Size-Exclusion "capture and release" separations using surface-patterned poly(N-isopropylacrylamide) hydrogels

Micrometer-scale poly(N-isopropylacrylamide) (poly-NIPAAm) hydrogel monolith patterns were fabricated on solid surfaces using soft lithography. At sufficiently high aspect ratios, the hydrogel monoliths swell and contract laterally with temperature. The spaces between the monoliths form a series of trenches that catch, hold, and release appropriately sized targets. A series of poly-NIPAAm monoliths were fabricated with dry dimensions of 40 microm height, 12 microm diameter, and a spacing of 12 microm between monoliths. Above the lower critical solution temperature (LCST), the monoliths collapse to their dry dimensions and the spacing between monoliths is 12 microm. Below the LCST, the monoliths swell by 70% in the lateral direction, reducing the gap size between monoliths to 3 microm. The potential use of the hydrogel monoliths as size-selective "catch and release" structures was demonstrated with a mixture of 6 and 20 microm polystyrene microspheres, where the 6 microm diameter particles were selectively concentrated and separated from the larger particles.     

Fabrication and characterisation of gold nano-particle modified polymer monoliths for flow-through catalytic reactions and their application in the reduction of hexacyanoferrate

Polymer monoliths in capillary (100 μm i.d.) and polypropylene pipette tip formats (vol: 20 μL) were modified with gold nano-particles (AuNP) and subsequently used for flow-through catalytic reactions. Specifically, methacrylate monoliths were modified with amine-reactive monomers using a two-step photografting method and then reacted with ethylenediamine to provide amine attachment sites for the subsequent immobilisation of 4 nm, 7 nm or 16 nm AuNP. This was achieved by flushing colloidal suspensions of gold nano-particles through each aminated polymer monolith which resulted in a multi-point covalent attachment of gold via the lone pair of electrons on the nitrogen of the free amine groups. Field emission scanning electron microscopy and scanning capacitively coupled conductivity detection was used to characterise the surface coverage of AuNP on the monoliths. The catalytic activity of AuNP immobilised on the polymer monoliths in both formats was then demonstrated using the reduction of Fe(III) to Fe(II) by sodium borohydride as a model reaction by monitoring the reduction in absorbance of the hexacyanoferrate (???) complex at 420 nm. Catalytic activity was significantly enhanced on monoliths modified with smaller AuNP with almost complete reduction (95 %) observed when using monoliths agglomerated with 7 nm AuNPs.

Cluster-associated filling of water molecules in graphene-based mesopores

Graphene monoliths were prepared through unidirectional freeze-drying method of graphene oxide colloids-KOH mixed solution and successive reduction by heating at 573 K in Ar. The porosity- and crystallinity-controlled graphene monoliths were prepared by the KOH activation at different temperature and the post-heating in Ar. These activated graphene monoliths were characterized by N₂ adsorption at 77 K, X-ray diffraction and Raman spectroscopy. Water adsorption isotherms show a typical hydrophobicity below P/P ₀ = 0.5 and a marked hydrophilicity above P/P ₀ = 0.6, which depends on the pore width. In the water adsorption isotherms of porous graphene monoliths activated at different temperature, the higher the activation temperature, the larger the rising P/P ₀. No essential change in the shape of the water adsorption isotherm for the post-heated nanoporous graphene monoliths is observed except for the decrease in water adsorption amount with higher post-heating temperature. The linear relationship between the saturated water adsorption and pore volume whose width is smaller than 4 nm indicates clearly that water molecules are adsorbed in small mesopores by the cluster-associated filling mechanism.     

