The UV photodissociation dynamics of ClO radical using velocity map ion imaging

We have studied the wavelength-dependent photodissociation dynamics of jet-cooled ClO radical from 235 to 291 nm using velocity map ion imaging. We find that Cl(2P(3/2))+O(1D(2)) is the dominant channel above the O(1D(2)) threshold with minor contributions from the Cl(2P(J))+O(3P(J)) and Cl(2P(1/2))+O(1D(2)) channels. We have measured the photofragment angular distributions for each dissociation channel and find that the A 2pi state reached via a parallel transition carries most of the oscillator strength above the O(1D(2)) threshold. The formation of O(3P(J)) fragments with positive anisotropy is evidence of curve crossing from the A 2pi state to one of several dissociative states. The curve crossing probability increases with wavelength in good agreement with previous theoretical calculations. We have directly determined the O(1D(2)) threshold to be 38,050+/-20 cm(-1) by measuring O(1D(2)) quantum yield in the wavelength range of 260-270 nm. We also report on the predissociation dynamics of ClO below the O(1D(2)) threshold. We find that the branching ratio of Cl(2P(3/2))/Cl(2P(1/2)) is 1.5+/-0.1 at both 266 and 291 nm. The rotational depolarization of the anisotropy parameters of the Cl(2P(3/2)) fragments provides predissociation lifetimes of 1.5+/-0.2 ps for the 9-0 band and 1.0+/-0.4 ps for the 8-0 band, in reasonable agreement with previous spectroscopic and theoretical studies.     

Quantum yields for product formation in the 120-133 nm photodissociation of O2

The photodissociation of O(2) in the region from 120-133 nm has been investigated using product imaging. The spectrum in this region is dominated by transitions from the ground state to the first three vibrational levels of the E (3)Sigma(u) (-) state. The O((1)D)+O((3)P) channel is the only product channel observed by product imaging for dissociation at either 124.4 nm or 120.4 nm. The O((1)D(2)) product is aligned in the molecular frame in such a way that its J vector is perpendicular to the relative velocity vector between the O((1)D) and the O((3)P). The variation in the anisotropy of dissociation is approximately predicted by considering transitions on individual lines and then taking into account the coherent excitation of overlapping resonances. At 132.7 nm, both the O((1)D)+O((3)P) and the O((3)P)+O((3)P) channels are observed with branching ratios of 0.40+/-0.08 and 0.60+/-0.09, respectively. At 130.2 nm, the quantum yield for production of O((1)D) is 0.76+/-0.28.     

Photodissociation of the BrO radical using velocity map ion imaging: excited state dynamics and accurate D0(0)(BrO) evaluation

We have studied the photodissociation dynamics of expansion-cooled BrO radical both above (278-281.5 nm) and below (355 nm) the A (2)Pi(3/2) state threshold using velocity map ion imaging. A recently developed late-mixing flash pyrolytic reactor source was utilized to generate an intense BrO radical molecular beam. The relative electronic product branching ratios at 355 nm and from 278 to 281.5 nm were determined. We have investigated the excited state dynamics based on both the product branching and the photofragment angular distributions. We find that above the O((1)D(2)) threshold the contribution of the direct excitation to states other than the A (2)Pi(3/2) state and the role of curve crossing is considerably larger in BrO compared to that observed for ClO, in agreement with recent theoretical studies. The measurement of low velocity photofragments resulting from photodissociation just above the O((1)D(2)) threshold provides an accurate and direct determination of the A (2)Pi(3/2) state dissociation threshold of 35418+/-35 cm(-1), leading to a ground state bond energy of D(0)(0)(BrO)=55.9+/-0.1 kcal/mol.     

Experimental and theoretical study of the reactions between small neutral iron oxide clusters and carbon monoxide

