Synthesis of hyperbranched polymers from vegetable oil based monomers via ozonolysis pathway

In this work, a variety of hyperbranched polymers (HBPs), such as hyperbranched polycarbonates, polyesters, polyurethanes and polyacetals, was successfully synthesized from castor oil and soybean oil based monomers via a A₂ + B₃ polycondensation. First, B₃ monomer triols (TriOL), trialdehydes (TriAD), and tricarboxylic acids (TriAC) were obtained by ozonolysis of castor oil and soybean oil with following reductive or oxidative treatment. Their structures were characterized by ¹H NMR and ATR‐FTIR spectroscopy as well as electrospray ionization‐Time of Flight‐mass spectrometry. These trifunctional B₃ monomers were applied in the preparation of HBPs. The resulting HBPs had number averaged molar mass (M_n) up to 9400 g/mol and weight averaged molar mass (M_w) up to 40,000 g/mol. Through adjusting the initial molar ratio of A₂ to B₃ monomers, hydroxyl terminated (from TriOL monomers) or carboxylic acid (from TriAC monomers) terminated HBPs could be obtained. All the HBPs were characterized by ¹H NMR, size exclusion chromatography, and DSC. These HBPs are potential candidates for the synthesis of cross‐linked polymeric materials or in biomedical applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2104–2114     

Efficient fabrication of polymer nanoparticles via sonogashira cross‐linking of linear polymers in dilute solution

The synthesis of single‐chain nanoparticles by palladium‐catalyzed Sonogashira coupling between a terminal alkyne and a di‐halo aryl cross‐linker is reported. Statistical copolymers with trimethylsilyl protected alkyne groups pendent to the linear methacrylate back bones were synthesized using reversible addition‐fragmentation chain transfer polymerization post polymerization de‐protection providing terminal alkyne functionalized linear polymer chains. These linear polymer chains were intramolecularly cross‐linked via bifunctional cross‐linkers. The resulting well‐defined covalently bonded nanoparticles were characterized via triple‐detection size exclusion chromatography where MALS detector provided molecular weight information and viscometric detection characterizes particle size and conformations. The particle size could be readily tuned through polymer molecular weight and by degree of cross‐linking. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 209–217     

Synthesis and characterization of polymer electrolytes based on cross‐linked phenoxy‐containing polyphosphazenes

A new method to prepare the polymer electrolytes for lithium‐ion batteries is proposed. The polymer electrolytes were prepared by reacting poly(phosphazene)s (MEEPP) having 2‐(2‐methoxyethoxy)ethoxy and 2‐(phenoxy)ethoxy units with 2,4,6‐tris[bis(methoxymethyl)amino]‐1,3,5‐triazine (CYMEL) as a cross‐linking agent. This method is simple and reliable for controlling the cross‐linking extent, thereby providing a straightforward way to produce a flexible polymer electrolyte membrane. The 6 mol % cross‐linked polymer electrolyte (ethylene oxide unit (EO)/Li = 24:1) exhibited a maximum ionic conductivity of 5.36 × 10^?5 S cm^?1 at 100 °C. The ⁷Li linewidths of solid‐state static NMR showed that the ionic conductivity was strongly related to polymer segment motion. Moreover, the electrochemical stability of the MEEPP polymer electrolytes increased with an increasing extent of cross‐linking, the highest oxidation voltage of which reached as high as 7.0 V. Moreover, phenoxy‐containing polyphosphazenes are very useful model polymers to study the relationship between the polymer flexibility; that is, the cross‐linking extent and the mobility of metal ions. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 352–358     

Novel hyperbranched polymers synthesized via A3 + B(B′) approach by radical addition‐coupling polymerization

In this study, a novel application of radical addition‐coupling polymerization (RACP) for synthesis of hyperbranched polymers is reported. By Cu/PMDETA‐mediated RACP of 2‐methyl‐2‐nitrosopropane with trimethylolpropane tris(2‐bromopropionate) or a bromo‐ended 3‐arm PS macromonomer, two types of hyperbranched polymers with high degree of polymerization are synthesized under mild conditions, respectively. The chemical structures of the hyperbranched polymers are carefully characterized. By selective degradations of the ester groups and weak bonds of NO? C in the polymers, high degree of alternative connection of the two monomers in the synthesized polymers have been identified. Based on the experimental results, mechanism of formation of the hyperbranched polymer is proposed, which includes formation of carbon radicals from the tribromo monomer through single electron transfer, its capture by 2‐methyl‐2‐nitrosopropane that results in nitroxide radical, and cross‐coupling reaction of the nitroxide radical with other carbon radicals. Hyperbranched polymer can be formed in a step‐growth mode after multiple steps of such reactions. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 904–913     