Recent advances in polymer monoliths for ion-exchange chromatography

The use of polymeric materials in ion-exchange chromatography applications is advantageous because of their typically high mechanical stability and tolerance of a wide range of pH conditions. The possibility of using polymeric monoliths in ion-exchange chromatography is therefore obvious and many of the same strategies developed for polymeric particles have been adapted for use with polymeric monoliths. In this review different strategies for the synthesis of polymeric monoliths with ion-exchange functionality are discussed. The incorporation of ion-exchange functionality by co-polymerization is included, as also are different post-polymerization alterations to the monolith surface such as grafting. The formulations and strategies presented include materials intended for use in analytical separations in ion-exchange chromatography, sample pre-treatment or enrichment applications, and materials for capillary electrochromatography. Finally, examples of the use of polymeric monoliths in ion-exchange chromatography applications are included with examples published in the years 2003 to 2008.

Composite ceramic monoliths with poly(ester acrylate) and poly(ester acrylate)-poly(<Emphasis Type="Italic">N</Emphasis>-vinylcaprolactam) coatings

Polymerization of a series of oligo(ester acrylates) on the surface of ceramic monoliths was studied with the aim to prepare composite monolithic sorbents, highly porous permeable ceramic materials with polymeric coatings. A chelating organoceramic sorbent was prepared by copolymerization of an oligoester with N-vinylcaprolactam on a ceramic support.     

Agglomerated polymer monoliths with bimetallic nano-particles as flow-through micro-reactors

Polymer monoliths in capillary format have been prepared as solid supports for the immobilisation of platinum/palladium bimetallic nano-flowers. Optimum surface coverage of nano-flowers was realised by photografting the monoliths with vinyl azlactone followed by amination with ethylenediamine prior to nano-particle immobilisation. Field emission SEM imaging was used as a characterisation tool for evaluating nano-particle coverage, together with BET surface area analysis to probe the effect of nano-particle immobilisation upon monolith morphology. Ion exchange chromatography was also used to confirm the nature of the covalent attachment of nano-flowers on the monolithic surface. In addition, EDX and ICP analyses were used to quantify platinum and palladium on modified polymer monoliths. Finally the catalytic properties of immobilised bimetallic Pd/Pt nano-flowers were evaluated in flow-through mode, exploiting the porous interconnected flow-paths present in the prepared monoliths (pore diameter~1–2?μm). Specifically, the reduction of Fe (III) to Fe (II) and the oxidation of NADH to NAD⁺ were selected as model redox reactions. The use of a porous polymer monolith as an immobilisation substrate (rather than aminated micro-spheres) eliminated the need for a centrifugation step after the reaction.

Monoliths for fast bioseparation and bioconversion and their applications in biotechnology

Monoliths have consolidated their position in bioseparation. More than 200 different applications have been reported in the past two decades and their advantages compared to conventional chromatography demonstrated. These include the high mass transfer efficiency due to the convective flow enabled by the macroporous character of the matrix. Recently plasmid DNA and viruses were separated with high efficiency and cryogels and monolithic superporous agarose were developed for capture of proteins from crude homogenates and separation of microorganisms or lymphocytes. Currently four companies manufacture monoliths mainly for analytical applications although monoliths with a volume of 0.8 liter are commercially available and 8 L are available as prototypes. A book entitled "Monolithic materials: preparation, properties and applications" was published in 2003 and became standard reference of the status of this area. This review focuses on the progress in monoliths that goes beyond the scope of this reference book. Less progress has been made in the field of bioconversions in spite of the fact that monolithic supports exhibit better performance than beads in enzymatic processing of macromolecules. It appears that the scientific community has not yet realized that supports for these applications are readily available. In addition, monoliths will further substantially advance bioseparations of both small and large molecules in the future.     

Less common applications of monoliths: I. Microscale protein mapping with proteolytic enzymes immobilized on monolithic supports