Reactions of small neutral iron oxide clusters (FeO(1-3) and Fe(2)O(4,5)) with carbon monoxide (CO) are investigated by experiments and first-principle calculations. The iron oxide clusters are generated by reaction of laser-ablation-generated iron plasma with O(2) in a supersonic expansion and are reacted with carbon monoxide in a fast flow reactor. Detection of the neutral clusters is through ionization with vacuum UV laser (118 nm) radiation and time-of-flight mass spectrometry. The FeO(2) and FeO(3) neutral clusters are reactive toward CO, whereas Fe(2)O(4), Fe(2)O(5), and possibly FeO are not reactive. A higher reactivity for FeO(2) [sigma(FeO(2) + CO) > 3 x 10(-17) cm(2)] than for FeO(3) [sigma(FeO(3) + CO) approximately 1 x 10(-17) cm(2)] is observed. Density functional theory (DFT) calculations are carried out to interpret the experimental observations and to generate the reaction mechanisms. The reaction pathways with negative or very small overall barriers are identified for CO oxidation by FeO(2) and FeO(3). The lower reactivity of FeO(3) with respect to FeO(2) may be related to a spin inversion process present in the reaction of FeO(3) with CO. Significant reaction barriers are calculated for the reactions of FeO and Fe(2)O(4-5) with CO. The DFT results are in good agreement with experimental observations. Molecular-level reaction mechanisms for CO oxidation by O(2), facilitated by condensed phase iron oxides as catalysts, are suggested.     

C-Cl bond fission dynamics and angular momentum recoupling in the 235 nm photodissociation of allyl chloride

The photodissociation dynamics of allyl chloride at 235 nm producing atomic Cl((2)P(J);J=1/2,3/2) fragments is investigated using a two-dimensional photofragment velocity ion imaging technique. Detection of the Cl((2)P(1/2)) and Cl((2)P(3/2)) products by [2+1] resonance enhanced multiphoton ionization shows that primary C-Cl bond fission of allyl chloride generates 66.8% Cl((2)P(3/2)) and 33.2% Cl((2)P(1/2)). The Cl((2)P(3/2)) fragments evidenced a bimodal translational energy distribution with a relative weight of low kinetic energy Cl((2)P(3/2))/high kinetic energy Cl((2)P(3/2)) of 0.097/0.903. The minor dissociation channel for C-Cl bond fission, producing low kinetic energy chlorine atoms, formed only chlorine atoms in the Cl((2)P(3/2)) spin-orbit state. The dominant C-Cl bond fission channel, attributed to an electronic predissociation that results in high kinetic energy Cl atoms, produced both Cl((2)P(1/2)) and Cl((2)P(3/2)) atomic fragments. The relative branching for this dissociation channel is Cl((2)P(1/2))/[Cl((2)P(1/2))+Cl((2)P(3/2))]=35.5%. The average fraction of available energy imparted into product recoil for the high kinetic energy products was found to be 59%, in qualitative agreement with that predicted by a rigid radical impulsive model. Both the spin-orbit ground and excited chlorine atom angular distributions were close to isotropic. We compare the observed Cl((2)P(1/2))/[Cl((2)P(1/2))+Cl((2)P(3/2))] ratio produced in the electronic predissociation channel of allyl chloride with a prior study of the chlorine atom spin-orbit states produced from HCl photodissociation, concluding that angular momentum recoupling in the exit channel at long interatomic distance determines the chlorine atom spin-orbit branching.     

Communication: branching ratio measurements in the predissociation of 12C16O by time-slice velocity-map ion imaging in the vacuum ultraviolet region

The first direct branching ratio measurement of the three lowest energy dissociation channels of CO that produce C((3)P) + O((3)P), C((1)D) + O((3)P), and C((3)P) + O((1)D) is reported. Rotational resolved carbon ion yield spectra for two Π bands (W(3sσ)(1)Π (v(') = 3) at 108,012.6 cm(-1) and (1)Π(v(') = 2) at 109,017 cm(-1)) and two Σ bands ((4sσ)(1)Σ(+)(v(') = 4) at 109,452 cm(-1) and (4pσ)(1)Σ(+)(v(') = 3) at 109,485 cm(-1)) of CO were obtained. Our measurements show that the branching ratio in this energy region is strongly dependent on the electronic and vibrational energy but it is independent or just weakly dependent on the parity and rotational energy levels. To our knowledge, this is the first time that the triplet channel producing O((1)D) has been experimentally observed and this is also the first time that a direct measurement of the branching ratio for the different channels in the predissociation of CO in this energy region has been made.     