Synthesis and characterization of end‐group modified hyperbranched polyetherimides

End‐group modified hyperbranched polyetherimides were prepared by a one‐pot, two‐step reaction sequence. General synthetic techniques were developed to prepare both monofunctional terminating segments and the corresponding modified polyetherimide hyperbranched polymers. Monofunctional groups were used to terminate an AB₂‐type polycondensation reaction, generating capped hyperbranched polymers (HBPs). The composition and constitution of the end groups controlled the solubility and thermal properties of the HBPs. For the same polymer backbone, different end groups were able to shift the glass‐transition temperature nearly 100 °C. End‐group modification greatly influenced the film‐forming ability of the HBPs. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 936–946, 2002     

Synthesis and properties of conjugated polymers containing 3,9‐ and 2,9‐linked carbazole units in the main chain

Novel conjugated polymers containing 3,9‐ or 2,9‐linked carbazole units in the main chain were synthesized by the polycondensation of ethynyl‐ and iodo‐substituted 9‐arylenecarbazolylene monomers, and their optical and electrical properties were studied. Polymers with weight‐average molecular weights of 3400–12,000 were obtained in 76–99% yields by the Sonogashira coupling polycondensation in piperidine or tetrahydrofuran (THF)/piperidine at 30 °C for 48 h. All the 3,9‐linked polymers absorbed light around 300 nm. The para‐phenylene‐linked polymer also absorbed light around 350 nm, while meta‐phenylene‐linked one did not. The 3,9‐linked polymers absorbed light at a wavelength longer than the 2,9‐linked one. The polymers emitted blue fluorescence with high quantum yields (0.21–0.78) upon excitation at the absorption maxima. The polymers were oxidized around 0.6 V, and reduced around 0.5 V. Poly( 1 ) showed the dark conductivity of 3.7 × 10^?11 S/cm (10³ V/cm). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3506–3517, 2009     

Modulation of optical and electronic properties of quinoxailine‐based conjugated polymers for organic photovoltaic cells

The synthesis of donor–acceptor type semiconducting copolymers is described. Quinoxaline (QX) or difluorinated quinoxaline (DFQX) derivatives serve as electron acceptors, while thiophene (T) or selenophene (Se) serve as electron donors. Alternating polymers are synthesized through Stille cross‐coupling, and their thermal stability, optical and electrochemical properties, field‐effect carrier mobilities, film crystallinities, and photovoltaic performances are investigated. The intramolecular charge transfer between the electron‐donating and electron‐accepting units in the backbone induces absorption from 450 to 750 nm. The optical band‐gap energies of the polymers are between 1.65 and 1.73 eV, and depend on the polymer structure. Organic photovoltaic cells fabricated using a polymer composed of DFQX and selenophene (PSe‐DFQX) exhibit a power conversion efficiency of 5.14% with an open‐circuit voltage of 0.78 V, a short‐circuit current density of 11.71 mA/cm², and fill factor of 0.57 under AM 1.5 G irradiation (100 mW cm^?2). © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1904–1914     

Tuning the optical properties of hyperbranched polymers through the modification of the end groups

Dye‐capped, hyperbranched, conjugated polymers were prepared by the modification of the peripheral bromo end groups of the hyperbranched polymer core with a palladium‐catalyzed Suzuki–Miyaura cross‐coupling reaction. The dye‐modified, hyperbranched polymers had high molecular weights and displayed good solubility in common organic solvents such as tetrahydrofuran, toluene, and chloroform. The structure of the dye‐modified, hyperbranched polymers was characterized by ¹H and ¹³C NMR and elemental analysis. The thermal properties of five kinds of hyperbranched polymers were investigated with thermogravimetric analysis and differential scanning calorimetry. The optical properties of the dye‐capped, hyperbranched polymers were investigated with ultraviolet‐absorption and fluorescence spectroscopy. The hyperbranched structure could effectively reduce the aggregation of the peripheral dyes. The emission colors of the hyperbranched polymers could be easily tuned by end‐group modification. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 111–124, 2007     

Tuning the adsorption and fluorescence properties of aminal‐linked porous organic polymers through N‐heterocyclic group decoration