This review summarizes the recent contributions to the rapidly growing area of immobilized enzymes employing both silica and synthetic polymer-based monoliths as supports. Focus is mainly on immobilized proteolytic enzyme reactors designed for studies in proteomics. Porous monoliths emerged first as a new class of stationary phases for HPLC in the early 1990s. Soon thereafter, they were also used as supports for immobilization of proteins and preparation of both stationary phases for bioaffinity chromatography and enzymatic reactors. Organic polymer-based monoliths are typically prepared using a simple molding process carried out within the confines of a "mold" such as chromatographic column or capillary. Polymerization of a mixture comprising monomers, initiator, and porogenic solvent affords macroporous materials. In contrast, silica-based monoliths are first formed as a rigid rod from tetraalkoxysilane in the presence of PEG and subsequently encased with a plastic tube. Both types of monolith feature large through-pores that enable a rapid flow-through. Since all the solutions must flow through the monolith, the convection considerably accelerates mass transfer within the monolith. As a result, reactors including enzyme immobilized on monolithic support exhibit much higher activity compared to the reactions in solution.     

Recent developments in the field of monolithic stationary phases for capillary electrochromatography

This review summarizes the contributions to the rapidly growing area of monolithic columns based on both silica and synthetic polymers for capillary electrochromatography and chip electrochromatography, with a focus on those published during the year 2004. A wide variety of both modified approaches to the "old" monoliths and new monoliths have been reported despite the very short period of time covered. This demonstrates that monolithic stationary phases have become a well-established format in the field of electrochromatography. The simplicity of their preparation as well as the good control over their porous properties and surface chemistries make the monolithic separation media an attractive alternative to capillary columns packed with particulate materials.     

Affinity chromatography with monolithic capillary columns. II. Polymethacrylate monoliths with immobilized lectins for the separation of glycoconjugates by nano-liquid affinity chromatography

Monolithic capillary columns with surface bound lectin affinity ligands were introduced for performing lectin affinity chromatography (LAC) by nano-liquid chromatography (nano-LC). Two kinds of polymethacrylate monoliths were prepared, namely poly(glycidyl methacrylateco-ethylene dimethacrylate) and poly(glycidyl methacrylate-co-ethylene dimethacrylate-co-[2-(methacryloyloxy)ethyl]trimethyl ammonium chloride) to yield neutral and cationic macroporous polymer, respectively. Two lectins including concanavalin (Con A) and wheat germ agglutinin (WGA) were immobilized onto the monolithic capillary columns. The neutral monoliths with immobilized lectins exhibited lower permeability under pressure driven flow than the cationic monoliths indicating that the latter had wider flow-through pores than the former. Both types of monoliths with immobilized lectins exhibited strong affinity toward particular glycoproteins and their oligosaccharide chains (i.e., glycans) having sugar sequences recognizable by the lectin. Due to the strong binding affinity, the monoliths with surface bound lectins allowed the injection of relatively large volume (i.e., several column volumes) of dilute samples of glycoproteins and glycans thus allowing the concentration of the glycoconjugates and their subsequent isolation and detection at low levels (approximately 10(-8) M). To further exploit the lectin monoliths in the isolation of glycoconjugates, two-dimensional separation schemes involving LAC in the first dimension and reversed-phase nano-LC in the second dimension were introduced. The various interrelated methods established in this investigation are expected to play a major role in advancing the sciences of "nano-glycomics".     

PNIPAAM Grafted Polymeric Monoliths Synthesized by the Reactive Gelation Process and their Swelling/Deswelling Characteristics

The production of macroporous monoliths functionalized with a thermo‐responsive polymer (PNIPAAM) is described. The surface functionalization was achieved by copolymerization of acrylic end capped atom transfer radical polymerization initiator (BPOEA) with divinylbenzene with or without styrene. Monoliths were generated by swelling them with styrene, BPOEA and divinylbenzene followed by gelation with salt and post polymerization. Subsequent grafting of these monoliths with PNIPAAM was achieved by atom transfer radical polymerization and their swelling deswelling characteristics quantified. The grafted monoliths provide a unique chromatographic stationary phase where adsorption/desorption can be driven by the use of temperature only.