Gaseous rust: thermochemistry of neutral and ionic iron oxides and hydroxides in the gas phase

The experimental and theoretical thermochemistry of the gaseous neutral and ionic iron oxides and hydroxides FeO, FeOH, FeO(2), OFeOH, and Fe(OH)(2) and of the related cationic water complexes Fe(H(2)O)(+), (H(2)O)FeOH(+), and Fe(H(2)O)(2)(+) is analyzed comprehensively. A combination of data for the neutral species with those of the gaseous ions in conjunction with some additional measurements provides a refined and internally consistent compilation of thermochemical data for the neutral and ionic species. In terms of heats of formation at 0 K, the best estimates for the gaseous, mononuclear FeO(m)H(n)(-/0/+/2+) species with m = 1, 2 and n = 0-4 are Delta(f)H(FeO(-)) = (108 +/- 6) kJ/mol, Delta(f)H(FeO) = (252 +/- 6) kJ/mol, Delta(f)H(FeO(+)) = (1088 +/- 6) kJ/mol, Delta(f)H(FeOH) = (129 +/- 15) kJ/mol, Delta(f)H(FeOH(+)) = (870 +/- 15) kJ/mol, Delta(f)H(FeO(2)(-)) = (-161 +/- 13) kJ/mol, Delta(f)H(FeO(2)) = (67 +/- 12) kJ/mol, Delta(f)H(FeO(2)(+)) = (1062 +/- 25) kJ/mol, Delta(f)H(OFeOH) = (-84 +/- 17) kJ/mol, Delta(f)H(OFeOH(+)) = (852 +/- 23) kJ/mol, Delta(f)H(Fe(OH)(2)(-)) = -431 kJ/mol, Delta(f)H(Fe(OH)(2)) = (-322 +/- 2) kJ/mol, and Delta(f)H(Fe(OH)(2)(+)) = (561 +/- 10) kJ/mol for the iron oxides and hydroxides as well as Delta(f)H(Fe(H(2)O)(+)) = (809 +/- 5) kJ/mol, Delta(f)H((H(2)O)FeOH(+)) = 405 kJ/mol, and Delta(f)H(Fe(H(2)O)(2)(+)) = (406 +/- 6) kJ/mol for the cationic water complexes. In addition, charge-stripping data for several of several-iron-containing cations are re-evaluated due to changes in the calibration scheme which lead to Delta(f)H(FeO(2+)) = (2795 +/- 28) kJ/mol, Delta(f)H(FeOH(2+)) = (2447 +/- 30) kJ/mol, Delta(f)H(Fe(H(2)O)(2+)) = (2129 +/- 29) kJ/mol, Delta(f)H((H(2)O)FeOH(2+)) = 1864 kJ/mol, and Delta(f)H(Fe(H(2)O)(2)(2+)) = (1570 +/- 29) kJ/mol, respectively. The present compilation thus provides an almost complete picture of the redox chemistry of mononuclear iron oxides and hydroxides in the gas phase, which serves as a foundation for further experimental studies and may be used as a benchmark database for theoretical studies.     

Ion imaging study of NO3 radical photodissociation dynamics: characterization of multiple reaction pathways

The photodissociation of NO(3) has been studied using velocity map ion imaging. Measurements of the NO(2) + O channel reveal statistical branching ratios of the O((3)P(J)) fine-structure states, isotropic angular distributions, and low product translational energy consistent with barrierless dissociation along the ground state potential surface. There is clear evidence for two distinct pathways to the formation of NO + O(2) products. The dominant pathway (>70% yield) is characterized by vibrationally excited O(2)((3)Σ(g)(-), v = 5-10) and rotationally cold NO((2)Π), while the second pathway is characterized by O(2)((3)Σ(g)(-), v = 0-4) and rotationally hotter NO((2)Π) fragments. We speculate the first pathway has many similarities to the "roaming" dynamics recently implicated in several systems. The rotational angular momentum of the molecular fragments is positively correlated for this channel, suggesting geometric constraints in the dissociation. The second pathway results in almost exclusive formation of NO((2)Π, v = 0). Although product state correlations support dissociation via an as yet unidentified three-center transition state, theoretical confirmation is needed.     

Toward identification of the compound I reactive intermediate in cytochrome P450 chemistry: a QM/MM study of its EPR and Mössbauer parameters