Aiming at tuning the adsorption and fluorescence properties of targeted porous organic polymer, four new aminal‐linked porous organic polymers (NAPOPs) were synthesized through the reaction of 1,4‐Bis(4,6‐diamino‐s‐triazin‐2‐yl) benzene (BATB) with four kinds of aldehydes substituted with different N‐heterocyclic groups. Among the polymers, NAPOP‐3 decorated with 5‐phenyl‐tetrazole group shows the largest CO₂ adsorption capacity (2.52 mmol g^?1 at 273 K and 100 kPa) because of its relative large surface area, while NAPOP‐1 decorated with piperazine groups shows relative large CO₂/N₂ adsorption selectivity (77 at 273 K and 100 kPa), attributable to its large CO₂ adsorption heats and cabined pore (<4 Å). Meanwhile, NAPOP‐1 and ?3 exhibit high adsorption rate toward iodine with a high capacity (>240 wt %). In addition, different luminescence emissions were also observed for NAPOPs, indicating different intramolecular charger transfer occurred inside polymer networks. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1724–1730     

Synthesis of conjugated polymers with azobenzene moieties in the main chain

Poly(phenylenevinylene)‐based conjugated polymers with azobenzene groups in the main chains were prepared by the Pd‐catalyzed coupling polymerization of divinylarenes with dihaloarenes. The Pd‐catalyzed coupling polymerization of 4,4′‐divinylazobenzene with dihaloarenes such as 1,3‐dibromobenzene, 1,4‐dibromo‐2,5‐dihexylbenzene, 4,4′‐dibromoazobenzene, and 4,4′‐diiodoazobenzene resulted in polymers with poor solubility. In contrast, soluble polymers containing azobenzene moieties in the main chains were attainable from divinylbenzenes with 4,4′‐dihaloazobenzenes if either or both of the monomers possessed hexyl groups on the aromatic rings. The number‐average molecular weight of the polymer exceeded 10,000 under optimized conditions, and the polymer showed a remarkably redshifted absorption in the visible region (456 nm). ¹H NMR and IR spectra supported that the polymers having only trans‐geometry for the double bonds. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1057–1063, 2000     

Influence of linkage chemistry on folding,self-assembly,and photoresponse of amphiphilic azobenzene main chain polymers

Two types of amphiphilic polymers composed of azobenzene repeat units in the main chain connected either via ethynylene (acetylene) or butadiynylene (diacetylene) linkages and carrying oligo(ethylene glycol) side chains were reported. Synthesis was accomplished by polycondensation involving Sonogashira–Hagihara cross coupling and Glaser coupling, respectively. Solvent titration experiments revealed that both polymers fold into stable helices in a polar environment. While the ethynylene-bridged polymer resembled the behavior of its oligomeric counterparts, introduction of the extended diacetylene unit strengthened π,π-stacking interactions in case of the butadiynylene-bridged polymer leading to a pronounced aggregation tendency and suppressing photoisomerization in the folded state. Our study demonstrates the importance of backbone connectivity to balance intra- and intermolecular forces for the successful design of photoresponsive polymers. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 313–318     

Synthesis and characterization of polyphenylenes with polypeptide and poly(ethylene glycol) side chains

We report a novel approach for fabrication of multifunctional conjugated polymers, namely poly(p‐phenylene)s (PPPs) possessing polypeptide (poly‐l ‐lysine, PLL) and hydrophilic poly(ethylene glycol) (PEG) side chains. The approach is comprised of the combination of Suzuki coupling and in situ N‐carboxyanhydride (NCA) ring‐opening polymerization (ROP) processes. First, polypeptide macromonomer was prepared by ROP of the corresponding NCA precursor using (2,5‐dibromophenyl)methanamine as an initiator. Suzuki coupling reaction of the obtained polypeptide and PEG macromonomers both having dibromobenzene end functionality using 1,4‐benzenediboronic acid as the coupling partner in the presence of palladium catalyst gave the desired polymer. A different sequence of the same procedure was also employed to yield polymer with essentially identical structure. In the reverse sequence mode, low molar mass monomer (2,5‐dibromophenyl)methanamine, and PEG macromonomer were coupled with 1,4‐benzenediboronic acid in a similar way followed by ROP of the L‐Lysine NCA precursor through the primary amino groups of the resulting polyphenylene. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1785–1793     

Synthesis of novel hyperbranched polymers featuring oxazoline linear units and their application in fast‐drying solvent‐borne coating formulations