     

Microstructure and Porosity of Silica Xerogel Monoliths Prepared by the Fast Sol-Gel Method

An adaptation of the fast sol-gel method to the synthesis of xerogel monoliths using tetramethoxysilane (TMOS) as the alkoxide precursor is described in this paper. The procedure involves running the reaction at 70–80°C in an open vessel, which accelerates hydrolysis and condensation and reduces the amount of liquid by expelling excess methanol through outdistillation. This procedure yields crack-free monoliths. The porosity and microstructure of these xerogel monoliths were studied by using N₂ adsorption and desorption and scanning electron microscopy (SEM). The SEM data show that the solid skeletal phase has a globular morphology with particles, 20–40 nm in diameter, arranged into agglomerates a few hundred nm in diameter. The microstructure of the acid-catalyzed xerogel is a consolidation of these agglomerates. The isotherm data show these xerogels to be microporous. In contrast, the base-catalyzed xerogel has a hierarchical morphology with the clusters of agglomerates organized into larger clusters approaching 1 m in diameter. An analysis of the isotherm data shows these xerogels to be less microporous with a narrow distribution of mesopores having an average diameter of 50 Å.     

One-pot synthesis of an organic-inorganic hybrid affinity monolithic column for specific capture of glycoproteins

An inorganic-organic hybrid affinity monolithic column was synthesized by a novel "one-pot" approach. The resulting hybrid affinity monoliths have potential applications in specific recognition and enrichment of glycoproteins.     

Construction of Large‐Scale Highly Ordered Macroporous Monoliths of π‐Conjugated Polymers

Large scale of well‐ordered macroporous π‐conjugated polymer monoliths have been successfully prepared through a new approach using micrometer‐sized naphthalene crystals as templates. The macroporous monoliths of poly(p‐phenylenevinylene) (PPV) and poly(p‐phenyleneethynylene) (PPE) grew along the unidirectional freezing direction inside the template naphthalene crystals which lead to the formation of controlling morphologies and homogeneous diameters. The polymer monoliths show straight and lamella macroporous structures. The diameters of pores and the thickness of pore walls can be controlled by tuning the freezing temperature.

     

Facile approach to glycidyl methacrylate-based polyHIPE monoliths with high epoxy-group content

This paper reports a facile approach to glycidyl methacrylate (GMA)-based polyHIPE monoliths with high epoxy-group content, which are fabricated using a high internal phase emulsion (HIPE) template via radiation-induced polymerization at room temperature. The effects of the polymerization temperature and the pore sizes of polyHIPE monoliths on the content of epoxy groups are investigated. Results show that the polymerization temperature is the most important factor in influencing the content of epoxy groups in GMA-based polyHIPE monoliths. To prove their superiority over monoliths with low epoxy-group contents, the as-prepared polyHIPE monoliths are applied in phenol removal from cigarette smoke through a reaction between the epoxy group and phenol. The results show that the higher the content of epoxy groups in the polyHIPE monoliths, the higher the rate of phenol removal, indicating their high performance in these specific applications for the polyHIPE monoliths with high epoxy-group contents.     

Voltage-assisted capillary LC of peptides using monolithic capillary columns prepared by ring-opening metathesis polymerization

We examined the use of monolithic capillary columns prepared via ring-opening metathesis polymerization (ROMP) for peptide separation in voltage-assisted capillary LC (voltage-assisted CLC). In order to demonstrate their potential for peptide separation, ROMP-derived monoliths with RP properties were prepared. The preparation procedure of monoliths was transferred from ROMP monoliths optimized for CLC. ROMP monoliths were synthesized within the confines of 200 microm id fused-silica capillaries with a length of 37 cm. After optimization of the chromatographic conditions, the separation performance was tested using a well-defined set of artificial peptides as well as two peptidic mixtures resulting from a tryptic digest of BSA as well as a collagenase digest of collagen. ROMP monoliths showed comparable performance to other monolithic separation media in voltage-assisted CLC published so far. Therefore, we conclude that by optimizing the composition of the ROMP monoliths as well as by using the controlled manner of their functionalization, ROMP monoliths bear a great potential in CLC and CEC.     