Quantum mechanical/molecular mechanical (QM/MM) methods have been used in conjunction with density functional theory (DFT) and correlated ab initio methods to predict the electron paramagnetic resonance (EPR) and Mossbauer (MB) properties of Compound I in P450(cam). For calibration purposes, a small Fe(IV)-oxo complex [Fe(O)(NH(3))(4)(H(2)O)](2+) was studied. The (3)A(2) and (5)A(1) states (in C(4)(v)() symmetry) are found to be within 0.1-0.2 eV. The large zero-field splitting (ZFS) of the (FeO)(2+) unit in the (3)A(2) state arises from spin-orbit coupling with the low-lying quintet and singlet states. The intrinsic g-anisotropy is very small. The spectroscopic properties of the model complex [Fe(O)(TMC)(CH(3)CN)](2+) (TMC = 1,4,8,11-tetramethyl-1,4,8,11-tetraazacyclotetradecane) are well reproduced by theory. In the model complexes [Fe(O)(TMP)(X)](+) (TMP = tetramesitylporphyrin, X = nothing or H(2)O) the computations again account for the observed spectroscopic properties and predict that the coupling of the (5)A(1) state of the (FeO)(2+) unit to the porphyrin radical leads to a low-lying sextet/quartet manifold approximately 12 kcal/mol above the quartet ground state. The calculations on cytochrome P450(cam), with and without the simulation of the protein environment by point charges, predict a small antiferromagnetic coupling (J approximately -13 to -16 cm(-)(1); H(HDvV) = - 2JS(A)S(B)) and a large ZFS > 15 cm(-)(1) (with E/D approximately 1/3) which will compete with the exchange coupling. This leads to three Kramers doublets of mixed multiplicity which are all populated at room temperature and may therefore contribute to the observed reactivity. The MB and ligand hyperfine couplings ((14)N, (1)H) are fairly sensitive to the protein environment which controls the spin density distribution between the porphyrin ring and the axial cysteinate ligand.     

Experimental and theoretical study of the photodissociation reaction of thiophenol at 243 nm: intramolecular orbital alignment of the phenylthiyl radical

The photoinduced hydrogen (or deuterium) detachment reaction of thiophenol (C(6)H(5)SH) or thiophenol-d(1) (C(6)H(5)SD) pumped at 243 nm has been investigated using the H (D) ion velocity map imaging technique. Photodissociation products, corresponding to the two distinct and anisotropic rings observed in the H (or D) ion images, are identified as the two lowest electronic states of phenylthiyl radical (C(6)H(5)S). Ab initio calculations show that the singly occupied molecular orbital of the phenylthiyl radical is localized on the sulfur atom and it is oriented either perpendicular or parallel to the molecular plane for the ground (B(1)) and the first excited state (B(2)) species, respectively. The experimental energy separation between these two states is 2600+/-200 cm(-1) in excellent agreement with the authors' theoretical prediction of 2674 cm(-1) at the CASPT2 level. The experimental anisotropy parameter (beta) of -1.0+/-0.05 at the large translational energy of D from the C(6)H(5)SD dissociation indicates that the transition dipole moment associated with this optical transition at 243 nm is perpendicular to the dissociating S-D bond, which in turn suggests an ultrafast D+C(6)H(5)S(B(1)) dissociation channel on a repulsive potential energy surface. The reduced anisotropy parameter of -0.76+/-0.04 observed at the smaller translational energy of D suggests that the D+C(6)H(5)S(B(2)) channel may proceed on adiabatic reaction paths resulting from the coupling of the initially excited state to other low-lying electronic states encountered along the reaction coordinate. Detailed high level ab initio calculations adopting multireference wave functions reveal that the C(6)H(5)S(B(1)) channel may be directly accessed via a (1)(n(pi),sigma(*)) photoexcitation at 243 nm while the key feature of the photodissociation dynamics of the C(6)H(5)S(B(2)) channel is the involvement of the (3)(n(pi),pi(*))-->(3)(n(sigma),sigma(*)) profile as well as the spin-orbit induced avoided crossing between the ground and the (3)(n(pi),sigma(*)) state. The S-D bond dissociation energy of thiophenol-d(1) is accurately estimated to be D(0)=79.6+/-0.3 kcalmol. The S-H bond dissociation energy is also estimated to give D(0)=76.8+/-0.3 kcalmol, which is smaller than previously reported ones by at least 2 kcalmol. The C-H bond of the benzene moiety is found to give rise to the H fragment. Ring opening reactions induced by the pi-pi(*)n(pi)-pi(*) transitions followed by internal conversion may be responsible for the isotropic broad translational energy distribution of fragments.     

A crossed molecular beam imaging study of the O(1D2)+HCl-->OH+Cl(2P J=3/2, 1/2) reaction.

A crossed molecular beam study is presented for the O((1)D(2))+HCl-->OH+Cl((2)P(J)) reaction at the collision energy of 6 kcal mol(-1). State-resolved doubly differential cross sections are obtained for the Cl((2)P(J=3/2) ) and Cl*((2)P(J=1/2) ) products by velocity-map ion imaging. Both products are slightly more forward scattered, which suggests a reaction mechanism without a long-lived intermediate in the ground electronic state. A small fraction (23 %) of the energy release into the translational degree of freedom indicates strong internal excitation of the counterpart OH radical. The contribution of the electronic excited states of O--HCl to the overall reaction is also examined from the doubly differential cross sections.     