Novel acid‐terminated hyperbranched polymers (HBPs) containing adipic acid and oxazoline monomers derived from oleic and linoleic acid have been synthesized via a bulk polymerization procedure. Branching was achieved as a consequence of an acid‐catalyzed opening of the oxazoline ring to produce a trifunctional monomer in situ which delivered branching levels of >45% as determined by ¹H and ¹³C NMR spectroscopy. The HBPs were soluble in common solvents, such as CHCl₃, acetone, tetrahydrofuran, dimethylformamide, and dimethyl sulfoxide and were further functionalized by addition of citronellol to afford white‐spirit soluble materials that could be used in coating formulations. During end group modification, a reduction in branching levels of the HBPs (down to 12–24%) was observed, predominantly on account of oxazoline ring reformation and trans‐esterification processes under the reaction conditions used. In comparison to commercial alkyd resin paint coatings, formulations of the citronellol‐functionalized hyperbranched materials blended with a commercial alkyd resin exhibited dramatic decreases of the blend viscosity when the HBP content was increased. The curing characteristics of the HBP/alkyd blend formulations were studied by dynamic mechanical analysis which revealed that the new coatings cured more quickly and produced tougher materials than otherwise identical coatings prepared from only the commercial alkyd resins. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3964–3974     

Postfunctionalization of polyoxanorbornene backbone through the combination of bromination and nitroxide radical coupling reactions

The brominated backbone of poly(oxanorbornene imide) (PONB) (PONB‐Br) was functionalized with 2,2,6,6‐tetramethylpiperidine 1‐oxyl (TEMPO)‐acrylate, ‐epoxy, and poly (ethylene glycol) (PEG) yielding PONB‐acrylate, PONB‐epoxy, and PONB‐PEG through the nitroxide radical coupling (NRC) reaction. Although an excess amount of functional‐TEMPOs were used. The observed NRC efficiencies were found in the range of 7–25%. Notably, ¹H NMR spectra of all polymers exhibited a signal at 6.08 ppm after NRC reactions indicating rebuilding of the main chain double bond and further identified by ¹³C NMR analysis. The inevitable formation of double bond through the tendency of the recombination of the formed radicals was supported by a separate experiment conducted without utilizing functional‐TEMPO. Besides, the versatility of the ROMP backbone further demonstrated by the introduction hetero functionality onto the polymer by a consecutive reactions. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2381–2389     

Synthesis of hyperbranched polymer having binaphthol units via oxidative cross‐coupling polymerization

The oxidative coupling polymerization of triphenylamine derivatives having 2‐naphthol moieties with a CuCl‐2,2′‐isopropylidenebis(4‐phenyl‐2‐oxazoline) catalyst under an O₂ atmosphere was carried out. The polymerization of the monomer bearing both the hydroxynaphthoate and naphthol units afforded a hyperbranched polymer with a high cross‐coupling selectivity of > 99%, which showed a number‐average molecular weight of 20.3 × 10³. In addition, the obtained polymer was quite soluble in THF. The photoluminescence and electrochemical properties of the obtained polymers were also examined. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1034–1041, 2008     

Organosoluble star polymers from a cyclodextrin core

Well‐defined star polymers were synthesized with a combination of the core‐first method and atom transfer radical polymerization. The control of the architecture of the macroinitiator based on β‐cyclodextrin bearing functional bromide groups was determined by ¹³C NMR, fast atom bombardment mass spectrometry, and elemental analysis. In a second step, the polymerization of the tert‐butyl acrylate monomer was optimized to avoid a star–star coupling reaction and allowed the synthesis of a well‐defined organosoluble polymer star. The determination of the macromolecular dimensions of these new star polymers by size exclusion chromatography/light scattering was in agreement with the structure of armed star polymers in a large range of predicted molecular weights. This article describes a new approach to polyelectrolyte star polymers by postmodification of poly(tert‐butyl acrylate) by acrylic arm hydrolysis in a water‐soluble system. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5186–5194, 2005     

Iridium complex grafted to 3,6‐carbazole‐alt‐tetraphenylsilane copolymers for blue electrophosphorescence

