomers and the resulting polymers. FT‐IR and differential scanning calorimetry (DSC) were used to study the curing behavior of carborane‐containing benzoxazine polymer (CCBP). Dynamic mechanical analysis (DMA) study demonstrated that the cured CCBP had high storage moduli and high Tg. Thermogravimetric analysis (TGA) and ablation test showed that the cured CCBP had outstanding thermo‐oxidative stability. During thermal ablation of cured CCBP, organic material was degraded, and a passivation layer with oxidized m‐carboranes was formed, which prevented the underlying polymer from further degradation. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 973–980     

Synthesis of regiocontrolled polymer having 2-naphthol unit by CuCl-amine catalyzed oxidative coupling polymerization

Regiocontrolled polymer (2) having 2-naphthol unit was prepared by oxidative coupling polymerization of bis(2-naphthol) (1). Polymerizations were conducted in dichloromethane in the presence of [di-μ-hydroxo-bis(N,N,N′,N′-tetramethylethylenediamine)copper(II)] chloride [CuCl(OH)TMEDA] under air at room temperature, producing polymers with number-average molecular weights up to 12,000. The structure of polymer 2 was characterized by 270 MHz ¹H–NMR and 68.5 MHz ¹³C–NMR spectroscopies and was estimated to consist almost completely of 1,1′-linkage. The polymer was readily soluble in polar aprotic solvents and tetrahydrofuran at room temperature. Thermogravimetric analysis of polymer 2 showed 10% weight loss at 450°C in nitrogen. The model reactions were studied to clarify the applicability of CuCl(OH)TMEDA for coupling of naphthol derivatives. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3702–3709, 1999     

Synthesis,characterizations, and electrochromic properties of donor–acceptor type polymers containing 2, 1, 3‐benzothiadiazole and different thiophene donors

Three donor–acceptor type π‐conjugated monomers containing 2, 1, 3‐benzothiadiazole (Tz) as the acceptor unit and different thiophene derivatives (thiophene, 3,4‐ethylenedioxythiophene, and thieno[3,2‐b]thiophene) as the donor units have been synthesized via Stille coupling reaction. The corresponding polymers are electrochemically deposited onto FTO glass by cyclic voltammetry (CV). The maximum absorption wavelength of the neutral polymers varies with the electron‐rich character of incorporated thiophene moieties, giving rise to tunable colors. In addition, the prepared polymer films demonstrate reasonable transmittance modulation, fast switching rate, high color efficiency and good stability, which meet the requirements of smart windows and electrochromic display applications. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2239–2246     

Poly(fluorenevinylene) derivatives by Heck coupling: Synthesis,photophysics, and electroluminescence

Three new poly(fluorenevinylene) derivatives were synthesized, characterized, and used as emissive materials in light‐emitting diodes (LEDs). They were synthesized by Heck coupling of 9,9‐dihexyl‐2,7‐divinylfluorene with 2,7‐dibromo‐9,9‐dihexylfluorene, 2,3‐bis(4‐bromophenyl)quinoxaline, or 2,5‐bis(4‐bromophenyl)‐3,4‐diphenylthiophene to afford the polymers F , Q , and T , respectively. Polymers F and Q had medium number–average molecular weights (M_n ? 14,000) with relatively narrow polydispersity (1.3–1.6), while T was obtained as an oligomer (M_n ? 4000). All polymers were soluble in common organic solvents, such as tetrahydrofuran (THF), chloroform, dichloromethane, and toluene. They emitted blue‐greenish fluorescence light in dilute THF solution (444–491 nm), with photoluminescence (PL) quantum yields of 0.32–0.54, and in thin film (453–488 nm). LEDs with the configuration of ITO/PEDOT‐PSS/Polymer/Li:Al were fabricated and evaluated. The electroluminescence (EL) spectra of the Q and F polymers were very broad covering the blue–green–red region, whereas the spectrum of the polymer T was almost purely blue. The threshold electrical field for light emission of the devices was almost the same (?1.75 MV/cm). The external quantum efficiency of the devices of polymers Q and F was about 1.0 × 10^?3%, whereas that of polymer T was ?3.0 × 10^?5%. The fluorescence lifetime of polymers F and Q was significantly longer than that of the polymer T . © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4494–4507, 2006     

Synthesis of conjugated polymers with azobenzene moieties in the main chain

Poly(phenylenevinylene)‐based conjugated polymers with azobenzene groups in the main chains were prepared by the Pd‐catalyzed coupling polymerization of divinylarenes with dihaloarenes. The Pd‐catalyzed coupling polymerization of 4,4′‐divinylazobenzene with dihaloarenes such as 1,3‐dibromobenzene, 1,4‐dibromo‐2,5‐dihexylbenzene, 4,4′‐dibromoazobenzene, and 4,4′‐diiodoazobenzene resulted in polymers with poor solubility. In contrast, soluble polymers containing azobenzene moieties in the main chains were attainable from divinylbenzenes with 4,4′‐dihaloazobenzenes if either or both of the monomers possessed hexyl groups on the aromatic rings. The number‐average molecular weight of the polymer exceeded 10,000 under optimized conditions, and the polymer showed a remarkably redshifted absorption in the visible region (456 nm). ¹H NMR and IR spectra supported that the polymers having only trans‐geometry for the double bonds. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1057–1063, 2000