Photodissociation of van der Waals clusters of isoprene with oxygen, C(5)H(8)-O(2), in the wavelength range 213-277 nm

The speed and angular distribution of O atoms arising from the photofragmentation of C(5)H(8)-O(2), the isoprene-oxygen van der Waals complex, in the wavelength region of 213-277 nm has been studied with the use of a two-color dissociation-probe method and the velocity map imaging technique. Dramatic enhancement in the O atoms photo-generation cross section in comparison with the photodissociation of individual O(2) molecules has been observed. Velocity map images of these "enhanced" O atoms consisted of five channels, different in their kinetic energy, angular distribution, and wavelength dependence. Three channels are deduced to be due to the one-quantum excitation of the C(5)H(8)-O(2) complex into the perturbed Herzberg III state ((3)Δ(u)) of O(2). This excitation results in the prompt dissociation of the complex giving rise to products C(5)H(8)+O+O when the energy of exciting quantum is higher than the complex photodissociation threshold, which is found to be 41740 ± 200 cm(-1) (239.6±1.2 nm). This last threshold corresponds to the photodissociation giving rise to an unexcited isoprene molecule. The second channel, with threshold shifted to the blue by 1480 ± 280 cm(-1), corresponds to dissociation with formation of rovibrationally excited isoprene. A third channel was observed at wavelengths up to 243 nm with excitation below the upper photodissociation threshold. This channel is attributed to dissociation with the formation of a bound O atom C(5)H(8)-O(2) + hv → C(5)H(8)-O(2)((3)Δ(u)) → C(5)H(8)O + O and∕or to dissociation of O(2) with borrowing of the lacking energy from incompletely cooled complex internal degrees of freedom C(5)H(8) (?)-O(2) + hv → C(5)H(8) (?)-O(2)((3)Δ(u)) → C(5)H(8) + O + O. The kinetic energy of the O atoms arising in two other observed channels corresponds to O atoms produced by photodissociation of molecular oxygen in the excited a?(1)Δ(g) and b?(1)Σ(g) (+) singlet states as the precursors. This indicates the formation of singlet oxygen O(2)(a?(1)Δ(g)) and O(2)(b?(1)Σ(g) (+)) after excitation of the C(5)H(8)-O(2) complex. Cooperative excitation of the complex with a simultaneous change of the spin of both partners (1)X-(3)O(2) + hν → (3)X-(1)O(2) → (3)X + (1)O(2) is suggested as a source of singlet oxygen O(2)(a?(1)Δ(g)) and O(2)(b?(1)Σ(g) (+)). This cooperative excitation is in agreement with little or no vibrational excitation of O(2)(a?(1)Δ(g)), produced from the C(5)H(8)-O(2) complex as studied in the current paper as well as from the C(3)H(6)-O(2) and CH(3)I-O(2) complexes reported in our previous paper [Baklanov et al., J. Chem. Phys. 126, 124316 (2007)]. The formation of O(2)(a?(1)Δ(g)) from C(5)H(8)-O(2) was observed at λ(pump) = 213-277 nm with the yield going down towards the long wavelength edge of this interval. This spectral profile is interpreted as the red-side wing of the band of a cooperative transition (1)X-(3)O(2) + hν → (3)X(T(2))-(1)O(2)(a?(1)Δ(g)) in the C(5)H(8)-O(2) complex.     

Dissociation of sulfur dioxide by ultraviolet multiphoton absorption between 224 and 232 nm

Multiphoton excitation and dissociation of SO(2) have been investigated in the wavelength range from 224 to 232 nm. Strong evidence is found for two-photon excitation to the H Rydberg state, followed by dissociation to SO + O and ionization of the SO product by absorption of a third photon. The two-photon excitation is resonantly enhanced via the C (1)B(2) intermediate state, and the two-photon yield spectrum thus bears a strong resemblance to the spectrum of this intermediate. Imaging of the O((3)P(2)), S((1)D(2)), and SO products suggests that, following dissociation of SO(2) from the H state, SO is produced in the A and B electronic states. S((1)D(2)) is produced both from two-photon dissociation of SO(2) to give S((1)D(2)) + O(2) and by single-photon dissociation of SO(+). In the former process, the O(2) is likely formed in all of its lowest three electronic states.     