We designed a 3,6‐dibromo‐9‐hexyl‐9H‐carbazole derivative with the blue emissive iridium complex bis[2‐(4,6‐difluorophenyl)pyridyl‐N,C^2′](picolinato)iridium(III) (FIrpic) linked at the alkyl terminal. Based on this monomer, novel 3,6‐carbazole‐alt‐tetraphenylsilane copolymers grafted with FIrpic were synthesized by palladium‐catalyzed Suzuki coupling reaction, and the content of FIrpic in the polymers could be controlled by feed ratio of the monomers. The polymer films mainly show blue emission from FIrpic, and the emission intensity from the polymer backbones is much weaker compared with the doped analogues, which demonstrates an efficient energy transfer from polymeric host to covalently bonded guest. The phase separation in the polymers was suppressed, which can be identified by atomic force microscopy and designed electroluminescent (EL) devices. EL devices based on the polymers exhibited blue phosphorescence from FIrpic. The luminous efficiency of preliminary devices reached 2.3 cd/A, and the efficiency roll‐off at high current densities was suppressed. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1859–1865, 2010     

Highly selective oxidative cross‐coupling polymerization with copper(I)‐bisoxazoline catalysts

The asymmetric oxidative coupling polymerization of methyl 6,6′‐dihydroxy‐2,2′‐binaphthalene‐7‐carboxylate with the copper‐diamine catalysts under an O₂ atmosphere was carried out. As is the case with the CuCl‐2,2′‐(S)‐isopropylidenbis(4‐phenyl‐2‐oxazoline) [(S)IPhO] catalyst, a polymer with a high cross‐coupling selectivity of 96% was obtained in 71% yield, whose THF‐soluble part had a number‐average molecular weight of 4.5 × 10³. To estimate the enantioselectivity with respect to the cross‐coupling linkage in the obtained polymer, the model asymmetric oxidative cross‐coupling reaction with CuCl‐(S)IPhO was also conducted, and the products showed a 94% cross‐coupling selectivity and enantioselectivity of 31% ee (S). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6287–6294, 2005     

Effect of branched alkyl side chains on the performance of thin‐film transistors and photovoltaic cells fabricated with isoindigo‐based conjugated polymers

New isoindigo and di(thienyl)ethylene‐containing π‐extended conjugated polymers with different branched side chains were synthesized to investigate their physical properties and device performance in thin‐film transistors and photovoltaic cells. 11‐Butyltricosane (S3) and 11‐heptyltricosane (S6) groups were used as side‐chain moieties tethered to isoindigo units. The linking groups between the polymer backbone and bifurcation point in the branched side chain differ in the two polymers (i.e., PIDTE‐S3 and PIDTE‐S6 ). The polymers bearing S6 side chains showed much better charge transport behavior than those with S3 side chains. Thermally annealed PIDTE‐S6 film exhibited an outstanding hole mobility of 4.07 cm² V^?1 s^?1 under ambient conditions. Furthermore, bulk heterojunction organic photovoltaic cells made from a blend film of PIDTE‐S3 and (6,6)‐phenyl C61‐butyric acid methyl ester demonstrated promising device performance with a power conversion efficiency in the range of 4.9–5.0%. © 2015 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 2015 , 53, 1226–1234     

A comparison of the properties of two structurally equivalent but regiochemically different mono‐alkylated polybithiophenes prepared through AABB‐type stille polycondensation

Previous routes to polymers with mono‐alkylated bithiophenes have proceeded through polymerization of monoalkyl‐2,2′‐bithiophene monomers through oxidative or AB‐type cross‐coupling polymerizations. The resulting polymer regiochemistry affects both the location and orientation of the polymer side‐chains. In contrast, AABB‐type cross‐coupling polymerizations can control the location and in some cases the orientation of the side‐chains. To study how this control can impact polymer properties, two poly(monodecyl‐2,2′‐bithiophene) polymers have been synthesized through Stille AABB‐type polycondensations of 2,5‐bis(trimethylstannyl)thiophene with different monomers. The alkyl side‐chains are located on every other thiophene, but polymer 1 consists of both head‐to‐tail and head‐to‐head dyads, whereas polymer 2 is made up of only head‐to‐head dyads. ¹H NMR, ¹³C NMR, and heteronuclear single quantum correlation spectroscopy are used to confirm and contrast the polymer regiochemistries. The physical properties of the two polymers are analyzed using UV–vis spectroscopy, differential scanning calorimetry, and grazing‐incidence X‐ray diffraction. Polymer 2 is found to display significantly more aggregation in solution than 1, and it displays different thermal properties. The film properties of polymers 1 and 2, however, are very similar, with nearly identical UV–vis profiles and d‐spacing values as determined by grazing incidence X‐ray diffraction. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013