Liquid-phase synthesis and application of monolithic porous materials based on organic–inorganic hybrid methylsiloxanes, crosslinked polymers and carbons

Our recent progress in porous materials based on organic–inorganic hybrids, organic crosslinked polymers, and carbons is summarized. Flexible aerogels and aerogel-like xerogels with the polymethylsilsesquioxane (PMSQ) composition are obtained using methyltrimethoxysilane (MTMS) as the sole precursor. Preparation process and the flexible mechanical properties of these aerogels/xerogels are overviewed. As the derivative materials, hierarchically macro- and mesoporous PMSQ monoliths and marshmallow-like soft and bendable porous monoliths prepared from dimethyldimethoxysilane /MTMS co-precursors have been obtained. Organic crosslinked polymer monoliths with well-defined macropores are also tailored using gelling systems of vinyl monomers under controlled/living radical polymerization. The obtained polymer monoliths are carbonized and activated into activated carbon monoliths with well-defined pore properties. The activated carbon monoliths exhibit good electrochemical properties as the monolithic electrode. Some possibilities of applications for these porous materials are also discussed.     

UV-polymerized butyl methacrylate monoliths with embedded carboxylic single-walled carbon nanotubes for CEC applications

The preparation of polymeric monoliths with embedded carboxy-modified single-walled carbon nanotubes (c-SWNTs) and their use for capillary electrochromatography (CEC) is described. Carbon nanotube composites were obtained by preparing a polymerization mixture in the presence of increasing c-SWNT concentrations, followed by UV initiation. The novel stationary phases were studied by optical microscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Raman spectroscopy. Using short UV-polymerization times, the optimized porogenic solvent (a binary mixture of 1,4-butanediol and 2-propanol) gave rise to polymeric beds with homogenously dispersed embedded c-SWNTs. The CEC features of these monoliths were evaluated using polycyclic aromatic hydrocarbons (PAHs), non-steroidal anti-inflammatory drugs (NSAIDs) and chiral compounds. The monolith prepared in the presence of c-SWNTs showed enhanced resolution of the text mixtures, including a remarkable capability to separate enantiomers. Graphical Abstract

UV-polymerized polymeric monoliths with embedded c-SWNTs for CEC applications     

Silica Monolith for the Removal of Pollutants from Gas and Aqueous Phases

This study focused on the application of mesoporous silica monoliths for the removal of organic pollutants. The physico-chemical textural and surface properties of the monoliths were investigated. The homogeneity of the textural properties along the entire length of the monoliths was assessed, as well as the reproducibility of the synthesis method. The adsorption properties of the monoliths for gaseous toluene, as a model of Volatile Organic Compounds (VOCs), were evaluated and compared to those of a reference meso-structured silica powder (MCM-41) of commercial origin. Silica monoliths adsorbed comparable amounts of toluene with respect to MCM-41, with better performances at low pressure. Finally, considering their potential application in water phase, the adsorption properties of monoliths toward Rhodamine B, selected as a model molecule of water soluble pollutants, were studied together with their stability in water. After 24 h of contact, the silica monoliths were able to adsorb up to the 70% of 1.5 × 10⁻² mM Rhodamine B in water solution.     

Homogeneous gels for capillary electrochromatography

Homogeneous gels represent a new type of (electro)chromatographic media possessing unique separation properties unmatched with any other chromatographic beds. It is important to emphasize that they principally differ from continuous beds, polymer rods (better known as monoliths), which are particulate separation media with pores permitting hydrodynamic flow through the columns. Monoliths, thus, are more similar to beds conventionally packed with beads, although the particles building up monolithic columns are usually smaller in size (few submicometers) and covalently linked together. Consequently, homogeneous gels deserve better the term "monoliths" having a non-particulate structure formed by crosslinked free polymer chains (according to a dictionary a monolith is a non-modularized column). The goals of this minireview are to clarify the position of homogeneous gels among the separation media (including polymer solutions), to explain and to exemplify their outstanding (electro)chromatographic properties. This review gives hopefully a complete list of references to homogeneous gels developed for capillary electrochromatography.