Photodissociation of nitrous oxide starting from excited bending levels

The photodissociation dynamics of N2O in the wavelength region of 203-205 nm was studied by velocity map ion imaging. A speed resolution of 0.8% was obtained using standard projection imaging and subpixel centroiding calculations. To investigate N2O dissociation starting from the excited bending levels in the ground electronic state, a supersonic molecular beam and an effusive beam were used. The photoabsorption transition probability from the first excited bending level in the wavelength region of 203-205 nm was estimated to be seven times greater than that from the ground vibrational level.     

Description of the geometric and electronic structures responsible for the photoelectron spectrum of FeO4(-)

The relative stabilities of all low-lying conformations of FeO(4)(0/-) stoichiometry were investigated at the quantum mechanical BPW91, CASPT2, and RCCSD(T) levels of theory. For both the anionic and neutral clusters, the determination of the most stable structure appears to be a demanding task. The density functional theory and wave function second-order perturbation theory computational techniques place the doublet state of the tetrahedron-like O(4)Fe(-) conformation substantially lower, up to 0.81 eV, than the doublet state of η(2)-(O(2))FeO(2)(-). The coupled-cluster method reduces the energy difference to less than 0.01 eV. This equal stability of the ground states of O(4)Fe(-) and η(2)-(O(2))FeO(2)(-) leads to the assignment of the experimental photoelectron spectrum of FeO(4)(-). The lowest binding energy band (X band) is ascribed to the (2)A(1) → (1)A(1) ionization of η(2)-(O(2))FeO(2)(-), while the higher energy band (A band) mainly corresponds to the (2)E → (1)A(1) transition between the O(4)Fe(0/-) conformations. For a specific conformation, CASPT2 calculates the best electron detachment energies. The highest energy peak in this band with the weakest intensity could be ascribed to the (2)A(2) → (3)A(2) transition between the η(2)-(O(2))FeO(2) conformations. The two progressions are the result of ionizations from the anti-bonding orbitals of predominant iron 3d. For a specific conformation, CASPT2 calculates the best electron detachment energies. A BPW91 Franck-Condon simulation of the observed vibrational progressions further confirms the proposed assignments.     

Synthesis and characterization of reduced heme and heme/copper carbonmonoxy species

Carbon monoxide readily binds to heme and copper proteins, acting as a competitive inhibitor of dioxygen. As such, CO serves as a probe of protein metal active sites. In our ongoing efforts to mimic the active site of cytochrome c oxidase, reactivity toward carbon monoxide offers a unique opportunity to gain insight into the binding and spectroscopic characteristics of synthetic model compounds. In this paper, we report the synthesis and characterization of CO-adducts of ((5/6)L)Fe(II), [((5/6)L)Fe(II)...Cu(I)](B(C(6)F(5))(4)), and [(TMPA)Cu(I)(CH(3)CN)](B(C(6)F(5))(4)), where TMPA = tris(2-pyridylmethyl)amine and (5/6)L = a tetraarylporphyrinate tethered in either the 5-position ((5)L) or 6-position ((6)L) to a TMPA copper binding moiety. Reaction of ((5/6)L)Fe(II) [in THF (293 K): UV-vis 424 (Soret), 543-544 nm; (1)H NMR delta(pyrrole) 52-59 ppm (4 peaks); (2)H NMR (from ((5)L-d(8))Fe(II)) delta(pyrrole) 53.3, 54.5, 55.8, 56.4 ppm] with CO in solution at RT yielded ((5/6)L)Fe(II)-CO [in THF (293 K): UV-vis 413-414 (Soret), 532-533 nm; IR nu(CO)(Fe) 1976-1978 cm(-1); (1)H NMR delta(pyrrole) 8.8 ppm; (2)H NMR (from ((5)L-d(8))Fe(II)-CO) delta(pyrrole) 8.9 ppm; (13)C NMR delta((CO)Fe) 206.8-207.1 ppm (2 peaks)]. Experiments repeated in acetonitrile, acetone, toluene, and dichloromethane showed similar spectroscopic data. Binding of CO resulted in a change from five-coordinate, high-spin Fe(II) to six-coordinate, low-spin Fe(II), as evidenced by the upfield shift of the pyrrole resonances to the diamagnetic region ((1)H and (2)H NMR spectra). Addition of CO to [((5/6)L)Fe(II)...Cu(I)](B(C(6)F(5))(4)) [in THF (293 K): UV-vis ((6)L only) 424 (Soret), 546 nm; (1)H NMR delta(pyrrole) 54-59 ppm (multiple peaks); (2)H NMR (from [((5)L-d(8))Fe(II).Cu(I)](B(C(6)F(5))(4))) delta(pyrrole) 53.4 ppm (br)] gave the bis-carbonyl adduct [((5/6)L)Fe(II)-CO...Cu(I)-CO](B(C(6)F(5))(4)) [in THF (293 K): UV-vis ((6)L only) 413 (Soret), 532 nm; IR nu(CO)(Fe) 1971-1973 cm(-1), nu(CO)(Cu) 2091-2093 cm(-1), approximately 2070(sh) cm(-1); (1)H NMR delta(pyrrole) 8.7-8.9 ppm; (2)H NMR (from [((5)L-d(8))Fe(II)-CO...Cu(I)-CO](B(C(6)F(5))(4))) delta(pyrrole) 8.9 ppm; (13)C NMR delta((CO)Fe) 206.8-208.1 ppm (2 peaks), delta((CO)Cu) 172.4 ((5)L), 178.2 ((6)L) ppm]. Experiments in acetonitrile, acetone, and toluene exhibited spectral features similar to those reported. The [((5/6)L)Fe(II)-CO.Cu(I)-CO](B(C(6)F(5))(4)) compounds yielded (CO)(Fe) spectra analogous to those seen for ((5/6)L)Fe(II)-CO and (CO)(Cu) spectra similar to those seen for [(TMPA)Cu(I)-CO](B(C(6)F(5))(4)) [in THF (293 K): IR nu(CO)(Cu) 2091 cm(-1), approximately 2070(sh) cm(-1); (13)C NMR delta((CO)Cu) 180.3 ppm]. Additional IR studies were performed in which the [((5)L)Fe(II)-CO...Cu(I)-CO](B(C(6)F(5))(4)) in solution was bubbled with argon in an attempt to generate the iron-only mono-carbonyl [((5)L)Fe(II)-CO.Cu(I)](B(C(6)F(5))(4)) species; in coordinating solvent or with axial base present, decreases in characteristic IR-band intensities revealed complete loss of CO from copper and variable loss of CO from the heme.     

Experimental and theoretical investigations of the reactions NH(X 3Sigma-) + D(2S)-->ND(X 3Sigma-) + H(2S) and NH(X 3Sigma-) + D(2S)-->N(4S) + HD(X 1Sigmag+)

The rate coefficient of the reaction NH(X (3)Sigma(-))+D((2)S)-->(k(1) )products (1) is determined in a quasistatic laser-flash photolysis, laser-induced fluorescence system at low pressures. The NH(X) radicals are produced by quenching of NH(a (1)Delta) (obtained in the photolysis of HN(3)) with Xe and the D atoms are generated in a D(2)/He microwave discharge. The NH(X) concentration profile is measured in the presence of a large excess of D atoms. The room-temperature rate coefficient is determined to be k(1)=(3.9+/-1.5) x 10(13) cm(3) mol(-1) s(-1). The rate coefficient k(1) is the sum of the two rate coefficients, k(1a) and k(1b), which correspond to the reactions NH(X (3)Sigma(-))+D((2)S)-->(k(1a) )ND(X (3)Sigma(-))+H((2)S) (1a) and NH(X (3)Sigma(-))+D((2)S)-->(k(1b) )N((4)S)+HD(X (1)Sigma(g) (+)) (1b), respectively. The first reaction proceeds via the (2)A(") ground state of NH(2) whereas the second one proceeds in the (4)A(") state. A global potential energy surface is constructed for the (2)A(") state using the internally contracted multireference configuration interaction method and the augmented correlation consistent polarized valence quadrupte zeta atomic basis. This potential energy surface is used in classical trajectory calculations to determine k(1a). Similar trajectory calculations are performed for reaction (1b) employing a previously calculated potential for the (4)A(") state. The calculated room-temperature rate coefficient is k(1)=4.1 x 10(13) cm(3) mol(-1) s(-1) with k(1a)=4.0 x 10(13) cm(3) mol(-1) s(-1) and k(1b)=9.1 x 10(11) cm(3) mol(-1) s(-1). The theoretically determined k(1) shows a very weak positive temperature dependence in the range 250< or =TK< or =1000. Despite the deep potential well, the exchange reaction on the (2)A(") ground-state potential energy surface is not statistical.     

Determination by high-frequency and -field EPR of zero-field splitting in iron(IV) oxo complexes: implications for intermediates in nonheme iron enzymes

[Fe(IV)O](2+) species have been implicated as the active form of many nonheme iron enzymes. The electronic structures of iron(IV) oxo complexes are thus of great interest. High-frequency and -field electron paramagnetic resonance is employed to determine accurately the spin Hamiltonian parameters of two stable complexes that contain the FeO unit: [FeO(TMC)(CH 3CN)](CF 3SO 3) 2, where TMC = tetramethylcyclam and [FeO(N4py)](CF 3SO 3) 2, where N4Py = bis(2-pyridylmethyl)bis(2-pyridyl)methylamine. Both complexes exhibit zero-field splittings that are positive, almost perfectly axial, and of very large magnitude: D = +26.95(5) and +22.05(5) cm (-1), respectively. These definitive experimental values can serve as the basis for further computational studies to unravel the electronic structures of such complexes.     

Tuning anisotropy barriers in a family of tetrairon(III) single-molecule magnets with an S = 5 ground state

Tetrairon(III) Single-Molecule Magnets (SMMs) with a propeller-like structure exhibit tuneable magnetic anisotropy barriers in both height and shape. The clusters [Fe4(L1)2(dpm)6] (1), [Fe4(L2)2(dpm)6] (2), [Fe4(L3)2(dpm)6].Et2O (3.Et2O), and [Fe4(OEt)3(L4)(dpm)6] (4) have been prepared by reaction of [Fe4(OMe)6(dpm)6] (5) with tripodal ligands R-C(CH2OH)3 (H3L1, R = Me; H3L2, R = CH2Br; H3L3, R = Ph; H3L4, R = tBu; Hdpm = dipivaloylmethane). The iron(III) ions exhibit a centered-triangular topology and are linked by six alkoxo bridges, which propagate antiferromagnetic interactions resulting in an S = 5 ground spin state. Single crystals of 4 reproducibly contain at least two geometric isomers. From high-frequency EPR studies, the axial zero-field splitting parameter (D) is invariably negative, as found in 5 (D = -0.21 cm(-1)) and amounts to -0.445 cm(-1) in 1, -0.432 cm(-1) in 2, -0.42 cm(-1) in 3.Et2O, and -0.27 cm(-1) in 4 (dominant isomer). The anisotropy barrier Ueff determined by AC magnetic susceptibility measurements is Ueff/kB = 17.0 K in 1, 16.6 K in 2, 15.6 K in 3.Et2O, 5.95 K in 4, and 3.5 K in 5. Both |D| and U(eff) are found to increase with increasing helical pitch of the Fe(O2Fe)3 core. The fourth-order longitudinal anisotropy parameter B4(0), which affects the shape of the anisotropy barrier, concomitantly changes from positive in 1 ("compressed parabola") to negative in 5 ("stretched parabola"). With the aid of spin Hamiltonian calculations the observed trends have been attributed to fine modulation of single-ion anisotropies induced by a change of helical pitch.     

Productions of I, I*, and C2H5 in the A-band photodissociation of ethyl iodide in the wavelength range from 245 to 283 nm by using ion-imaging detection

Photodissociation dynamics of ethyl iodide in the A band has been investigated at several wavelengths between 245 and 283 nm using resonance-enhanced multiphoton ionization technique combined with velocity map ion-imaging detection. The ion images of I, I(*), and C(2)H(5) fragments are analyzed to yield corresponding speed and angular distributions. Two photodissociation channels are found: I(5p (2)P(3/2))+C(2)H(5) (hotter internal states) and I(*)(5p (2)P(1/2))+C(2)H(5) (colder). In addition, a competitive ionization dissociation channel, C(2)H(5)I(+)+h nu-->C(2)H(5)+I(+), appears at the wavelengths <266 nm. The I/I(*) branching of the dissociation channels may be obtained directly from the C(2)H(5) (+) images, yielding the quantum yield of I(*) about 0.63-0.76, comparable to the case of CH(3)I. Anisotropy parameters (beta) determined for the I(*) channel remain at 1.9+/-0.1 over the wavelength range studied, indicating that the I(*) production should originate from the (3)Q(0) state. In contrast, the beta(I) values become smaller above 266 nm, comprising two components, direct excitation of (3)Q(1) and nonadiabatic transition between the (3)Q(0) and (1)Q(1) states. The curve crossing probabilities are determined to be 0.24-0.36, increasing with the wavelength. A heavier branched ethyl group does not significantly enhance the I(5p (2)P(3/2)) production from the nonadiabatic contribution, as compared to the case of CH(3)I.